u-boot: boot.txt: move dualboot checks to the top

When DualBoot mechanism is enabled and an update is pending,
the boot script needs to change certain variables and save the
environment.
The regular boot script already changes a number of variables,
such as 'extra_bootargs' and 'overlays' by appending strings to
the already existing values. Saving the envionment may make these
grow endlessly with each iteration of the boot script.

For this reason, move the DualBoot check as the first thing in
the script, save the environment if needed, and then continue
with the normal flow, that changes variables before booting
but doesn't save them.

On certain scripts, this allows us to get rid of some instructions
for resetting the overlays variable.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6qpsbc/boot.txt

@@ -2,28 +2,10 @@
 # U-Boot bootscript for EMMC/SD images created by Yocto.
 #
 
-# Back up environment variables
+# As the first step in the boot script, check if we are using DualBoot and
-setenv ORIG_extra_bootargs ${extra_bootargs}
+# if an upgrade is available. This requires the script to change some variables
-
+# and save them, while the rest of the script changes variables only temporarily
-#
+# without saving them.
-# Set device tree filename depending on the board ID (if defined)
-#
-if test -n "${board_id}"; then
-	setenv fdt_file imx6qp-ccimx6qpsbc-id${board_id}.dtb
-else
-	#
-	# Set device tree filename depending on the hardware variant
-	#
-	if test "${module_variant}" = "0x01"; then
-		setenv fdt_file imx6qp-ccimx6qpsbc-wb.dtb
-	elif test "${module_variant}" = "0x02"; then
-		setenv fdt_file imx6qp-ccimx6qpsbc-wb.dtb
-	elif test "${module_variant}" = "0x03"; then
-		setenv fdt_file imx6qp-ccimx6qpsbc.dtb
-	else
-		setenv fdt_file imx6qp-ccimx6qpsbc-wb.dtb
-	fi
-fi
 
 # Dual boot update verification
 if test "${dualboot}" = "yes"; then
@@ -90,6 +72,31 @@ else
 		setenv mmcroot /dev/mmcblk${mmcbootdev}p2
 	fi
 fi
+
+
+# Back up environment variables
+setenv ORIG_extra_bootargs ${extra_bootargs}
+
+#
+# Set device tree filename depending on the board ID (if defined)
+#
+if test -n "${board_id}"; then
+	setenv fdt_file imx6qp-ccimx6qpsbc-id${board_id}.dtb
+else
+	#
+	# Set device tree filename depending on the hardware variant
+	#
+	if test "${module_variant}" = "0x01"; then
+		setenv fdt_file imx6qp-ccimx6qpsbc-wb.dtb
+	elif test "${module_variant}" = "0x02"; then
+		setenv fdt_file imx6qp-ccimx6qpsbc-wb.dtb
+	elif test "${module_variant}" = "0x03"; then
+		setenv fdt_file imx6qp-ccimx6qpsbc.dtb
+	else
+		setenv fdt_file imx6qp-ccimx6qpsbc-wb.dtb
+	fi
+fi
+
 setenv extra_bootargs fbcon=logo-pos:center ${extra_bootargs}
 dboot linux mmc ${mmcbootdev}:${mmcpart}
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6sbc/boot.txt

