ccmp25: implement firmware deployment scripts
https://onedigi.atlassian.net/browse/DEL-9120 Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit is contained in:
Javier Viguera
parent
5ba3466c08
commit
2a9e657e0f
|
|
@ -7,9 +7,10 @@
|
|||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
setenv INSTALL_ATF_FILENAME tf-a-##MACHINE##-${module_ram}-emmc.stm32
|
||||
setenv INSTALL_FIP_FILENAME fip-##MACHINE##-${module_ram}-optee.bin
|
||||
setenv INSTALL_MMCDEV 1
|
||||
setenv INSTALL_ATF_FILENAME tf-a-##MACHINE##-emmc.stm32
|
||||
setenv INSTALL_METADATA_FILENAME metadata-##MACHINE##.bin
|
||||
setenv INSTALL_FIP_FILENAME fip-##MACHINE##-optee.bin
|
||||
setenv INSTALL_MMCDEV 2
|
||||
|
||||
if test -z "${image-name}"; then
|
||||
setenv image-name ##DEFAULT_IMAGE_NAME##
|
||||
|
|
@ -23,12 +24,12 @@ done
|
|||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.ubifs
|
||||
setenv INSTALL_RECOVERY_FILENAME ${BASEFILENAME}-##MACHINE##.recovery.ubifs
|
||||
setenv INSTALL_ROOTFS_FILENAME ${BASEFILENAME}-##MACHINE##.ubifs
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
setenv INSTALL_RECOVERY_FILENAME ${BASEFILENAME}-##MACHINE##.recovery.vfat
|
||||
setenv INSTALL_ROOTFS_FILENAME ${BASEFILENAME}-##MACHINE##.ext4
|
||||
|
||||
# Check for presence of firmware files on the SD card
|
||||
FILES="${INSTALL_ATF_FILENAME} ${INSTALL_FIP_FILENAME} ${INSTALL_LINUX_FILENAME}"
|
||||
FILES="${INSTALL_ATF_FILENAME} ${INSTALL_METADATA_FILENAME} ${INSTALL_FIP_FILENAME} ${INSTALL_LINUX_FILENAME}"
|
||||
if test "${dualboot}" != "yes"; then
|
||||
FILES="${FILES} ${INSTALL_RECOVERY_FILENAME}"
|
||||
fi
|
||||
|
|
@ -46,8 +47,6 @@ if test ! -e mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME}; then
|
|||
if test ! -e mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME}; then
|
||||
echo "ERROR: Could not find file ${INSTALL_ROOTFS_FILENAME}";
|
||||
install_abort=1;
|
||||
else
|
||||
setenv rootfstype squashfs
|
||||
fi
|
||||
fi
|
||||
if test "${install_abort}" = "1"; then
|
||||
|
|
@ -61,13 +60,15 @@ echo "############################################################"
|
|||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install the following files"
|
||||
echo " on the partitions of the NAND."
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " fsbl1 ${INSTALL_ATF_FILENAME}"
|
||||
echo " fsbl2 ${INSTALL_ATF_FILENAME}"
|
||||
echo " boot1 ${INSTALL_ATF_FILENAME}"
|
||||
echo " boot2 ${INSTALL_ATF_FILENAME}"
|
||||
echo " metadata1 ${INSTALL_METADATA_FILENAME}"
|
||||
echo " metadata2 ${INSTALL_METADATA_FILENAME}"
|
||||
echo " fip-a ${INSTALL_FIP_FILENAME}"
|
||||
echo " fip-b ${INSTALL_FIP_FILENAME}"
