From 1cb60737490323a1bd716351b5252abbfd8c6085 Mon Sep 17 00:00:00 2001 From: Javier Viguera Date: Fri, 8 Nov 2013 14:21:09 +0100 Subject: [PATCH] meta-digi: remove cpx2 platform This needs to be supported in the DBL layer. Signed-off-by: Javier Viguera --- meta-digi-arm/conf/machine/cpx2.conf | 38 - .../imx-bootlets-dey/imx-bootlets-dey_git.bb | 1 - .../kernel-module-atheros/Makefile | 4 - .../kernel-module-atheros/cpx2/atheros | 86 - .../cpx2/config-wireless-atheros.cfg | 8 - ...-Remove-incorrect-pin-configurations.patch | 37 - ...etup-mmc0-for-the-wireless-interface.patch | 133 -- .../linux/linux-dey-2.6.35.14/cpx2/defconfig | 1598 ----------------- .../linux/linux-dey_2.6.35.14.bb | 5 - .../recipes-kernel/linux/linux-dey_3.10.bb | 1 - .../wpa-supplicant/cpx2/defconfig | 524 ------ .../wpa-supplicant/cpx2/wpa_supplicant.conf | 33 - sdk/build.sh | 2 - sdk/config/cpx2/bblayers.conf.sample | 22 - sdk/config/cpx2/local.conf.sample | 256 --- 15 files changed, 2748 deletions(-) delete mode 100644 meta-digi-arm/conf/machine/cpx2.conf delete mode 100644 meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/cpx2/atheros delete mode 100644 meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/config-wireless-atheros.cfg delete mode 100644 meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/cpx2-Remove-incorrect-pin-configurations.patch delete mode 100644 meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/cpx2e-Setup-mmc0-for-the-wireless-interface.patch delete mode 100644 meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/defconfig delete mode 100644 meta-digi-dey/recipes-connectivity/wpa-supplicant/wpa-supplicant/cpx2/defconfig delete mode 100644 meta-digi-dey/recipes-connectivity/wpa-supplicant/wpa-supplicant/cpx2/wpa_supplicant.conf delete mode 100644 sdk/config/cpx2/bblayers.conf.sample delete mode 100644 sdk/config/cpx2/local.conf.sample diff --git a/meta-digi-arm/conf/machine/cpx2.conf b/meta-digi-arm/conf/machine/cpx2.conf deleted file mode 100644 index ca6e2f4fb..000000000 --- a/meta-digi-arm/conf/machine/cpx2.conf +++ /dev/null @@ -1,38 +0,0 @@ -#@TYPE: Machine -#@NAME: ConnectPort CPX2. -#@DESCRIPTION: Machine configuration for Digi's ConnectPort CPX2. - -include conf/machine/include/mxs-digi-base.inc - -SOC_FAMILY = "mxs:mx28" - -UBOOT_ENTRYPOINT = "0x41008000" -UBOOT_LOADADDRESS = "0x41008000" - -SERIAL_CONSOLE = "115200 ttyAM0" - -# wpa_supplicant driver to use in '/etc/network/interfaces' -WPA_DRIVER = "nl80211" - -# Firmware -MACHINE_FIRMWARE = "firmware-mxs-ar3k" -MACHINE_EXTRA_RRECOMMENDS += "${MACHINE_FIRMWARE}" - -# MACHINE_FEATURES_append = " wifi" - -################################################# -## Flash parameters for JFFS2 and UBIFS images ## -################################################# -# partition size (KiB) -# physical eraseblock size (KiB) -# logical eraseblock size (bytes) -# minimum input/output size (bytes) -# sub-page size (bytes) -# -# PEB, LEB, MIO and SUB might be a list of comma-separated values -# -FLASH_PSZ = "262144" -FLASH_PEB = "128" -FLASH_LEB = "126976" -FLASH_MIO = "2048" -FLASH_SUB = "-" diff --git a/meta-digi-arm/recipes-bsp/imx-bootlets-dey/imx-bootlets-dey_git.bb b/meta-digi-arm/recipes-bsp/imx-bootlets-dey/imx-bootlets-dey_git.bb index 102263739..bd5310c02 100644 --- a/meta-digi-arm/recipes-bsp/imx-bootlets-dey/imx-bootlets-dey_git.bb +++ b/meta-digi-arm/recipes-bsp/imx-bootlets-dey/imx-bootlets-dey_git.bb @@ -22,7 +22,6 @@ PARALLEL_MAKE = "" EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}" EXTRA_OEMAKE_append_ccardimx28js = " BOARD=CCARDIMX28JS" -EXTRA_OEMAKE_append_cpx2 = " BOARD=CPX2" EXTRA_OEMAKE_append_wr21 = " BOARD=WR21" do_install () { diff --git a/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/Makefile b/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/Makefile index 93dfd19b1..f246c6dd8 100644 --- a/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/Makefile +++ b/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/Makefile @@ -36,10 +36,6 @@ FIRMWARE += $(ATH_FIR_BASEDIR)/fw_tablet_dongle/nullTestFlow.bin FIRMWARE += $(ATH_FIR_BASEDIR)/fw_tablet_dongle/utf.bin FIRMWARE += $(ATH_FIR_BASEDIR)/Digi_6203-6233-US.bin FIRMWARE += $(ATH_FIR_BASEDIR)/Digi_6203-6233-World.bin -ifeq ("$(DEL_PLATFORM)","cpx2") -FIRMWARE += $(ATH_FIR_BASEDIR)/calData_AR6103_Digi_X2e_B.bin -FIRMWARE += $(ATH_FIR_BASEDIR)/calData_AR6103_Digi_X2e_B_world.bin -endif SRC := $(shell pwd) diff --git a/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/cpx2/atheros b/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/cpx2/atheros deleted file mode 100644 index 8a7cafa19..000000000 --- a/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/cpx2/atheros +++ /dev/null @@ -1,86 +0,0 @@ -#!/bin/sh -#=============================================================================== -# -# 10-atheros_pre-up -# -# Copyright (C) 2012 by Digi International Inc. -# All rights reserved. -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published by -# the Free Software Foundation. -# -# -# !Description: Load Atheros' wireless driver -# -#=============================================================================== - -set -e - -[ "${IFACE}" != "wlan0" ] && exit 0 - -FIRMWARE_DIR="/lib/firmware/ath6k/AR6003/hw2.1.1" -RAM_DRIVE="/var/run" -MAC_FILENAME="softmac" - -# -# Get the wlan MAC address from kernel command line. Use a default -# value if the address has not been set. -# -MAC_ADDR="$(sed -ne 's,.\+ethaddr2=\([^[:blank:]]\+\)[[:blank:]].