@@ -2,56 +2,10 @@
 # U-Boot bootscript for EMMC/SD images created by Yocto.
 #
 
-# Back up environment variables
+# As the first step in the boot script, check if we are using DualBoot and
-setenv ORIG_extra_bootargs ${extra_bootargs}
+# if an upgrade is available. This requires the script to change some variables
-
+# and save them, while the rest of the script changes variables only temporarily
-#
+# without saving them.
-# Set device tree filename depending on the board ID (if defined)
-#
-if test -n "${board_id}"; then
-	setenv fdt_file ${soc_family}-ccimx6sbc-id${board_id}.dtb
-else
-	#
-	# Set device tree filename depending on the hardware variant
-	#
-	if test "${module_variant}" = "0x02"; then
-		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
-	elif test "${module_variant}" = "0x03"; then
-		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
-	elif test "${module_variant}" = "0x04"; then
-		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
-	elif test "${module_variant}" = "0x05"; then
-		setenv fdt_file imx6q-ccimx6sbc-w.dtb
-	elif test "${module_variant}" = "0x06"; then
-		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
-	elif test "${module_variant}" = "0x08"; then
-		setenv fdt_file imx6q-ccimx6sbc.dtb
-	elif test "${module_variant}" = "0x0a"; then
-		setenv fdt_file imx6dl-ccimx6sbc-w.dtb
-	elif test "${module_variant}" = "0x0b"; then
-		setenv fdt_file imx6dl-ccimx6sbc-wb.dtb
-	elif test "${module_variant}" = "0x0c"; then
-		setenv fdt_file imx6dl-ccimx6sbc.dtb
-	elif test "${module_variant}" = "0x0e"; then
-		setenv fdt_file imx6q-ccimx6sbc.dtb
-	elif test "${module_variant}" = "0x0f"; then
-		setenv fdt_file imx6q-ccimx6sbc.dtb
-	elif test "${module_variant}" = "0x11"; then
-		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
-	elif test "${module_variant}" = "0x12"; then
-		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
-	elif test "${module_variant}" = "0x13"; then
-		setenv fdt_file imx6dl-ccimx6sbc-wb.dtb
-	elif test "${module_variant}" = "0x14"; then
-		setenv fdt_file imx6q-ccimx6sbc.dtb
-	elif test "${module_variant}" = "0x15"; then
-		setenv fdt_file imx6dl-ccimx6sbc.dtb
-	elif test "${module_variant}" = "0x16"; then
-		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
-	else
-		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
-	fi
-fi
 
 # Dual boot update verification
 if test "${dualboot}" = "yes"; then
@@ -118,6 +72,59 @@ else
 		setenv mmcroot /dev/mmcblk${mmcbootdev}p2
 	fi
 fi
+
+
+# Back up environment variables
+setenv ORIG_extra_bootargs ${extra_bootargs}
+
+#
+# Set device tree filename depending on the board ID (if defined)
+#
+if test -n "${board_id}"; then
+	setenv fdt_file ${soc_family}-ccimx6sbc-id${board_id}.dtb
+else
+	#
+	# Set device tree filename depending on the hardware variant
+	#
+	if test "${module_variant}" = "0x02"; then
+		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x03"; then
+		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x04"; then
+		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x05"; then
+		setenv fdt_file imx6q-ccimx6sbc-w.dtb
+	elif test "${module_variant}" = "0x06"; then
+		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x08"; then
+		setenv fdt_file imx6q-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x0a"; then
+		setenv fdt_file imx6dl-ccimx6sbc-w.dtb
+	elif test "${module_variant}" = "0x0b"; then
+		setenv fdt_file imx6dl-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x0c"; then
+		setenv fdt_file imx6dl-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x0e"; then
+		setenv fdt_file imx6q-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x0f"; then
+		setenv fdt_file imx6q-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x11"; then
+		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x12"; then
+		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x13"; then
+		setenv fdt_file imx6dl-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x14"; then
+		setenv fdt_file imx6q-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x15"; then
+		setenv fdt_file imx6dl-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x16"; then
+		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
+	else
+		setenv fdt_file imx6q-ccimx6sbc-wb.dtb
+	fi
+fi
+
 setenv extra_bootargs fbcon=logo-pos:center ${extra_bootargs}
 dboot linux mmc ${mmcbootdev}:${mmcpart}
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6ulsbc/boot.txt

@@ -2,40 +2,10 @@
 # U-Boot bootscript for NAND images created by Yocto.
 #
 
-# Back up environment variables
+# As the first step in the boot script, check if we are using DualBoot and
-setenv ORIG_extra_bootargs ${extra_bootargs}
+# if an upgrade is available. This requires the script to change some variables
-
+# and save them, while the rest of the script changes variables only temporarily
-#
+# without saving them.
-# Set device tree filename depending on the board ID (if defined)
-#
-if test -n "${board_id}"; then
-	setenv fdt_file imx6ul-ccimx6ulsbc-id${board_id}.dtb
-else
-	#
-	# Set device tree filename depending on the hardware variant
-	#
-	if test "${module_variant}" = "0x02"; then
-		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
-	elif test "${module_variant}" = "0x03"; then
-		setenv fdt_file imx6ul-ccimx6ulsbc.dtb
-	elif test "${module_variant}" = "0x04"; then
-		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
-	elif test "${module_variant}" = "0x05"; then
-		setenv fdt_file imx6ul-ccimx6ulsbc.dtb
-	elif test "${module_variant}" = "0x06"; then
-		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
-	elif test "${module_variant}" = "0x07"; then
-		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
-	elif test "${module_variant}" = "0x08"; then
-		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
-	elif test "${module_variant}" = "0x09"; then
-		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
-	elif test "${module_variant}" = "0x0a"; then
-		setenv fdt_file imx6ul-ccimx6ulsbc.dtb
-	else
-		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
-	fi
-fi
 
