global: add Upstream-Status tag to all patches

This avoids a QA error that is triggered if a patch is missing said tag

https://onedigi.atlassian.net/browse/DEL-9011

Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-graphics/wayland/wayland-protocols/0001-linux-dmabuf-Add-support-for-YUV-Full-color-range.patch

@@ -8,6 +8,8 @@ YUV components color range.
 If set, components are in full color range.
 If not set, components are in limited color range.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Change-Id: Id4589f050d83d00298a834c444b01a13365ae6f2
 Signed-off-by: Mickael Reulier <mickael.reulier@st.com>
 ---

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-graphics/wayland/weston/0001-Allow-to-get-hdmi-output-with-several-outputs.patch

@@ -9,6 +9,8 @@ If an ouput fail to be attach or enable then this output must be only
 destroyed and an error doesn't be re which detach & destroy
 all other output.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
 ---
  compositor/main.c | 8 +++++++-

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-graphics/wayland/weston/0002-Force-to-close-all-output.patch

@@ -8,6 +8,8 @@ Content-Transfer-Encoding: 8bit
 In case of plug/unplug HMDI, it's necessary to close all output enabled.
 Without this patch, weston is stuck on DSI output.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
 ---
  compositor/main.c | 6 +++++-

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-graphics/wayland/weston/0004-Disable-request-to-EGL_DRM_RENDER_NODE_FILE_EXT.patch

@@ -5,6 +5,8 @@ Subject: [PATCH 4/4] Disable request to EGL_DRM_RENDER_NODE_FILE_EXT
 Depending on GPU userland implementationn the reqest of EGL_DRM_RENDER_NODE_FILE_EXT
 return /dev/dri/renderD128 but this interface are not always present.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
 ---
  libweston/renderer-gl/egl-glue.c | 6 +++---

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-graphics/wayland/weston/0005-clients-simple-egl-call-eglSwapInterval-after-eglMak.patch

@@ -9,6 +9,8 @@ eglSwapInterval call to have no effect. To fix this, wait until the
 EGLContext has been made current in init_gl before updating the swap
 interval.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
 ---
  clients/simple-egl.c | 6 +++---

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-graphics/wayland/weston/0006-Revert-libweston-libinput-device-Enable-Set-pointer-.patch

@@ -9,6 +9,8 @@ This commit will cause waylandsink cannot register pointer seat.
 As a result, mouse cannot move waylandsink window
 
 (cherry picked from commit 3f8f336b5d2cf7ea7aa4e047d669d093fc46dfe6)
+
+Upstream-Status: Inappropriate [digi specific]
 ---
  libweston/libinput-device.c | 29 +++++------------------------
  1 file changed, 5 insertions(+), 24 deletions(-)

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-libav/0001-gstreamer1.0-libav-disable-decoder-direct-rendering-.patch

@@ -12,6 +12,8 @@ and virtual memory path.
 This fix is required to reach 30fps on display driver side
 with 30fps VGA video content.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  ext/libav/gstavviddec.c | 2 +-

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0001-waylandsink-add-dmabuf-bufferpool.patch

@@ -8,6 +8,8 @@ drm/kms kernel driver ioctl DRM_IOCTL_MODE_CREATE_DUMB.
 This pool is selected if video/x-raw(memory:DMABuf)
 is set in caps.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Change-Id: I0507752a1a64ee2c657b73d8c802c44fd707f49f
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0002-waylandsink-fix-error-when-mmapping-dmabuf-buffers.patch

@@ -7,6 +7,8 @@ Linux Kernel 4.10 DRM/KMS requires DRM_RDWR rights
 in addition to DRM_CLOEXEC (see drmPrimeHandleToFD())
 in order to mmap in RD/WR.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Change-Id: I9c26642a47e6f71b56c0a4ad4714a5b85d814e5f
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0003-waylandsink-fix-wrong-width-when-creating-dmabuf-dum.patch

@@ -6,6 +6,8 @@ Subject: [PATCH 03/14] waylandsink: fix wrong width when creating dmabuf dumb
 
 Unaligned width is given in argument of create_dumb(), fix this.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Change-Id: Ifc57aa24331f58f588aae480baa2099a47d5f31b
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0004-waylandsink-do-not-hardcode-dmabuf-bufferpool-info-s.patch

@@ -7,6 +7,8 @@ Subject: [PATCH 04/14] waylandsink: do not hardcode dmabuf bufferpool info
 Read pool config to get the maximum number of buffers
 for info size pool allocation.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  ext/wayland/waylandpool.c | 12 +++++++++++-

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0005-waylandsink-increase-max-buffers-to-32-to-enable-dma.patch

@@ -7,6 +7,8 @@ Subject: [PATCH 05/14] waylandsink: increase max buffers to 32 to enable
 libav software decoders requires max buffers in pool config to be
 at least 32, otherwise this pool is rejected.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Change-Id: If1a54ee8c1a9f320fd91537e8e2082c4a7a78700
 ---
  ext/wayland/gstwaylandsink.c | 8 ++++++--

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0006-waylandsink-always-select-dmabuf-buffer-pool.patch

@@ -9,6 +9,8 @@ This allows 0-copy path with software downstream elements
 (use of dmabuf buffers mmapped memory directly instead
 of copying).
 