|
||||
if test "${dualboot}" = "yes"; then
|
||||
|
|
@ -101,22 +102,44 @@ setenv forced_update 1
|
|||
# the first reset.
|
||||
setenv bootdelay 0
|
||||
|
||||
# Update ATF and FIP images
|
||||
# Set target MMC device index to eMMC
|
||||
setenv mmcdev 0
|
||||
|
||||
# Update ATF, METADATA and FIP images
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing ATF boot loader image ${INSTALL_ATF_FILENAME}"
|
||||
echo ""
|
||||
echo ""
|
||||
update fsbl1 mmc ${INSTALL_MMCDEV} ${INSTALL_ATF_FILENAME}
|
||||
update boot1 mmc ${INSTALL_MMCDEV} ${INSTALL_ATF_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fsbl1!";
|
||||
echo "[ERROR] Failed to update boot1!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
update fsbl2 mmc ${INSTALL_MMCDEV} ${INSTALL_ATF_FILENAME}
|
||||
update boot2 mmc ${INSTALL_MMCDEV} ${INSTALL_ATF_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fsbl2!";
|
||||
echo "[ERROR] Failed to update boot2!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing METADATA boot loader image ${INSTALL_ATF_FILENAME}"
|
||||
echo ""
|
||||
echo ""
|
||||
update metadata1 mmc ${INSTALL_MMCDEV} ${INSTALL_METADATA_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update metadata1!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
update metadata2 mmc ${INSTALL_MMCDEV} ${INSTALL_METADATA_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update metadata2!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
|
|
@ -141,39 +164,45 @@ if test $? -eq 1; then
|
|||
exit;
|
||||
fi
|
||||
|
||||
# Check if uboot_config volume exists (U-Boot env)
|
||||
ubi part UBI
|
||||
ubi check uboot_config
|
||||
if test $? -eq 1; then
|
||||
# Create volumes layout (including U-Boot env)
|
||||
run ubivolscript;
|
||||
fi
|
||||
|
||||
# Set 'bootcmd' to the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Restore 'dualboot' if previously set
|
||||
# - Run 'ubivolscript' script to re-partition the UBI partition and save the
|
||||
# environment
|
||||
# - Save the environment
|
||||
# - Force on-the-fly updates to avoid possible verification errors
|
||||
# - Partition the eMMC user data area for Linux
|
||||
# - If Dual Boot
|
||||
# - Update the system partitions: linux_a, linux_b, rootfs_a, rootfs_b
|
||||
# - Set bootlimit to 3
|
||||
# - If Normal Boot:
|
||||
# - Update the system partitions: linux, recovery, rootfs
|
||||
# - Erase the 'update' partition
|
||||
# - Configure recovery to wipe 'update' partition
|
||||
# - Run 'recovery' and let the system boot after
|
||||
setenv bootcmd "
|
||||
env default -a;
|
||||
setenv dualboot ${dualboot};
|
||||
setenv rootfstype ${rootfstype};
|
||||
setenv install_dualboot ${install_dualboot};
|
||||
run ubivolscript;
|
||||
saveenv;
|
||||
setenv otf-update yes;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Creating Linux partition table on the eMMC\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
run partition_mmc_linux;
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
if test \"\$\{dualboot\}\" = yes; then
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_a\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux_a mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
update linux_a mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux_a!\";
|
||||
echo \"\";
|
||||
|
|
@ -186,7 +215,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_b\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux_b mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
update linux_b mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux_b!\";
|
||||
echo \"\";
|
||||
|
|
@ -199,7 +228,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_a\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs_a mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
update rootfs_a mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs_a partition!\";
|
||||
echo \"\";