 # Dual boot update verification
 if test "${dualboot}" = "yes"; then
@@ -81,6 +51,43 @@ else
 		true
 	fi
 fi
+
+
+# Back up environment variables
+setenv ORIG_extra_bootargs ${extra_bootargs}
+
+#
+# Set device tree filename depending on the board ID (if defined)
+#
+if test -n "${board_id}"; then
+	setenv fdt_file imx6ul-ccimx6ulsbc-id${board_id}.dtb
+else
+	#
+	# Set device tree filename depending on the hardware variant
+	#
+	if test "${module_variant}" = "0x02"; then
+		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
+	elif test "${module_variant}" = "0x03"; then
+		setenv fdt_file imx6ul-ccimx6ulsbc.dtb
+	elif test "${module_variant}" = "0x04"; then
+		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
+	elif test "${module_variant}" = "0x05"; then
+		setenv fdt_file imx6ul-ccimx6ulsbc.dtb
+	elif test "${module_variant}" = "0x06"; then
+		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
+	elif test "${module_variant}" = "0x07"; then
+		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
+	elif test "${module_variant}" = "0x08"; then
+		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
+	elif test "${module_variant}" = "0x09"; then
+		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
+	elif test "${module_variant}" = "0x0a"; then
+		setenv fdt_file imx6ul-ccimx6ulsbc.dtb
+	else
+		setenv fdt_file imx6ul-ccimx6ulsbc-wb.dtb
+	fi
+fi
+
 setenv extra_bootargs fbcon=logo-pos:center ${extra_bootargs}
 dboot linux nand ${mtdbootpart}
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6ulstarter/boot.txt

@@ -2,40 +2,10 @@
 # U-Boot bootscript for NAND images created by Yocto.
 #
 
-# Back up environment variables
+# As the first step in the boot script, check if we are using DualBoot and
-setenv ORIG_extra_bootargs ${extra_bootargs}
+# if an upgrade is available. This requires the script to change some variables
-
+# and save them, while the rest of the script changes variables only temporarily
-#
+# without saving them.
-# Set device tree filename depending on the board ID (if defined)
-#
-if test -n "${board_id}"; then
-	setenv fdt_file imx6ul-ccimx6ulstarter-id${board_id}.dtb
-else
-	#
-	# Set device tree filename depending on the hardware variant
-	#
-	if test "${module_variant}" = "0x02"; then
-		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
-	elif test "${module_variant}" = "0x03"; then
-		setenv fdt_file imx6ul-ccimx6ulstarter.dtb
-	elif test "${module_variant}" = "0x04"; then
-		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
-	elif test "${module_variant}" = "0x05"; then
-		setenv fdt_file imx6ul-ccimx6ulstarter.dtb
-	elif test "${module_variant}" = "0x06"; then
-		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
-	elif test "${module_variant}" = "0x07"; then
-		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
-	elif test "${module_variant}" = "0x08"; then
-		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
-	elif test "${module_variant}" = "0x09"; then
-		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
-	elif test "${module_variant}" = "0x0a"; then
-		setenv fdt_file imx6ul-ccimx6ulstarter.dtb
-	else
-		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
-	fi
-fi
 
