Merge tag 'dey-5.0-r1.3' into dey-5.0/master
Digi Embedded Yocto 5.0-r1.3 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit is contained in:
Arturo Buzarra
commit
37517dcbe0
98
README.md
98
README.md
|
|
@ -39,38 +39,6 @@ Software for the following hardware platforms is in production support:
|
|||
* ConnectCore 93 Development Kit (DVK)
|
||||
* [CC-WMX93-KIT](https://www.digi.com/products/models/cc-wmx93-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/cc93/yocto-gs_index))
|
||||
|
||||
## ConnectCore MP13
|
||||
* ConnectCore MP13 System-on-Module (SOM)
|
||||
* [CC-WST-DX58-NK](https://www.digi.com/products/models/cc-wst-dx58-nk)
|
||||
* [CC-ST-DX58-ZK](https://www.digi.com/products/models/cc-st-dx58-zk)
|
||||
* ConnectCore MP13 Development Kit (DVK)
|
||||
* [CC-WMP133-KIT](https://www.digi.com/products/models/cc-wmp133-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/ccmp13/yocto-gs_index))
|
||||
|
||||
## ConnectCore MP15
|
||||
* ConnectCore MP15 System-on-Module (SOM)
|
||||
* [CC-WST-DW69-NM](https://www.digi.com/products/models/cc-wst-dw69-nm)
|
||||
* [CC-ST-DW69-ZM](https://www.digi.com/products/models/cc-st-dw69-zm)
|
||||
* ConnectCore MP15 Development Kit (DVK)
|
||||
* [CC-WMP157-KIT](https://www.digi.com/products/models/cc-wmp157-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/ccmp15/yocto-gs_index))
|
||||
|
||||
## ConnectCore 8M Mini
|
||||
* ConnectCore 8M Mini System-on-Module (SOM)
|
||||
* [CC-WMX-ET8D-NN](https://www.digi.com/products/models/cc-wmx-et8d-nn)
|
||||
* [CC-WMX-ET7D-NN](https://www.digi.com/products/models/cc-wmx-et7d-nn)
|
||||
* [CC-MX-ET8D-ZN](https://www.digi.com/products/models/cc-mx-et8d-zn)
|
||||
* [CC-MX-ET7D-ZN](https://www.digi.com/products/models/cc-mx-et7d-zn)
|
||||
* ConnectCore 8M Mini Development Kit (DVK)
|
||||
* [CC-WMX8MM-KIT](https://www.digi.com/products/models/cc-wmx8mm-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/cc8mmini/yocto-gs_index))
|
||||
|
||||
## ConnectCore 8M Nano
|
||||
* ConnectCore 8M Nano System-on-Module (SOM)
|
||||
* [CC-WMX-FS7D-NN](https://www.digi.com/products/models/cc-wmx-fs7d-nn)
|
||||
* [CC-WMX-FR6D-NN](https://www.digi.com/products/models/cc-wmx-fr6d-nn)
|
||||
* [CC-MX-FS7D-ZN](https://www.digi.com/products/models/cc-mx-fs7d-zn)
|
||||
* [CC-MX-FR6D-ZN](https://www.digi.com/products/models/cc-mx-fr6d-zn)
|
||||
* ConnectCore 8M Nano Development Kit (DVK)
|
||||
* [CC-WMX8MN-KIT](https://www.digi.com/products/models/cc-wmx8mn-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/cc8mnano/yocto-gs_index))
|
||||
|
||||
## ConnectCore 8X
|
||||
* ConnectCore 8X System-on-Module (SOM)
|
||||
* [CC-WMX-JM8E-NN](https://www.digi.com/products/models/cc-wmx-jm8e-nn)
|
||||
|
|
@ -98,32 +66,6 @@ Software for the following hardware platforms is in production support:
|
|||
* [CC-SBP-WMX-JN58](https://www.digi.com/products/models/cc-sbp-wmx-jn58)
|
||||
* [CC-SBP-WMX-JN7A](https://www.digi.com/products/models/cc-sbp-wmx-jn7a)
|
||||
|
||||