+Upstream-Status: Inappropriate [digi specific]
+
 Change-Id: Icb6e8ff272c562e829bb3ff91150e7d77b25dfd1
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0007-waylandsink-do-not-destroy-pool-twice.patch

@@ -7,6 +7,8 @@ Fix segfault in wayland client due to pool
 destroy being called with null pool...
 This problem was encountered with GStreamer-1.14.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  ext/wayland/waylandpool.c | 5 +++++

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0008-waylandsink-HACK-disable-frame-dropping-while-redraw.patch

@@ -18,6 +18,8 @@ Even if not observed yet, there is a risk of visible decoding artefacts
 due to the fact that downstream elements could rewrite in a frame
 being currently rendered by display subsystem...
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  ext/wayland/gstwaylandsink.c | 19 +++++++++++++++++++

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0009-waylandsink-Uprank-to-secondary.patch

@@ -3,6 +3,8 @@ From: Christophe Priouzeau <christophe.priouzeau@st.com>
 Date: Mon, 21 May 2018 14:26:47 +0200
 Subject: [PATCH 09/14] waylandsink: Uprank to secondary
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
 ---
  ext/wayland/gstwaylandsink.c | 2 +-

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0010-waylandsink-set-video-alignment-to-32-bytes.patch

@@ -5,6 +5,8 @@ Subject: [PATCH 10/14] waylandsink: set video alignment to 32 bytes
 
 Display subsystem requires at least 32 bytes alignment.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  ext/wayland/waylandpool.c | 7 ++++++-

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0011-waylandsink-fallback-to-shm-if-display-does-not-supp.patch

@@ -6,6 +6,8 @@ Subject: [PATCH 11/14] waylandsink: fallback to shm if display does not
 
 Fallback to shm if display does not support dmabuf.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  ext/wayland/gstwaylandsink.c | 10 +++-------

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0012-waylandsink-XDG-protocol-does-not-work-in-fullscreen.patch

@@ -8,6 +8,8 @@ fullscreen support.
 This patch avoids to over commit surface during configuration and takes
 into account render region when provided within wayland callback.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
 ---
  ext/wayland/wlwindow.c | 19 +++++++++++++++----

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0013-waylandsink-silently-drop-erroneous-frame.patch

@@ -9,6 +9,8 @@ file descriptor to wayland backend (which may crash on fatal error)
 - if file descriptors are not valid, do not fall into general
 "GST_ELEMENT_ERROR" nor return FLOW_ERROR.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  ext/wayland/gstwaylandsink.c |  6 +++---

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0014-waylandsink-add-waylandpool-on-meson-build.patch

@@ -3,6 +3,8 @@ From: Christophe Priouzeau <christophe.priouzeau@st.com>
 Date: Tue, 18 Feb 2020 13:33:21 +0100
 Subject: [PATCH 14/14] waylandsink add waylandpool on meson build
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
 ---
  ext/wayland/meson.build | 3 ++-

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0016-Add-new-gtkwaylandsink-element.patch

@@ -3,6 +3,7 @@ From: George Kiagiadakis <george.kiagiadakis@collabora.com>
 Date: Fri, 17 Dec 2021 14:02:51 +0200
 Subject: [PATCH 16/16] Add new gtkwaylandsink element
 
+Upstream-Status: Inappropriate [digi specific]
 ---
  ext/gtk/gstgtkutils.c         |  71 +++++
  ext/gtk/gstgtkutils.h         |  29 ++

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad/0017-waylandsink-fix-shm-pool-wrongly-selected-with-some-.patch

@@ -15,6 +15,8 @@ gst-launch-1.0 filesrc location=<png> ! pngdec ! videoconvert ! imagefreeze ! wa
 Problem is not reproduced with this pipeline:
 gst-launch-1.0 filesrc location=<png> ! pngdec ! imagefreeze ! videoconvert ! waylandsink
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  ext/wayland/gstwaylandsink.c | 14 +++++++++++++-

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/0001-playbin2-disable-any-default-video-processing.patch

@@ -6,6 +6,8 @@ Subject: [PATCH 1/2] playbin2: disable any default video processing
 Do not enable by default software video processing
 to not degrade performances.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  gst/playback/gstplaybin2.c | 5 ++---

meta-digi-arm/dynamic-layers/stm-st-stm32mp/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/0002-playbin3-disable-any-default-video-processing.patch

@@ -6,6 +6,8 @@ Subject: [PATCH 2/2] playbin3: disable any default video processing
 Do not enable by default software video processing
 to not degrade performances.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
 ---
  gst/playback/gstplaybin3.c | 5 ++---

meta-digi-arm/dynamic-layers/wolfssl/recipes-examples/wolfcrypt/wolfcrypttest/0001-wolfcrypttest-fix-for-FIPS-enabled-wolfSSL-library.patch

