Merge tag 'dey-3.2-r1.2' into dey-3.2/master
Digi Embedded Yocto 3.2-r1.2 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit is contained in:
Mike Engel
commit
216d06e723
12
README.md
12
README.md
|
|
@ -111,10 +111,20 @@ Documentation is available online at https://www.digi.com/resources/documentatio
|
|||
* Updated Qt 5.15.2
|
||||
* Updated bluez5 to v5.55
|
||||
* Updated gstreamer1.0 to v1.16.3
|
||||
* Updated OpenSSL to v1.1.1i
|
||||
* Updated OpenSSL to v1.1.1k
|
||||
* Updated busybox to v1.32.0
|
||||
* Updated NetworkManager to v1.22.14
|
||||
* Package upgrades and security fixes
|
||||
* Updated i.MX8 SCU firmware to v1.7.1.1
|
||||
* Updated mca-tool to v1.24
|
||||
* Updated trustfence-tool to v2.5
|
||||
* Added support for Dual boot mechanism
|
||||
* Added support for Google Coral AI devices
|
||||
* Trustfence: added support for generic partition encryption
|
||||
* MCA: added support for GPIO-refreshed watchdog
|
||||
* Improved WebKit performance
|
||||
* Improved installation scripts
|
||||
* Updated CC6UL RF calibration
|
||||
|
||||
# Known Issues and Limitations
|
||||
|
||||
|
|
|
|||
|
|
@ -291,11 +291,17 @@ IMAGE_CMD_sdcard() {
|
|||
SDIMG_BOOT="$(readlink -e ${SDIMG_BOOTLOADER})"
|
||||
fi
|
||||
|
||||
# Decompress rootfs image
|
||||
gzip -d -k ${SDIMG_ROOTFS}.gz
|
||||
|
||||
# Burn bootloader, boot and rootfs partitions
|
||||
dd if=${SDIMG_BOOT} of=${SDIMG} conv=notrunc,fsync seek=${BOOTLOADER_SEEK} bs=1K
|
||||
dd if=${SDIMG_BOOTFS} of=${SDIMG} conv=notrunc,fsync seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
|
||||
dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc,fsync seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024 + ${BOOT_SPACE_ALIGNED} \* 1024)
|
||||
|
||||
# Delete the decompressed rootfs image
|
||||
rm -f ${SDIMG_ROOTFS}
|
||||
}
|
||||
|
||||
# The sdcard image requires the boot and rootfs images to be built before
|
||||
IMAGE_TYPEDEP_sdcard = "${SDIMG_BOOTFS_TYPE} ${SDIMG_ROOTFS_TYPE}"
|
||||
IMAGE_TYPEDEP_sdcard = "${SDIMG_BOOTFS_TYPE} ${SDIMG_ROOTFS_TYPE}.gz"
|
||||
|
|
|
|||
|
|
@ -47,4 +47,4 @@ XBEE_TTY ?= "ttymxc4"
|
|||
BOOT_SCRIPTS = "boot.scr:boot.scr"
|
||||
|
||||
# Flash image types
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4 sdcard tar.bz2 recovery.vfat"
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4.gz sdcard.gz tar.bz2 recovery.vfat"
|
||||
|
|
|
|||
|
|
@ -47,4 +47,4 @@ XBEE_TTY ?= "ttymxc4"
|
|||
BOOT_SCRIPTS = "boot.scr:boot.scr"
|
||||
|
||||
# Flash image types
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4 sdcard tar.bz2 recovery.vfat"
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4.gz sdcard.gz tar.bz2 recovery.vfat"
|
||||
|
|
|
|||
|
|
@ -21,6 +21,7 @@ UBOOT_DTB_NAME = "ccimx8mm-dvk.dtb"
|
|||
|
||||
KERNEL_DEVICETREE ?= " \
|
||||
digi/ccimx8mm-dvk.dtb \
|
||||
digi/_ov_board_gpio-watchdog_ccimx8m-dvk.dtbo \
|
||||
digi/_ov_board_hsd101pfw2-lvds_ccimx8m-dvk.dtbo \
|
||||
digi/_ov_board_lvds_ccimx8m-dvk.dtbo \
|
||||
digi/_ov_board_user-leds_ccimx8m-dvk.dtbo \
|
||||
|
|
@ -43,4 +44,4 @@ XBEE_TTY ?= "ttymxc3"
|
|||
BOOT_SCRIPTS = "boot.scr:boot.scr"
|
||||
|
||||
# Flash image types
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4 sdcard tar.bz2 recovery.vfat"
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4.gz sdcard.gz tar.bz2 recovery.vfat"
|
||||
|
|
|
|||
|
|
@ -21,6 +21,7 @@ UBOOT_DTB_NAME = "ccimx8mn-dvk.dtb"
|
|||
|
||||
KERNEL_DEVICETREE ?= " \
|
||||
digi/ccimx8mn-dvk.dtb \
|
||||
digi/_ov_board_gpio-watchdog_ccimx8m-dvk.dtbo \
|
||||
digi/_ov_board_hsd101pfw2-lvds_ccimx8m-dvk.dtbo \
|
||||
digi/_ov_board_lvds_ccimx8m-dvk.dtbo \
|
||||
digi/_ov_board_user-leds_ccimx8m-dvk.dtbo \
|
||||
|
|
@ -45,4 +46,4 @@ XBEE_TTY ?= "ttymxc3"
|
|||
BOOT_SCRIPTS = "boot.scr:boot.scr"
|
||||
|
||||
# Flash image types
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4 sdcard tar.bz2 recovery.vfat"
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4.gz sdcard.gz tar.bz2 recovery.vfat"
|
||||
|
|
|
|||
|
|
@ -33,4 +33,4 @@ XBEE_TTY ?= "ttyLP0"
|
|||
BOOT_SCRIPTS = "boot.scr:boot.scr"
|
||||
|
||||
# Flash image types
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4 sdcard tar.bz2 recovery.vfat"
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4.gz sdcard.gz tar.bz2 recovery.vfat"
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@ UBOOT_CONFIG[ccimx8x_sbc_pro512MB] = "ccimx8x_sbc_pro512MB_defconfig,,u-boot-dtb
|
|||
KERNEL_DEVICETREE ?= " \
|
||||
digi/ccimx8x-sbc-pro.dtb \
|
||||
digi/_ov_board_flexcan1_ccimx8x-sbc-pro.dtbo \
|
||||
digi/_ov_board_gpio-watchdog_ccimx8x-sbc-pro.dtbo \
|
||||
digi/_ov_board_hsd101pfw2-lvds_ccimx8x-sbc-pro.dtbo \
|
||||
digi/_ov_board_lpuart3_ccimx8x-sbc-pro.dtbo \
|
||||
digi/_ov_board_lt9812-hdmi-dsi0_ccimx8x-sbc-pro.dtbo \
|
||||
|
|
@ -45,4 +46,4 @@ BOOT_SCRIPTS = "boot.scr:boot.scr"
|
|||
UBOOT_HAS_FASTBOOT = "true"
|
||||
|
||||
# Flash image types
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4 sdcard tar.bz2 recovery.vfat"
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4.gz sdcard.gz tar.bz2 recovery.vfat"
|
||||
|
|
|
|||
Binary file not shown.