## ConnectCore 6 Plus
|
||||
* ConnectCore 6 Plus System-on-Module (SOM)
|
||||
* [CC-WMX-KK8D-TN](https://www.digi.com/products/models/cc-wmx-kk8d-tn)
|
||||
* ConnectCore 6 Plus professional development kit
|
||||
* [CC-WMX6P-KIT](https://www.digi.com/products/models/cc-wmx6p-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/cc6plus/yocto-gs_index))
|
||||
|
||||
## ConnectCore 6
|
||||
* ConnectCore 6 System-on-Module (SOM)
|
||||
* [CC-WMX-J97C-TN](https://www.digi.com/products/models/cc-wmx-j97c-tn)
|
||||
* [CC-WMX-L96C-TE](https://www.digi.com/products/models/cc-wmx-l96c-te)
|
||||
* [CC-WMX-L87C-TE](https://www.digi.com/products/models/cc-wmx-l87c-te)
|
||||
* [CC-MX-L76C-Z1](https://www.digi.com/products/models/cc-mx-l76c-z1)
|
||||
* [CC-MX-L86C-Z1](https://www.digi.com/products/models/cc-mx-l86c-z1)
|
||||
* [CC-MX-L96C-Z1](https://www.digi.com/products/models/cc-mx-l96c-z1)
|
||||
* [CC-WMX-L76C-TE](https://www.digi.com/products/models/cc-wmx-l76c-te)
|
||||
* CC-WMX-K87C-FJA
|
||||
* CC-WMX-K77C-TE
|
||||
* CC-WMX-L97D-TN
|
||||
* CC-WMX-J98C-FJA
|
||||
* CC-WMX-J98C-FJA-1
|
||||
* ConnectCore 6 Jumpstart Development Kit (SBC with Connectore 6 module)
|
||||
* [CC-WMX6-KIT](https://www.digi.com/products/models/cc-wmx6-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/5.0/cc6/yocto-gs_index))
|
||||
* [CC-SB-WMX-J97C-1](https://www.digi.com/products/models/cc-sb-wmx-j97c-1)
|
||||
* [CC-SB-WMX-L87C-1](https://www.digi.com/products/models/cc-sb-wmx-l87c-1)
|
||||
* [CC-SB-WMX-L76C-1](https://www.digi.com/products/models/cc-sb-wmx-l76c-1)
|
||||
|
||||
# Installation
|
||||
|
||||
Digi Embedded Yocto is composed of a set of different Yocto layers that work in
|
||||
|
|
@ -152,6 +94,24 @@ Documentation is available online at https://www.digi.com/resources/documentatio
|
|||
* Updated gstreamer1.0 to v1.22.12
|
||||
* Updated OpenSSL to v3.2.3
|
||||
* Package upgrades and security fixes
|
||||
* ST-based platforms
|
||||
* Added support to ConnectCore MP25
|
||||
* Updated BSP
|
||||
* Updated Trusted Firmware ARM v2.10 (based on tag 'v2.10-stm32mp-r1' by ST)
|
||||
* Updated OP-TEE v4.0.0 (based on tag '4.0.0-stm32mp-r1' by ST)
|
||||
* Updated U-Boot v2023.10 (based on tag 'v2023.10-stm32mp-r1' by ST)
|
||||
* Updated Linux kernel v6.6.48 (based on tag 'v6.6-stm32mp-r1.1' by ST)
|
||||
* Updated Wifi driver (based on 'v6.1.97-2024_1115' release from Cypress)
|
||||
* Updated Wifi firmware to 'imx-scarthgap-jaculus_r1.0' release from Murata
|
||||
* NXP-based platforms
|
||||
* Added support to ConnectCore 6UL
|
||||
* Added support to ConnectCore 8X
|
||||
* Added support to ConnectCore 91
|
||||
* Added support to ConnectCore 93
|
||||
* Updated BSP
|
||||
* Updated U-Boot v2024.04 (based on tag 'lf-6.6.52-2.2.0' by NXP)
|
||||
* Updated Linux kernel v6.6.52 (based on tag 'lf-6.6.52-2.2.0' by NXP)
|
||||
|
||||
|
||||
# Known Issues and Limitations
|
||||
|
||||
|
|
@ -175,23 +135,15 @@ updated list can be found on the online documentation.