*,\1,g;T;p' /proc/cmdline)" -if [ -z "${MAC_ADDR}" -o "${MAC_ADDR}" = "00:00:00:00:00:00" ]; then - MAC_ADDR="00:04:F3:4C:B1:D3" -fi - -mac1="$(echo ${MAC_ADDR} | cut -d':' -f1)" -mac2="$(echo ${MAC_ADDR} | cut -d':' -f2)" -mac3="$(echo ${MAC_ADDR} | cut -d':' -f3)" -mac4="$(echo ${MAC_ADDR} | cut -d':' -f4)" -mac5="$(echo ${MAC_ADDR} | cut -d':' -f5)" -mac6="$(echo ${MAC_ADDR} | cut -d':' -f6)" - -printf "\x${mac1}\x${mac2}\x${mac3}\x${mac4}\x${mac5}\x${mac6}" > ${RAM_DRIVE}/${MAC_FILENAME} - -# We need to write the WLAN MAC address to softmac in the ath6k firmware -# directory. However, we don't want to rewrite the file if it already exists -# and the address is the same because we don't want to wear out NAND flash. -# -# So create the file on the RAM DRIVE first and compare the two. Only update -# the copy on NAND if the address has changed. -# -if ! cmp -s ${RAM_DRIVE}/${MAC_FILENAME} ${FIRMWARE_DIR}/${MAC_FILENAME}; then - cp ${RAM_DRIVE}/${MAC_FILENAME} ${FIRMWARE_DIR}/${MAC_FILENAME} -fi -rm -f ${RAM_DRIVE}/${MAC_FILENAME} - -BDATA_SOURCE="calData_AR6103_Digi_X2e_B_world.bin" -if [ -e "/sys/kernel/machine/name" ]; then - # Figure out which wireless region we are in. The US has rules for - # what channels can be used and at what power level. We use a different set of - # rules for the other regions in the world that we sell into. The mod_cert field - # in OTP will be set to 0x0 for the US. Once we know the region, make sure the - # appropriate calibration file is loaded. - # - US_CODE="0x0" - MACHINE="$(cat /sys/kernel/machine/name)" - REGION_CODE="$(cat /sys/kernel/${MACHINE}/mod_cert)" - if [ -z "${REGION_CODE}" -o "${US_CODE}" = "${REGION_CODE}" ]; then - BDATA_SOURCE="calData_AR6103_Digi_X2e_B.bin" - fi -else - logger -t atheros "Undefined machine, defaulting to world region." -fi - -# We don't want to rewrite NAND every time we boot so only -# change the link if it is wrong. -BDATA_LINK="${FIRMWARE_DIR}/bdata.bin" -if [ ! -e "${BDATA_LINK}" ] || ! cmp -s "${BDATA_LINK}" "${FIRMWARE_DIR}/${BDATA_SOURCE}"; then - ln -sf "${BDATA_SOURCE}" "${BDATA_LINK}" -fi - -# ath6kl_sdio.ko -grep -qs ath6kl_sdio /proc/modules || \ - modprobe --ignore-install -q ath6kl_sdio || echo "Loading ath6kl_sdio module: [FAILED]" - -# Delay required for the interface 'wlan0' to settle down before trying to configure it. -sleep 0.5 diff --git a/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/config-wireless-atheros.cfg b/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/config-wireless-atheros.cfg deleted file mode 100644 index 87bc0b4cb..000000000 --- a/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/config-wireless-atheros.cfg +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_WLAN=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_RFKILL=y -CONFIG_RFKILL_INPUT=y - diff --git a/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/cpx2-Remove-incorrect-pin-configurations.patch b/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/cpx2-Remove-incorrect-pin-configurations.patch deleted file mode 100644 index 01e5384bc..000000000 --- a/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/cpx2-Remove-incorrect-pin-configurations.patch +++ /dev/null @@ -1,37 +0,0 @@ -From a4ad7a68fa1d203314b71436b5911f2189aafb91 Mon Sep 17 00:00:00 2001 -From: Alex Gonzalez -Date: Thu, 16 May 2013 10:30:20 +0200 -Subject: [PATCH 1/2] cpx2: Remove incorrect pin configurations. - -The CPX2e does not use the PINID_SAIF0_LRCLK pin to power up the wifi. - -Signed-off-by: Alex Gonzalez ---- - arch/arm/mach-mx28/mx28_cpx2_pins.c | 14 -------------- - 1 file changed, 14 deletions(-) - -diff --git a/arch/arm/mach-mx28/mx28_cpx2_pins.c b/arch/arm/mach-mx28/mx28_cpx2_pins.c -index e7d6507..07c65bf 100755 ---- a/arch/arm/mach-mx28/mx28_cpx2_pins.c -+++ b/arch/arm/mach-mx28/mx28_cpx2_pins.c -@@ -51,20 +51,6 @@ static struct pin_desc mx28_cpx2_fixed_pins[] = { - .id = PINID_PWM1, - .fun = PIN_GPIO, - }, --#ifdef CONFIG_WLAN -- { -- .name = "ATHEROS_PWR", -- .id = PINID_SAIF0_LRCLK, -- .fun = PIN_GPIO, -- .strength = PAD_4MA, -- .voltage = PAD_3_3V, -- .pullup = 0, -- .drive = 1, -- .pull = 0, -- .output = 1, -- .data = 1, -- }, --#endif - #ifdef CONFIG_MXS_AUART0_DEVICE_ENABLE - { - .name = "AUART0.RX", diff --git a/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/cpx2e-Setup-mmc0-for-the-wireless-interface.patch b/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/cpx2e-Setup-mmc0-for-the-wireless-interface.patch deleted file mode 100644 index 85e6c5690..000000000 --- a/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/cpx2e-Setup-mmc0-for-the-wireless-interface.patch +++ /dev/null @@ -1,133 +0,0 @@ -From 4b17f5ce43df8b18c977386081d57929470e6bba Mon Sep 17 00:00:00 2001 -From: Alex Gonzalez -Date: Thu, 16 May 2013 10:31:24 +0200 -Subject: [PATCH 2/2] cpx2e: Setup mmc0 for the wireless interface. - -The Atheros wireless chip is connected via SDIO to mmc0. This commits -sets up the interface ready to be used. - -Signed-off-by: Alex Gonzalez ---- - arch/arm/mach-mx28/device.c | 102 ++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 101 insertions(+), 1 deletion(-) - -diff --git a/arch/arm/mach-mx28/device.c b/arch/arm/mach-mx28/device.c -index ca0739c..1475b28 100755 ---- a/arch/arm/mach-mx28/device.c -+++ b/arch/arm/mach-mx28/device.c -@@ -398,7 +398,7 @@ static void mx28_init_gpmi_nfc(void) - #endif - - #if defined(CONFIG_MMC_MXS) || defined(CONFIG_MMC_MXS_MODULE) --#if defined(CONFIG_MACH_MX28EVK) || defined (CONFIG_MACH_CPX2) || defined (CONFIG_MACH_WR21) -+#if defined(CONFIG_MACH_MX28EVK) || defined (CONFIG_MACH_WR21) - #define MMC0_POWER MXS_PIN_TO_GPIO(PINID_PWM3) - #define MMC1_POWER MXS_PIN_TO_GPIO(PINID_PWM4) - #define MMC0_WP MXS_PIN_TO_GPIO(PINID_SSP1_SCK) -@@ -629,6 +629,106 @@ static void __init mx28_init_mmc(void) - mxs_add_device(pdev, 2); - } - } -+#elif defined (CONFIG_MACH_CPX2) -+#define MMC0_POWER MXS_PIN_TO_GPIO(PINID_AUART1_TX) -+ -+static int mxs_mmc_hw_init_ssp0(void) -+{ -+ int ret = 0; -+ -+ /* Configure POWER pin as gpio to drive power to MMC slot */ -+ ret = gpio_request(MMC0_POWER, "mmc0_power"); -+ if (ret) -+ goto out_power; -+ -+ gpio_direction_output(MMC0_POWER, 1); -+ mdelay(100); -+ -+ return 0; -+ -+out_power: -+ return ret; -+} -+ -+static void mxs_mmc_hw_release_ssp0(void) -+{ -+ gpio_free(MMC0_POWER); -+} -+ -+static void mxs_mmc_cmd_pullup_ssp0(int enable) -+{ -+ mxs_set_pullup(PINID_SSP0_CMD, enable, 0 /* sysfs */, "mmc0_cmd"); -+} -+ -+static unsigned long mxs_mmc_setclock_ssp0(unsigned long hz) -+{ -+ struct clk *ssp = clk_get(NULL, "ssp.0"), *parent; -+ if (hz > 1000000) -+ parent = clk_get(NULL, "ref_io.0"); -+ else -+ parent = clk_get(NULL, "xtal.0"); -+ -+ clk_set_parent(ssp, parent); -+ clk_set_rate(ssp, 2 * hz); -+ clk_put(parent); -+ clk_put(ssp); -+ -+ return hz; -+} -+ -+static struct mxs_mmc_platform_data