@@ -4,6 +4,8 @@ Subject: [PATCH] wolfcrypttest: fix for FIPS enabled wolfSSL library
 
 FIPS does not support MD5
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Javier Viguera <javier.viguera@digi.com>
 ---
  test.c | 6 ++++++

meta-digi-arm/recipes-bsp/libedgetpu/files/0001-gstreamer-fix-video-sink-for-wayland-images.patch

@@ -2,6 +2,8 @@ From: Arturo Buzarra <arturo.buzarra@digi.com>
 Date: Mon, 28 Jun 2021 15:00:58 +0200
 Subject: [PATCH] gstreamer: fix video sink for wayland images
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
 ---
  gstreamer/gstreamer.py | 2 +-

meta-digi-arm/recipes-bsp/libubootenv/libubootenv/0001-Implement-U-Boot-environment-access-functions.patch

@@ -6,6 +6,8 @@ Keep the same function signatures as u-boot-fw-utils, so that all code making
 use of this functionality remains compatible. Use the libubootenv
 implementation of the fw_printenv and fw_setenv apps as reference.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-7410
 
 Signed-off-by: Javier Viguera <javier.viguera@digi.com>

meta-digi-arm/recipes-bsp/libubootenv/libubootenv/0002-tools-env-add-support-to-set-dynamic-location-of-env.patch

@@ -15,6 +15,8 @@ area, like in this example:
   /dev/mtd1        0x0      0x20000    0x20000       8
   /dev/mtd1        0x0      0x20000    0x20000       8
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DUB-741
 https://jira.digi.com/browse/DEL-7410
 

meta-digi-arm/recipes-bsp/libubootenv/libubootenv/0003-Implement-support-for-environment-encryption-by-CAAM.patch

@@ -7,6 +7,8 @@ based on the u-boot-fw-utils implementation of the CAAM encryption support.
 
 Port a subset of U-Boot's md5 implementation.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-7410
 https://jira.digi.com/browse/DEL-7185
 https://jira.digi.com/browse/DEL-2836

meta-digi-arm/recipes-bsp/libubootenv/libubootenv/0004-Implement-support-for-environment-encryption-using-O.patch

@@ -2,6 +2,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Fri, 26 May 2023 11:21:43 +0200
 Subject: [PATCH] Implement support for environment encryption using Optee
 
+Upstream-Status: Inappropriate [digi specific]
+
 Co-authored-by: Javier Viguera <javier.viguera@digi.com>
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 Signed-off-by: Javier Viguera <javier.viguera@digi.com>

meta-digi-arm/recipes-bsp/trustfence-cst/trustfence-cst-3.3.2/0001-gen_auth_encrypted_data-reuse-existing-DEK-file.patch

@@ -8,6 +8,8 @@ needed to allow the CST to reuse an existing DEK file.
 Previous to this patch, the DEK is generated on the fly and placed on the
 specified path. After this patch, the DEK is taken from the specified path.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DUB-608
 
 Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>

meta-digi-arm/recipes-bsp/trustfence-cst/trustfence-cst-3.3.2/0002-openssl_helper-use-dev-urandom-as-seed-source.patch

@@ -4,6 +4,8 @@ Subject: [PATCH] openssl_helper: use /dev/urandom as seed source
 
 This is needed in order to avoid indefinitely blocking.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
 ---
  code/cst/code/common/src/openssl_helper.c | 2 +-

meta-digi-arm/recipes-bsp/trustfence-cst/trustfence-cst-3.3.2/0003-hab4_pki_tree.sh-adapt-script-for-DEY.patch

@@ -11,6 +11,8 @@ Subject: [PATCH] hab4_pki_tree.sh: adapt script for DEY
 * extract public keys from certificates: the public key needs to be
   available on the rootfs so that signed SWU packages can be authenticated.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Co-Authored-By: Javier Viguera <javier.viguera@digi.com>
 Co-Authored-By: Hector Palacios <hector.palacios@digi.com>
 Co-Authored-By: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>

meta-digi-arm/recipes-bsp/trustfence-cst/trustfence-cst-3.3.2/0004-ahab_pki_tree.sh-adapt-script-for-DEY.patch

@@ -11,6 +11,8 @@ Subject: [PATCH] ahab_pki_tree.sh: adapt script for DEY
 * extract public keys from certificates: the public key needs to be
   available on the rootfs so that signed SWU packages can be authenticated.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Co-Authored-By: Javier Viguera <javier.viguera@digi.com>
 Co-Authored-By: Hector Palacios <hector.palacios@digi.com>
 Co-Authored-By: Mike Engel <Mike.Engel@digi.com>

meta-digi-arm/recipes-digi/cryptoauthlib/cryptoauthlib/0001-lib-add-parameters-to-be-able-to-modify-default-I2C-.patch

@@ -3,6 +3,8 @@ Date: Thu, 31 Oct 2019 11:49:06 +0100
 Subject: [PATCH 1/6] lib: add parameters to be able to modify default I2C bus
  index and speed
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-6826
 
 Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>

meta-digi-arm/recipes-digi/cryptoauthlib/cryptoauthlib/0002-lib-apply-library-version-number-to-CMake-VERSION-pr.patch

@@ -8,6 +8,8 @@ additional symlink without it. This avoids bitbake errors that appear when
 creating *-dev packages, as Yocto development packages should only include
 the soname symlinks instead of the actual library file.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-6826
 
 Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>

meta-digi-arm/recipes-digi/cryptoauthlib/cryptoauthlib/0003-pkcs11-rename-template-configuration-file-to-its-int.patch

@@ -6,6 +6,8 @@ Subject: [PATCH 3/6] pkcs11: rename template configuration file to its
 Otherwise, users will need to manually rename the file in the rootfs to use
 the pkcs11 feature.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-6835
 
 Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>

meta-digi-arm/recipes-digi/cryptoauthlib/cryptoauthlib/0004-lib-install-pkg-config-file-and-header-files.patch

@@ -4,6 +4,8 @@ Subject: [PATCH 4/6] lib: install pkg-config file and header files
 
 These are needed to be able to develop using cryptoauthlib.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-6826
 
 Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>

meta-digi-arm/recipes-digi/cryptoauthlib/cryptoauthlib/0005-test-add-CMakeLists.txt.patch

@@ -8,6 +8,8 @@ cryptoauth_test app. Additional installation instructions were added as well.
 Move the ATCA_HAL_I2C build option to the root CMake file to enable it for both
 the library and the test app.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-6826
 
 Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>

meta-digi-arm/recipes-digi/cryptoauthlib/cryptoauthlib/0006-Remove-unnecessary-code-from-cryptoauth_test.patch

@@ -6,6 +6,8 @@ Some test commands apply to chips other than the ATECC508A, and can cause
 errors when used incorrectly. Remove all code that doesn't apply to our
 platforms.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-6826
 
 Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>

meta-digi-arm/recipes-digi/cryptoauthlib/cryptoauthlib/0007-lib-set-ATECC508A-as-default-device-type-in-default.patch

@@ -3,6 +3,8 @@ Date: Tue, 16 Nov 2021 15:44:20 +0100
 Subject: [PATCH] lib: set ATECC508A as default device type in default
  configuration
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://onedigi.atlassian.net/browse/DEL-7727
 
 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>

meta-digi-arm/recipes-kernel/dtc/dtc/0001-Remove-redundant-YYLOC-global-declaration.patch

@@ -24,6 +24,8 @@ cc1: all warnings being treated as errors
 which means the declaration is completely redundant and can just be
 dropped.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Dirk Mueller <dmueller@suse.com>
 Message-Id: <20200114175341.2994-1-dmueller@suse.com>
 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

meta-digi-arm/recipes-kernel/dtc/dtc/0001-fdtdump-Fix-gcc11-warning.patch

@@ -10,6 +10,8 @@ bytes of the buffer.
 This trips a new warning in GCC 11 - and it's entirely possible it was
 always UB.  So, don't do that.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
 (cherry picked from commit ca16a723fa9dde9c5da80dba567f48715000e77c)
 ---

meta-digi-arm/recipes-kernel/kernel-module-qualcomm/kernel-module-qualcomm/0001-add-CCX-tags-support-for-kernel-v5.15.patch

@@ -2,6 +2,8 @@ From: Hector Bujanda <hector.bujanda@digi.com>
 Date: Tue, 11 Apr 2023 12:47:24 +0200
 Subject: [PATCH] add CCX tags support for kernel v5.15
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://onedigi.atlassian.net/browse/DEL-8038
 
 Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>

meta-digi-arm/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-gpio-uapi-add-userspace-support-for-setting-debounce.patch

@@ -7,6 +7,8 @@ Added GPIO_SET_DEBOUNCE_IOCTL define and gpioline_debounce struct.
 This allows calling gpiod_set_debounce() function through char device ioctl to
 gpiolib.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-6425
 
 Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>

meta-digi-arm/recipes-kernel/linux/linux-dey/ccimx93/0001-arch-arm-add-NXP-RT-support.patch

@@ -3,6 +3,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Fri, 23 Feb 2024 08:39:38 +0100
 Subject: [PATCH 01/10] arch:arm: add NXP RT support
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 ---
  arch/arm/Kconfig                              |    5 +-

meta-digi-arm/recipes-kernel/linux/linux-dey/ccimx93/0002-RT-add-RT-localversion.patch

@@ -3,6 +3,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Fri, 23 Feb 2024 10:12:23 +0100
 Subject: [PATCH 02/10] RT: add RT localversion
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 ---
  localversion-rt | 1 +

meta-digi-arm/recipes-kernel/linux/linux-dey/ccimx93/0003-arch-arm64-add-NXP-RT-support.patch