|
|
@ -0,0 +1,27 @@
|
|||
From: Arturo Buzarra <arturo.buzarra@digi.com>
|
||||
Date: Mon, 28 Jun 2021 15:00:58 +0200
|
||||
Subject: [PATCH] gstreamer: fix video sink for wayland images
|
||||
|
||||
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
|
||||
---
|
||||
gstreamer/gstreamer.py | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/gstreamer/gstreamer.py b/gstreamer/gstreamer.py
|
||||
index 2676439..e055d77 100644
|
||||
--- a/gstreamer/gstreamer.py
|
||||
+++ b/gstreamer/gstreamer.py
|
||||
@@ -249,11 +249,11 @@ def run_pipeline(user_function,
|
||||
scale_caps = 'video/x-raw,width={width},height={height}'.format(width=scale[0], height=scale[1])
|
||||
PIPELINE += """ ! tee name=t
|
||||
t. ! {leaky_q} ! videoconvert ! videoscale ! {scale_caps} ! videobox name=box autocrop=true
|
||||
! {sink_caps} ! {sink_element}
|
||||
t. ! {leaky_q} ! videoconvert
|
||||
- ! rsvgoverlay name=overlay ! videoconvert ! ximagesink sync=false
|
||||
+ ! rsvgoverlay name=overlay ! videoconvert ! waylandsink sync=false
|
||||
"""
|
||||
|
||||
SINK_ELEMENT = 'appsink name=appsink emit-signals=true max-buffers=1 drop=true'
|
||||
SINK_CAPS = 'video/x-raw,format=RGB,width={width},height={height}'
|
||||
LEAKY_Q = 'queue max-size-buffers=1 leaky=downstream'
|
||||
--
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
SUMMARY = "Edge TPU keyphrase detector"
|
||||
HOMEPAGE = "https://coral.ai/examples"
|
||||
LICENSE = "Apache-2.0"
|
||||
LIC_FILES_CHKSUM = "file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
|
||||
|
||||
SRCREV = "655a354df5f939602ff6b9da2cbc4d2c78898107"
|
||||
SRC_URI = "git://github.com/google-coral/project-bodypix.git;protocol=https"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
RDEPENDS_${PN} = "python3-pycoral \
|
||||
python3-svgwrite \
|
||||
python3-scipy \
|
||||
libusb1 \
|
||||
"
|
||||
|
||||
do_install() {
|
||||
# Install Gstreamer examples
|
||||
install -d ${D}/opt/libedgetpu
|
||||
install -d ${D}/opt/libedgetpu/bodypix
|
||||
install -d ${D}/opt/libedgetpu/bodypix/models
|
||||
install -d ${D}/opt/libedgetpu/bodypix/posenet_lib
|
||||
install -d ${D}/opt/libedgetpu/bodypix/posenet_lib/aarch64
|
||||
|
||||
install -m 0555 ${S}/models/bodypix_mobilenet* ${D}/opt/libedgetpu/bodypix/models/
|
||||
install -m 0555 ${S}/bodypix.py ${D}/opt/libedgetpu/bodypix
|
||||
install -m 0555 ${S}/gstreamer.py ${D}/opt/libedgetpu/bodypix
|
||||
install -m 0555 ${S}/pose_engine.py ${D}/opt/libedgetpu/bodypix
|
||||
|
||||
install -m 0555 ${S}/posenet_lib/aarch64/posenet_decoder.so ${D}/opt/libedgetpu/bodypix/posenet_lib/aarch64
|
||||
}
|
||||
|
||||
FILES_${PN} += "/opt/libedgetpu/bodypix/* \
|
||||
"
|
||||
|
||||
INSANE_SKIP_${PN} += "already-stripped"
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
SUMMARY = "Edge TPU simple camera examples"
|
||||
HOMEPAGE = "https://coral.ai/examples"
|
||||
LICENSE = "Apache-2.0"
|
||||
LIC_FILES_CHKSUM = "file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
|
||||
|
||||
SRCREV = "19335531f599133e054ec2ddcc31733d24031ba5"
|
||||
SRC_URI = "git://github.com/google-coral/examples-camera.git;protocol=https \
|
||||
file://0001-gstreamer-fix-video-sink-for-wayland-images.patch \
|
||||
"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
inherit gobject-introspection
|
||||
|
||||
RDEPENDS_${PN} = "python3-pycoral \
|
||||
gstreamer1.0-plugins-base \
|
||||
"
|
||||
|
||||
do_configure() {
|
||||
bash download_models.sh
|
||||
}
|
||||
|
||||
do_install() {
|
||||
# Install Gstreamer examples
|
||||
install -d ${D}/opt/libedgetpu
|
||||
install -d ${D}/opt/libedgetpu/camera
|
||||
install -d ${D}/opt/libedgetpu/camera/all_models
|
||||
install -d ${D}/opt/libedgetpu/camera/gstreamer
|
||||
rm -f ${S}/gstreamer/install_requirements.sh
|
||||
install -m 0555 ${S}/all_models/* ${D}/opt/libedgetpu/camera/all_models/
|
||||
install -m 0555 ${S}/gstreamer/* ${D}/opt/libedgetpu/camera/gstreamer/
|
||||
}
|
||||
|
||||
FILES_${PN} += "/opt/libedgetpu/camera/* \
|
||||
"
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
SUMMARY = "Edge TPU keyphrase detector"
|
||||
HOMEPAGE = "https://coral.ai/examples"
|
||||
LICENSE = "Apache-2.0"
|
||||
LIC_FILES_CHKSUM = "file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
|
||||
|
||||
SRCREV = "43a5fd0578c75c9140b4f057de74f2dbac96ceff"
|
||||
SRC_URI = "git://github.com/google-coral/project-keyword-spotter.git;protocol=https"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
RDEPENDS_${PN} = "python3-pycoral \
|
||||
python3-pyaudio \
|
||||
"
|
||||
|
||||
do_install() {
|
||||
# Install Gstreamer examples
|
||||
install -d ${D}/opt/libedgetpu
|
||||
install -d ${D}/opt/libedgetpu/keyword
|
||||
install -d ${D}/opt/libedgetpu/keyword/models
|
||||
install -d ${D}/opt/libedgetpu/keyword/config
|
||||
|
||||
install -m 0555 ${S}/models/* ${D}/opt/libedgetpu/keyword/models/
|
||||
install -m 0555 ${S}/run_model.py ${D}/opt/libedgetpu/keyword
|
||||
install -m 0555 ${S}/mel_features.py ${D}/opt/libedgetpu/keyword
|
||||
install -m 0555 ${S}/model.py ${D}/opt/libedgetpu/keyword
|
||||
install -m 0555 ${S}/audio_recorder.py ${D}/opt/libedgetpu/keyword
|
||||
|
||||
install -m 0555 ${S}/config/labels_gc2.raw.txt ${D}/opt/libedgetpu/keyword/config
|
||||
install -m 0555 ${S}/config/commands_v2.txt ${D}/opt/libedgetpu/keyword/config
|
||||
}
|
||||
|
||||
FILES_${PN} += "/opt/libedgetpu/keyword/* \
|
||||
"
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
SUMMARY = "Edge TPU runtime library for Coral devices"
|
||||
HOMEPAGE = "https://coral.googlesource.com/edgetpu"
|
||||
LICENSE = "Apache-2.0"
|
||||
LIC_FILES_CHKSUM = "file://libedgetpu/LICENSE.txt;md5=c0e85c67b919e863a1a7a3da109dc40d"
|
||||
|
||||
SRC_URI = "https://dl.google.com/coral/edgetpu_api/edgetpu_runtime_20210119.zip"
|
||||
SRC_URI[md5sum] = "5c0b992d73683e395d6993761064d2df"
|
||||
SRC_URI[sha256sum] = "b23b2c5a227d7f0e65dcc91585028d27c12e764f8ce4c4db3f114be4a49af3ae"
|
||||
|
||||
S = "${WORKDIR}/edgetpu_runtime"
|
||||
|
||||
RDEPENDS_${PN} = "libusb1"