mmc0_data = { -+ .hw_init = mxs_mmc_hw_init_ssp0, -+ .hw_release = mxs_mmc_hw_release_ssp0, -+ .get_wp = NULL, -+ .cmd_pullup = mxs_mmc_cmd_pullup_ssp0, -+ .setclock = mxs_mmc_setclock_ssp0, -+ .caps = MMC_CAP_4_BIT_DATA -+ | MMC_CAP_DATA_DDR, -+ .min_clk = 400000, -+ .max_clk = 48000000, -+ .read_uA = 50000, -+ .write_uA = 70000, -+ .clock_mmc = "ssp.0", -+ .power_mmc = NULL, -+}; -+ -+static struct resource mmc0_resource[] = { -+ { -+ .flags = IORESOURCE_MEM, -+ .start = SSP0_PHYS_ADDR, -+ .end = SSP0_PHYS_ADDR + 0x2000 - 1, -+ }, -+ { -+ .flags = IORESOURCE_DMA, -+ .start = MXS_DMA_CHANNEL_AHB_APBH_SSP0, -+ .end = MXS_DMA_CHANNEL_AHB_APBH_SSP0, -+ }, -+ { -+ .flags = IORESOURCE_IRQ, -+ .start = IRQ_SSP0_DMA, -+ .end = IRQ_SSP0_DMA, -+ }, -+ { -+ .flags = IORESOURCE_IRQ, -+ .start = IRQ_SSP0, -+ .end = IRQ_SSP0, -+ }, -+}; -+ -+static void __init mx28_init_mmc(void) -+{ -+ struct platform_device *pdev; -+ -+ if (mxs_get_type(PINID_SSP0_CMD) == PIN_FUN1) { -+ pdev = mxs_get_device("mxs-mmc", 0); -+ if (pdev == NULL || IS_ERR(pdev)) -+ return; -+ pdev->resource = mmc0_resource; -+ pdev->num_resources = ARRAY_SIZE(mmc0_resource); -+ pdev->dev.platform_data = &mmc0_data; -+ mxs_add_device(pdev, 0); -+ } -+} - #elif defined(CONFIG_MACH_CCARDIMX28JS) - #define MMC2_POWER MXS_PIN_TO_GPIO(PINID_SSP2_MISO) - #define MMC2_WP /* This is the Wi-Fi interface so there is no write protect*/ diff --git a/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/defconfig b/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/defconfig deleted file mode 100644 index 47a48e356..000000000 --- a/meta-digi-arm/recipes-kernel/linux/linux-dey-2.6.35.14/cpx2/defconfig +++ /dev/null @@ -1,1598 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.35.14 -# Wed May 30 12:30:31 2012 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -# CONFIG_ARCH_USES_GETTIMEOFFSET is not set -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_ARCH_HAS_CPUFREQ=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_FIQ=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -CONFIG_CONSTRUCTORS=y - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_CROSS_COMPILE="" -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_LZO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -# CONFIG_TREE_RCU is not set -# CONFIG_TREE_PREEMPT_RCU is not set -CONFIG_TINY_RCU=y -# CONFIG_TREE_RCU_TRACE is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_LZMA is not set -# CONFIG_RD_LZO is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y - -# -# Kernel Performance Events And Counters -# -# CONFIG_PERF_EVENTS is not set -# CONFIG_PERF_COUNTERS is not set -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_CLK=y - -# -# GCOV-based kernel profiling -# -# CONFIG_SLOW_WORK is not set -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBDAF=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -# CONFIG_INLINE_SPIN_TRYLOCK is not set -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK is not set -# CONFIG_INLINE_SPIN_LOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set -CONFIG_INLINE_SPIN_UNLOCK=y -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_READ_TRYLOCK is not set -# CONFIG_INLINE_READ_LOCK is not set -# CONFIG_INLINE_READ_LOCK_BH is not set -# CONFIG_INLINE_READ_LOCK_IRQ is not set -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set -CONFIG_INLINE_READ_UNLOCK=y -# CONFIG_INLINE_READ_UNLOCK_BH is not set -CONFIG_INLINE_READ_UNLOCK_IRQ=y -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_WRITE_TRYLOCK is not set -# CONFIG_INLINE_WRITE_LOCK is not set -# CONFIG_INLINE_WRITE_LOCK_BH is not set -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set -CONFIG_INLINE_WRITE_UNLOCK=y -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set -# CONFIG_MUTEX_SPIN_ON_OWNER is not set -CONFIG_FREEZER=y - -# -# System Type -# -CONFIG_MMU=y -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_VEXPRESS is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CNS3XXX is not set -# CONFIG_ARCH_GEMINI is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_STMP3XXX is not set -CONFIG_ARCH_MXS=y -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_NUC93X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_SHMOBILE is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_S5P6440 is not set -# CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC100 is not set -# CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_U300 is not set -# CONFIG_ARCH_U8500 is not set -# CONFIG_ARCH_NOMADIK is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_PLAT_SPEAR is not set -CONFIG_IRAM_ALLOC=y -CONFIG_DMA_ZONE_SIZE=32 - -# -# Freescale i.MXS implementations -# -CONFIG_ARCH_MX28=y -# CONFIG_ARCH_MX23 is not set -# CONFIG_MACH_MX28EVK is not set -CONFIG_MACH_CPX2=y -CONFIG_MTD_DIGI_REMOVE_DEFAULT_FREESCALE_PARTITION=y -CONFIG_NO_OTP_MAC_ADDRESS=y -CONFIG_VECTORS_PHY_ADDR=0 -CONFIG_MXS_TIMER_WITH_MACH=y -# CONFIG_MXS_RAM_FREQ_SCALING is not set -# CONFIG_MEM_mDDR is not set -CONFIG_DMA_ZONE=y -CONFIG_MXS_CONSISTENT_DMA_SIZE=32 -CONFIG_MXS_ICOLL=y -CONFIG_MXS_EARLY_CONSOLE=y -CONFIG_MXS_DMA_ENGINE=y -CONFIG_MXS_LRADC=y -CONFIG_MXS_PWM_CHANNELS=8 - -# -# Freescale Application UART -# -CONFIG_MXS_AUART_DMA_SUPPORT=y -CONFIG_MXS_AUART_PORTS=5 -# CONFIG_MXS_AUART1_DEVICE_ENABLE is not set -# CONFIG_MXS_AUART1_2WIRE is not set -# CONFIG_MXS_AUART1_4WIRE is not set -CONFIG_MXS_AUART2_DEVICE_ENABLE=y -CONFIG_MXS_AUART2_2WIRE=y -# CONFIG_MXS_AUART2_4WIRE is not set -# CONFIG_MXS_AUART2_DMA_ENABLE is not set -# CONFIG_MXS_AUART3_DEVICE_ENABLE is not set -# CONFIG_MXS_AUART4_DEVICE_ENABLE is not set - -# -# Processor Type -# -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_LEGACY=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -CONFIG_ARM_L1_CACHE_SHIFT=5 -CONFIG_COMMON_CLKDEV=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_HIGHMEM is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=999999 -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -# CONFIG_KSM is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_UACCESS_WITH_MEMCPY is not set - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# CPU Power Management -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -# CONFIG_CPU_IDLE is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_HAVE_AOUT=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_NVS=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_APM_EMULATION is not set -CONFIG_PM_RUNTIME=y -CONFIG_PM_OPS=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DELAY is not set -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_RDS is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_L2TP is not set -CONFIG_STP=y -CONFIG_BRIDGE=y -CONFIG_BRIDGE_IGMP_SNOOPING=y -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_PHONET is not set -# CONFIG_IEEE802154 is not set -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -# CONFIG_NET_SCH_CBQ is not set -# CONFIG_NET_SCH_HTB is not set -# CONFIG_NET_SCH_HFSC is not set -# CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_MULTIQ is not set -# CONFIG_NET_SCH_RED is not set -# CONFIG_NET_SCH_SFQ is not set -# CONFIG_NET_SCH_TEQL is not set -# CONFIG_NET_SCH_TBF is not set -# CONFIG_NET_SCH_GRED is not set -# CONFIG_NET_SCH_DSMARK is not set -# CONFIG_NET_SCH_NETEM is not set -# CONFIG_NET_SCH_DRR is not set - -# -# Classification -# -# CONFIG_NET_CLS_BASIC is not set -# CONFIG_NET_CLS_TCINDEX is not set -# CONFIG_NET_CLS_ROUTE4 is not set -# CONFIG_NET_CLS_FW is not set -# CONFIG_NET_CLS_U32 is not set -# CONFIG_NET_CLS_RSVP is not set -# CONFIG_NET_CLS_RSVP6 is not set -# CONFIG_NET_CLS_FLOW is not set -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set -# CONFIG_CAIF is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_TESTS is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_SM_FTL is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_MXC_DATAFLASH is not set -# CONFIG_MTD_MXC_M25P80 is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SST25L is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND_ECC=y -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_SM_COMMON is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 -# CONFIG_MTD_NAND_GPIO is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_GPMI_NFC=y -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_RESERVE=1 -# CONFIG_MTD_UBI_GLUEBI is not set - -# -# UBI debugging options -# -# CONFIG_MTD_UBI_DEBUG is not set -# CONFIG_MTD_UBI_BLOCK is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set - -# -# DRBD disabled because PROC_FS, INET or CONNECTOR not selected -# -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=4 -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MG_DISK is not set -CONFIG_MISC_DEVICES=y -# CONFIG_AD525X_DPOT is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_ISL29003 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_DS1682 is not set -# CONFIG_TI_DAC7512 is not set -CONFIG_MXS_PERSISTENT=y -CONFIG_MXS_PERFMON=y -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_AT25 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_MAX6875 is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_IWMC3200TOP is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -CONFIG_MICREL_PHY=y -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_ENC28J60 is not set -# CONFIG_ETHOC is not set -# CONFIG_SMC911X is not set -# CONFIG_SMSC911X is not set -# CONFIG_DNET is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set -# CONFIG_KS8842 is not set -# CONFIG_KS8851 is not set -# CONFIG_KS8851_MLL is not set -CONFIG_FEC=y -# CONFIG_FEC2 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_HSO is not set -# CONFIG_USB_IPHETH is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set -# CONFIG_INPUT_SPARSEKMAP is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_N_GSM is not set -CONFIG_MXS_VIIM=y - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_MXS_DUART=y -CONFIG_SERIAL_MXS_AUART=y -CONFIG_SERIAL_MXS_AUART_CONSOLE=y -CONFIG_SERIAL_MXS_DUART_CONSOLE=y -# CONFIG_SERIAL_MAX3100 is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_TIMBERDALE is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_FSL_OTP is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_RAMOOPS is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set - -# -# PPS support -# -# CONFIG_PPS is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y - -# -# Memory mapped GPIO expanders: -# -# CONFIG_GPIO_IT8761E is not set - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set -# CONFIG_GPIO_ADP5588 is not set - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_GPIO_MC33880 is not set - -# -# AC97 GPIO expanders: -# - -# -# MODULbus GPIO expanders: -# -# CONFIG_GENERIC_PWM is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_MXS_WATCHDOG=y -# CONFIG_MAX63XX_WATCHDOG is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_DUMMY is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set -CONFIG_REGULATOR_MXS=y -# CONFIG_MEDIA_SUPPORT is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_FB_MXS_TVENC is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -# CONFIG_HID_3M_PCT is not set -# CONFIG_HID_A4TECH is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_CANDO is not set -# CONFIG_HID_CHERRY is not set -# CONFIG_HID_CHICONY is not set -# CONFIG_HID_CYPRESS is not set -# CONFIG_HID_DRAGONRISE is not set -# CONFIG_HID_EGALAX is not set -# CONFIG_HID_EZKEY is not set -# CONFIG_HID_KYE is not set -# CONFIG_HID_GYRATION is not set -# CONFIG_HID_TWINHAN is not set -# CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MAGICMOUSE is not set -# CONFIG_HID_MICROSOFT is not set -# CONFIG_HID_MOSART is not set -# CONFIG_HID_MONTEREY is not set -# CONFIG_HID_NTRIG is not set -# CONFIG_HID_ORTEK is not set -# CONFIG_HID_PANTHERLORD is not set -# CONFIG_HID_PETALYNX is not set -# CONFIG_HID_PICOLCD is not set -# CONFIG_HID_QUANTA is not set -# CONFIG_HID_ROCCAT is not set -# CONFIG_HID_ROCCAT_KONE is not set -# CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set -# CONFIG_HID_STANTUM is not set -# CONFIG_HID_SUNPLUS is not set -# CONFIG_HID_GREENASIA is not set -# CONFIG_HID_SMARTJOYPLUS is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_HID_THRUSTMASTER is not set -# CONFIG_HID_WACOM is not set -# CONFIG_HID_ZEROPLUS is not set -# CONFIG_HID_ZYDACRON is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y -CONFIG_USB_OTG=y -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ARC=y -CONFIG_USB_EHCI_ARC_H1=y -CONFIG_USB_EHCI_ARC_OTG=y -# CONFIG_USB_STATIC_IRAM is not set -# CONFIG_USB_EHCI_FSL_MC13783 is not set -# CONFIG_USB_EHCI_FSL_1301 is not set -# CONFIG_USB_EHCI_FSL_1504 is not set -CONFIG_USB_EHCI_FSL_UTMI=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_USBAT=y -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_R8A66597 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C_HSOTG is not set -# CONFIG_USB_GADGET_IMX is not set -# CONFIG_USB_GADGET_S3C2443 is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_QE is not set -# CONFIG_USB_GADGET_CI13XXX is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_GOKU is not set -CONFIG_USB_GADGET_ARC=y -CONFIG_USB_ARC=y -CONFIG_WORKAROUND_ARCUSB_REG_RW=y -# CONFIG_USB_GADGET_LANGWELL is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_ETH_EEM is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FUNCTIONFS is not set -CONFIG_USB_FILE_STORAGE=m -# CONFIG_FSL_UTP is not set -# CONFIG_USB_FILE_STORAGE_TEST is not set -# CONFIG_USB_MASS_STORAGE is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_G_NOKIA is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_WEBCAM is not set - -# -# OTG and related infrastructure -# -CONFIG_USB_OTG_UTILS=y -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_ULPI is not set -# CONFIG_NOP_USB_XCEIV is not set -CONFIG_MXC_OTG=y -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD/SDIO Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_SPI is not set -# CONFIG_MMC_IMX_ESDHCI_PIO_MODE is not set -CONFIG_MMC_MXS=y -CONFIG_MMC_MXS_SSP0_ENABLE=y -# CONFIG_MMC_MXS_SSP0_1_DATA_BITS is not set -CONFIG_MMC_MXS_SSP0_4_DATA_BITS=y -CONFIG_MMC_MXS_SSP0_DATA_BITS=4 -CONFIG_MMC_MXS_SSP2_ENABLE=y -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_BQ32K is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_RX8025 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_DS3234 is not set -# CONFIG_RTC_DRV_PCF2123 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_MXS=y -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -# CONFIG_NILFS2_FS is not set -CONFIG_FILE_LOCKING=y -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -# CONFIG_INOTIFY is not set -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_XATTR is not set -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -# CONFIG_UBIFS_FS_DEBUG is not set -# CONFIG_LOGFS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CEPH_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=y -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y -# CONFIG_LATENCYTOP is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_TRACING_SUPPORT=y -# CONFIG_FTRACE is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_TMPFSDEV is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_ARM_UNWIND is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_OC_ETM is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_SMACK is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" -CONFIG_CRYPTO=y - -# -# OCF Configuration -# -# CONFIG_OCF_OCF is not set - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_PCOMP=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_WORKQUEUE=y -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set -CONFIG_CRYPTO_CRYPTODEV=y - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_VMAC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_ZLIB is not set -CONFIG_CRYPTO_LZO=y - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_BINARY_PRINTF is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=y -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_NLATTR=y -CONFIG_GENERIC_ATOMIC64=y diff --git a/meta-digi-arm/recipes-kernel/linux/linux-dey_2.6.35.14.bb b/meta-digi-arm/recipes-kernel/linux/linux-dey_2.6.35.14.bb index c0481a6f4..378143b94 100644 --- a/meta-digi-arm/recipes-kernel/linux/linux-dey_2.6.35.14.bb +++ b/meta-digi-arm/recipes-kernel/linux/linux-dey_2.6.35.14.bb @@ -7,16 +7,11 @@ PR = "${DISTRO}.${INC_PR}.0" LOCALVERSION_mx5 = "mx5" LOCALVERSION_mxs = "mxs" -LOCALVERSION_cpx2_mxs = "mxs+gateways" SRC_URI += " \ file://defconfig \ ${KERNEL_CFG_FRAGS} \ " -SRC_URI_append_cpx2 = " \ - file://cpx2-Remove-incorrect-pin-configurations.patch \ - file://cpx2e-Setup-mmc0-for-the-wireless-interface.patch \ -" S = "${WORKDIR}/git" KERNEL_CFG_FRAGS ?= "" diff --git a/meta-digi-arm/recipes-kernel/linux/linux-dey_3.10.bb b/meta-digi-arm/recipes-kernel/linux/linux-dey_3.10.bb index 515d74b19..bf186ca15 100644 --- a/meta-digi-arm/recipes-kernel/linux/linux-dey_3.10.bb +++ b/meta-digi-arm/recipes-kernel/linux/linux-dey_3.10.bb @@ -10,7 +10,6 @@ include linux-dey-rev_${PV}.inc PR = "${DISTRO}.${INC_PR}.0" LOCALVERSION_mxs = "mxs" -LOCALVERSION_cpx2_mxs = "mxs+gateways" # Kernel configuration fragments KERNEL_CFG_FRAGS ?= "" diff --git a/meta-digi-dey/recipes-connectivity/wpa-supplicant/wpa-supplicant/cpx2/defconfig b/meta-digi-dey/recipes-connectivity/wpa-supplicant/wpa-supplicant/cpx2/defconfig deleted file mode 100644 index 0558bb1bc..000000000 --- a/meta-digi-dey/recipes-connectivity/wpa-supplicant/wpa-supplicant/cpx2/defconfig +++ /dev/null @@ -1,524 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -#CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -#CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -# Note: WEXT is deprecated in the current Linux kernel version and no new -# functionality is added to it. nl80211-based interface is the new -# replacement for WEXT and its use allows wpa_supplicant to properly control -# the driver to improve existing functionality like roaming and to support new -# functionality. -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_LIBNL32=y -CONFIG_DRIVER_NL80211=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Solaris libraries -#LIBS += -lsocket -ldlpi -lnsl -#LIBS_c += -lsocket - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -CONFIG_EAP_PSK=y - -# EAP-pwd (secure authentication using only a password) -#CONFIG_EAP_PWD=y - -# EAP-PAX -CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -CONFIG_EAP_SAKE=y - -# EAP-GPSK -CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -CONFIG_WPS=y -# Enable WSC 2.0 support -CONFIG_WPS2=y -# Enable WPS external registrar functionality -#CONFIG_WPS_ER=y -# Disable credentials for an open network by default when acting as a WPS -# registrar. -#CONFIG_WPS_REG_DISABLE_OPEN=y -# Enable WPS support with NFC config method -#CONFIG_WPS_NFC=y - -# EAP-IKEv2 -CONFIG_EAP_IKEV2=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) -CONFIG_HT_OVERRIDES=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# udp-remote = UDP sockets with remote access (only for tests systems/purpose) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=unix - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Include internal line edit mode in wpa_cli. This can be used as a replacement -# for GNU Readline to provide limited command line editing and history support. -CONFIG_WPA_CLI_EDIT=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template -#CONFIG_ELOOP=eloop - -# Should we use poll instead of select? Select is used by default. -#CONFIG_ELOOP_POLL=y - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection), also known as PMF -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -#CONFIG_TLS=openssl - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) -# can be enabled to get a stronger construction of messages when block ciphers -# are used. It should be noted that some existing TLS v1.0 -based -# implementation may not be compatible with TLS v1.1 message (ClientHello is -# sent prior to negotiating which version will be used) -#CONFIG_TLSV11=y - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) -# can be enabled to enable use of stronger crypto algorithms. It should be -# noted that some existing TLS v1.0 -based implementation may not be compatible -# with TLS v1.2 message (ClientHello is sent prior to negotiating which version -# will be used) -#CONFIG_TLSV12=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -#CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -#CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -#CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -#CONFIG_DEBUG_FILE=y - -# Send debug messages to syslog instead of stdout -#CONFIG_DEBUG_SYSLOG=y -# Set syslog facility for debug messages -#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON - -# Add support for sending all debug messages (regardless of debug verbosity) -# to the Linux kernel tracing facility. This helps debug the entire stack by -# making it easy to record everything happening from the driver up into the -# same file, e.g., using trace-cmd. -#CONFIG_DEBUG_LINUX_TRACING=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, uncomment these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, uncomment these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -# wpa_supplicant depends on strong random number generation being available -# from the operating system. os_get_random() function is used to fetch random -# data when needed, e.g., for key generation. On Linux and BSD systems, this -# works by reading /dev/urandom. It should be noted that the OS entropy pool -# needs to be properly initialized before wpa_supplicant is started. This is -# important especially on embedded devices that do not have a hardware random -# number generator and may by default start up with minimal entropy available -# for random number generation. -# -# As a safety net, wpa_supplicant is by default trying to internally collect -# additional entropy for generating random data to mix in with the data fetched -# from the OS. This by itself is not considered to be very strong, but it may -# help in cases where the system pool is not initialized properly. However, it -# is very strongly recommended that the system pool is initialized with enough -# entropy either by using hardware assisted random number generator or by -# storing state over device reboots. -# -# wpa_supplicant can be configured to maintain its own entropy store over -# restarts to enhance random number generation. This is not perfect, but it is -# much more secure than using the same sequence of random numbers after every -# reboot. This can be enabled with -e command line option. The -# specified file needs to be readable and writable by wpa_supplicant. -# -# If the os_get_random() is known to provide strong random data (e.g., on -# Linux/BSD, the board in question is known to have reliable source of random -# data from /dev/urandom), the internal wpa_supplicant random pool can be -# disabled. This will save some in binary size and CPU use. However, this -# should only be considered for builds that are known to be used on devices -# that meet the requirements described above. -CONFIG_NO_RANDOM_POOL=y - -# IEEE 802.11n (High Throughput) support (mainly for AP mode) -CONFIG_IEEE80211N=y - -# Wireless Network Management (IEEE Std 802.11v-2011) -# Note: This is experimental and not complete implementation. -#CONFIG_WNM=y - -# Interworking (IEEE 802.11u) -# This can be used to enable functionality to improve interworking with -# external networks (GAS/ANQP to learn more about the networks and network -# selection based on available credentials). -#CONFIG_INTERWORKING=y - -# Hotspot 2.0 -#CONFIG_HS20=y - -# AP mode operations with wpa_supplicant -# This can be used for controlling AP mode operations with wpa_supplicant. It -# should be noted that this is mainly aimed at simple cases like -# WPA2-Personal while more complex configurations like WPA2-Enterprise with an -# external RADIUS server can be supported with hostapd. -CONFIG_AP=y - -# P2P (Wi-Fi Direct) -# This can be used to enable P2P support in wpa_supplicant. See README-P2P for -# more information on P2P operations. -CONFIG_P2P=y - -# Autoscan -# This can be used to enable automatic scan support in wpa_supplicant. -# See wpa_supplicant.conf for more information on autoscan usage. -# -# Enabling directly a module will enable autoscan support. -# For exponential module: -#CONFIG_AUTOSCAN_EXPONENTIAL=y -# For periodic module: -#CONFIG_AUTOSCAN_PERIODIC=y - -# Password (and passphrase, etc.) backend for external storage -# These optional