 # Dual boot update verification
 if test "${dualboot}" = "yes"; then
@@ -81,6 +51,43 @@ else
 		true
 	fi
 fi
+
+
+# Back up environment variables
+setenv ORIG_extra_bootargs ${extra_bootargs}
+
+#
+# Set device tree filename depending on the board ID (if defined)
+#
+if test -n "${board_id}"; then
+	setenv fdt_file imx6ul-ccimx6ulstarter-id${board_id}.dtb
+else
+	#
+	# Set device tree filename depending on the hardware variant
+	#
+	if test "${module_variant}" = "0x02"; then
+		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
+	elif test "${module_variant}" = "0x03"; then
+		setenv fdt_file imx6ul-ccimx6ulstarter.dtb
+	elif test "${module_variant}" = "0x04"; then
+		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
+	elif test "${module_variant}" = "0x05"; then
+		setenv fdt_file imx6ul-ccimx6ulstarter.dtb
+	elif test "${module_variant}" = "0x06"; then
+		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
+	elif test "${module_variant}" = "0x07"; then
+		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
+	elif test "${module_variant}" = "0x08"; then
+		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
+	elif test "${module_variant}" = "0x09"; then
+		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
+	elif test "${module_variant}" = "0x0a"; then
+		setenv fdt_file imx6ul-ccimx6ulstarter.dtb
+	else
+		setenv fdt_file imx6ul-ccimx6ulstarter-wb.dtb
+	fi
+fi
+
 setenv extra_bootargs fbcon=logo-pos:center ${extra_bootargs}
 dboot linux nand ${mtdbootpart}
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8mm-dvk/boot.txt

@@ -2,44 +2,10 @@
 # U-Boot bootscript for EMMC/SD images created by Yocto.
 #
 
-# Back up environment variables
+# As the first step in the boot script, check if we are using DualBoot and
-setenv ORIG_overlays ${overlays}
+# if an upgrade is available. This requires the script to change some variables
-setenv ORIG_extra_bootargs ${extra_bootargs}
+# and save them, while the rest of the script changes variables only temporarily
-
+# without saving them.
-# Set SOC type to "imx8mm" if not already defined by U-Boot
-if test ! -n "${soc_type}"; then
-	setenv soc_type "imx8mm"
-fi
-
-# Reset overlays when using dualboot mode, because we need to
-# save the environment in case of an installation fall back.
-if test "${dual_boot}" = "yes"; then
-        if test -n "${overlays}"; then
-                setenv overlays
-        fi
-fi
-
-#
-# Determine overlays to apply depending on the hardware capabilities
-# described by the HWID, SOM version, and carrier board version.
-#
-if test -n "${module_ram}"; then
-	setexpr som_hv ${hwid_2} \& 38
-	setexpr som_hv ${som_hv} / 8
-
-	setexpr module_has_wifi ${hwid_2} \& 10000
-	setexpr module_has_wifi ${module_has_wifi} / 10000
-	setexpr module_has_bt ${hwid_2} \& 20000
-	setexpr module_has_bt ${module_has_bt} / 20000
-
-	if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
-		setenv overlays _ov_som_bt_ccimx8m.dtbo,${overlays}
-	fi
-
-	if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
-		setenv overlays _ov_som_wifi_ccimx8m.dtbo,${overlays}
-	fi
-fi
 
 # Dual boot update verification
 if test "${dualboot}" = "yes"; then
@@ -106,6 +72,39 @@ else
 		setenv mmcroot /dev/mmcblk${mmcbootdev}p2
 	fi
 fi
+
+
+# Back up environment variables
+setenv ORIG_overlays ${overlays}
+setenv ORIG_extra_bootargs ${extra_bootargs}
+
+# Set SOC type to "imx8mm" if not already defined by U-Boot
+if test ! -n "${soc_type}"; then
+	setenv soc_type "imx8mm"
+fi
+
+#
+# Determine overlays to apply depending on the hardware capabilities
+# described by the HWID, SOM version, and carrier board version.
+#
+if test -n "${module_ram}"; then
+	setexpr som_hv ${hwid_2} \& 38
+	setexpr som_hv ${som_hv} / 8
+
+	setexpr module_has_wifi ${hwid_2} \& 10000
+	setexpr module_has_wifi ${module_has_wifi} / 10000
+	setexpr module_has_bt ${hwid_2} \& 20000
+	setexpr module_has_bt ${module_has_bt} / 20000
+
+	if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
+		setenv overlays _ov_som_bt_ccimx8m.dtbo,${overlays}
+	fi
+
+	if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
+		setenv overlays _ov_som_wifi_ccimx8m.dtbo,${overlays}
+	fi
+fi
+
 setenv extra_bootargs fbcon=logo-pos:center ${extra_bootargs}
 dboot linux mmc ${mmcbootdev}:${mmcpart}
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8mn-dvk/boot.txt