|
|||
* When working as an access point, DFS-capable channels in the 5GHz band are
|
||||
not supported.
|
||||
* For P2P connections Digi recommends "Negotiated GO" modes. The QCA6564
|
||||
devices (ConnectCore 6UL, ConnectCore 6 Plus, and ConnectCore 8M Nano) fail
|
||||
to join autonomous groups.
|
||||
devices fail to join autonomous groups.
|
||||
|
||||
## ConnectCore MP25
|
||||
## ConnectCore 93
|
||||
|
||||
* ConnectCore MP2 System-on-Module (SOM)
|
||||
* Power management
|
||||
* Power management support is not yet implemented.
|
||||
* Firmware update
|
||||
* Update single file and update with rdiff don't currently work.
|
||||
|
||||
## ConnectCore MP15/MP13
|
||||
|
||||
* ConnectCore MP1 System-on-Module (SOM)
|
||||
* Wireless
|
||||
* P2P on the ConnectCore MP1 doesn't currently work in concurrency with
|
||||
other modes (station or SoftAP).
|
||||
* ConnectCore 93 System-on-Module (SOM)
|
||||
* Trustfence
|
||||
* It is not possible to close a device using U-Boot v2024.04 for Secure boot
|
||||
on a device with CPU revision A0. However, it is possible to boot v2024.04
|
||||
signed images on an already closed device.
|
||||
|
||||
## ConnectCore 6UL
|
||||
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@ UBOOT_DEVICETREE = "${STM32MP_DEVICETREE}"
|
|||
# =========================================================================
|
||||
# Define list of devicetree per supported storage
|
||||
STM32MP_DT_FILES_EMMC = "ccmp25-dvk"
|
||||
STM32MP_DT_FILES_SDCARD = "${STM32MP_DT_FILES_EMMC}"
|
||||
|
||||
# Extra DTB for board - need to specify it with .dtb ...
|
||||
STM32MP_KERNEL_DEVICETREE:ccmp25-dvk += " \
|
||||
|
|
|
|||
|
|
@ -102,6 +102,3 @@ IMAGE_FSTYPES ?= '${@bb.utils.contains("IMAGE_FEATURES", "read-only-rootfs", \
|
|||
OVERLAYFS_ETC_MOUNT_POINT ?= "/mnt/data"
|
||||
OVERLAYFS_ETC_DEVICE ?= "/dev/mmcblk0p7"
|
||||
OVERLAYFS_ETC_FSTYPE ?= "ext4"
|
||||
|
||||
PREFERRED_VERSION_nativesdk-trustfence-sign-tools:ccimx9 ?= "2024.04"
|
||||
PREFERRED_VERSION_trustfence-sign-tools-native:ccimx9 ?= "2024.04"
|
||||
|
|
|
|||
|
|
@ -84,7 +84,7 @@ DEFAULT_IMAGE_NAME ??= "dey-image-qt"
|
|||
IMAGE_LINK_NAME = "${IMAGE_BASENAME}${IMAGE_MACHINE_SUFFIX}"
|
||||
|
||||
# List of graphical images names (for install scripts)
|
||||
GRAPHICAL_IMAGES ?= "dey-image-crank dey-image-qt dey-image-webkit dey-image-lvgl"
|
||||
GRAPHICAL_IMAGES ?= "dey-image-qt dey-image-webkit dey-image-lvgl"
|
||||
|
||||
# Default wayland socket
|
||||
WAYLAND_DISPLAY ?= "wayland-1"
|
||||
|
|
@ -114,4 +114,4 @@ BOOTLOADER_SEEK_BOOTPART ?= "0"
|
|||
# Default all platforms to use /root as the home root folder.
|
||||
# This is otherwise forced by systemd because of hard-coded paths
|
||||
# in systemd source code.
|
||||
ROOT_HOME ?= "/root"
|
||||
ROOT_HOME ?= "/root"
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (C) 2022-2024, Digi International Inc.
