meta-digi-arm: add support for ConnectCore MP13 DVK platform
https://onedigi.atlassian.net/browse/DEL-8078 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit is contained in:
Arturo Buzarra
parent
04e2d880ad
commit
0ed6c4d66b
|
|
@ -0,0 +1,183 @@
|
|||
#@TYPE: Machine
|
||||
#@NAME: ccmp13-dvk
|
||||
#@DESCRIPTION: Configuration for Digi ConnectCore MP13 DVK
|
||||
#@NEEDED_BSPLAYERS: layers/meta-digi
|
||||
|
||||
include conf/machine/include/st-machine-common-stm32mp.inc
|
||||
include conf/machine/include/arm/armv7a/tune-cortexa7.inc
|
||||
include conf/machine/include/digi-defaults.inc
|
||||
|
||||
# =========================================================================
|
||||
# Chip architecture
|
||||
# =========================================================================
|
||||
DEFAULTTUNE = "cortexa7thf-neon-vfpv4"
|
||||
MACHINEOVERRIDES = "arm:armv7ve:stcommon:stm32mpcommon:ccmp1:ccmp13:ccmp13-dvk"
|
||||
|
||||
# =========================================================================
|
||||
# boot device
|
||||
# =========================================================================
|
||||
# Configure the list of boards that enable NAND
|
||||
DEVICE_BOARD_ENABLE:NAND += "ccmp13-dvk"
|
||||
|
||||
# =========================================================================
|
||||
# U-Boot configs
|
||||
# =========================================================================
|
||||
# Last one is the default (the one the symlinks point at)
|
||||
UBOOT_CONFIG = "ccmp13_dvk"
|
||||
UBOOT_CONFIG[ccmp13_dvk] = "ccmp13_dvk_defconfig,,u-boot-dtb.${UBOOT_SUFFIX}"
|
||||
|
||||
# Platform U-Boot settings
|
||||
UBOOT_DTB_NAME = "ccmp13-dvk.dtb"
|
||||
UBOOT_PREFIX = "u-boot"
|
||||
UBOOT_SUFFIX = "bin"
|
||||
UBOOT_HAS_FASTBOOT = "false"
|
||||
|
||||
# Set U-Boot FIP settings
|
||||
FIP_UBOOT_DTB = "u-boot"
|
||||
FIP_UBOOT_CONFIG = "optee"
|
||||
|
||||
# =========================================================================
|
||||
# Machine settings
|
||||
# =========================================================================
|
||||
# Define list of devicetree per board
|
||||
STM32MP_DEVICETREE ??= "ccmp13-dvk"
|
||||
# Extra DTB for board - need to specify it with .dtb ...
|
||||
STM32MP_KERNEL_DEVICETREE:ccmp13-dvk += "ccmp133-dvk.dtb"
|
||||
|
||||
# =========================================================================
|
||||
# Machine features
|
||||
# =========================================================================
|
||||
MACHINE_FEATURES += "bluetooth"
|
||||
MACHINE_FEATURES += "wifi"
|
||||
MACHINE_FEATURES += "mca"
|
||||
|
||||
# =========================================================================
|
||||
# Firmware
|
||||
# =========================================================================
|
||||
MACHINE_FIRMWARE:append = " firmware-murata firmware-murata-mfgtest"
|
||||
|
||||
MACHINE_EXTRA_RRECOMMENDS += " \
|
||||
${MACHINE_FIRMWARE} \
|
||||
"
|
||||
|
||||
# =========================================================================
|
||||
# Image
|
||||
# =========================================================================
|
||||
# Image FS types
|
||||
IMAGE_FSTYPES += '${@bb.utils.contains("IMAGE_FEATURES", "read-only-rootfs", \
|
||||
"tar.bz2 boot.ubifs recovery.ubifs squashfs", \
|
||||
"tar.bz2 ubifs boot.ubifs recovery.ubifs", d)}'