@@ -2,53 +2,10 @@
 # U-Boot bootscript for EMMC/SD images created by Yocto.
 #
 
-# Back up environment variables
+# As the first step in the boot script, check if we are using DualBoot and
-setenv ORIG_overlays ${overlays}
+# if an upgrade is available. This requires the script to change some variables
-setenv ORIG_extra_bootargs ${extra_bootargs}
+# and save them, while the rest of the script changes variables only temporarily
-
+# without saving them.
-# Set SOC type to "imx8mn" if not already defined by U-Boot
-if test ! -n "${soc_type}"; then
-	setenv soc_type "imx8mn"
-fi
-
-# Reset overlays when using dualboot mode, because we need to
-# save the environment in case of an installation fall back.
-if test "${dual_boot}" = "yes"; then
-        if test -n "${overlays}"; then
-                setenv overlays
-        fi
-fi
-
-#
-# Determine overlays to apply depending on the hardware capabilities
-# described by the HWID, SOM version, and carrier board version.
-#
-if test -n "${module_ram}"; then
-	setexpr som_hv ${hwid_2} \& 38
-	setexpr som_hv ${som_hv} / 8
-
-	setexpr module_has_wifi ${hwid_2} \& 10000
-	setexpr module_has_wifi ${module_has_wifi} / 10000
-	setexpr module_has_bt ${hwid_2} \& 20000
-	setexpr module_has_bt ${module_has_bt} / 20000
-
-	if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
-		setenv overlays _ov_som_bt_ccimx8m.dtbo,${overlays}
-	fi
-
-	if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
-		setenv overlays _ov_som_wifi_ccimx8m.dtbo,${overlays}
-	fi
-
-	if test "${som_hv}" = "1"; then
-		setenv overlays _ov_som_v1_ccimx8mn.dtbo,${overlays}
-	fi
-fi
-
-# Apply DVK v1-v2 overlay if the board version is < 3
-if test "${board_version}" -lt "3"; then
-	setenv overlays _ov_board_v1-v2_ccimx8mn-dvk.dtbo,${overlays}
-fi
 
 # Dual boot update verification
 if test "${dualboot}" = "yes"; then
@@ -68,7 +25,7 @@ if test "${dualboot}" = "yes"; then
 			else
 				part number mmc ${mmcbootdev} linux_a pi
 				setenv mmcpart ${pi}
-				# Save the partition index on variable rootfs_b_index
+				# Save the partition index on variable rootfs_a_index
 				part number mmc ${mmcbootdev} rootfs_a rootfs_a_index
 				# Save the rootfs_a UUID into mmcroot_a
 				part uuid mmc ${mmcbootdev}:${rootfs_a_index} mmcroot_a
@@ -115,6 +72,48 @@ else
 		setenv mmcroot /dev/mmcblk${mmcbootdev}p2
 	fi
 fi
+
+
+# Back up environment variables
+setenv ORIG_overlays ${overlays}
+setenv ORIG_extra_bootargs ${extra_bootargs}
+
+# Set SOC type to "imx8mn" if not already defined by U-Boot
+if test ! -n "${soc_type}"; then
+	setenv soc_type "imx8mn"
+fi
+
+#
+# Determine overlays to apply depending on the hardware capabilities
+# described by the HWID, SOM version, and carrier board version.
+#
+if test -n "${module_ram}"; then
+	setexpr som_hv ${hwid_2} \& 38
+	setexpr som_hv ${som_hv} / 8
+
+	setexpr module_has_wifi ${hwid_2} \& 10000
+	setexpr module_has_wifi ${module_has_wifi} / 10000
+	setexpr module_has_bt ${hwid_2} \& 20000
+	setexpr module_has_bt ${module_has_bt} / 20000
+
+	if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
+		setenv overlays _ov_som_bt_ccimx8m.dtbo,${overlays}
+	fi
+
+	if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
+		setenv overlays _ov_som_wifi_ccimx8m.dtbo,${overlays}
+	fi
+
+	if test "${som_hv}" = "1"; then
+		setenv overlays _ov_som_v1_ccimx8mn.dtbo,${overlays}
+	fi
+fi
+
+# Apply DVK v1-v2 overlay if the board version is < 3
+if test "${board_version}" -lt "3"; then
+	setenv overlays _ov_board_v1-v2_ccimx8mn-dvk.dtbo,${overlays}
+fi
+
 setenv extra_bootargs fbcon=logo-pos:center ${extra_bootargs}
 dboot linux mmc ${mmcbootdev}:${mmcpart}
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8x-sbc-express/boot.txt

