README.md: Update release notes.

* Add trademark to TrustFence (TM) for consistency.
* Remove CC6UL non-wireless variant from supported products
* Added a note to check the online documentation for an updated known
issues and limitations list.

Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit is contained in:
Alex Gonzalez 2016-08-09 13:49:26 +02:00
parent b8f50680e5
commit 0320e7734e
1 changed files with 7 additions and 5 deletions

View File

@ -28,7 +28,6 @@ Software for the following hardware platforms is in beta support:
* Digi ConnectCore 6UL
* [Digi P/N CC-WMX-JN58-NE](http://www.digi.com/products/models/cc-wmx-jn58-ne)
* [Digi P/N CC-MX-JN58-Z1](http://www.digi.com/products/models/cc-mx-jn58-z1)
* Digi ConnectCore 6UL Starter Kit
* [Digi P/N CC-WMX6UL-START](http://www.digi.com/products/models/cc-wmx6ul-start) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001514/default.htm#concept/yocto/c_get_started_with_yocto.htm))
@ -88,6 +87,9 @@ Documentation is available online on the Digi documentation site:
# Known Issues and Limitations
This is a list of known issues and limitations at the time of release. An
updated list can be found on the online documentation.
* When using the TrustFence (TM) U-Boot environment encryption, access to the
U-Boot environment from the Linux OS is not supported.
@ -109,14 +111,14 @@ modes:
softAP mode
* A maximum of ten connected devices are supported when using Qualcomm's AR6233
Bluetooth Low Energy mode
* When using TrustFence encrypted images secure boot support, the CAAM will
hang the processor when trying to authenticate an encrypted kernel image after
a failed attempt. Hence the target needs to be reset after an authentication
failure.
* NXP i.MX6 processor does not set the sticky bit which write protects the
SRK_REVOKE eFuse on closed devices. This means that in the ConnectCore 6,
key revocation is always possible, no matter the value of the Yocto macro
TRUSTFENCE_UNLOCK_KEY_REVOCATION.
* When using TrustFence (TM) encrypted images secure boot support, the CAAM
will hang the processor when trying to authenticate an encrypted kernel image
after a failed attempt. Hence the target needs to be reset after an
authentication failure.
## Digi ConnectCore 6 SBC