|
||||
|
||||
# For populate_sdk, gcc-arm-none-eabi_9 has a python2 dependency, so we remove it.
|
||||
ST_TOOLS_FOR_SDK:remove = "nativesdk-gcc-arm-none-eabi"
|
||||
|
||||
# =========================================================================
|
||||
# flashlayout
|
||||
# =========================================================================
|
||||
# Define the config labels to use to generate flashlayout file
|
||||
|
||||
# =========================================================================
|
||||
# extlinux configuration
|
||||
# =========================================================================
|
||||
# As example, modify the default boot config for each target to M4 config
|
||||
|
||||
# =========================================================================
|
||||
# Debug trace
|
||||
# =========================================================================
|
||||
# activate/deactivate the debug and trace on boot stage
|
||||
ST_DEBUG_TRACE = "0"
|
||||
|
||||
# =========================================================================
|
||||
# trusted-firmware-a
|
||||
# =========================================================================
|
||||
# Configure trusted-firmware-a build
|
||||
TF_A_CONFIG = "optee nand usb"
|
||||
|
||||
# =========================================================================
|
||||
# optee
|
||||
# =========================================================================
|
||||
# Map OPTEE configuration to device tree list
|
||||
OPTEE_CONF = "ccmp13-dvk"
|
||||
|
||||
# =========================================================================
|
||||
# Flashlayouts
|
||||
# =========================================================================
|
||||
|
||||
# =========================================================================
|
||||
# Kernel
|
||||
# =========================================================================
|
||||
KERNEL_IMAGETYPE = "zImage"
|
||||
KERNEL_ALT_IMAGETYPE = "Image uImage vmlinux"
|
||||
KERNEL_DEFCONFIG ?= "ccmp1_defconfig"
|
||||
ST_KERNEL_LOADADDR ?= "0xC0008000"
|
||||
|
||||
# =========================================================================
|
||||
# DEY settings
|
||||
# =========================================================================
|
||||
IMAGE_CLASSES = "image_types_digi image_types-stubi"
|
||||
|
||||
# U-Boot environment offset (within partition)
|
||||
UBOOT_ENV_OFFSET ?= "0x0"
|
||||
# U-Boot environment size
|
||||
UBOOT_ENV_SIZE ?= "0x20000"
|
||||
# U-Boot environment range: size (in hex) in the environment partition that
|
||||
# the U-Boot environment can take up (if undefined, it will take up all the
|
||||
# available space in the environment partition)
|
||||
UBOOT_ENV_RANGE ?= ""
|
||||
|
||||
STORAGE_MEDIA = "mtd"
|
||||
|
||||
# mkfs.ubifs parameters for boot partition (the one holding kernel and device tree files)
|
||||
# Max LEB count (-c 255) calculated for a partition of up to 32 MiB considering 128 KiB erase-block size.
|
||||
MKUBIFS_BOOT_ARGS ?= "-m 2048 -e 126976 -c 255"
|
||||
|
||||
# mkfs.ubifs parameters for rootfs partition
|
||||
# Max LEB count (-c 8191) calculated for a partition of up to 1 GiB considering 128 KiB erase-block size.
|
||||
MKUBIFS_ARGS ?= "-m 2048 -e 126976 -c 8191"
|
||||
|
||||
# Enable STM specific features
|
||||
DEY_BUILD_PLATFORM = "STM"
|
||||
|
||||
# Wireless external module
|
||||
HAS_WIFI_VIRTWLANS = "true"
|
||||
|
||||
# Remove additional bluetooth packages
|
||||
MACHINE_BLUETOOTH_EXTRA_INSTALL = ""
|
||||
|
||||
# =========================================================================
|
||||
# alsa
|
||||
# =========================================================================
|
||||