@@ -2,56 +2,10 @@
 # U-Boot bootscript for EMMC/SD images created by Yocto.
 #
 
-# Back up environment variables
+# As the first step in the boot script, check if we are using DualBoot and
-setenv ORIG_overlays ${overlays}
+# if an upgrade is available. This requires the script to change some variables
-setenv ORIG_extra_bootargs ${extra_bootargs}
+# and save them, while the rest of the script changes variables only temporarily
-
+# without saving them.
-# Set SOC type to "imx8qxp" if not already defined by U-Boot
-if test ! -n "${soc_type}"; then
-	setenv soc_type "imx8qxp"
-fi
-
-# Reset overlays when using dualboot mode, because we need to
-# save the environment in case of an installation fall back.
-if test "${dual_boot}" = "yes"; then
-	if test -n "${overlays}"; then
-		setenv overlays
-	fi
-fi
-
-#
-# Determine overlays to apply depending on the hardware capabilities
-# described by the HWID, SOM version, and carrier board version.
-#
-if test -n "${module_ram}"; then
-	setexpr module_has_wifi ${hwid_3} \& 1
-	setexpr module_has_bt ${hwid_3} \& 2
-	setexpr module_has_bt ${module_has_bt} / 2
-
-	if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
-		setenv overlays _ov_som_bt_ccimx8x.dtbo,${overlays}
-	fi
-
-	if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
-		setenv overlays _ov_som_wifi_ccimx8x.dtbo,${overlays}
-	fi
-else
-	#
-	# Set overlays depending on the hardware variant
-	#
-	if test "${module_variant}" = "0x01"; then
-		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
-	elif test "${module_variant}" = "0x02"; then
-		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
-	elif test "${module_variant}" = "0x04"; then
-		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
-	fi
-fi
-
-# Apply QXP overlay if the SOC type is "imx8qxp"
-if test "${soc_type}" = "imx8qxp"; then
-	setenv overlays _ov_som_quad_ccimx8x.dtbo,${overlays}
-fi
 
 # Dual boot update verification
 if test "${dualboot}" = "yes"; then
@@ -118,6 +72,51 @@ else
 		setenv mmcroot /dev/mmcblk${mmcbootdev}p2
 	fi
 fi
+
+
+# Back up environment variables
+setenv ORIG_overlays ${overlays}
+setenv ORIG_extra_bootargs ${extra_bootargs}
+
+# Set SOC type to "imx8qxp" if not already defined by U-Boot
+if test ! -n "${soc_type}"; then
+	setenv soc_type "imx8qxp"
+fi
+
+#
+# Determine overlays to apply depending on the hardware capabilities
+# described by the HWID, SOM version, and carrier board version.
+#
+if test -n "${module_ram}"; then
+	setexpr module_has_wifi ${hwid_3} \& 1
+	setexpr module_has_bt ${hwid_3} \& 2
+	setexpr module_has_bt ${module_has_bt} / 2
+
+	if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
+		setenv overlays _ov_som_bt_ccimx8x.dtbo,${overlays}
+	fi
+
+	if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
+		setenv overlays _ov_som_wifi_ccimx8x.dtbo,${overlays}
+	fi
+else
+	#
+	# Set overlays depending on the hardware variant
+	#
+	if test "${module_variant}" = "0x01"; then
+		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
+	elif test "${module_variant}" = "0x02"; then
+		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
+	elif test "${module_variant}" = "0x04"; then
+		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
+	fi
+fi
+
+# Apply QXP overlay if the SOC type is "imx8qxp"
+if test "${soc_type}" = "imx8qxp"; then
+	setenv overlays _ov_som_quad_ccimx8x.dtbo,${overlays}
+fi
+
 setenv extra_bootargs fbcon=logo-pos:center ${extra_bootargs}
 dboot linux mmc ${mmcbootdev}:${mmcpart}
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8x-sbc-pro/boot.txt