|
||||
|
||||
# The library files in direct correspond to max frequency, those in throttled correspond to reduced frequency.
|
||||
LIBEDGETPU_TYPE = "direct"
|
||||
LIBEDGETPU_ARCH = "aarch64"
|
||||
|
||||
do_install() {
|
||||
install -d ${D}${sysconfdir}/udev/rules.d
|
||||
install -m 0644 ${S}/libedgetpu/edgetpu-accelerator.rules \
|
||||
${D}${sysconfdir}/udev/rules.d/99-edgetpu-accelerator.rules
|
||||
|
||||
install -d ${D}/${libdir}
|
||||
install -m 755 ${S}/libedgetpu/${LIBEDGETPU_TYPE}/${LIBEDGETPU_ARCH}/libedgetpu.so.1.0 \
|
||||
${D}/${libdir}/libedgetpu.so.1.0
|
||||
ln -sf ${libdir}/libedgetpu.so.1.0 ${D}/${libdir}/libedgetpu.so.1
|
||||
ln -sf ${libdir}/libedgetpu.so.1.0 ${D}/${libdir}/libedgetpu.so
|
||||
|
||||
install -d ${D}/${includedir}
|
||||
install -m 755 ${S}/libedgetpu/edgetpu.h ${D}/${includedir}/edgetpu.h
|
||||
}
|
||||
|
||||
FILES_${PN} += "${libdir}/libedgetpu.so \
|
||||
${includedir}/edgetpu.h \
|
||||
"
|
||||
|
||||
INSANE_SKIP_${PN} += "already-stripped"
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
SUMMARY = "TensorFlow Lite Python Library"
|
||||
DESCRIPTION = "TensorFlow Lite is the official solution for running machine learning models on mobile and embedded devices."
|
||||
SECTION = "devel/python"
|
||||
HOMEPAGE = "https://www.tensorflow.org/lite/"
|
||||
LICENSE = "Apache-2.0"
|
||||
LIC_FILES_CHKSUM = "file://${S}/tflite_runtime-2.5.0.dist-info/METADATA;md5=8c4b9e107a64b0121980a8705094014b"
|
||||
|
||||
PYTHON_PACKAGE = "tflite_runtime-2.5.0-cp38-cp38-linux_aarch64.whl"
|
||||
|
||||
SRC_URI = "https://github.com/google-coral/pycoral/releases/download/v1.0.1/${PYTHON_PACKAGE};downloadfilename=${PYTHON_PACKAGE};subdir=${BP}"
|
||||
SRC_URI[md5sum] = "9c47617e1fa0bdca673a78b8b6688d64"
|
||||
SRC_URI[sha256sum] = "b87a4c152be05d3585521a1d5418f7645a4fb82965772489b983e93aae6bd9ac"
|
||||
|
||||
DEPENDS = "python3 python3-pip-native python3-wheel-native"
|
||||
|
||||
RDEPENDS_${PN} = "${PYTHON_PN} \
|
||||
${PYTHON_PN}-numpy \
|
||||
"
|
||||
|
||||
inherit python3native
|
||||
|
||||
do_unpack[depends] += "unzip-native:do_populate_sysroot"
|
||||
|
||||
do_unpack_extra(){
|
||||
[ -d ${S} ] || mkdir -p ${S}
|
||||
cd ${S}
|
||||
unzip -q -o ${S}/${PYTHON_PACKAGE} -d ${S}
|
||||
}
|
||||
addtask unpack_extra after do_unpack before do_patch
|
||||
|
||||
do_install() {
|
||||
# Install pip package
|
||||
install -d ${D}/${PYTHON_SITEPACKAGES_DIR}
|
||||
${STAGING_BINDIR_NATIVE}/pip3 install --disable-pip-version-check -v \
|
||||
-t ${D}/${PYTHON_SITEPACKAGES_DIR} --no-cache-dir --no-deps \
|
||||
${WORKDIR}/${BP}/tflite_runtime-*.whl
|
||||
}
|
||||
|
||||
FILES_${PN} += "\
|
||||
${libdir}/${PYTHON_DIR}/site-packages/* \
|
||||
"
|
||||
|
||||
INSANE_SKIP_${PN} += "already-stripped"
|
||||
|
||||
COMPATIBLE_MACHINE = "(-)"
|
||||
COMPATIBLE_MACHINE_aarch64 = "(.*)"
|
||||
|
|
@ -48,7 +48,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
|
|||
|
|
@ -59,7 +59,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
|
|||
|
|
@ -59,7 +59,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -73,7 +73,7 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.ubifs
|
||||
|
|
|
|||
|
|
@ -87,7 +87,7 @@ uuu fb: ucmd setenv stdout serial,fastboot
|
|||
if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
|
||||
module_variant=$(getenv "module_variant")
|
||||
# Determine U-Boot file to program basing on SOM's variant
|
||||
if [ -n "$module_variant" ]; then
|
||||
if [ -n "$module_variant" ] || [ "$module_variant" = "0x00" ]; then
|
||||
if [ "$module_variant" = "0x08" ] || \
|
||||
[ "$module_variant" = "0x09" ]; then
|
||||
INSTALL_UBOOT_FILENAME="u-boot-##MACHINE##512MB.imx"
|
||||
|
|
@ -110,13 +110,13 @@ if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
|
|||
echo ""
|
||||
echo "[ERROR] Cannot determine U-Boot file for this module!"
|
||||
echo ""
|
||||
echo "1. Add U-boot file name, depending on your ConnectCore 8X variant, to script command line:"
|
||||
echo "1. Add U-boot file name, depending on your ConnectCore 6UL variant, to script command line:"
|
||||
echo " - For a SOM with 1GB DDR3, run:"
|
||||
echo " => ./install_linux_fs_uuu.sh -u u-boot-##MACHINE##1GB.imx"
|
||||
echo " => ./install_linux_fw_uuu.sh -u u-boot-##MACHINE##1GB.imx"
|
||||
echo " - For a SOM with 512MB DDR3, run:"
|
||||
echo " => ./install_linux_fs_uuu.sh -u u-boot-##MACHINE##512MB.imx"
|
||||
echo " => ./install_linux_fw_uuu.sh -u u-boot-##MACHINE##512MB.imx"
|
||||
echo " - For a SOM with 256MB DDR3, run:"
|
||||
echo " => ./install_linux_fs_uuu.sh -u u-boot-##MACHINE##.imx"
|
||||
echo " => ./install_linux_fw_uuu.sh -u u-boot-##MACHINE##.imx"
|
||||
echo ""
|
||||
echo "2. Run the install script again."
