diff --git a/apix-adc-example/README.md b/apix-adc-example/README.md
index 2185721..71fcd6f 100644
--- a/apix-adc-example/README.md
+++ b/apix-adc-example/README.md
@@ -10,6 +10,8 @@ The ADC lines used in this example are mapped as follows in the Digi boards:
- **ConnectCore MP13 DVK**: ADC1_INP14 (MikroBus socket, J31, Pin 1).
- **ConnectCore MP15 DVK**: AN0 (GPIO connector, J41, Pin 4).
- **ConnectCore MP25 DVK**: ANA0 (GPIO connector, J8, Pin 19).
+ - **ConnectCore 93 DVK**: ADC IN0 (GPIO connector, J48, Pin 1).
+ - **ConnectCore 91 DVK**: ADC IN0 (GPIO connector, J48, Pin 1).
- **ConnectCore 8M Mini DVK**: MCA_IO1 (channel 1) at XBEE1_UART_TX. By default
this ADC channel is not enabled, you need to modify the device tree.
- **ConnectCore 8M Nano DVK**: MCA_IO1 (channel 1) at XBEE1_UART_TX. By default
diff --git a/apix-can-examples/README.md b/apix-can-examples/README.md
index c45334a..355afc9 100644
--- a/apix-can-examples/README.md
+++ b/apix-can-examples/README.md
@@ -29,6 +29,16 @@ The CAN interface for this example depends on the running platform:
- CAN1_H: Pin 2
- CAN1_L: Pin 3
- GND: Pin 4
+ - **ConnectCore 93 DVK**: CAN connector of the board (J15).
+ - 5V: Pin 1
+ - CAN1_H: Pin 2
+ - CAN1_L: Pin 3
+ - GND: Pin 4
+ - **ConnectCore 91 DVK**: CAN connector of the board (J15).
+ - 5V: Pin 1
+ - CAN1_H: Pin 2
+ - CAN1_L: Pin 3
+ - GND: Pin 4
- **ConnectCore 8M Mini DVK**: CAN connector of the board (J24).
- 5V: Pin 1
- CAN1_H: Pin 2
diff --git a/apix-gpio-example/README.md b/apix-gpio-example/README.md
index 5676c84..0d59a93 100644
--- a/apix-gpio-example/README.md
+++ b/apix-gpio-example/README.md
@@ -18,6 +18,12 @@ The GPIOs lines used in this example are mapped as follows in the Digi boards:
- **ConnectCore MP25 DVK**:
- User button: GPIOF,10 (User Button 1 in the board)
- User led: GPIOF,5 (ULED in the board)
+- **ConnectCore 93 DVK**:
+ - User button: GPIOCHIP2,7 (User Button 1 in the board)
+ - User led: USER_LED1 (User Led 1 in the board)
+- **ConnectCore 91 DVK**:
+ - User button: GPIOCHIP2,7 (User Button 1 in the board)
+ - User led: USER_LED1 (User Led 1 in the board)
- **ConnectCore 8M Mini DVK**:
- User button: MCA_IO10 (User Button 1 in the board)
- User led: USER_LED1 (User Led 1 in the board)
diff --git a/apix-i2c-example/README.md b/apix-i2c-example/README.md
index 96e8c9f..8e9d470 100644
--- a/apix-i2c-example/README.md
+++ b/apix-i2c-example/README.md
@@ -23,6 +23,16 @@ The I2C connections for this example depend on the running platform:
- GND: Pin 8
- I2C-2 SDA: Pin 6
- I2C-2 SCL: Pin 5
+ - **ConnectCore 91 DVK**: MikroBus connector (J40).
+ - VCC: Pin 7
+ - GND: Pin 8
+ - I2C-3 SDA: Pin 6
+ - I2C-3 SCL: Pin 5
+ - **ConnectCore 93 DVK**: MikroBus connector (J40).
+ - VCC: Pin 7
+ - GND: Pin 8
+ - I2C-3 SDA: Pin 6
+ - I2C-3 SCL: Pin 5
- **ConnectCore 8M Mini DVK**: Expansion connector of the board (J48).