|
||||
|
|
@ -212,7 +241,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_b\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs_b mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
update rootfs_b mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs_b partition!\";
|
||||
echo \"\";
|
||||
|
|
@ -227,7 +256,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
update linux mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux!\";
|
||||
echo \"\";
|
||||
|
|
@ -239,7 +268,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_RECOVERY_FILENAME} on recovery\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery mmc ${INSTALL_MMCDEV} ${INSTALL_RECOVERY_FILENAME} ${force_erase};
|
||||
update recovery mmc ${INSTALL_MMCDEV} ${INSTALL_RECOVERY_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update recovery partition!\";
|
||||
echo \"\";
|
||||
|
|
@ -251,7 +280,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
update rootfs mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||
echo \"\";
|
||||
|
|
@ -262,6 +291,7 @@ setenv bootcmd "
|
|||
setenv boot_recovery yes;
|
||||
setenv recovery_command wipe_update;
|
||||
fi;
|
||||
setenv otf-update;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
|
|
|
|||
|
|
@ -1,14 +1,15 @@
|
|||
#
|
||||
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||
# into the NAND
|
||||
# into the eMMC
|
||||
#
|
||||
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
setenv INSTALL_ATF_FILENAME tf-a-##MACHINE##-${module_ram}-nand.stm32
|
||||
setenv INSTALL_FIP_FILENAME fip-##MACHINE##-${module_ram}-optee.bin
|
||||
setenv INSTALL_ATF_FILENAME tf-a-##MACHINE##-emmc.stm32
|
||||
setenv INSTALL_METADATA_FILENAME metadata-##MACHINE##.bin
|
||||
setenv INSTALL_FIP_FILENAME fip-##MACHINE##-optee.bin
|
||||
setenv INSTALL_USBDEV 0
|
||||
|
||||
if test -z "${image-name}"; then
|
||||
|
|
@ -23,12 +24,12 @@ done
|
|||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.ubifs
|
||||
setenv INSTALL_RECOVERY_FILENAME ${BASEFILENAME}-##MACHINE##.recovery.ubifs
|
||||
setenv INSTALL_ROOTFS_FILENAME ${BASEFILENAME}-##MACHINE##.ubifs
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
setenv INSTALL_RECOVERY_FILENAME ${BASEFILENAME}-##MACHINE##.recovery.vfat
|
||||
setenv INSTALL_ROOTFS_FILENAME ${BASEFILENAME}-##MACHINE##.ext4
|
||||
|
||||
# Check for presence of firmware files on the USB
|
||||
FILES="${INSTALL_ATF_FILENAME} ${INSTALL_FIP_FILENAME} ${INSTALL_LINUX_FILENAME}"
|
||||
FILES="${INSTALL_ATF_FILENAME} ${INSTALL_METADATA_FILENAME} ${INSTALL_FIP_FILENAME} ${INSTALL_LINUX_FILENAME}"
|
||||
if test "${dualboot}" != "yes"; then
|
||||
FILES="${FILES} ${INSTALL_RECOVERY_FILENAME}"
|
||||
fi
|
||||
|
|
@ -46,11 +47,7 @@ if test ! -e usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME}; then
|
|||
if test ! -e usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME}; then
|
||||
echo "ERROR: Could not find file ${INSTALL_ROOTFS_FILENAME}";
|
||||
install_abort=1;
|
||||
else
|
||||
setenv rootfstype squashfs
|
||||
fi
|
||||
else
|
||||
setenv rootfstype
|
||||
fi
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "To install a different image, set variable 'image-name', e.g.:"
|
||||
|
|
@ -63,13 +60,15 @@ echo "############################################################"
|
|||
echo "# Linux firmware install from USB #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install the following files"
|
||||
echo " on the partitions of the NAND."
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " fsbl1 ${INSTALL_ATF_FILENAME}"
|
||||
echo " fsbl2 ${INSTALL_ATF_FILENAME}"
|
||||
echo " boot1 ${INSTALL_ATF_FILENAME}"
|
||||
echo " boot2 ${INSTALL_ATF_FILENAME}"
|
||||
echo " metadata1 ${INSTALL_METADATA_FILENAME}"
|
||||
echo " metadata2 ${INSTALL_METADATA_FILENAME}"
|
||||
echo " fip-a ${INSTALL_FIP_FILENAME}"
|
||||
echo " fip-b ${INSTALL_FIP_FILENAME}"