ALSA_LIST = ""
|
||||
|
||||
# =========================================================================
|
||||
# DISTRO features
|
||||
# =========================================================================
|
||||
DISTRO_FEATURES:remove = " opengl "
|
||||
DISTRO_FEATURES:remove = " x11 "
|
||||
|
||||
# add support of optee
|
||||
DISTRO_FEATURES:append = " optee "
|
||||
|
||||
# add support of splashscreen
|
||||
#DISTRO_FEATURES:append = " splashscreen "
|
||||
|
||||
# add support of systemd
|
||||
DISTRO_FEATURES:append = " systemd "
|
||||
|
||||
# add support of efi
|
||||
DISTRO_FEATURES:append = " efi "
|
||||
|
||||
# add support of InitRD installation package
|
||||
DISTRO_FEATURES:append = " initrd "
|
||||
|
||||
# add support to pulseaudio
|
||||
DISTRO_FEATURES:append = "pulseaudio"
|
||||
|
||||
# Disabling sysvinit
|
||||
DISTRO_FEATURES_BACKFILL_CONSIDERED += "sysvinit"
|
||||
|
||||
VIRTUAL-RUNTIME_init_manager = "systemd"
|
||||
VIRTUAL-RUNTIME_initscripts = "systemd-compat-units"
|
||||
|
||||
# Disable use of vendorfs partition
|
||||
ST_VENDORFS = "0"
|
||||
|
|
@ -13,12 +13,13 @@ PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
|
|||
# -------------------------------------------------
|
||||
# ccimx6 5.4 2017.03
|
||||
# ccimx6qp 5.4 2017.03
|
||||
# ccimx6ul 5.4 2020.04
|
||||
# ccimx6ul 5.15 2020.04
|
||||
# ccimx8x 5.4 2020.04 (packaged in imx-boot)
|
||||
# ccimx8mn 5.4 2020.04 (packaged in imx-boot)
|
||||
# ccimx8mm 5.4 2020.04 (packaged in imx-boot)
|
||||
# ccimx8mp 5.10 2021.04 (packaged in imx-boot)
|
||||
# ccmp15 5.10 2021.04
|
||||
# ccmp15 5.15 2021.10
|
||||
# ccmp13 5.15 2021.10
|
||||
#
|
||||
|
||||
# Help variables used in recipes
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@ AVAILABLE_PLATFORMS=" \
|
|||
ccimx6ulsbc \
|
||||
ccimx6ulstarter \
|
||||
ccmp15-dvk \
|
||||
ccmp13-dvk \
|
||||
"
|
||||
|
||||
MANIFEST_URL="https://github.com/digi-embedded/dey-manifest.git"
|
||||
|
|
@ -150,6 +151,7 @@ done<<-_EOF_
|
|||
ccimx6ulsbc dey-image-qt
|
||||
ccimx6ulstarter core-image-base
|
||||
ccmp15-dvk dey-image-qt
|
||||
ccmp13-dvk core-image-base
|
||||
_EOF_
|
||||
|
||||
YOCTO_IMGS_DIR="${WORKSPACE}/images"
|
||||
|
|
|
|||
|
|
@ -184,6 +184,7 @@ done<<-_EOF_
|
|||
ccimx6ulsom DONTBUILDVARIANTS dey-image-mft-module-min
|
||||
ccimx6ulrftest DONTBUILDVARIANTS dey-image-mft-module-rf
|
||||
ccmp15-dvk DONTBUILDVARIANTS dey-image-qt,dey-image-aws,dey-image-crank
|
||||
ccmp13-dvk DONTBUILDVARIANTS core-image-base
|
||||
_EOF_
|
||||
|
||||
YOCTO_IMGS_DIR="${WORKSPACE}/images"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,23 @@
|
|||
# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
|
||||
# changes incompatibly
|
||||
POKY_BBLAYERS_CONF_VERSION = "2"
|
||||
|
||||
BBPATH = "${TOPDIR}"
|
||||
BBFILES ?= ""
|
||||
|
||||
BBLAYERS ?= " \
|
||||
##OEROOT##/meta \
|
||||
##OEROOT##/meta-poky \
|
||||
##OEROOT##/meta-yocto-bsp \
|
||||
##DIGIBASE##/meta-openembedded/meta-oe \
|
||||
##DIGIBASE##/meta-openembedded/meta-python \
|
||||
##DIGIBASE##/meta-openembedded/meta-networking \
|
||||
##DIGIBASE##/meta-openembedded/meta-webserver \
|
||||
##DIGIBASE##/meta-qt5 \
|
||||
##DIGIBASE##/meta-swupdate \
|
||||
##DIGIBASE##/meta-webkit \
|
||||
##DIGIBASE##/meta-timesys \
|
||||
##DIGIBASE##/meta-st-stm32mp \
|
||||
##DIGIBASE##/meta-digi/meta-digi-arm \
|
||||
##DIGIBASE##/meta-digi/meta-digi-dey \
|
||||
"
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
Digi Embedded Yocto provides the following image recipes:
|
||||
|
||||
* core-image-base: a console-only image
|
||||
|
||||
Expansion of native core-image-base by including all the support for the
|
||||
target device hardware like firmware files, rootfs customizations, etc.