|
||||
echo ""
|
||||
|
|
|
|||
|
|
@ -19,7 +19,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
|
|||
|
|
@ -19,7 +19,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
|
|||
|
|
@ -101,6 +101,18 @@ INSTALL_LINUX_FILENAME="${BASEFILENAME}-##MACHINE##.boot.vfat"
|
|||
INSTALL_RECOVERY_FILENAME="${BASEFILENAME}-##MACHINE##.recovery.vfat"
|
||||
INSTALL_ROOTFS_FILENAME="${BASEFILENAME}-##MACHINE##.ext4"
|
||||
|
||||
COMPRESSED_ROOTFS_IMAGE="${INSTALL_ROOTFS_FILENAME}.gz"
|
||||
|
||||
# If the rootfs image is compressed, make sure to decompress it before the update
|
||||
if [ -f ${COMPRESSED_ROOTFS_IMAGE} ] && [ ! -f ${INSTALL_ROOTFS_FILENAME} ]; then
|
||||
echo "\033[36m"
|
||||
echo "====================================================================================="
|
||||
echo "Decompressing rootfs image '${COMPRESSED_ROOTFS_IMAGE}'"
|
||||
echo "====================================================================================="
|
||||
echo "\033[0m"
|
||||
gzip -d -k -f "${COMPRESSED_ROOTFS_IMAGE}"
|
||||
fi
|
||||
|
||||
# Verify existance of files before starting the update
|
||||
FILES="${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}"
|
||||
for f in ${FILES}; do
|
||||
|
|
@ -189,6 +201,13 @@ uuu fb: acmd reset
|
|||
# Wait for the target to reset
|
||||
sleep 3
|
||||
|
||||
# Restart fastboot with the latest MMC partition configuration
|
||||
uuu fb: ucmd setenv fastboot_dev sata
|
||||
uuu fb: ucmd setenv fastboot_dev mmc
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
# Update Linux
|
||||
part_update "linux" "${INSTALL_LINUX_FILENAME}"
|
||||
|
||||
|
|
@ -198,6 +217,11 @@ part_update "recovery" "${INSTALL_RECOVERY_FILENAME}"
|
|||
# Update Rootfs
|
||||
part_update "rootfs" "${INSTALL_ROOTFS_FILENAME}"
|
||||
|
||||
# If the rootfs image was originally compressed, remove the uncompressed image
|
||||
if [ -f ${COMPRESSED_ROOTFS_IMAGE} ] && [ -f ${INSTALL_ROOTFS_FILENAME} ]; then
|
||||
rm -f "${INSTALL_ROOTFS_FILENAME}"
|
||||
fi
|
||||
|
||||
# Configure u-boot to boot into recovery mode
|
||||
uuu fb: ucmd setenv boot_recovery yes
|
||||
uuu fb: ucmd setenv recovery_command wipe_update
|
||||
|
|
|
|||
|
|
@ -90,7 +90,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
|
|||
|
|
@ -90,7 +90,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -110,7 +110,7 @@ if test "${install_abort}" = "1"; then
|
|||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
|
|
@ -193,7 +193,7 @@ setenv bootcmd "
|
|||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
||||
update linux usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux partition!\";
|
||||
echo \"\";
|
||||
|
|
|
|||
|
|
@ -101,16 +101,16 @@ if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
|||
if [ -z "${module_ram}" ]; then
|
||||
module_variant=$(getenv "module_variant")
|
||||
# Determine U-Boot file to program basing on SOM's variant
|
||||
if [ -n "$module_variant" ]; then
|
||||
if [ "$module_variant" == "0x01" ] || \
|
||||
[ "$module_variant" == "0x04" ] || \
|
||||
[ "$module_variant" == "0x05" ]; then
|
||||
if [ -n "$module_variant" ] || [ "$module_variant" = "0x00" ]; then
|
||||
if [ "$module_variant" = "0x01" ] || \
|
||||
[ "$module_variant" = "0x04" ] || \
|
||||
[ "$module_variant" = "0x05" ]; then
|
||||
module_ram="1GB"
|
||||
elif [ "$module_variant" == "0x02" ] || \
|
||||
[ "$module_variant" == "0x03" ]; then
|
||||
module_ram="2GB"
|
||||
else
|
||||
elif [ "$module_variant" = "0x06" ] || \
|
||||
[ "$module_variant" = "0x09" ]; then
|
||||
module_ram="512MB"
|
||||
else
|
||||
module_ram="2GB"
|
||||
fi
|
||||
INSTALL_UBOOT_FILENAME="imx-boot-##MACHINE##-${soc_rev}-${module_ram}_${bus_width}.bin"
|
||||
fi
|
||||
|
|
@ -130,13 +130,13 @@ if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
|||
echo ""
|
||||
echo "1. Add U-boot file name, depending on your ConnectCore 8X variant, to script command line:"
|
||||
echo " - For a QuadXPlus CPU with 1GB LPDDR4, run:"
|
||||
echo " => ./install_linux_fs_uuu.sh -u imx-boot-##MACHINE##-${soc_rev}-1GB_32bit.bin"
|
||||
echo " => ./install_linux_fw_uuu.sh -u imx-boot-##MACHINE##-${soc_rev}-1GB_32bit.bin"
|
||||
echo " - For a QuadXPlus CPU with 2GB LPDDR4, run:"
|
||||
echo " => ./install_linux_fs_uuu.sh -u imx-boot-##MACHINE##-${soc_rev}-2GB_32bit.bin"
|
||||
echo " => ./install_linux_fw_uuu.sh -u imx-boot-##MACHINE##-${soc_rev}-2GB_32bit.bin"
|
||||
echo " - For a DualX CPU with 1GB LPDDR4, run:"
|
||||
echo " => ./install_linux_fs_uuu.sh -u imx-boot-##MACHINE##-${soc_rev}-1GB_16bit.bin"
|
||||
echo " => ./install_linux_fw_uuu.sh -u imx-boot-##MACHINE##-${soc_rev}-1GB_16bit.bin"
|
||||
echo " - For a DualX CPU with 512MB LPDDR4, run:"
|
||||
echo " => ./install_linux_fs_uuu.sh -u imx-boot-##MACHINE##-${soc_rev}-512MB_16bit.bin"
|
||||
echo " => ./install_linux_fw_uuu.sh -u imx-boot-##MACHINE##-${soc_rev}-512MB_16bit.bin"
|
||||
echo ""
|
||||
echo "2. Run the install script again."