|
||||
if test "${dualboot}" = "yes"; then
|
||||
|
|
@ -103,22 +102,44 @@ setenv forced_update 1
|
|||
# the first reset.
|
||||
setenv bootdelay 0
|
||||
|
||||
# Update ATF and FIP images
|
||||
# Set target MMC device index to eMMC
|
||||
setenv mmcdev 0
|
||||
|
||||
# Update ATF, METADATA and FIP images
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing ATF boot loader image ${INSTALL_ATF_FILENAME}"
|
||||
echo ""
|
||||
echo ""
|
||||
update fsbl1 usb ${INSTALL_USBDEV} ${INSTALL_ATF_FILENAME}
|
||||
update boot1 usb ${INSTALL_USBDEV} ${INSTALL_ATF_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fsbl1!";
|
||||
echo "[ERROR] Failed to update boot1!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
update fsbl2 usb ${INSTALL_USBDEV} ${INSTALL_ATF_FILENAME}
|
||||
update boot2 usb ${INSTALL_USBDEV} ${INSTALL_ATF_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update fsbl2!";
|
||||
echo "[ERROR] Failed to update boot2!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing METADATA boot loader image ${INSTALL_ATF_FILENAME}"
|
||||
echo ""
|
||||
echo ""
|
||||
update metadata1 usb ${INSTALL_USBDEV} ${INSTALL_METADATA_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update metadata1!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
update metadata2 usb ${INSTALL_USBDEV} ${INSTALL_METADATA_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update metadata2!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
|
|
@ -143,32 +164,38 @@ if test $? -eq 1; then
|
|||
exit;
|
||||
fi
|
||||
|
||||
# Check if uboot_config volume exists (U-Boot env)
|
||||
ubi part UBI
|
||||
ubi check uboot_config
|
||||
if test $? -eq 1; then
|
||||
# Create volumes layout (including U-Boot env)
|
||||
run ubivolscript;
|
||||
fi
|
||||
|
||||
# Set 'bootcmd' to the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Restore 'dualboot' if previously set
|
||||
# - Run 'ubivolscript' script to re-partition the UBI partition and save the
|
||||
# environment
|
||||
# - Save the environment
|
||||
# - Force on-the-fly updates to avoid possible verification errors
|
||||
# - Partition the eMMC user data area for Linux
|
||||
# - If Dual Boot
|
||||
# - Update the system partitions: linux_a, linux_b, rootfs_a, rootfs_b
|
||||
# - Set bootlimit to 3
|
||||
# - If Normal Boot:
|
||||
# - Update the system partitions: linux, recovery, rootfs
|
||||
# - Erase the 'update' partition
|
||||
# - Configure recovery to wipe 'update' partition
|
||||
# - Run 'recovery' and let the system boot after
|
||||
setenv bootcmd "
|
||||
env default -a;
|
||||
setenv dualboot ${dualboot};
|
||||
setenv rootfstype ${rootfstype};
|
||||
setenv install_dualboot ${install_dualboot};
|
||||
run ubivolscript;
|
||||
saveenv;
|
||||
setenv otf-update yes;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Creating Linux partition table on the eMMC\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
run partition_mmc_linux;
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
usb start;
|
||||
if test \"\$\{dualboot\}\" = yes; then
|
||||
echo \"\";
|
||||
|
|
@ -176,7 +203,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_a\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux_a usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
update linux_a usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux_a!\";
|
||||
echo \"\";
|
||||
|
|
@ -189,7 +216,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux_b\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux_b usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
update linux_b usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux_b!\";
|
||||
echo \"\";
|
||||
|
|
@ -202,7 +229,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_a\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs_a usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
update rootfs_a usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs_a partition!\";
|
||||
echo \"\";
|
||||
|
|
@ -215,7 +242,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs_b\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs_b usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
update rootfs_b usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs_b partition!\";
|
||||
echo \"\";
|
||||
|
|
@ -230,7 +257,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_LINUX_FILENAME} on linux\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME} ${force_erase};
|
||||
update linux usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux!\";
|
||||
echo \"\";
|
||||
|
|
@ -242,7 +269,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_RECOVERY_FILENAME} on recovery\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery usb ${INSTALL_USBDEV} ${INSTALL_RECOVERY_FILENAME} ${force_erase};
|
||||
update recovery usb ${INSTALL_USBDEV} ${INSTALL_RECOVERY_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update recovery partition!\";
|
||||
echo \"\";
|
||||
|
|
@ -254,7 +281,7 @@ setenv bootcmd "
|
|||
echo \">> Installing file ${INSTALL_ROOTFS_FILENAME} on rootfs\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME} ${force_erase};
|
||||
update rootfs usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||
echo \"\";
|
||||
|
|
@ -265,6 +292,7 @@ setenv bootcmd "
|
|||
setenv boot_recovery yes;
|
||||
setenv recovery_command wipe_update;
|
||||
fi;
