diff --git a/apix-adc-example/README.md b/apix-adc-example/README.md
index 71fcd6f..b331ce4 100644
--- a/apix-adc-example/README.md
+++ b/apix-adc-example/README.md
@@ -7,9 +7,9 @@ This application enables one ADC channel on the board. After that, the
 application takes periodic samples and prints the raw value and the value in mv.
 
 The ADC lines used in this example are mapped as follows in the Digi boards:
+ - **ConnectCore MP25 DVK**: ANA0 (GPIO connector, J8, Pin 18).
  - **ConnectCore MP13 DVK**: ADC1_INP14 (MikroBus socket, J31, Pin 1).
- - **ConnectCore MP15 DVK**: AN0 (GPIO connector, J41, Pin 4).
- - **ConnectCore MP25 DVK**: ANA0 (GPIO connector, J8, Pin 19).
+ - **ConnectCore MP15 DVK**: ANA0 (GPIO connector, J41, Pin 4).
  - **ConnectCore 93 DVK**: ADC IN0 (GPIO connector, J48, Pin 1).
  - **ConnectCore 91 DVK**:  ADC IN0 (GPIO connector, J48, Pin 1).
  - **ConnectCore 8M Mini DVK**: MCA_IO1 (channel 1) at XBEE1_UART_TX. By default
diff --git a/apix-can-examples/README.md b/apix-can-examples/README.md
index 355afc9..2c2b380 100644
--- a/apix-can-examples/README.md
+++ b/apix-can-examples/README.md
@@ -14,6 +14,11 @@ the ID and print in the console.
 
 The CAN interface for this example depends on the running platform:
 
+ - **ConnectCore MP25 DVK**: CAN connector of the board (J14).
+   - 5V: Pin 1
+   - CAN1_H: Pin 2
+   - CAN1_L: Pin 3
+   - GND: Pin 4
  - **ConnectCore MP13 DVK**: CAN connector of the board (J33).
    - 5V: Pin 1
    - CAN1_H: Pin 2
@@ -24,11 +29,6 @@ The CAN interface for this example depends on the running platform:
    - CAN1_H: Pin 2
    - CAN1_L: Pin 3
    - GND: Pin 4
- - **ConnectCore MP25 DVK**: CAN connector of the board (J14).
-   - 5V: Pin 1
-   - CAN1_H: Pin 2
-   - CAN1_L: Pin 3
-   - GND: Pin 4
  - **ConnectCore 93 DVK**: CAN connector of the board (J15).
    - 5V: Pin 1
    - CAN1_H: Pin 2
diff --git a/apix-gpio-example/README.md b/apix-gpio-example/README.md
index 0d59a93..475fedf 100644
--- a/apix-gpio-example/README.md
+++ b/apix-gpio-example/README.md
@@ -9,15 +9,15 @@ whenever an interrupt is generated in the input GPIO.
 
 The GPIOs lines used in this example are mapped as follows in the Digi boards:
 
+ - **ConnectCore MP25 DVK**:
+  - User button: GPIOF,10 (User Button 1 in the board)
+  - User led: GPIOF,5 (ULED in the board)
  - **ConnectCore MP13 DVK**:
   - User button: GPIOA,13 (User Button 1 in the board)
   - User led: GPIOG,0 (ULED in the board)
  - **ConnectCore MP15 DVK**:
   - User button: GPIOA,13 (User Button 1 in the board)
   - User led: GPIOC,3 (ULED in the board)
- - **ConnectCore MP25 DVK**:
-  - User button: GPIOF,10 (User Button 1 in the board)
-  - User led: GPIOF,5 (ULED in the board)
 - **ConnectCore 93 DVK**:
   - User button: GPIOCHIP2,7 (User Button 1 in the board)
   - User led: USER_LED1 (User Led 1 in the board)
diff --git a/apix-i2c-example/README.md b/apix-i2c-example/README.md
index 8e9d470..7709513 100644
--- a/apix-i2c-example/README.md
+++ b/apix-i2c-example/README.md
@@ -8,6 +8,11 @@ Afterward, it reads the data back to validate it (tested with 24FC1026).
 