- VCC: Connector J52 Pin 7
- GND: Pin 9
diff --git a/apix-pwm-example/README.md b/apix-pwm-example/README.md
index fedd188..8859e00 100644
--- a/apix-pwm-example/README.md
+++ b/apix-pwm-example/README.md
@@ -12,6 +12,8 @@ The PWM lines used in this example are mapped as follows in the Digi boards:
- **ConnectCore MP13 DVK**: MikroBus PWM channel 8 - PIN **1** of the MikroBus connector (J31). Need to add the overlay _ov_board_pwm8_ccmp13-dvk.dtbo
- **ConnectCore MP15 DVK**: MikroBus PWM channel 4 - PIN **1** of the MikroBus connector (J31).
- **ConnectCore MP25 DVK**: MikroBus PWM channel 4 - PIN **1** of the MikroBus connector (J40).
+ - **ConnectCore 93 DVK**: PWM0 channel 1 shared with LVDS backlight. Need to disable LVDS and enable the PWM channel in the DTB.
+ - **ConnectCore 91 DVK**: PWM0 channel 1 shared.
- **ConnectCore 8M Mini DVK**: MCA PWM0 channel 2 connected to the LED1.
- **ConnectCore 8M Nano DVK**: MCA PWM0 channel 2 connected to the LED1.
- **ConnectCore 8X SBC Pro**: MCA PWM2 channel 0 - Pin **A3** of the Expansion connector (J20).
diff --git a/apix-spi-example/README.md b/apix-spi-example/README.md
index b7b9426..15cfe32 100644
--- a/apix-spi-example/README.md
+++ b/apix-spi-example/README.md
@@ -32,6 +32,20 @@ The SPI connections for this example depends on the running platform:
- SPI-0 MISO: 5
- SPI-0 MOSI: 6
- SPI-0 SS0: 3
+ - **ConnectCore 91 DVK**: MikroBus connector (J39).
+ - VCC: Pin 7
+ - GND: Pin 8
+ - SPI-8 CLK: 4
+ - SPI-8 MISO: 5
+ - SPI-8 MOSI: 6
+ - SPI-8 SS0: 3
+ - **ConnectCore 93 DVK**: MikroBus connector (J39).
+ - VCC: Pin 7
+ - GND: Pin 8
+ - SPI-8 CLK: 4
+ - SPI-8 MISO: 5
+ - SPI-8 MOSI: 6
+ - SPI-8 SS0: 3
- **ConnectCore 8X SBC Pro**: Expansion connector of the board (J27).
- VCC: Pin D1
- GND: Pin C1
diff --git a/samples-manifest.xml b/samples-manifest.xml
index b3b1052..fa312d3 100644
--- a/samples-manifest.xml
+++ b/samples-manifest.xml
@@ -18,6 +18,7 @@ application takes periodic samples and prints the raw value and the value in mv.
ccimx8mn-dvk
ccimx8mm-dvk
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -41,6 +42,7 @@ reception using the selected baudrate.
ccimx8mn-dvk
ccimx8mm-dvk
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -65,6 +67,7 @@ whenever an interrupt is generated in the input GPIO.
ccimx8mn-dvk
ccimx8mm-dvk
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -88,6 +91,7 @@ Afterward, it reads the data back to validate it (tested with 24FC1026).
ccimx8mn-dvk
ccimx8mm-dvk
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -133,6 +137,7 @@ vice-versa.
ccimx8x-sbc-pro
ccimx8mn-dvk
ccimx8mm-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -156,6 +161,7 @@ the page size and the address size in bytes.
ccimx8x-sbc-express
ccimx8x-sbc-pro
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -180,6 +186,7 @@ then the device will reboot automatically after the timeout expires.
ccimx8mn-dvk
ccimx8mm-dvk
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -251,6 +258,7 @@ When this request arrives the application sends back the current time.
ccimx8mn-dvk
ccimx8mm-dvk
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -276,6 +284,7 @@ The uploads takes place every 10 new samples, that is every 50 seconds.
ccimx8mn-dvk
ccimx8mm-dvk
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -300,6 +309,7 @@ to stream `binary_dp`.
ccimx8mn-dvk
ccimx8mm-dvk
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk
@@ -321,6 +331,7 @@ Example application to enable/disable maintenance status.
ccimx8mn-dvk
ccimx8mm-dvk
ccimx93-dvk
+ ccimx91-dvk
ccmp15-dvk
ccmp13-dvk
ccmp25-dvk