|
||||
setenv otf-update;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/bin/sh
|
||||
#===============================================================================
|
||||
#
|
||||
# Copyright (C) 2022-2024 by Digi International Inc.
|
||||
# Copyright (C) 2024 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -27,12 +27,6 @@ getenv()
|
|||
uuu -v fb: ucmd printenv "${1}" | sed -ne "s,^${1}=,,g;T;p"
|
||||
}
|
||||
|
||||
check_cmd()
|
||||
{
|
||||
uuu -v fb: acmd ${1} > /dev/null 2> /dev/null
|
||||
uuu -v fb: ucmd echo retval=\$? | sed -ne "s,^retval=,,g;T;p"
|
||||
}
|
||||
|
||||
show_usage()
|
||||
{
|
||||
echo "Usage: $0 [options]"
|
||||
|
|
@ -59,19 +53,21 @@ show_usage()
|
|||
# 1. partition
|
||||
# 2. file
|
||||
# 3. timeout (in ms)
|
||||
# Description:
|
||||
# - downloads image to RAM
|
||||
# - runs 'update' command from RAM
|
||||
part_update()
|
||||
{
|
||||
echo "\033[36m"
|
||||
echo "====================================================================================="
|
||||
echo "Updating '${1}' partition with file: ${2}"
|
||||
echo "====================================================================================="
|
||||
echo "\033[0m"
|
||||
printf "\033[36m\n"
|
||||
printf "=====================================================================================\n"
|
||||
printf "Updating '%s' partition with file: %s\n" "${1}" "${2}"
|
||||
printf "=====================================================================================\n"
|
||||
printf "\033[0m\n"
|
||||
|
||||
uuu fb: download -f "${2}"
|
||||
uuu "fb[-t ${3}]:" ucmd update "${1}" ram \${fastboot_buffer} \${filesize} ${ERASE}
|
||||
if echo "${1}" | grep -qs "^boot[0-9]$"; then
|
||||
uuu "fb[-t ${3}]:" flash "${1}" "${2}"
|
||||
elif echo "${2}" | grep -qs "\.gz$"; then
|
||||
uuu "fb[-t ${3}]:" flash -raw2sparse "${1}" "${2}/*"
|
||||
else
|
||||
uuu "fb[-t ${3}]:" flash -raw2sparse "${1}" "${2}"
|
||||
fi
|
||||
}
|
||||
|
||||
clear
|
||||
|
|
@ -84,7 +80,7 @@ echo "############################################################"
|
|||
# -b, -d, -n (booleans)
|
||||
# -f <fip-filename>
|
||||
# -i <image-name>
|
||||
while getopts 'a:bdf:hi:n' c
|
||||
while getopts 'a:bdf:hi:nt' c
|
||||
do
|
||||
case $c in
|
||||
a) INSTALL_ATF_FILENAME=${OPTARG} ;;
|
||||
|
|
@ -107,35 +103,23 @@ if [ "${dualboot}" = "yes" ]; then
|
|||
DUALBOOT=true;
|
||||
fi
|
||||
|
||||
# Check if uboot_config volume exists (U-Boot env)
|
||||
uuu "fb[-t 15000]:" ucmd ubi part UBI
|
||||
check=$(check_cmd "ubi check uboot_config")
|
||||
if [ "${check}" = "1" ]; then
|
||||
RUNVOLS=true
|
||||
fi
|
||||
|
||||
# Check module_ram variable exists
|
||||
module_ram=$(getenv "module_ram")
|
||||
if [ -z "${module_ram}" ]; then
|
||||
module_ram="512MB" # Default variant
|
||||
fi
|
||||
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
echo ""
|
||||
echo "Determining image files to use..."