mechanisms can be used to add support for storing passwords -# and other secrets in external (to wpa_supplicant) location. This allows, for -# example, operating system specific key storage to be used -# -# External password backend for testing purposes (developer use) -#CONFIG_EXT_PASSWORD_TEST=y diff --git a/meta-digi-dey/recipes-connectivity/wpa-supplicant/wpa-supplicant/cpx2/wpa_supplicant.conf b/meta-digi-dey/recipes-connectivity/wpa-supplicant/wpa-supplicant/cpx2/wpa_supplicant.conf deleted file mode 100644 index c58405e58..000000000 --- a/meta-digi-dey/recipes-connectivity/wpa-supplicant/wpa-supplicant/cpx2/wpa_supplicant.conf +++ /dev/null @@ -1,33 +0,0 @@ -ctrl_interface=/var/run/wpa_supplicant -ctrl_interface_group=0 -fast_reauth=1 -update_config=1 - -## -- Example MANAGED network -ap_scan=1 # MANAGED mode -network={ - scan_ssid=1 - ssid="" - key_mgmt=NONE -} - -## -- Example AD-HOC network -# ap_scan=1 # AD-HOC mode (Atheros driver) -# network={ -# mode=1 -# frequency=2412 -# ssid="adhoc_network" -# key_mgmt=NONE -# } - -# -- SoftAP mode -# ap_scan=2 -# network={ -# ssid="ath6kl-ap" -# mode=2 -# frequency=2412 -# key_mgmt=WPA-PSK -# proto=RSN -# pairwise=CCMP -# psk="12345678" -# } diff --git a/sdk/build.sh b/sdk/build.sh index 54a1253e4..422eff5bd 100755 --- a/sdk/build.sh +++ b/sdk/build.sh @@ -92,7 +92,6 @@ done<<-_EOF_ ccardimx28js - e w wb web web1 ccimx51js 128 128a 128agv agv eagv w w128a w128agv wagv weagv ccimx53js - 128 4k e e4k w w128 we - cpx2 - wr21 - _EOF_ @@ -103,7 +102,6 @@ done<<-_EOF_ ccardimx28js y ccimx51js n ccimx53js n - cpx2 n wr21 n _EOF_ diff --git a/sdk/config/cpx2/bblayers.conf.sample b/sdk/config/cpx2/bblayers.conf.sample deleted file mode 100644 index f8a746727..000000000 --- a/sdk/config/cpx2/bblayers.conf.sample +++ /dev/null @@ -1,22 +0,0 @@ -# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf -# changes incompatibly -LCONF_VERSION = "6" - -BBPATH = "${TOPDIR}" -BBFILES ?= "" - -BBLAYERS ?= " \ - ##COREBASE##/meta \ - ##COREBASE##/meta-yocto \ - ##COREBASE##/meta-yocto-bsp \ - ##DIGIBASE##/meta-openembedded/meta-oe \ - ##DIGIBASE##/meta-openembedded/meta-networking \ - ##DIGIBASE##/meta-openembedded/meta-webserver \ - ##DIGIBASE##/meta-fsl-arm \ - ##DIGIBASE##/meta-digi/meta-digi-arm \ - ##DIGIBASE##/meta-digi/meta-digi-dey \ - " -BBLAYERS_NON_REMOVABLE ?= " \ - ##COREBASE##/meta \ - ##COREBASE##/meta-yocto \ - " diff --git a/sdk/config/cpx2/local.conf.sample b/sdk/config/cpx2/local.conf.sample deleted file mode 100644 index 4c0277c1f..000000000 --- a/sdk/config/cpx2/local.conf.sample +++ /dev/null @@ -1,256 +0,0 @@ -# -# This file is your local configuration file and is where all local user settings -# are placed. The comments in this file give some guide to the options a new user -# to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. -# -# Lines starting with the '#' character are commented out and in some cases the -# default values are provided as comments to show people example syntax. Enabling -# the option is a question of removing the # character and making any change to the -# variable as required. - -# -# Parallelism Options -# -# These two options control how much parallelism BitBake should use. The first -# option determines how many tasks bitbake should run in parallel: -# -#BB_NUMBER_THREADS = "4" -# -# The second option controls how many processes make should run in parallel when -# running compile tasks: -# -#PARALLEL_MAKE = "-j 4" -# -# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would -# be appropriate for example. - -# -# Machine Selection -# -# You need to select a specific machine to target the build with. There are a selection -# of emulated machines available which can boot and run in the QEMU emulator: -# -#MACHINE ?= "qemuarm" -#MACHINE ?= "qemumips" -#MACHINE ?= "qemuppc" -#MACHINE ?= "qemux86" -#MACHINE ?= "qemux86-64" -# -# There are also the following hardware board target machines included for -# demonstration purposes: -# -#MACHINE ?= "atom-pc" -#MACHINE ?= "beagleboard" -#MACHINE ?= "mpc8315e-rdb" -#MACHINE ?= "routerstationpro" -# -# This sets the default machine to be qemux86 if no other machine is selected: -#MACHINE ??= "qemux86" - -MACHINE = "cpx2" -MACHINE_VARIANT = "" - -# -# Use Digi's internal git repositories -# -#DIGI_INTERNAL_GIT ?= "1" - -# -# Where to place downloads -# -# During a first build the system will download many different source code tarballs -# from various upstream projects. This can take a while, particularly if your network -# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you -# can preserve this directory to speed up this part of subsequent builds. This directory -# is safe to share between multiple builds on the same machine too. -# -# The default is a downloads directory under TOPDIR which is the build directory. -# -#DL_DIR ?= "${TOPDIR}/downloads" - -# -# Where to place shared-state files -# -# BitBake has the capability to accelerate builds based on previously built output. -# This is done using "shared state" files which can be thought of as cache objects -# and this option determines where those files are placed. -# -# You can wipe out TMPDIR leaving this directory intact and the build would regenerate -# from these files if no changes were made to the configuration. If changes were made -# to the configuration, only shared state files where the state was still valid would -# be used (done using checksums). -# -# The default is a sstate-cache directory under TOPDIR. -# -#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" - -# -# Where to place the build output -# -# This option specifies where the bulk of the building work should be done and -# where BitBake should place its temporary files and output. Keep in mind that -# this includes the extraction and compilation of many applications and the toolchain -# which can use Gigabytes of hard disk space. -# -# The default is a tmp directory under TOPDIR. -# -#TMPDIR = "${TOPDIR}/tmp" - -# -# Default policy config -# -# The distribution setting controls which policy settings are used as defaults. -# The default value is fine for general Yocto project use, at least initially. -# Ultimately when creating custom policy, people will likely end up subclassing -# these defaults. -# -DISTRO ?