Digi
/
meta-digi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

README: remove limitation 

This was fixed in U-Boot:
4aad9fd041f11de66bf5eb0137c49dbd450c4388

Also move TrustFence (TM) limitation which affect all platforms to a common section.

https://jira.digi.com/browse/DEL-3134

Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This commit is contained in:
Diaz de Grenu, Jose 2016-10-21 13:54:24 +02:00
parent 262ade8908
commit 2405428230
1 changed files with 7 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
README.md
View File

@ -97,6 +97,13 @@ Documentation is available online on the Digi documentation site:
This is a list of known issues and limitations at the time of release. An
updated list can be found on the online documentation.
* When using TrustFence (TM) encrypted images secure boot support, the CAAM
will hang the processor when trying to authenticate an encrypted firmware image
after a failed attempt. Hence the target needs to be reset after an
authentication failure.
* If TrustFence (TM) image encryption support is enabled, the uSD image will
boot a signed U-Boot only.
## Digi ConnectCore 6UL
* In the Bluetooth interface, the UART hardware flow control doesn’t work
@ -118,21 +125,11 @@ modes:
softAP mode
* A maximum of ten connected devices are supported when using Qualcomm's AR6233
Bluetooth Low Energy mode
* NXP i.MX6 processor does not set the sticky bit which write protects the
SRK_REVOKE eFuse on closed devices. This means that in the ConnectCore 6,
key revocation is always possible, no matter the value of the Yocto macro
TRUSTFENCE_UNLOCK_KEY_REVOCATION.
* When using TrustFence (TM) encrypted images secure boot support, the CAAM
will hang the processor when trying to authenticate an encrypted kernel image
after a failed attempt. Hence the target needs to be reset after an
authentication failure.
## Digi ConnectCore 6 SBC
* The Micrel PHY KSZ9031 may take between five and six seconds to
auto-negotiate with Gigabit switches
* If TrustFence (TM) image encryption support is enabled, the uSD image will
boot a signed U-Boot only.
# Support Contact Information