|
||||
|
||||
# Determine ATF file to program
|
||||
if [ -z "${INSTALL_ATF_FILENAME}" ]; then
|
||||
INSTALL_ATF_FILENAME="tf-a-##MACHINE##-${module_ram}-nand.stm32##SIGNED_TFA##"
|
||||
INSTALL_ATF_FILENAME="tf-a-##MACHINE##-emmc.stm32##SIGNED_TFA##"
|
||||
fi
|
||||
INSTALL_METADATA_FILENAME="metadata-##MACHINE##.bin"
|
||||
|
||||
# Determine FIP file to program
|
||||
if [ -z "${INSTALL_FIP_FILENAME}" ]; then
|
||||
INSTALL_FIP_FILENAME="fip-##MACHINE##-${module_ram}-optee##SIGNED##.bin"
|
||||
INSTALL_FIP_FILENAME="fip-##MACHINE##-optee##SIGNED##.bin"
|
||||
fi
|
||||
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
# Determine linux, recovery, and rootfs image filenames to update
|
||||
if [ -z "${IMAGE_NAME}" ]; then
|
||||
IMAGE_NAME="##DEFAULT_IMAGE_NAME##"
|
||||
|
|
@ -149,34 +133,34 @@ done
|
|||
if [ -z "${BASEFILENAME}" ]; then
|
||||
BASEFILENAME="${IMAGE_NAME}"
|
||||
fi
|
||||
INSTALL_LINUX_FILENAME="${BASEFILENAME}-##MACHINE##.boot.ubifs"
|
||||
INSTALL_RECOVERY_FILENAME="${BASEFILENAME}-##MACHINE##.recovery.ubifs"
|
||||
INSTALL_ROOTFS_FILENAME="${BASEFILENAME}-##MACHINE##.ubifs"
|
||||
INSTALL_LINUX_FILENAME="${BASEFILENAME}-##MACHINE##.boot.vfat"
|
||||
INSTALL_RECOVERY_FILENAME="${BASEFILENAME}-##MACHINE##.recovery.vfat"
|
||||
|
||||
# Verify existence of files before starting the update
|
||||
FILES="${INSTALL_ATF_FILENAME} ${INSTALL_FIP_FILENAME} ${INSTALL_LINUX_FILENAME}"
|
||||
FILES="${INSTALL_ATF_FILENAME} ${INSTALL_METADATA_FILENAME} ${INSTALL_FIP_FILENAME} ${INSTALL_LINUX_FILENAME}"
|
||||
if [ "${DUALBOOT}" != true ]; then
|
||||
FILES="${FILES} ${INSTALL_RECOVERY_FILENAME}"
|
||||
fi
|
||||
|
||||
for f in ${FILES}; do
|
||||
if [ ! -f ${f} ]; then
|
||||
echo "\033[31m[ERROR] Could not find file '${f}'\033[0m"
|
||||
if [ ! -f "${f}" ]; then
|
||||
printf "\033[31m[ERROR] Could not find file '%s'\033[0m\n" "${f}"
|
||||
ABORT=true
|
||||
fi
|
||||
done;
|
||||
|
||||
# Verify what kind of rootfs is going to be programmed
|
||||
if [ ! -f ${INSTALL_ROOTFS_FILENAME} ]; then
|
||||
echo "\033[31m[ERROR] Could not find file '${INSTALL_ROOTFS_FILENAME}'\033[0m"
|
||||
INSTALL_ROOTFS_FILENAME="${BASEFILENAME}-##MACHINE##.squashfs"
|
||||
echo "\033[32m[INFO] Trying with file '${INSTALL_ROOTFS_FILENAME}'\033[0m"
|
||||
if [ -f "${INSTALL_ROOTFS_FILENAME}" ]; then
|
||||
SQUASHFS=true
|
||||
else
|
||||
echo "\033[31m[ERROR] Could not find file '${INSTALL_ROOTFS_FILENAME}'\033[0m"
|
||||
ABORT=true
|
||||
fi
|
||||
ROOTFS_FILENAME="${BASEFILENAME}-##MACHINE##.ext4"
|
||||
ROOTFS_FILENAME_GZ="${ROOTFS_FILENAME}.gz"
|
||||
ROOTFS_FILENAME_SQFS="${BASEFILENAME}-##MACHINE##.squashfs"
|
||||
if [ -f "${ROOTFS_FILENAME_GZ}" ]; then
|
||||
INSTALL_ROOTFS_FILENAME="${ROOTFS_FILENAME_GZ}"
|
||||
elif [ -f "${ROOTFS_FILENAME}" ]; then
|
||||
INSTALL_ROOTFS_FILENAME="${ROOTFS_FILENAME}"
|
||||
elif [ -f "${ROOTFS_FILENAME_SQFS}" ]; then
|
||||
INSTALL_ROOTFS_FILENAME="${ROOTFS_FILENAME_SQFS}"
|
||||
else
|
||||
printf "\033[31m[ERROR] Could not find any rootfs image\033[0m\n"