|
||||
echo ""
|
||||
|
|
@ -163,6 +163,18 @@ INSTALL_LINUX_FILENAME="${BASEFILENAME}-##MACHINE##.boot.vfat"
|
|||
INSTALL_RECOVERY_FILENAME="${BASEFILENAME}-##MACHINE##.recovery.vfat"
|
||||
INSTALL_ROOTFS_FILENAME="${BASEFILENAME}-##MACHINE##.ext4"
|
||||
|
||||
COMPRESSED_ROOTFS_IMAGE="${INSTALL_ROOTFS_FILENAME}.gz"
|
||||
|
||||
# If the rootfs image is compressed, make sure to decompress it before the update
|
||||
if [ -f ${COMPRESSED_ROOTFS_IMAGE} ] && [ ! -f ${INSTALL_ROOTFS_FILENAME} ]; then
|
||||
echo "\033[36m"
|
||||
echo "====================================================================================="
|
||||
echo "Decompressing rootfs image '${COMPRESSED_ROOTFS_IMAGE}'"
|
||||
echo "====================================================================================="
|
||||
echo "\033[0m"
|
||||
gzip -d -k -f "${COMPRESSED_ROOTFS_IMAGE}"
|
||||
fi
|
||||
|
||||
# Verify existance of files before starting the update
|
||||
FILES="${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}"
|
||||
for f in ${FILES}; do
|
||||
|
|
@ -248,6 +260,10 @@ uuu fb: acmd reset
|
|||
# Wait for the target to reset
|
||||
sleep 3
|
||||
|
||||
# Restart fastboot with the latest MMC partition configuration
|
||||
uuu fb: ucmd setenv fastboot_dev sata
|
||||
uuu fb: ucmd setenv fastboot_dev mmc
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
|
|
@ -260,6 +276,11 @@ part_update "recovery" "${INSTALL_RECOVERY_FILENAME}"
|
|||
# Update Rootfs
|
||||
part_update "rootfs" "${INSTALL_ROOTFS_FILENAME}"
|
||||
|
||||
# If the rootfs image was originally compressed, remove the uncompressed image
|
||||
if [ -f ${COMPRESSED_ROOTFS_IMAGE} ] && [ -f ${INSTALL_ROOTFS_FILENAME} ]; then
|
||||
rm -f "${INSTALL_ROOTFS_FILENAME}"
|
||||
fi
|
||||
|
||||
# Configure u-boot to boot into recovery mode
|
||||
uuu fb: ucmd setenv boot_recovery yes
|
||||
uuu fb: ucmd setenv recovery_command wipe_update
|
||||
|
|
|
|||
|
|
@ -8,13 +8,13 @@ PKGNAME = "mca_tool"
|
|||
|
||||
# ARM tarball
|
||||
SRC_URI_arm = "${DIGI_PKG_SRC}/${PKGNAME}-${PV}-${TUNE_ARCH}.tar.gz;name=arm"
|
||||
SRC_URI[arm.md5sum] = "eeb242ee2baeda8a9a1a48dea634b6ea"
|
||||
SRC_URI[arm.sha256sum] = "40794e0c3baad39b04f2d1640c29620a08036fb36b18583d4f7828fe860bcd89"
|
||||
SRC_URI[arm.md5sum] = "bbeded0a955a026d302cd4ee212d920e"
|
||||
SRC_URI[arm.sha256sum] = "33de60f59bfa3e4b867bd872f05413a823852a1e33b21efcddd714454978bb9a"
|
||||
|
||||
# AARCH64 tarball
|
||||
SRC_URI_aarch64 = "${DIGI_PKG_SRC}/${PKGNAME}-${PV}-${TUNE_ARCH}.tar.gz;name=aarch64"
|
||||
SRC_URI[aarch64.md5sum] = "bd90f295095fead2e58bfa2f6b995c8f"
|
||||
SRC_URI[aarch64.sha256sum] = "64dd676dff0ffee143d22268e0512b40fe428ecf8b5e31496f738fb9b1a8a01f"
|
||||
SRC_URI[aarch64.md5sum] = "cf64de7f5aad9cd6a102afd18aebd8bb"
|
||||
SRC_URI[aarch64.sha256sum] = "c4652b8c0dd54315d7890c47798199948ea595a7dea8de5b6d68a1bfd3853557"
|
||||
|
||||
S = "${WORKDIR}/${PKGNAME}-${PV}"
|
||||
|
||||
|
|
@ -27,6 +27,10 @@ generate_installer_zip () {
|
|||
if readlink -e "${DEPLOY_DIR_IMAGE}/install_linux_fw_uuu.sh"; then
|
||||
INSTALLER_FILELIST="${INSTALLER_FILELIST} ${DEPLOY_DIR_IMAGE}/install_linux_fw_uuu.sh"
|
||||
fi
|
||||
# Decompress the ext4.gz image, if any
|
||||
if readlink -e "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.ext4.gz" >/dev/null; then
|
||||
gzip -d -k -f ${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.ext4.gz
|
||||
fi
|
||||
for ext in ${FSTYPES_WHITELIST}; do
|
||||
if readlink -e "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${ext}" >/dev/null; then
|
||||
INSTALLER_FILELIST="${INSTALLER_FILELIST} ${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${ext}"
|
||||
|
|
@ -50,6 +54,11 @@ _EOF_
|
|||
zip -j ${IMGDEPLOYDIR}/${IMAGE_NAME}.installer.zip ${INSTALLER_FILELIST} ${IMGDEPLOYDIR}/README.txt
|
||||
rm -f ${IMGDEPLOYDIR}/README.txt
|
||||
|
||||
# Delete the decompressed ext4 image, if any
|
||||
if readlink -e "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.ext4" >/dev/null; then
|
||||
rm -f ${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.ext4
|
||||
fi
|
||||
|
||||
# Create the symlink
|
||||
if [ -n "${IMAGE_LINK_NAME}" ] && [ -e "${IMGDEPLOYDIR}/${IMAGE_NAME}.installer.zip" ]; then
|
||||
ln -sf ${IMAGE_NAME}.installer.zip ${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.installer.zip
|
||||
|
|
|
|||
|
|
@ -67,9 +67,18 @@ PREFERRED_VERSION_libsoc = "git"
|
|||
# recipe in case there are NXP-specific changes in it
|
||||
PREFERRED_PROVIDER_opencl-headers ?= "imx-gpu-viv"
|
||||
|
||||
# Use the latest versions of the WebKit recipes
|
||||
PREFERRED_VERSION_cog = "0.9.90"
|
||||
PREFERRED_VERSION_libwpe = "1.10.0"
|
||||
PREFERRED_VERSION_wpebackend-fdo = "1.9.92"
|
||||
PREFERRED_VERSION_wpewebkit = "2.32.1"
|
||||
|
||||
# Use the FDO backend for WPE WebKit
|
||||
PREFERRED_PROVIDER_virtual/wpebackend = "wpebackend-fdo"
|
||||
|
||||
# Use recipe from our meta-digi layer
|
||||
PREFERRED_VERSION_tensorflow-lite ?= "2.5.0"
|
||||
|
||||
SDK_NAME = "${DISTRO}-${TCLIBC}-${SDKMACHINE}-${IMAGE_BASENAME}-${TUNE_PKGARCH}-${MACHINE}"
|
||||
SDKPATH = "/opt/${DISTRO}/${SDK_VERSION}/${MACHINE}"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
From: Gabriel Valcazar <gabriel.valcazar@digi.com>
|
||||
Date: Tue, 10 Nov 2020 16:32:15 +0100
|
||||
Date: Wed, 23 Jun 2021 10:05:24 +0200
|
||||
Subject: [PATCH 1/2] cog: remove the --platform parameter and hardcode the FDO
|
||||
platform
|
||||
|
||||
|
|
@ -8,38 +8,36 @@ platforms, so always use the FDO one by default.
|
|||
|
||||
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
|
||||
---
|
||||
cog.c | 27 ++++-----------------------
|
||||
1 file changed, 4 insertions(+), 23 deletions(-)
|
||||
cog.c | 25 ++++---------------------
|
||||
1 file changed, 4 insertions(+), 21 deletions(-)
|
||||
|
||||
diff --git a/cog.c b/cog.c
|
||||
index 950b14d..5f47d87 100644
|
||||
index 2fdc7b2..bb64506 100644
|
||||
--- a/cog.c
|
||||
+++ b/cog.c
|
||||
@@ -43,10 +43,7 @@ static struct {
|
||||
@@ -40,10 +40,7 @@ static struct {
|
||||
GStrv dir_handlers;
|
||||
GStrv arguments;
|
||||
char *background_color;
|
||||
#if !COG_USE_WEBKITGTK
|
||||
- union {
|
||||
- char *platform_name;
|
||||
- CogPlatform *platform;
|
||||
- };
|
||||
+ CogPlatform *platform;
|
||||
#endif // !COG_USE_WEBKITGTK
|
||||
union {
|
||||
char *action_name;
|
||||
@@ -95,11 +92,6 @@ static GOptionEntry s_cli_options[] =
|
||||
enum webprocess_fail_action action_id;
|
||||
@@ -92,9 +89,6 @@ static GOptionEntry s_cli_options[] =
|
||||
{ "bg-color", 'b', 0, G_OPTION_ARG_STRING, &s_options.background_color,
|
||||
"Background color, as a CSS name or in #RRGGBBAA hex syntax (default: white)",
|
||||
"BG_COLOR" },
|
||||
-#if !COG_USE_WEBKITGTK
|
||||
- { "platform", 'P', 0, G_OPTION_ARG_STRING, &s_options.platform_name,
|
||||
- "Platform plug-in to use.",
|
||||
- "NAME" },
|
||||
-#endif // !COG_USE_WEBKITGTK
|
||||
{ "web-extensions-dir", '\0', 0, G_OPTION_ARG_STRING, &s_options.web_extensions_dir,
|
||||
"Load Web Extensions from given directory.",
|
||||
"PATH"},
|
||||
@@ -301,21 +293,10 @@ platform_setup (CogShell *shell)
|
||||
@@ -299,21 +293,10 @@ platform_setup (CogShell *shell)
|
||||
* a given platform.