@@ -3,6 +3,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Fri, 23 Feb 2024 12:20:36 +0100
 Subject: [PATCH 03/10] arch:arm64: add NXP RT support
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 ---
  arch/arm64/Kconfig                            |   2 +

meta-digi-arm/recipes-kernel/linux/linux-dey/ccimx93/0004-Documentation-add-NXP-RT-support.patch

@@ -3,6 +3,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Fri, 23 Feb 2024 12:28:42 +0100
 Subject: [PATCH 04/10] Documentation: add NXP RT support
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 ---
  .../mailbox/generic-software-mbox.yaml        |  65 +++

meta-digi-arm/recipes-kernel/linux/linux-dey/ccimx93/0005-include-add-NXP-RT-support.patch

@@ -3,6 +3,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Fri, 23 Feb 2024 12:30:39 +0100
 Subject: [PATCH 05/10] include: add NXP RT support
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 ---
  include/dt-bindings/clock/imx8-clock.h |  10 +++

meta-digi-arm/recipes-kernel/linux/linux-dey/ccimx93/0006-kernel-add-NXP-RT-support.patch

@@ -3,6 +3,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Sat, 24 Feb 2024 17:03:36 +0100
 Subject: [PATCH 06/10] kernel: add NXP RT support
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 ---
  kernel/Kconfig.preempt      |   6 +

meta-digi-arm/recipes-kernel/linux/linux-dey/ccimx93/0007-drivers-add-NXP-RT-support.patch

@@ -3,6 +3,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Sat, 24 Feb 2024 18:16:35 +0100
 Subject: [PATCH 07/10] drivers: add NXP RT support
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 ---
  drivers/base/Kconfig                          |    2 +-

meta-digi-arm/recipes-kernel/linux/linux-dey/ccimx93/0008-net-add-RT-NXP-support.patch

@@ -3,6 +3,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Mon, 26 Feb 2024 09:25:16 +0100
 Subject: [PATCH 08/10] net: add RT NXP support
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 ---
  net/8021q/vlan_dev.c           |   4 +-

meta-digi-arm/recipes-kernel/linux/linux-dey/ccimx93/0009-init-add-NXP-RT-support.patch

@@ -3,6 +3,8 @@ From: Mike Engel <Mike.Engel@digi.com>
 Date: Mon, 26 Feb 2024 09:43:05 +0100
 Subject: [PATCH 09/10] init: add NXP RT support
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Mike Engel <Mike.Engel@digi.com>
 ---
  init/Kconfig | 4 ++++

meta-digi-arm/recipes-kernel/linux/linux-dey/ccmp1/0023-5.15-stm32mp-rt-49-r1-CLOCK.patch

@@ -3,6 +3,8 @@ From: Lionel VITTE <lionel.vitte@st.com>
 Date: Wed, 8 Feb 2023 09:54:24 +0100
 Subject: [PATCH 23/28] 5.15-stm32mp-rt-49-r1 CLOCK
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Lionel VITTE <lionel.vitte@st.com>
 ---
  drivers/clk/stm32/clk-stm32mp13.c | 2 +-

meta-digi-arm/recipes-kernel/linux/linux-dey/ccmp1/0024-5.15-stm32mp-rt-49-r1-DMA.patch

@@ -3,6 +3,8 @@ From: Lionel VITTE <lionel.vitte@st.com>
 Date: Wed, 8 Feb 2023 09:56:07 +0100
 Subject: [PATCH 24/28] 5.15-stm32mp-rt-49-r1 DMA
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Lionel VITTE <lionel.vitte@st.com>
 ---
  drivers/dma/stm32-dma.c  | 35 +++++++++++++++++++++++++----------

meta-digi-arm/recipes-kernel/linux/linux-dey/ccmp1/0025-5.15-stm32mp-rt-49-r1-MFD.patch

@@ -3,6 +3,8 @@ From: Lionel VITTE <lionel.vitte@st.com>
 Date: Wed, 8 Feb 2023 09:56:45 +0100
 Subject: [PATCH 25/28] 5.15-stm32mp-rt-49-r1 MFD
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Lionel VITTE <lionel.vitte@st.com>
 ---
  drivers/mfd/syscon.c | 3 +++

meta-digi-arm/recipes-kernel/linux/linux-dey/ccmp1/0026-5.15-stm32mp-rt-49-r1-NET-TTY.patch

@@ -3,6 +3,8 @@ From: Lionel VITTE <lionel.vitte@st.com>
 Date: Wed, 8 Feb 2023 09:57:06 +0100
 Subject: [PATCH 26/28] 5.15-stm32mp-rt-49-r1 NET-TTY
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Lionel VITTE <lionel.vitte@st.com>
 ---
  drivers/tty/serial/stm32-usart.c | 32 +++++++++++---------------------

meta-digi-arm/recipes-kernel/linux/linux-dey/ccmp1/0027-5.15-stm32mp-rt-49-r1-DEVICETREE.patch