= "dey" -# As an example of a subclass there is a "bleeding" edge policy configuration -# where many versions are set to the absolute latest code from the upstream -# source control systems. This is just mentioned here as an example, its not -# useful to most new users. -# DISTRO ?= "poky-bleeding" - -# -# Package Management configuration -# -# This variable lists which packaging formats to enable. Multiple package backends -# can be enabled at once and the first item listed in the variable will be used -# to generate the root filesystems. -# Options are: -# - 'package_deb' for debian style deb files -# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) -# - 'package_rpm' for rpm style packages -# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" -# We default to rpm: -PACKAGE_CLASSES ?= "package_ipk" - -# -# SDK/ADT target architecture -# -# This variable specified the architecture to build SDK/ADT items for and means -# you can build the SDK packages for architectures other than the machine you are -# running the build on (i.e. building i686 packages on an x86_64 host._ -# Supported values are i686 and x86_64 -#SDKMACHINE ?= "i686" - -# -# Extra image configuration defaults -# -# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated -# images. Some of these options are added to certain image types automatically. The -# variable can contain the following options: -# "dbg-pkgs" - add -dbg packages for all installed packages -# (adds symbol information for debugging/profiling) -# "dev-pkgs" - add -dev packages for all installed packages -# (useful if you want to develop against libs in the image) -# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages -# (useful if you want to run the package test suites) -# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) -# "tools-debug" - add debugging tools (gdb, strace) -# "eclipse-debug" - add Eclipse remote debugging support -# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) -# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) -# "debug-tweaks" - make an image suitable for development -# e.g. ssh root access has a blank password -# There are other application targets that can be used here too, see -# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. -# We default to enabling the debugging tweaks. -EXTRA_IMAGE_FEATURES = "debug-tweaks" - -# -# Additional image features -# -# The following is a list of additional classes to use when building images which -# enable extra features. Some available options which can be included in this variable -# are: -# - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# - 'image-swab' to perform host system intrusion detection -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" - -# -# Runtime testing of images -# -# The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line -#IMAGETEST = "qemu" -# -# This variable controls which tests are run against virtual images if enabled -# above. The following would enable bat, boot the test case under the sanity suite -# and perform toolchain tests -#TEST_SCEN = "sanity bat sanity:boot toolchain" -# -# Because of the QEMU booting slowness issue (see bug #646 and #618), the -# autobuilder may suffer a timeout issue when running sanity tests. We introduce -# the variable TEST_SERIALIZE here to reduce the time taken by the sanity tests. -# It is set to 1 by default, which will boot the image and run cases in the same -# image without rebooting or killing the machine instance. If it is set to 0, the -# image will be copied and tested for each case, which will take longer but be -# more precise. -#TEST_SERIALIZE = "1" - -# -# Interactive shell configuration -# -# Under certain circumstances the system may need input from you and to do this it -# can launch an interactive shell. It needs to do this since the build is -# multithreaded and needs to be able to handle the case where more than one parallel -# process may require the user's attention. The default is iterate over the available -# terminal types to find one that works. -# -# Examples of the occasions this may happen are when resolving patches which cannot -# be applied, to use the devshell or the kernel menuconfig -# -# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none -# Note: currently, Konsole support only works for KDE 3.x due to the way -# newer Konsole versions behave -#OE_TERMINAL = "auto" -# By default disable interactive patch resolution (tasks will just fail instead): -PATCHRESOLVE = "noop" - -# -# Disk Space Monitoring during the build -# -# Monitor the disk space during the build. If there is less that 1GB of space or less -# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort -# of the build. The reason for this is that running completely out of space can corrupt -# files and damages the build in ways which may not be easily recoverable. -BB_DISKMON_DIRS = "\ - STOPTASKS,${TMPDIR},1G,100K \ - STOPTASKS,${DL_DIR},1G,100K \ - STOPTASKS,${SSTATE_DIR},1G,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K" - -# -# Shared-state files from other locations -# -# As mentioned above, shared state files are prebuilt cache data objects which can -# used to accelerate build time. This variable can be used to configure the system -# to search other mirror locations for these objects before it builds the data itself. -# -# This can be a filesystem directory, or a remote url such as http or ftp. These -# would contain the sstate-cache results from previous builds (possibly from other -# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the -# cache locations to check for the shared objects. -# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH -# at the end as shown in the examples below. This will be substituted with the -# correct path within the directory structure. -#SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ -#file://.* file:///some/local/dir/sstate/PATH" - -# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to -# track the version of this file when it was generated. This can safely be ignored if -# this doesn't mean anything to you. -CONF_VERSION = "1"