|
||||
*/
|
||||
|
||||
|
|
@ -63,4 +61,3 @@ index 950b14d..5f47d87 100644
|
|||
+ strerror (errno));
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -1,19 +1,19 @@
|
|||
From: Gabriel Valcazar <gabriel.valcazar@digi.com>
|
||||
Date: Tue, 10 Nov 2020 16:36:21 +0100
|
||||
Date: Wed, 23 Jun 2021 10:17:59 +0200
|
||||
Subject: [PATCH 2/2] cog-platform-fdo: always use fullscreen mode
|
||||
|
||||
Otherwise, the browser will spawn on a random place on the desktop every time.
|
||||
|
||||
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
|
||||
---
|
||||
platform/cog-platform-fdo.c | 44 ++++++++++---------------------------
|
||||
1 file changed, 12 insertions(+), 32 deletions(-)
|
||||
platform/fdo/cog-platform-fdo.c | 50 ++++++++++-----------------------
|
||||
1 file changed, 15 insertions(+), 35 deletions(-)
|
||||
|
||||
diff --git a/platform/cog-platform-fdo.c b/platform/cog-platform-fdo.c
|
||||
index 7bdf075..08b0b21 100644
|
||||
--- a/platform/cog-platform-fdo.c
|
||||
+++ b/platform/cog-platform-fdo.c
|
||||
@@ -1911,39 +1911,19 @@ create_window (GError **error)
|
||||
diff --git a/platform/fdo/cog-platform-fdo.c b/platform/fdo/cog-platform-fdo.c
|
||||
index c7e1eea..4f6c0c7 100644
|
||||
--- a/platform/fdo/cog-platform-fdo.c
|
||||
+++ b/platform/fdo/cog-platform-fdo.c
|
||||
@@ -2134,42 +2134,22 @@ create_window (GError **error)
|
||||
configure_surface_geometry (0, 0);
|
||||
}
|
||||
|
||||
|
|
@ -26,6 +26,9 @@ index 7bdf075..08b0b21 100644
|
|||
-
|
||||
- if (wl_data.xdg_shell != NULL) {
|
||||
- xdg_toplevel_set_fullscreen (win_data.xdg_toplevel, NULL);
|
||||
- } else if (wl_data.fshell != NULL) {
|
||||
- win_data.should_resize_to_largest_output = true;
|
||||
- resize_to_largest_output ();
|
||||
- } else if (wl_data.shell != NULL) {
|
||||
- wl_shell_surface_set_fullscreen (win_data.shell_surface,
|
||||
- WL_SHELL_SURFACE_FULLSCREEN_METHOD_SCALE,
|
||||
|
|
@ -54,6 +57,9 @@ index 7bdf075..08b0b21 100644
|
|||
- }
|
||||
+ if (wl_data.xdg_shell != NULL) {
|
||||
+ xdg_toplevel_set_fullscreen (win_data.xdg_toplevel, NULL);
|
||||
+ } else if (wl_data.fshell != NULL) {
|
||||
+ win_data.should_resize_to_largest_output = true;
|
||||
+ resize_to_largest_output ();
|
||||
+ } else if (wl_data.shell != NULL) {
|
||||
+ wl_shell_surface_set_fullscreen (win_data.shell_surface,
|
||||
+ WL_SHELL_SURFACE_FULLSCREEN_METHOD_SCALE,
|
||||
|
|
|
|||
|
|
@ -0,0 +1,10 @@
|
|||
require recipes-browser/cog/cog.inc
|
||||
require conf/include/devupstream.inc
|
||||
|
||||
SRC_URI = "https://wpewebkit.org/releases/${P}.tar.xz"
|
||||
SRC_URI[sha256sum] = "933adc74e7b2b7f879a0159b073aa601d58865621891c443d1c2481f9eee6c97"
|
||||
|
||||
SRC_URI_class-devupstream = "git://github.com/Igalia/cog.git;protocol=https;branch=cog-0.10"
|
||||
SRCREV_class-devupstream = "1e422e5055f72e9914341ce9535aaf375b821946"
|
||||
|
||||
DEPENDS += "wpewebkit (>= 2.30) wpebackend-fdo (>= 1.8)"
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
require recipes-browser/libwpe/libwpe.inc
|
||||
require conf/include/devupstream.inc
|
||||
|
||||
SRC_URI = "https://wpewebkit.org/releases//${BPN}-${PV}.tar.xz"
|
||||
SRC_URI[sha256sum] = "2415e270d45e3595ed4052bc105f733744dc2d3677e12ff4a831e5029841084d"
|
||||
|
||||
SRC_URI_class-devupstream = "git://github.com/WebPlatformForEmbedded/libwpe.git;protocol=https;branch=libwpe-1.10"
|
||||
SRCREV_class-devupstream = "55877263583716303a893945418ec23cffdfcbbf"
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
require recipes-browser/wpebackend-fdo/wpebackend-fdo.inc
|
||||
inherit meson
|
||||
|
||||
SRC_URI = "https://wpewebkit.org/releases/${BPN}-${PV}.tar.xz"
|
||||
SRC_URI[md5sum] = "5c2f7fab6623e0964bc0d1b4a01719f0"
|
||||
SRC_URI[sha1sum] = "d07fdfec0df53c57e3ed36a1efffecf30d1b418c"
|
||||
SRC_URI[sha256sum] = "fc5b388a91d6f2c22803e1a21a6759a314b4539e5169c6e272bfc953a05fbb85"
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
require recipes-browser/wpewebkit/wpewebkit.inc
|
||||
|
||||
SRC_URI = "https://wpewebkit.org/releases/${P}.tar.xz"
|
||||
SRC_URI[md5sum] = "1dd3f56b8eba16266166d757acb979fc"
|
||||
SRC_URI[sha1sum] = "c5b3a48d886375a6982dd2dc5c9cc2f92f5a9690"
|
||||
SRC_URI[sha256sum] = "7b6b39a12ccf3f84da4cc6ac59e02fbe328f7476eaeb9c23de9b9288c2c2f39c"
|
||||
|
||||
DEPENDS += "libwpe"
|
||||
RCONFLICTS_${PN} = "libwpe (< 1.8) wpebackend-fdo (< 1.8)"
|
||||
|
||||
LIC_FILES_CHKSUM = "file://Source/WebCore/LICENSE-LGPL-2.1;md5=a778a33ef338abbaf8b8a7c36b6eec80 "