@@ -3,6 +3,8 @@ From: Lionel VITTE <lionel.vitte@st.com>
 Date: Wed, 8 Feb 2023 09:57:43 +0100
 Subject: [PATCH 27/28] 5.15-stm32mp-rt-49-r1 DEVICETREE
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Lionel VITTE <lionel.vitte@st.com>
 ---
  arch/arm/boot/dts/stm32mp131.dtsi | 1 -

meta-digi-arm/recipes-kernel/linux/linux-dey/ccmp1/0028-5.15-stm32mp-rt-49-r1-CONFIG.patch

@@ -3,6 +3,8 @@ From: Lionel VITTE <lionel.vitte@st.com>
 Date: Wed, 8 Feb 2023 09:59:08 +0100
 Subject: [PATCH 28/28] 5.15-stm32mp-rt-49-r1 CONFIG
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Lionel VITTE <lionel.vitte@st.com>
 ---
  .../configs/fragment-07-rt-sysvinit.config    | 12 +++++++

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0001-ARM-Add-support-for-the-ConnectCore-6UL-System-On-Mo.patch

@@ -7,6 +7,8 @@ Subject: [PATCH] ARM: Add support for the ConnectCore 6UL System-On-Module
 * Define "digi,ccimx6ul" in the compatible property so the MCA can be
   managed using the available tools.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts |  2 +-

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0002-mach-imx-pm-imx6-Add-hooks-for-board-specific-implem.patch

@@ -9,6 +9,8 @@ optionally, can be implemented by the platform code.
 This is needed on platforms like the CC6UL where the i.MX6UL has to
 notify the MCA when suspending the system or resuming from suspend.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
 ---

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0003-imx6ul-Add-MCA-core-I2C-driver-support.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] imx6ul: Add MCA core I2C driver support
 Synched with v4.14.78/master at
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi |   12 +

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0004-imx6ul-Add-MCA-GPIO-support-for-the-ConnectCore-6UL-.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] imx6ul: Add MCA GPIO support for the ConnectCore 6UL SOM
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts |   2 +

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0005-imx6ul-Add-MCA-IOMUX-support-to-the-ConnectCore-6UL-.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] imx6ul: Add MCA IOMUX support to the ConnectCore 6UL SOM
 Synched with v4.14.78/master at.
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi | 9 +++++++++

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0006-imx6ul-Add-MCA-watchdog-support-for-the-ConnectCore-.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] imx6ul: Add MCA watchdog support for the ConnectCore 6UL SOM
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  .../devicetree/bindings/watchdog/mca-cc6ul-wdt.txt |  22 ++

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0007-imx6ul-Add-MCA-ADC-support-for-ConnectCore-6UL-SOM-a.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] imx6ul: Add MCA ADC support for ConnectCore 6UL SOM and SBCs
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts |  11 +

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0008-imx6ul-Add-MCA-tamper-support-for-ConnectCore-6UL-SO.patch

@@ -7,6 +7,8 @@ Subject: [PATCH] imx6ul: Add MCA tamper support for ConnectCore 6UL SOM and
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts |   7 +

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0009-imx6ul-Add-MCA-UART-support-for-ConnectCore-6UL-SOM-.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] imx6ul: Add MCA UART support for ConnectCore 6UL SOM and SBCs
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts |  14 +

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0010-imx6ul-Add-RTC-MCA-support-for-ConnectCore-6UL-SOM.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] imx6ul: Add RTC MCA support for ConnectCore 6UL SOM
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi |   4 +

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ul/0011-imx6ul-Add-MCA-power-key-support-for-ConnectCore-6UL.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] imx6ul: Add MCA power key support for ConnectCore 6UL SOM
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi |   9 +

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ulsbc/0001-ccimx6ulsbcpro-Add-IOEXP-core-I2C-support.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] ccimx6ulsbcpro: Add IOEXP core I2C support
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/configs/imx_v6_v7_defconfig    |   1 +

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ulsbc/0002-ccimx6ulsbcpro-Add-IOEXP-GPIO-support.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] ccimx6ulsbcpro: Add IOEXP GPIO support
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 23 +++++++++++++++++++++++

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ulsbc/0003-ccimx6ulsbcpro-Add-IOEXP-ADC-support.patch

@@ -6,6 +6,8 @@ Subject: [PATCH] ccimx6ulsbcpro: Add IOEXP ADC support
 Synched with v4.14.78/master at:
 3f8b03950b323db4ca89b1cdc1c2288f79facaa3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 7 ++++++-

meta-digi-arm/recipes-kernel/linux/linux-fslc/ccimx6ulsbc/0004-ARM-dts-ccimx6ulsbcpro-Configure-touch-GPIO-reset-li.patch

@@ -10,6 +10,8 @@ This commit uses the IOEXP GPIO29 to control the DISP_5V supply which
 controls the voltage source for the reset line pull-up. It also sets the
 internal pull-up on the INT line so the line is not left floating.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 3 ++-

meta-digi-dey/dynamic-layers/qt5-layer/NXP/recipes-qt/qt5/qtbase/0016-Configure-eglfs-with-egl-pkg-config.patch