@@ -2,61 +2,10 @@
 # U-Boot bootscript for EMMC/SD images created by Yocto.
 #
 
-# Back up environment variables
+# As the first step in the boot script, check if we are using DualBoot and
-setenv ORIG_overlays ${overlays}
+# if an upgrade is available. This requires the script to change some variables
-setenv ORIG_extra_bootargs ${extra_bootargs}
+# and save them, while the rest of the script changes variables only temporarily
-
+# without saving them.
-# Set SOC type to "imx8qxp" if not already defined by U-Boot
-if test ! -n "${soc_type}"; then
-	setenv soc_type "imx8qxp"
-fi
-
-# Reset overlays when using dualboot mode, because we need to
-# save the environment in case of an installation fall back.
-if test "${dual_boot}" = "yes"; then
-	if test -n "${overlays}"; then
-		setenv overlays
-	fi
-fi
-
-#
-# Determine overlays to apply depending on the hardware capabilities
-# described by the HWID, SOM version, and carrier board version.
-#
-if test -n "${module_ram}"; then
-	setexpr module_has_wifi ${hwid_3} \& 1
-	setexpr module_has_bt ${hwid_3} \& 2
-	setexpr module_has_bt ${module_has_bt} / 2
-
-	if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
-		setenv overlays _ov_som_bt_ccimx8x.dtbo,${overlays}
-	fi
-
-	if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
-		setenv overlays _ov_som_wifi_ccimx8x.dtbo,${overlays}
-	fi
-else
-	#
-	# Set overlays depending on the hardware variant
-	#
-	if test "${module_variant}" = "0x01"; then
-		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
-	elif test "${module_variant}" = "0x02"; then
-		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
-	elif test "${module_variant}" = "0x04"; then
-		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
-	fi
-fi
-
-# Apply QXP overlay if the SOC type is "imx8qxp"
-if test "${soc_type}" = "imx8qxp"; then
-	setenv overlays _ov_som_quad_ccimx8x.dtbo,${overlays}
-fi
-
-# Apply SBCv3 overlay if the board_version is 3 or lesser
-if test "${board_version}" -le "3"; then
-	setenv overlays _ov_board_v1-v3_ccimx8x-sbc-pro.dtbo,${overlays}
-fi
 
 # Dual boot update verification
 if test "${dualboot}" = "yes"; then
@@ -123,6 +72,56 @@ else
 		setenv mmcroot /dev/mmcblk${mmcbootdev}p2
 	fi
 fi
+
+
+# Back up environment variables
+setenv ORIG_overlays ${overlays}
+setenv ORIG_extra_bootargs ${extra_bootargs}
+
+# Set SOC type to "imx8qxp" if not already defined by U-Boot
+if test ! -n "${soc_type}"; then
+	setenv soc_type "imx8qxp"
+fi
+
+#
+# Determine overlays to apply depending on the hardware capabilities
+# described by the HWID, SOM version, and carrier board version.
+#
+if test -n "${module_ram}"; then
+	setexpr module_has_wifi ${hwid_3} \& 1
+	setexpr module_has_bt ${hwid_3} \& 2
+	setexpr module_has_bt ${module_has_bt} / 2
+
+	if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
+		setenv overlays _ov_som_bt_ccimx8x.dtbo,${overlays}
+	fi
+
+	if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
+		setenv overlays _ov_som_wifi_ccimx8x.dtbo,${overlays}
+	fi
+else
+	#
+	# Set overlays depending on the hardware variant
+	#
+	if test "${module_variant}" = "0x01"; then
+		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
+	elif test "${module_variant}" = "0x02"; then
+		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
+	elif test "${module_variant}" = "0x04"; then
+		setenv overlays _ov_som_bt_ccimx8x.dtbo,_ov_som_wifi_ccimx8x.dtbo,${overlays}
+	fi
+fi
+
+# Apply QXP overlay if the SOC type is "imx8qxp"
+if test "${soc_type}" = "imx8qxp"; then
+	setenv overlays _ov_som_quad_ccimx8x.dtbo,${overlays}
+fi
+
+# Apply SBCv3 overlay if the board_version is 3 or lesser
+if test "${board_version}" -le "3"; then
+	setenv overlays _ov_board_v1-v3_ccimx8x-sbc-pro.dtbo,${overlays}
+fi
+
 setenv extra_bootargs fbcon=logo-pos:center ${extra_bootargs}
 dboot linux mmc ${mmcbootdev}:${mmcpart}