|
||||
|
|
@ -377,9 +377,9 @@ check_swu_package() {
|
|||
|
||||
# Check software update package.
|
||||
if [ -f "${PUBLIC_KEY}" ]; then
|
||||
swupdate -c -v -i "${update_package}" -k "${PUBLIC_KEY}" > "${SWUPDATE_OUTPUT}"
|
||||
swupdate -c -v -i "${update_package}" -e "${SWUPDATE_IMAGE_SET}" -k "${PUBLIC_KEY}" > "${SWUPDATE_OUTPUT}"
|
||||
else
|
||||
swupdate -c -v -i "${update_package}" > "${SWUPDATE_OUTPUT}"
|
||||
swupdate -c -v -e "${SWUPDATE_IMAGE_SET}" -i "${update_package}" > "${SWUPDATE_OUTPUT}"
|
||||
fi
|
||||
|
||||
if [ "$?" != "0" ]; then
|
||||
|
|
@ -484,14 +484,15 @@ mount -t sysfs sysfs /sys
|
|||
mount -t devtmpfs devtmpfs /dev
|
||||
mount -t tmpfs tmpfs /tmp
|
||||
|
||||
# Give some time for the devices to settle down so mdev can mount all of them
|
||||
sleep 2
|
||||
|
||||
# Register mdev as device manager
|
||||
echo > /dev/mdev.seq
|
||||
echo > /dev/mdev.log
|
||||
mdev -d
|
||||
mdev -s
|
||||
|
||||
# Give some time for the devices to settle down so mdev can mount all of them
|
||||
sleep 2
|
||||
|
||||
# Run all shell scripts in postinstall folder
|
||||
run-parts /etc/*-postinsts
|
||||
|
||||
|
|
@ -572,6 +573,13 @@ for p in ${BLACKLISTED}; do
|
|||
encrypt_partitions=$(remove_entry "${encrypt_partitions}" "${p}")
|
||||
done
|
||||
|
||||
# Select update package image
|
||||
if [ "$(is_nand)" = "yes" ]; then
|
||||
SWUPDATE_IMAGE_SET="mtd,platform"
|
||||
else
|
||||
SWUPDATE_IMAGE_SET="mmc,platform"
|
||||
fi
|
||||
|
||||
# On eMMC, if the 'update' partition is encrypted, we need to mount it manually
|
||||
if [ "$(is_nand)" = "no" ] && contains "${ENC_PARTS}" "update"; then
|
||||
update_block="/dev/mmcblk0p$(fdisk -l /dev/mmcblk0 | sed -ne "s,^[^0-9]*\([0-9]\+\).*\<update\>.*,\1,g;T;p")"
|
||||
|
|
@ -804,9 +812,9 @@ if [ -n "${update_package_bool}" ]; then
|
|||
progress -wp &
|
||||
# Execute the software update.
|
||||
if [ -f "${PUBLIC_KEY}" ]; then
|
||||
swupdate -f "${SW_CONFIG}" -i "${update_package}" -k "${PUBLIC_KEY}"
|
||||
swupdate -e "${SWUPDATE_IMAGE_SET}" -f "${SW_CONFIG}" -i "${update_package}" -k "${PUBLIC_KEY}"
|
||||
else
|
||||
swupdate -f "${SW_CONFIG}" -i "${update_package}"
|
||||
swupdate -e "${SWUPDATE_IMAGE_SET}" -f "${SW_CONFIG}" -i "${update_package}"
|
||||
fi
|
||||
if [ "$?" = "0" ]; then
|
||||
log "Firmware update process succeed!"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,68 @@
|
|||
SUMMARY = "Python Library for Coral devices"
|
||||
DESCRIPTION = "Python Library to run inferences and perform on-device transfer learning with TensorFlow Lite models on Coral devices"
|
||||
SECTION = "devel/python"
|
||||
HOMEPAGE = "https://coral.ai/software/#pycoral-api"
|
||||
LICENSE = "Apache-2.0"
|
||||
LIC_FILES_CHKSUM = "file://${S}/pycoral-1.0.1.dist-info/LICENSE;md5=d8927f3331d2b3e321b7dd1925166d25"
|
||||
|
||||
PYTHON_PACKAGE = "pycoral-1.0.1-cp38-cp38-linux_aarch64.whl"
|
||||
|
||||
SRC_URI = "git://github.com/google-coral/pycoral.git;protocol=https"
|
||||
SRCREV = "d4b9f572fa3baef9d854483a171e02a6b3f9dbd0"
|
||||
|
||||
SRC_URI += "https://github.com/google-coral/pycoral/releases/download/v1.0.1/${PYTHON_PACKAGE};downloadfilename=${PYTHON_PACKAGE};subdir=${BP};name=python-wheel"
|
||||
SRC_URI[python-wheel.md5sum] = "ea89677a47d7d81d2558b8dbbae44d95"
|
||||
SRC_URI[python-wheel.sha256sum] = "894468447192fbcf946157db0f3b6424ece6d70bcec1243892d27cd7b521f176"
|
||||
|
||||
DEPENDS = "python3 python3-pip-native python3-wheel-native curl-native ca-certificates-native"
|
||||
|
||||
RDEPENDS_${PN} = "${PYTHON_PN} \
|
||||
${PYTHON_PN}-numpy \
|
||||
${PYTHON_PN}-pycairo \
|
||||
${PYTHON_PN}-pygobject \
|
||||
${PYTHON_PN}-pillow \
|
||||
libedgetpu \
|
||||
tensorflow-lite \
|
||||
"
|
||||
|
||||
inherit python3native
|
||||
|
||||
do_unpack[depends] += "unzip-native:do_populate_sysroot"
|
||||
|
||||
do_unpack_extra(){
|
||||
[ -d ${S} ] || mkdir -p ${S}
|
||||
cd ${S}
|
||||
unzip -q -o ${S}/${PYTHON_PACKAGE} -d ${S}
|
||||
}
|
||||
addtask unpack_extra after do_unpack before do_patch
|
||||
|
||||
|
||||
do_configure() {
|
||||
export CURL_CA_BUNDLE=${STAGING_DIR_NATIVE}/etc/ssl/certs/ca-certificates.crt
|
||||
|
||||
cd ${WORKDIR}/git
|
||||
bash examples/install_requirements.sh classify_image.py
|
||||
}
|
||||
|
||||
do_install() {
|
||||
# Install examples
|
||||
install -d ${D}/opt/pycoral
|
||||
install -m 0555 ${WORKDIR}/git/test_data/* ${D}/opt/pycoral
|
||||
install -m 0555 ${WORKDIR}/git/examples/classify_image.py ${D}/opt/pycoral
|
||||
|
||||
# Install pip package
|
||||
install -d ${D}/${PYTHON_SITEPACKAGES_DIR}
|
||||
${STAGING_BINDIR_NATIVE}/pip3 install --disable-pip-version-check -v \
|
||||
-t ${D}/${PYTHON_SITEPACKAGES_DIR} --no-cache-dir --no-deps \
|
||||
${WORKDIR}/${BP}/pycoral-*.whl
|
||||
}
|
||||
|
||||
FILES_${PN} += "\
|
||||
${libdir}/${PYTHON_DIR}/site-packages/* \
|
||||
/opt/pycoral/* \
|
||||
"
|
||||
|
||||
INSANE_SKIP_${PN} += "already-stripped"
|
||||
|
||||
COMPATIBLE_MACHINE = "(-)"
|
||||
COMPATIBLE_MACHINE_aarch64 = "(.*)"
|
||||
|
|
@ -0,0 +1,48 @@
|
|||
DESCRIPTION = "Open-source software for mathematics, science, and engineering. It includes modules for statistics, optimization, integration, linear algebra, Fourier transforms, signal and image processing, ODE solvers, and more."
