From 370259e806bb48c70dcc522a9f67417d829dd559 Mon Sep 17 00:00:00 2001
From: Alex Gonzalez <alex.gonzalez@digi.com>
Date: Mon, 8 Sep 2014 12:08:37 +0200
Subject: [PATCH] meta-digi-arm: kernel-module-atheros, add debugging mask to
 init script.

By default debug logging is disabled, but this make it easy to enable.

Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
 .../kernel-module-atheros/atheros-pre-up      | 27 ++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/atheros-pre-up b/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/atheros-pre-up
index 232cc5569..3323f89fd 100644
--- a/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/atheros-pre-up
+++ b/meta-digi-arm/recipes-kernel/kernel-module-atheros/kernel-module-atheros/atheros-pre-up
@@ -21,6 +21,31 @@ set -e
 
 FIRMWARE_DIR="/lib/firmware/ath6k/AR6003/hw2.1.1"
 
+ATH6KL_DBG_NONE=0x0
+ATH6KL_DBG_CREDIT=0x00000001
+ATH6KL_DBG_WLAN_TX=0x00000004
+ATH6KL_DBG_WLAN_RX=0x00000008
+ATH6KL_DBG_BMI=0x00000010
+ATH6KL_DBG_HTC=0x00000020
+ATH6KL_DBG_HIF=0x00000040
+ATH6KL_DBG_IRQ=0x00000080
+ATH6KL_DBG_WMI=0x00000400
+ATH6KL_DBG_TRC=0x00000800
+ATH6KL_DBG_SCATTER=0x00001000
+ATH6KL_DBG_WLAN_CFG=0x00002000
+ATH6KL_DBG_RAW_BYTES=0x00004000
+ATH6KL_DBG_AGGR=0x00008000
+ATH6KL_DBG_SDIO=0x00010000
+ATH6KL_DBG_SDIO_DUMP=0x00020000
+ATH6KL_DBG_BOOT=0x00040000
+ATH6KL_DBG_WMI_DUMP=0x00080000
+ATH6KL_DBG_SUSPEND=0x00100000
+ATH6KL_DBG_USB=0x00200000
+ATH6KL_DBG_RECOVERY=0x00400000
+ATH6KL_DBG_ANY=0xffffffff
+
+ATH6KL_DEBUG_MASK="${ATH6KL_DBG_NONE}"
+
 #
 # Get the wlan MAC address from kernel command line.  Use a default
 # value if the address has not been set.
@@ -88,7 +113,7 @@ modprobe -q cfg80211 && sleep 0.2
 if ! grep -qs ath6kl_sdio /proc/modules; then
 	RETRIES="5"
 	while [ "${RETRIES}" -gt "0" ]; do
-		modprobe --ignore-install -q ath6kl_sdio || true
+		modprobe --ignore-install -q ath6kl_sdio debug_mask="${ATH6KL_DEBUG_MASK}" || true
 		[ -d "/sys/class/net/wlan0" ] && break
 		RETRIES="$((RETRIES - 1))"
 		rmmod ath6kl_sdio > /dev/null