@@ -1,4 +1,6 @@
 Index: git/src/plugins/platforms/eglfs/eglfs-plugin.pro
+
+Upstream-Status: Inappropriate [digi specific]
 ===================================================================
 --- git.orig/src/plugins/platforms/eglfs/eglfs-plugin.pro	2017-01-04 16:54:05.000000000 -0600
 +++ git/src/plugins/platforms/eglfs/eglfs-plugin.pro	2017-01-04 16:56:25.000000000 -0600

meta-digi-dey/dynamic-layers/qt5-layer/NXP/recipes-qt/qt5/qtwebengine/0001-ui_features.gni-Do-not-enable-use_xkbcommon-for-non-.patch

@@ -8,6 +8,8 @@ xkbcommon is set as default in chromium
 https://chromium.googlesource.com/chromium/src.git/+/63d3d7eb06c3518c3be4d97797819d445c8060e4
 Disable it for framebuffer as xkcommon is not supported. It is supported only on x11 and wayland.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Neena Busireddy <neenareddy.busireddy@nxp.com>
 ---
  chromium/ui/base/ui_features.gni | 2 +-

meta-digi-dey/dynamic-layers/qt5-layer/recipes-qt/examples/qtsmarthome-1.0/0001-qtsmarthome-fix-runtime-warning.patch

@@ -4,6 +4,8 @@ Subject: [PATCH] qtsmarthome: fix runtime warning
 
 Both point size and pixel size set. Using pixel size.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Javier Viguera <javier.viguera@digi.com>
 ---
  components/qml/components/timepicker/PickerPathView.qml | 2 +-

meta-digi-dey/dynamic-layers/selinux/recipes-security/refpolicy/files/0001-Apply-rules-for-DEY-prebuilt-images.patch

@@ -7,6 +7,8 @@ extracting all of the AVC denials, and then running them through audit2allow.
 This allows to use most of the features that are expected to work out of the
 box in DEY.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
 ---
  policy/modules/admin/alsa.te              | 10 +++++

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0001-hcitool-do-not-show-unsupported-refresh-option.patch

@@ -2,6 +2,8 @@ From: Isaac Hermida <isaac.hermida@digi.com>
 Date: Fri, 8 Jul 2016 12:19:33 +0200
 Subject: [PATCH] hcitool: do not show unsupported refresh option
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
 ---
  tools/hcitool.c | 2 +-

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0002-Fix-not-properly-checking-for-secure-flags.patch

@@ -2,6 +2,8 @@ From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
 Date: Tue, 2 Mar 2021 11:38:33 -0800
 Subject: shared/gatt-server: Fix not properly checking for secure flags
 
+Upstream-Status: Inappropriate [digi specific]
+
 When passing the mask to check_permissions all valid permissions for
 the operation must be set including BT_ATT_PERM_SECURE flags.
 ---

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0002-hcitool-increase-the-shown-connection-limit-to-20.patch

@@ -5,6 +5,8 @@ Subject: [PATCH] hcitool: increase the shown connection limit to 20
 Created a variable to set the number of connections to shown and increase that
 value so we can list more current LE connections.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-2735
 
 Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0003-port-test-discovery-to-python3.patch

@@ -2,6 +2,8 @@ From: Isaac Hermida <isaac.hermida@digi.com>
 Date: Thu, 3 Aug 2017 14:10:43 +0200
 Subject: [PATCH] port test-discovery to python3
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
 ---
  test/bluezutils.py  |  4 ++--

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0004-example-gatt-server-update-example-to-master-version.patch

@@ -10,6 +10,8 @@ Note: In order to run it, the bluetoothd daemon needs to be started with the
 experimental (-E) flag and needs to enable and advertise the BLE
 functionallity (btmgmt le on/connectable on/advertisement on).
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-5023
 
 Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0005-core-Prefer-BR-EDR-over-LE-if-it-set-in-advertisemen.patch

@@ -6,6 +6,8 @@ Subject: [PATCH 1/7] core: Prefer BR/EDR over LE if it set in advertisement
 
 This makes the code prefer BR/EDR if the last advertisement has it set
 in the flags.
+
+Upstream-Status: Inappropriate [digi specific]
 ---
  src/adapter.c | 5 ++++-
  src/device.c  | 6 +++++-

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0006-core-device-Fix-not-connecting-services-properly.patch

@@ -6,6 +6,8 @@ Subject: [PATCH 2/7] core/device: Fix not connecting services properly
 Device.Connect shall check if the service discovery is pending or no
 service have been connected yet before switching to LE otherwise these
 services may never be connected.
+
+Upstream-Status: Inappropriate [digi specific]
 ---
  src/device.c | 15 ++++++++++++---
  1 file changed, 12 insertions(+), 3 deletions(-)

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0007-core-device-Fix-marking-auto-connect-flag.patch

@@ -7,6 +7,8 @@ Device auto-connect shall be set only if the profile is able to accept
 incoming connections, this fixes the wrong behavior or connecting LE
 with dual mode devices immediatelly after probing service as profiles
 may have auto-connect flag for outgoing connection (usually BR/EDR only).
+
+Upstream-Status: Inappropriate [digi specific]
 ---
  src/device.c | 5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0008-core-device-Prefer-bonded-bearers-when-connecting.patch