|
||||
|
|
@ -0,0 +1,293 @@
|
|||
#
|
||||
# This file is your local configuration file and is where all local user settings
|
||||
# are placed. The comments in this file give some guide to the options a new user
|
||||
# to the system might want to change but pretty much any configuration option can
|
||||
# be set in this file. More adventurous users can look at
|
||||
# local.conf.sample.extended which contains other examples of configuration which
|
||||
# can be placed in this file but new users likely won't need any of them
|
||||
# initially.
|
||||
#
|
||||
# Lines starting with the '#' character are commented out and in some cases the
|
||||
# default values are provided as comments to show people example syntax. Enabling
|
||||
# the option is a question of removing the # character and making any change to the
|
||||
# variable as required.
|
||||
|
||||
#
|
||||
# Machine Selection
|
||||
#
|
||||
# You need to select a specific machine to target the build with. There are a selection
|
||||
# of emulated machines available which can boot and run in the QEMU emulator:
|
||||
#
|
||||
#MACHINE ?= "qemuarm"
|
||||
#MACHINE ?= "qemuarm64"
|
||||
#MACHINE ?= "qemumips"
|
||||
#MACHINE ?= "qemumips64"
|
||||
#MACHINE ?= "qemuppc"
|
||||
#MACHINE ?= "qemux86"
|
||||
#MACHINE ?= "qemux86-64"
|
||||
#
|
||||
# There are also the following hardware board target machines included for
|
||||
# demonstration purposes:
|
||||
#
|
||||
#MACHINE ?= "beaglebone-yocto"
|
||||
#MACHINE ?= "genericx86"
|
||||
#MACHINE ?= "genericx86-64"
|
||||
#MACHINE ?= "edgerouter"
|
||||
#
|
||||
# This sets the default machine to be qemux86-64 if no other machine is selected:
|
||||
#MACHINE ??= "qemux86-64"
|
||||
|
||||
MACHINE = "ccmp13-dvk"
|
||||
|
||||
#
|
||||
# Use Digi's internal git repositories
|
||||
#
|
||||
#DIGI_INTERNAL_GIT ?= "1"
|
||||
|
||||
#
|
||||
# Where to place downloads
|
||||
#
|
||||
# During a first build the system will download many different source code tarballs
|
||||
# from various upstream projects. This can take a while, particularly if your network
|
||||
# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
|
||||
# can preserve this directory to speed up this part of subsequent builds. This directory
|
||||
# is safe to share between multiple builds on the same machine too.
|
||||
#
|
||||
# The default is a downloads directory under TOPDIR which is the build directory.
|
||||
#
|
||||
#DL_DIR ?= "${TOPDIR}/downloads"
|
||||
|
||||
#
|
||||
# Where to place shared-state files
|
||||
#
|
||||
# BitBake has the capability to accelerate builds based on previously built output.
|
||||
# This is done using "shared state" files which can be thought of as cache objects
|
||||
# and this option determines where those files are placed.
|
||||
#
|
||||
# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
|
||||
# from these files if no changes were made to the configuration. If changes were made
|
||||
# to the configuration, only shared state files where the state was still valid would
|
||||
# be used (done using checksums).
|
||||
#
|
||||
# The default is a sstate-cache directory under TOPDIR.
|
||||
#
|
||||
#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
|
||||
|
||||
#
|
||||
# Where to place the build output
|
||||
#
|
||||
# This option specifies where the bulk of the building work should be done and
|
||||
# where BitBake should place its temporary files and output. Keep in mind that
|
||||
# this includes the extraction and compilation of many applications and the toolchain
|
||||
# which can use Gigabytes of hard disk space.
|
||||
#
|
||||
# The default is a tmp directory under TOPDIR.
|
||||
#
|
||||
#TMPDIR = "${TOPDIR}/tmp"
|
||||
|
||||
#
|
||||
# Default policy config
|
||||
#
|
||||
# The distribution setting controls which policy settings are used as defaults.
|
||||
# The default value is fine for general Yocto project use, at least initially.
|
||||
# Ultimately when creating custom policy, people will likely end up subclassing
|
||||
# these defaults.
|
||||
#
|
||||
DISTRO ?= "dey"
|
||||
# As an example of a subclass there is a "bleeding" edge policy configuration
|
||||
# where many versions are set to the absolute latest code from the upstream
|
||||
# source control systems. This is just mentioned here as an example, its not
|
||||
# useful to most new users.
|
||||
# DISTRO ?= "poky-bleeding"
|
||||
|
||||
#
|
||||
# Package Management configuration
|
||||
#
|
||||
# This variable lists which packaging formats to enable. Multiple package backends
|
||||
# can be enabled at once and the first item listed in the variable will be used
|
||||
# to generate the root filesystems.
|
||||
# Options are:
|
||||
# - 'package_deb' for debian style deb files
|
||||
# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
|
||||
# - 'package_rpm' for rpm style packages
|
||||
# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
|
||||
# We default to rpm:
|
||||
PACKAGE_CLASSES ?= "package_rpm"