|
||||
ABORT=true
|
||||
fi
|
||||
|
||||
[ "${ABORT}" = true ] && exit 1
|
||||
|
|
@ -197,28 +181,30 @@ if [ "${NOWAIT}" != true ]; then
|
|||
printf " ====================\n"
|
||||
printf " = IMPORTANT! =\n"
|
||||
printf " ====================\n"
|
||||
printf " This process will erase your NAND and will install the following files\n"
|
||||
printf " on the partitions of the NAND.\n"
|
||||
printf " This process will erase your eMMC and will install the following files\n"
|
||||
printf " on the partitions of the eMMC.\n"
|
||||
printf "\n"
|
||||
printf " PARTITION\tFILENAME\n"
|
||||
printf " ---------\t--------\n"
|
||||
printf " fsbl1\t${INSTALL_ATF_FILENAME}\n"
|
||||
printf " fsbl2\t${INSTALL_ATF_FILENAME}\n"
|
||||
printf " fip-a\t${INSTALL_FIP_FILENAME}\n"
|
||||
printf " fip-b\t${INSTALL_FIP_FILENAME}\n"
|
||||
printf " boot1\t%s\n" "${INSTALL_ATF_FILENAME}"
|
||||
printf " boot2\t%s\n" "${INSTALL_ATF_FILENAME}"
|
||||
printf " metadata1\t%s\n" "${INSTALL_METADATA_FILENAME}"
|
||||
printf " metadata2\t%s\n" "${INSTALL_METADATA_FILENAME}"
|
||||
printf " fip-a\t%s\n" "${INSTALL_FIP_FILENAME}"
|
||||
printf " fip-b\t%s\n" "${INSTALL_FIP_FILENAME}"
|
||||
if [ "${DUALBOOT}" = true ]; then
|
||||
printf " ${LINUX_NAME}_a\t${INSTALL_LINUX_FILENAME}\n"
|
||||
printf " %s_a\t%s\n" "${LINUX_NAME}" "${INSTALL_LINUX_FILENAME}"
|
||||
if [ "${INSTALL_DUALBOOT}" = true ]; then
|
||||
printf " ${LINUX_NAME}_b\t${INSTALL_LINUX_FILENAME}\n"
|
||||
printf " %s_b\t%s\n" "${LINUX_NAME}" "${INSTALL_LINUX_FILENAME}"
|
||||
fi
|
||||
printf " ${ROOTFS_NAME}_a\t${INSTALL_ROOTFS_FILENAME}\n"
|
||||
printf " %s_a\t%s\n" "${ROOTFS_NAME}" "${INSTALL_ROOTFS_FILENAME}"
|
||||
if [ "${INSTALL_DUALBOOT}" = true ]; then
|
||||
printf " ${ROOTFS_NAME}_b\t${INSTALL_ROOTFS_FILENAME}\n"
|
||||
printf " %s_b\t%s\n" "${ROOTFS_NAME}" "${INSTALL_ROOTFS_FILENAME}"
|
||||
fi
|
||||
else
|
||||
printf " ${LINUX_NAME}\t${INSTALL_LINUX_FILENAME}\n"
|
||||
printf " ${RECOVERY_NAME}\t${INSTALL_RECOVERY_FILENAME}\n"
|
||||
printf " ${ROOTFS_NAME}\t${INSTALL_ROOTFS_FILENAME}\n"
|
||||
printf " %s\t%s\n" "${LINUX_NAME}" "${INSTALL_LINUX_FILENAME}"
|
||||
printf " %s\t%s\n" "${RECOVERY_NAME}" "${INSTALL_RECOVERY_FILENAME}"
|
||||
printf " %s\t%s\n" "${ROOTFS_NAME}" "${INSTALL_ROOTFS_FILENAME}"
|
||||
fi
|
||||
printf "\n"
|
||||
printf " Press CTRL+C now if you wish to abort.\n"
|
||||
|
|
@ -226,32 +212,27 @@ if [ "${NOWAIT}" != true ]; then
|
|||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
WAIT="$((WAIT - 1))"
|
||||
done
|
||||
printf "\r \n"
|
||||
printf " Starting update process\n"
|
||||
fi
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
uuu fb: ucmd setenv forced_update 1
|
||||
|
||||
# Update ATF
|
||||
part_update "fsbl1" "${INSTALL_ATF_FILENAME}" 5000
|
||||
part_update "fsbl2" "${INSTALL_ATF_FILENAME}" 5000
|
||||
part_update "boot1" "${INSTALL_ATF_FILENAME}" 5000
|
||||
part_update "boot2" "${INSTALL_ATF_FILENAME}" 5000
|
||||
|
||||
# Update metadata
|
||||