@@ -7,6 +7,8 @@ When attempting to connect a dual-mode device prefer bonded bearer if
 only one has been marked as bonded. This prevents connecting to a
 different bearer after pairing is complete and cross transport pairing
 is not supported.
+
+Upstream-Status: Inappropriate [digi specific]
 ---
  src/device.c | 6 ++++++
  1 file changed, 6 insertions(+)

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0009-input-hog-Use-.accept-and-.disconnect-instead-of-att.patch

@@ -5,6 +5,8 @@ Subject: [PATCH 5/7] input/hog: Use .accept and .disconnect instead of attio
 
 This adds .accept and .disconnect callbacks instead of attio which
 is deprecated.
+
+Upstream-Status: Inappropriate [digi specific]
 ---
  profiles/input/hog.c | 56 ++++++++++++++++++++++++++--------------------------
  src/device.c         |  8 ++++++++

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0010-src-device-Free-bonding-while-failed-to-pair-device.patch

@@ -5,6 +5,8 @@ Subject: [PATCH 6/7] src/device: Free bonding while failed to pair device
 
 device unable pair since another pairng is in progress, and need to
 free bonding before it created for next pairing.
+
+Upstream-Status: Inappropriate [digi specific]
 ---
  src/device.c | 62 +++++++++++++++++++++++++++++++-----------------------------
  1 file changed, 32 insertions(+), 30 deletions(-)

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0011-core-Fix-BR-EDR-pairing-for-dual-mode-devices.patch

@@ -8,6 +8,8 @@ events to reply with correct one on agent reply. Otherwise reply for
 BR/EDR pairing of dual mode device would use address type (which is
 valid only for LE address) resulting in reply being ignored by kernel
 and eventually pairing timeout.
+
+Upstream-Status: Inappropriate [digi specific]
 ---
  src/adapter.c |  7 ++++---
  src/device.c  | 31 +++++++++++++++++--------------

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0012-QCA_bluetooth_chip_support.patch

@@ -10,6 +10,8 @@ discipline driver. Invoke hciattach from command line and
 download the firmware patches:
 	hciattach /dev/ttyHS0 qca 3000000 -t120 flow -f0
 
+Upstream-Status: Inappropriate [digi specific]
+
 Change-Id: I87f2927d7096904071a02d73d3afef0dc34db414
 Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
 ---

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0013-hciattach_rome-Respect-the-user-indication-for-noflo.patch

@@ -8,6 +8,8 @@ supports hardware flow control.
 Basically, use 'flow' or 'noflow' on the hciattach command line arguments
 to indicate whether to use or not hardware flow control.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  tools/hciattach.c      |  2 +-

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0014-hciattach-If-the-user-supplies-a-bdaddr-use-it.patch

@@ -5,6 +5,8 @@ Subject: [PATCH] hciattach: If the user supplies a bdaddr, use it
 The QCA6564 has no non-volatile configuration file for the bluetooth
 MAC, so use the one supplied on the command line.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  tools/hciattach.c      |  4 +--

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0015-hciattach-Add-verbosity-option.patch

@@ -4,6 +4,8 @@ Subject: [PATCH] hciattach: Add verbosity option
 
 And reduce the verbosity of the hciattach_rome plugin.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
 ---
  lib/bluetooth.h        |   3 +

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/0016-bluetooth-Disable-bluetooth-low-power-mode-functionality.patch

@@ -6,6 +6,8 @@ In some conditions the low power modes cause communication
 errors between the BT chip and the system, for this reason
 we disable it by default.
 
+Upstream-Status: Inappropriate [digi specific]
+
 https://jira.digi.com/browse/DEL-3711
 
 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.41/bluetooth.service-add-customizations.patch

@@ -6,6 +6,8 @@ These changes include:
 
 * Having the bluetooth stack start automatically on boot.
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
 ---
  src/bluetooth.service.in | 2 +-

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.72/0001-bluetooth.service-add-Digi-customizations.patch

@@ -11,6 +11,8 @@ These changes include:
   request. This scenario causes random disconnects in iOS devices unless a trust agent is
   registered in the host to take care of the pairing. Removing the battery plugin at startup
   fixes the issue.
+  
+Upstream-Status: Inappropriate [digi specific]
 
 Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
 Signed-off-by: David Escalona <david.escalona@digi.com>

meta-digi-dey/recipes-connectivity/bluez/bluez5-5.72/0002-hcitool-do-not-show-unsupported-refresh-option.patch

@@ -2,6 +2,8 @@ From: Isaac Hermida <isaac.hermida@digi.com>
 Date: Fri, 8 Jul 2016 12:19:33 +0200
 Subject: [PATCH] hcitool: do not show unsupported refresh option
 
+Upstream-Status: Inappropriate [digi specific]
+
 Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
 ---
  tools/hcitool.c | 2 +-