|
||||
|
||||
#
|
||||
# SDK target architecture
|
||||
#
|
||||
# This variable specifies the architecture to build SDK items for and means
|
||||
# you can build the SDK packages for architectures other than the machine you are
|
||||
# running the build on (i.e. building i686 packages on an x86_64 host).
|
||||
# Supported values are i686, x86_64, aarch64
|
||||
#SDKMACHINE ?= "i686"
|
||||
|
||||
#
|
||||
# Extra image configuration defaults
|
||||
#
|
||||
# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
|
||||
# images. Some of these options are added to certain image types automatically. The
|
||||
# variable can contain the following options:
|
||||
# "dbg-pkgs" - add -dbg packages for all installed packages
|
||||
# (adds symbol information for debugging/profiling)
|
||||
# "src-pkgs" - add -src packages for all installed packages
|
||||
# (adds source code for debugging)
|
||||
# "dev-pkgs" - add -dev packages for all installed packages
|
||||
# (useful if you want to develop against libs in the image)
|
||||
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
|
||||
# (useful if you want to run the package test suites)
|
||||
# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
|
||||
# "tools-debug" - add debugging tools (gdb, strace)
|
||||
# "eclipse-debug" - add Eclipse remote debugging support
|
||||
# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
|
||||
# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
|
||||
# "debug-tweaks" - make an image suitable for development
|
||||
# e.g. ssh root access has a blank password
|
||||
# There are other application targets that can be used here too, see
|
||||
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
|
||||
# We default to enabling the debugging tweaks.
|
||||
EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
|
||||
|
||||
#
|
||||
# Additional image features
|
||||
#
|
||||
# The following is a list of additional classes to use when building images which
|
||||
# enable extra features. Some available options which can be included in this variable
|
||||
# are:
|
||||
# - 'buildstats' collect build statistics
|
||||
USER_CLASSES ?= "buildstats"
|
||||
|
||||
#
|
||||
# Runtime testing of images
|
||||
#
|
||||
# The build system can test booting virtual machine images under qemu (an emulator)
|
||||
# after any root filesystems are created and run tests against those images. It can also
|
||||
# run tests against any SDK that are built. To enable this uncomment these lines.
|
||||
# See classes/test{image,sdk}.bbclass for further details.
|
||||
#IMAGE_CLASSES += "testimage testsdk"
|
||||
#TESTIMAGE_AUTO:qemuall = "1"
|
||||
|
||||
#
|
||||
# Interactive shell configuration
|
||||
#
|
||||
# Under certain circumstances the system may need input from you and to do this it
|
||||
# can launch an interactive shell. It needs to do this since the build is
|
||||
# multithreaded and needs to be able to handle the case where more than one parallel
|
||||
# process may require the user's attention. The default is iterate over the available
|
||||
# terminal types to find one that works.
|
||||
#
|
||||
# Examples of the occasions this may happen are when resolving patches which cannot
|
||||
# be applied, to use the devshell or the kernel menuconfig
|
||||
#
|
||||
# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
|
||||
# Note: currently, Konsole support only works for KDE 3.x due to the way
|
||||
# newer Konsole versions behave
|
||||
#OE_TERMINAL = "auto"
|
||||
# By default disable interactive patch resolution (tasks will just fail instead):
|
||||
PATCHRESOLVE = "noop"
|
||||
|
||||
#
|
||||
# Disk Space Monitoring during the build
|
||||
#
|
||||
# Monitor the disk space during the build. If there is less that 1GB of space or less
|
||||
# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
|
||||
# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt
|
||||
# of the build. The reason for this is that running completely out of space can corrupt
|
||||
# files and damages the build in ways which may not be easily recoverable.
|
||||
# It's necessary to monitor /tmp, if there is no space left the build will fail
|
||||
# with very exotic errors.
|
||||
BB_DISKMON_DIRS ??= "\
|
||||
STOPTASKS,${TMPDIR},1G,100K \
|
||||
STOPTASKS,${DL_DIR},1G,100K \
|
||||
STOPTASKS,${SSTATE_DIR},1G,100K \
|
||||
STOPTASKS,/tmp,100M,100K \
|
||||
HALT,${TMPDIR},100M,1K \
|
||||
HALT,${DL_DIR},100M,1K \
|
||||
HALT,${SSTATE_DIR},100M,1K \
|
||||
HALT,/tmp,10M,1K"