 The I2C connections for this example depend on the running platform:
 
+ - **ConnectCore MP25 DVK**: MikroBus connector (J40).
+   - VCC: Pin 7
+   - GND: Pin 8
+   - I2C-1 SDA: Pin 6
+   - I2C-1 SCL: Pin 5
  - **ConnectCore MP13 DVK**: MikroBus connector (J31).
    - VCC: Pin 7
    - GND: Pin 8
@@ -18,11 +23,6 @@ The I2C connections for this example depend on the running platform:
    - GND: Pin 8
    - I2C-6 SDA: Pin 6
    - I2C-6 SCL: Pin 5
- - **ConnectCore MP25 DVK**: MikroBus connector (J40).
-   - VCC: Pin 7
-   - GND: Pin 8
-   - I2C-2 SDA: Pin 6
-   - I2C-2 SCL: Pin 5
  - **ConnectCore 91 DVK**: MikroBus connector (J40).
    - VCC: Pin 7
    - GND: Pin 8
diff --git a/apix-pwm-example/README.md b/apix-pwm-example/README.md
index 8859e00..77e8e25 100644
--- a/apix-pwm-example/README.md
+++ b/apix-pwm-example/README.md
@@ -9,9 +9,9 @@ vice-versa.
 
 The PWM lines used in this example are mapped as follows in the Digi boards:
 
+ - **ConnectCore MP25 DVK**: MikroBus PWM channel 4 - PIN **1** of the MikroBus connector (J40).
  - **ConnectCore MP13 DVK**: MikroBus PWM channel 8 - PIN **1** of the MikroBus connector (J31). Need to add the overlay _ov_board_pwm8_ccmp13-dvk.dtbo
  - **ConnectCore MP15 DVK**: MikroBus PWM channel 4 - PIN **1** of the MikroBus connector (J31).
- - **ConnectCore MP25 DVK**: MikroBus PWM channel 4 - PIN **1** of the MikroBus connector (J40).
  - **ConnectCore 93 DVK**: PWM0 channel 1 shared with LVDS backlight. Need to disable LVDS and enable the PWM channel in the DTB.
  - **ConnectCore 91 DVK**: PWM0 channel 1 shared.
  - **ConnectCore 8M Mini DVK**: MCA PWM0 channel 2 connected to the LED1.
diff --git a/apix-spi-example/README.md b/apix-spi-example/README.md
index 15cfe32..866731c 100644
--- a/apix-spi-example/README.md
+++ b/apix-spi-example/README.md
@@ -11,6 +11,13 @@ the page size and the address size in bytes.
 
 The SPI connections for this example depends on the running platform:
 
+ - **ConnectCore MP25 DVK**: MikroBus connector (J39).
+    - VCC: Pin 7
+    - GND: Pin 8
+    - SPI-0 CLK: 4
+    - SPI-0 MISO: 5
+    - SPI-0 MOSI: 6
+    - SPI-0 SS0: 3
  - **ConnectCore MP13 DVK**: MikroBus connector (J30).
     - VCC: Pin 7
     - GND: Pin 8
@@ -25,13 +32,6 @@ The SPI connections for this example depends on the running platform:
     - SPI-0 MISO: 5
     - SPI-0 MOSI: 6
     - SPI-0 SS0: 3
- - **ConnectCore MP25 DVK**: MikroBus connector (J39).
-    - VCC: Pin 7
-    - GND: Pin 8
-    - SPI-0 CLK: 4
-    - SPI-0 MISO: 5
-    - SPI-0 MOSI: 6
-    - SPI-0 SS0: 3
  - **ConnectCore 91 DVK**: MikroBus connector (J39).
     - VCC: Pin 7
     - GND: Pin 8