part_update "metadata1" "${INSTALL_METADATA_FILENAME}" 5000
|
||||
part_update "metadata2" "${INSTALL_METADATA_FILENAME}" 5000
|
||||
|
||||
# Update FIP
|
||||
part_update "fip-a" "${INSTALL_FIP_FILENAME}" 5000
|
||||
part_update "fip-b" "${INSTALL_FIP_FILENAME}" 5000
|
||||
|
||||
# Environment volume does not exist and needs to be created
|
||||
if [ "${RUNVOLS}" = true ]; then
|
||||
# Create UBI volumes
|
||||
uuu "fb[-t 45000]:" ucmd run ubivolscript
|
||||
fi
|
||||
|
||||
# Set 'bootcmd' for the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Keep the 'dualboot' status
|
||||
|
|
@ -266,12 +247,24 @@ uuu fb: ucmd setenv bootcmd "
|
|||
bootcount reset;
|
||||
${bootlimit_cmd};
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Creating Linux partition table on the eMMC\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
run partition_mmc_linux;
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Start installation Linux firmware files\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux firmware\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
fastboot 0;
|
||||
"
|
||||
|
||||
|
|
@ -279,13 +272,11 @@ uuu fb: ucmd saveenv
|
|||
uuu fb: acmd reset
|
||||
|
||||
# Wait for the target to reset
|
||||
sleep 8
|
||||
sleep 3
|
||||
|
||||
# Set fastboot buffer address to $loadaddr
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
# Create UBI volumes
|
||||
uuu "fb[-t 45000]:" ucmd run ubivolscript
|
||||
# Restart fastboot with the latest MMC partition configuration
|
||||
uuu fb: ucmd setenv fastboot_dev sata
|
||||
uuu fb: ucmd setenv fastboot_dev mmc
|
||||
|
||||
if [ "${DUALBOOT}" = true ]; then
|
||||
# Update Linux A
|
||||
|
|
@ -315,25 +306,20 @@ else
|
|||
fi
|
||||
|
||||
# Set the dboot_kernel_var to fitimage if Trustfence is enabled
|
||||
if [ "${TRUSTFENCE}" = "true" ] || echo "$INSTALL_UBOOT_FILENAME" | grep -q -e "signed"; then
|
||||
if [ "${TRUSTFENCE}" = "true" ] || echo "${INSTALL_UBOOT_FILENAME}" | grep -q -e "signed"; then
|
||||
uuu fb: ucmd setenv dboot_kernel_var fitimage
|
||||
uuu fb: ucmd saveenv
|
||||
fi
|
||||
# Set the rootfstype if squashfs
|
||||
if [ "${SQUASHFS}" = true ]; then
|
||||
uuu fb: ucmd setenv rootfstype squashfs
|
||||
uuu fb: ucmd saveenv
|
||||
fi
|
||||
|
||||
# Reset the bootcount
|
||||
uuu fb: ucmd bootcount reset
|
||||
uuu fb: acmd bootcount reset
|
||||
# Reset the target
|
||||
uuu fb: acmd reset
|
||||
|
||||
echo "\033[32m"
|
||||
echo "============================================================="
|
||||
echo "Done! Wait for the target to complete first boot process."
|
||||
echo "============================================================="
|
||||
echo "\033[0m"
|
||||
printf "\033[32m\n"
|
||||
printf "=============================================================\n"
|
||||
printf "Done! Wait for the target to complete first boot process.\n"
|
||||
printf "=============================================================\n"
|
||||
printf "\033[0m\n"
|
||||
|
||||
exit
|
||||
|
|
|
|||
Loading…
Reference in New Issue