u-boot-dey: add support for ccimx6qpsbc platform
This commit includes ccimx6qpsbc platform in the recipe and adds U-Boot scripts for deploying and booting the system. https://jira.digi.com/browse/DEL-5082 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit is contained in:
Arturo Buzarra
parent
8e6ce42528
commit
1a3f22c9e4
|
|
@ -0,0 +1,35 @@
|
|||
#
|
||||
# U-Boot bootscript for EMMC/SD images created by Yocto.
|
||||
#
|
||||
|
||||
#
|
||||
# Set device tree filename depending on the board ID (if defined)
|
||||
#
|
||||
if test -n "${board_id}"; then
|
||||
setenv fdt_file uImage-${soc_family}-ccimx6qpsbc-id${board_id}.dtb
|
||||
else
|
||||
#
|
||||
# Set device tree filename depending on the hardware variant
|
||||
#
|
||||
if test "${module_variant}" = "0x01"; then
|
||||
setenv fdt_file uImage-${soc_family}-ccimx6qpsbc-wb.dtb
|
||||
else
|
||||
echo "------ Using default fdt_file"
|
||||
fi
|
||||
fi
|
||||
|
||||
# Get the UUID of the configured boot partition.
|
||||
part uuid mmc ${mmcbootdev}:${mmcpart} bootpart
|
||||
# Check the boot source.
|
||||
if test "${bootpart}" = "${part1_uuid}"; then
|
||||
# We are booting from the eMMC using 'linux'.
|
||||
true
|
||||
elif test "${bootpart}" = "${part2_uuid}"; then
|
||||
# We are booting from the eMMC using 'recovery'.
|
||||
setenv boot_initrd true
|
||||
setenv initrd_file uramdisk-recovery.img
|
||||
else
|
||||
# We are booting from the SD card.
|
||||
setenv mmcroot /dev/mmcblk${mmcbootdev}p2
|
||||
fi
|
||||
dboot linux mmc ${mmcbootdev}:${mmcpart}
|
||||
|
|
@ -0,0 +1,162 @@
|
|||
#
|
||||
# U-Boot script for installing Linux images created by Yocto from the SD
|
||||
# card into the eMMC
|
||||
#
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Determine U-Boot file to program basing on module variant
|
||||
if test -n "${module_variant}"; then
|
||||
if test "${module_variant}" = "0x01"; then
|
||||
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qpsbc2GB.imx;
|
||||
fi
|
||||
fi
|
||||
# Use 'test -n ...' because 'test -z ...' does not work well on old versions of
|
||||
# u-boot when the checked value is empty.
|
||||
if test -n "${INSTALL_UBOOT_FILENAME}"; then
|
||||
true;
|
||||
else
|
||||
echo "";
|
||||
echo "[ERROR] Cannot determine U-Boot file for this module!";
|
||||
echo "";
|
||||
echo "1. Set variable 'INSTALL_UBOOT_FILENAME' depending on your ConnectCore 6 QuadPlus variant:";
|
||||
echo " - For a QuadPlus CPU with 2GB DDR3, run:";
|
||||
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qpsbc2GB.imx";
|
||||
echo "";
|
||||
echo "2. Run the install script again.";
|
||||
echo "";
|
||||
echo "Aborted";
|
||||
echo "";
|
||||
exit;
|
||||
fi;
|
||||
|
||||
setenv INSTALL_MMCDEV 1
|
||||
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6qpsbc.boot.vfat
|
||||
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6qpsbc.recovery.vfat
|
||||
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6qpsbc.ext4
|
||||
|
||||
# Check for presence of firmware files on the SD card
|
||||
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||
if test ! -e mmc ${INSTALL_MMCDEV}:1 ${install_f}; then
|
||||
echo "ERROR: Could not find file ${install_f}";
|
||||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
# Set bootdelay to zero so that firmware update is run immediately after
|
||||
# the first reset.
|
||||
setenv bootdelay 0
|
||||
|
||||
# Set target MMC device index to eMMC
|
||||
setenv mmcdev 0
|
||||
|
||||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot mmc ${INSTALL_MMCDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Set 'bootcmd' to the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Save the environment
|
||||
# - Partition the eMMC user data area for Linux
|
||||
# - Update the 'linux' partition
|
||||
# - Update the 'recovery' partition
|
||||
# - Update the 'rootfs' partition
|
||||
# - Configure recovery to wipe 'update' partition
|
||||
# - Run 'recovery' and let the system boot after
|
||||
setenv bootcmd "
|
||||
env default -a;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Creating Linux partition table on the eMMC\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
run partition_mmc_linux;
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux mmc ${INSTALL_MMCDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery mmc ${INSTALL_MMCDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update recovery partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs mmc ${INSTALL_MMCDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
setenv boot_recovery yes;
|
||||
setenv recovery_command wipe_update;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
sleep 1;
|
||||
reset;
|
||||
"
|
||||
|
||||
saveenv
|
||||
reset
|
||||
Loading…
Reference in New Issue