|
||||
SECTION = "devel/python"
|
||||
HOMEPAGE = "https://www.scipy.org"
|
||||
LICENSE = "BSD-3-Clause"
|
||||
LIC_FILES_CHKSUM = "file://${S}/scipy-1.7.0.dist-info/LICENSE.txt;md5=caecddab96f03de0092b62333ea77f91"
|
||||
|
||||
PYTHON_PACKAGE = "scipy-1.7.0-cp38-cp38-manylinux_2_17_aarch64.manylinux2014_aarch64.whl"
|
||||
|
||||
SRC_URI = "https://files.pythonhosted.org/packages/d0/8d/3dbb59d78218b6a76f1ddb55db60ea5459fa7968655acb21252a59a10bc3/${PYTHON_PACKAGE};subdir=${BP}"
|
||||
SRC_URI[md5sum] = "e2e369078c6b7ca29c952cb9971bc154"
|
||||
SRC_URI[sha256sum] = "bd4399d4388ca0239a4825e312b3e61b60f743dd6daf49e5870837716502a92a"
|
||||
|
||||
DEPENDS = "python3 python3-pip-native python3-wheel-native"
|
||||
|
||||
RDEPENDS_${PN} = "${PYTHON_PN} \
|
||||
${PYTHON_PN}-numpy \
|
||||
"
|
||||
RPROVIDES_${PN} += "\
|
||||
libgfortran-daac5196.so.5.0.0(GFORTRAN_8)(64bit) \
|
||||
"
|
||||
|
||||
inherit python3native
|
||||
|
||||
do_unpack[depends] += "unzip-native:do_populate_sysroot"
|
||||
|
||||
do_unpack_extra(){
|
||||
[ -d ${S} ] || mkdir -p ${S}
|
||||
cd ${S}
|
||||
unzip -q -o ${S}/${PYTHON_PACKAGE} -d ${S}
|
||||
}
|
||||
addtask unpack_extra after do_unpack before do_patch
|
||||
|
||||
do_install() {
|
||||
# Install pip package
|
||||
install -d ${D}/${PYTHON_SITEPACKAGES_DIR}
|
||||
${STAGING_BINDIR_NATIVE}/pip3 install --disable-pip-version-check -v \
|
||||
-t ${D}/${PYTHON_SITEPACKAGES_DIR} --no-cache-dir --no-deps \
|
||||
${WORKDIR}/${BP}/scipy-*.whl
|
||||
}
|
||||
|
||||
FILES_${PN} += "\
|
||||
${libdir}/${PYTHON_DIR}/site-packages/* \
|
||||
"
|
||||
|
||||
INSANE_SKIP_${PN} += "already-stripped"
|
||||
|
||||
COMPATIBLE_MACHINE = "(-)"
|
||||
COMPATIBLE_MACHINE_aarch64 = "(.*)"
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
DESCRIPTION = "Python library to create SVG drawings"
|
||||
SECTION = "devel/python"
|
||||
HOMEPAGE = "https://github.com/mozman/svgwrite"
|
||||
LICENSE = "MIT"
|
||||
LIC_FILES_CHKSUM = "file://LICENSE.TXT;md5=3e14f2d1a8674ddcbbd8b51762250049"
|
||||
|
||||
inherit pypi setuptools3
|
||||
|
||||
PYPI_PACKAGE = "svgwrite"
|
||||
PYPI_PACKAGE_EXT = "zip"
|
||||
|
||||
SRC_URI[md5sum] = "6132f0d8611ac0d5a8a8731636aa03f8"
|
||||
SRC_URI[sha256sum] = "e220a4bf189e7e214a55e8a11421d152b5b6fb1dd660c86a8b6b61fe8cc2ac48"
|
||||
|
|
@ -1,20 +0,0 @@
|
|||
software =
|
||||
{
|
||||
version = "##SW_VERSION##";
|
||||
description = "##DESCRIPTION##";
|
||||
|
||||
images: (
|
||||
{
|
||||
filename = "##BOOTIMG_NAME##";
|
||||
volume = "##BOOT_DEV##";
|
||||
type = "ubivol";
|
||||
sha256 = "@##BOOTIMG_NAME##";
|
||||
},
|
||||
{
|
||||
filename = "##ROOTIMG_NAME##";
|
||||
volume = "##ROOTFS_DEV##";
|
||||
type = "ubivol";
|
||||
sha256 = "@##ROOTIMG_NAME##";
|
||||
}
|
||||
);
|
||||
}
|
||||
|
|
@ -3,6 +3,8 @@ software =
|
|||
version = "##SW_VERSION##";
|
||||
description = "##DESCRIPTION##";
|
||||
|
||||
mmc = {
|
||||
platform: {
|
||||
images: (
|
||||
{
|
||||
filename = "##BOOTIMG_NAME##";
|
||||
|
|
@ -16,8 +18,31 @@ software =
|
|||
device = "##ROOTFS_DEV##";
|
||||
type ="raw";
|
||||
sha256 = "@##ROOTIMG_NAME##";
|
||||
compressed = "zlib";
|
||||
installed-directly = true;
|
||||
}
|
||||
);
|
||||
##PREINSTALL_SCRIPT##
|
||||
}
|
||||
##PREINSTALL_SCRIPT##
|
||||
};
|
||||
mtd = {
|
||||
platform: {
|
||||
images: (
|
||||
{
|
||||
filename = "##BOOTIMG_NAME##";
|
||||
volume = "##BOOT_DEV##";
|
||||
type = "ubivol";
|
||||
sha256 = "@##BOOTIMG_NAME##";
|
||||
installed-directly = true;
|
||||
},
|
||||
{
|
||||
filename = "##ROOTIMG_NAME##";
|
||||
volume = "##ROOTFS_DEV##";
|
||||
type ="ubivol";
|
||||
sha256 = "@##ROOTIMG_NAME##";
|
||||
installed-directly = true;
|
||||
}
|
||||
);
|
||||
};
|
||||
};
|
||||
}
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@ DESCRIPTION = "${@oe.utils.ifelse(d.getVar('TRUSTFENCE_ENCRYPT_ROOTFS', True) ==
|
|||
|
||||
BOOTFS_EXT ?= ".boot.vfat"
|
||||
BOOTFS_EXT_ccimx6ul ?= ".boot.ubifs"
|
||||
ROOTFS_EXT ?= ".ext4"
|
||||
ROOTFS_EXT ?= ".ext4.gz"
|
||||
ROOTFS_EXT_ccimx6ul ?= ".ubifs"
|
||||
|
||||
BOOT_DEV_NAME ?= "/dev/mmcblk0p1"
|
||||
|
|
|
|||
|
|
@ -27,6 +27,8 @@ MACHINE_GSTREAMER_1_0_PKGS_ccimx6ul = " \
|
|||
gstreamer1.0-plugins-good-video4linux2 \
|
||||
gstreamer1.0-plugins-good-videofilter \
|
||||
gstreamer1.0-plugins-good-vpx \
|
||||
gstreamer1.0-plugins-good-avi \
|
||||
gstreamer1.0-plugins-good-jpeg \
|
||||
"
|
||||
|
||||
MACHINE_GSTREAMER_1_0_EXTRA_INSTALL ?= ""
|
||||
|
|
|
|||
Loading…
Reference in New Issue