|
||||
|
||||
#
|
||||
# Shared-state files from other locations
|
||||
#
|
||||
# As mentioned above, shared state files are prebuilt cache data objects which can be
|
||||
# used to accelerate build time. This variable can be used to configure the system
|
||||
# to search other mirror locations for these objects before it builds the data itself.
|
||||
#
|
||||
# This can be a filesystem directory, or a remote url such as https or ftp. These
|
||||
# would contain the sstate-cache results from previous builds (possibly from other
|
||||
# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
|
||||
# cache locations to check for the shared objects.
|
||||
# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
|
||||
# at the end as shown in the examples below. This will be substituted with the
|
||||
# correct path within the directory structure.
|
||||
#SSTATE_MIRRORS ?= "\
|
||||
#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \
|
||||
#file://.* file:///some/local/dir/sstate/PATH"
|
||||
|
||||
#
|
||||
# Yocto Project SState Mirror
|
||||
#
|
||||
# The Yocto Project has prebuilt artefacts available for its releases, you can enable
|
||||
# use of these by uncommenting the following lines. This will mean the build uses
|
||||
# the network to check for artefacts at the start of builds, which does slow it down
|
||||
# equally, it will also speed up the builds by not having to build things if they are
|
||||
# present in the cache. It assumes you can download something faster than you can build it
|
||||
# which will depend on your network.
|
||||
# Note: For this to work you also need hash-equivalence passthrough to the matching server
|
||||
#
|
||||
#BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687"
|
||||
#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH"
|
||||
|
||||
#
|
||||
# Qemu configuration
|
||||
#
|
||||
# By default native qemu will build with a builtin VNC server where graphical output can be
|
||||
# seen. The line below enables the SDL UI frontend too.
|
||||
PACKAGECONFIG:append:pn-qemu-system-native = " sdl"
|
||||
# By default libsdl2-native will be built, if you want to use your host's libSDL instead of
|
||||
# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
|
||||
#ASSUME_PROVIDED += "libsdl2-native"
|
||||
|
||||
# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds
|
||||
# a handy set of menus for controlling the emulator.
|
||||
#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+"
|
||||
|
||||
#
|
||||
# Hash Equivalence
|
||||
#
|
||||
# Enable support for automatically running a local hash equivalence server and
|
||||
# instruct bitbake to use a hash equivalence aware signature generator. Hash
|
||||
# equivalence improves reuse of sstate by detecting when a given sstate
|
||||
# artifact can be reused as equivalent, even if the current task hash doesn't
|
||||
# match the one that generated the artifact.
|
||||
#
|
||||
# A shared hash equivalent server can be set with "<HOSTNAME>:<PORT>" format
|
||||
#
|
||||
#BB_HASHSERVE = "auto"
|
||||
#BB_SIGNATURE_HANDLER = "OEEquivHash"
|
||||
|
||||
#
|
||||
# Memory Resident Bitbake
|
||||
#
|
||||
# Bitbake's server component can stay in memory after the UI for the current command
|
||||
# has completed. This means subsequent commands can run faster since there is no need
|
||||
# for bitbake to reload cache files and so on. Number is in seconds, after which the
|
||||
# server will shut down.
|
||||
#
|
||||
#BB_SERVER_TIMEOUT = "60"
|
||||
|
||||
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
|
||||
# track the version of this file when it was generated. This can safely be ignored if
|
||||
# this doesn't mean anything to you.
|
||||
CONF_VERSION = "2"
|
||||
|
||||
#
|
||||
# Enable local PR server
|
||||
#
|
||||
PRSERV_HOST = "localhost:0"
|
||||
|
||||
#
|
||||
# Some packages are covered by STM EULA
|
||||
#
|
||||
#ACCEPT_EULA_ccmp13-dvk = "1"
|
||||
|
|
@ -94,7 +94,7 @@ do_license() {
|
|||
${MKP_SCRIPTPATH}/sources/meta-digi/meta-digi-arm/DIGI_EULA \
|
||||
${MKP_SCRIPTPATH}/sources/meta-digi/meta-digi-arm/DIGI_OPEN_EULA \
|
||||
"
|
||||
if [ "${MKP_PLATFORM}" = "ccmp15-dvk" ]; then
|
||||
if [ "${MKP_PLATFORM}" = "ccmp15-dvk" ] || [ "${MKP_PLATFORM}" = "ccmp13-dvk" ]; then
|
||||
local SOC_VENDOR="STM"
|
||||
MKP_LICENSE_FILES=" \
|
||||
${MKP_LICENSE_FILES} \
|
||||
|
|
|
|||
Loading…
Reference in New Issue