|
||||
# Copyright (C) 2022-2025, Digi International Inc.
|
||||
#
|
||||
|
||||
# Select internal or Github OPTEE repo
|
||||
|
|
|
|||
|
|
@ -6,8 +6,9 @@ LICENSE = "CYPRESS-EULA"
|
|||
LIC_FILES_CHKSUM = "file://${S}/cyw-bt-patch/LICENCE.cypress;md5=cbc5f665d04f741f1e006d2096236ba7"
|
||||
|
||||
SRC_URI = " \
|
||||
https://github.com/Infineon/ifx-linux-firmware/archive/refs/tags/release-v6.1.97-2024_1115.tar.gz;destsuffix=cyw-fmac-fw-ifx;name=cyw-fmac-fw-ifx \
|
||||
git://github.com/murata-wireless/cyw-fmac-fw;protocol=http;branch=jaculus;destsuffix=cyw-fmac-fw;name=cyw-fmac-fw \
|
||||
git://github.com/murata-wireless/cyw-fmac-nvram;protocol=http;branch=master;destsuffix=cyw-fmac-nvram;name=cyw-fmac-nvram \
|
||||
git://github.com/murata-wireless/cyw-fmac-nvram;protocol=http;branch=jaculus;destsuffix=cyw-fmac-nvram;name=cyw-fmac-nvram \
|
||||
git://github.com/murata-wireless/cyw-bt-patch;protocol=http;branch=master;destsuffix=cyw-bt-patch;name=cyw-bt-patch \
|
||||
git://github.com/murata-wireless/cyw-fmac-utils-imx32;protocol=http;branch=master;destsuffix=cyw-fmac-utils-imx32;name=cyw-fmac-utils-imx32 \
|
||||
git://github.com/murata-wireless/cyw-fmac-utils-imx64;protocol=http;branch=master;destsuffix=cyw-fmac-utils-imx64;name=cyw-fmac-utils-imx64 \
|
||||
|
|
@ -21,12 +22,14 @@ SRC_URI:append:ccmp1 = " \
|
|||
"
|
||||
|
||||
SRC_URI:append:ccmp2 = " \
|
||||
file://cyfmac55500-sdio.txt \
|
||||
file://mbt \
|
||||
"
|
||||
|
||||
SRCREV_cyw-fmac-fw="acc1006a873a196495ed209bd18b3f47b4128426"
|
||||
SRCREV_cyw-fmac-nvram="fd6587f8183b612ea52404c7a73aeb2698099587"
|
||||
SRCREV_cyw-bt-patch="83f8e16423c47e195f52a06fd68ac92a20a80a9f"
|
||||
SRC_URI[cyw-fmac-fw-ifx.sha256sum]="34f5bfac6476d849af26f945705dc5a19965825333840405ef25dcd835d521d7"
|
||||
SRCREV_cyw-fmac-fw="a5cb86a5d11192ba6e7738f82b4d2dc9eeeca679"
|
||||
SRCREV_cyw-fmac-nvram="146d1438372b6c4857f92b8769b91c1801d3ede2"
|
||||
SRCREV_cyw-bt-patch="742f5cec14c98000dc532518c9e5acaec40de668"
|
||||
SRCREV_cyw-fmac-utils-imx32="dad9ed86bf6691910197bc91d42a45ea8175180c"
|
||||
SRCREV_cyw-fmac-utils-imx64="368bd9a4163e115468d79c238192b41f6266c523"
|
||||
|
||||
|
|
@ -73,7 +76,7 @@ do_install:append:ccmp1 () {
|
|||
|
||||
# Install WLAN firmware file (*.bin) and Regulatory binary file (*.clm_blob)
|
||||
# For Murata 2AE (LBEE5PK2AE-564)
|
||||
install -m 444 ${S}/cyw-fmac-fw/cyfmac4373-sdio.2AE.bin ${D}${base_libdir}/firmware/cypress/cyfmac4373-sdio.bin
|
||||
install -m 444 ${S}/ifx-linux-firmware-release-v6.1.97-2024_1115/firmware/cyfmac4373-sdio.industrial.bin ${D}${base_libdir}/firmware/cypress/cyfmac4373-sdio.bin
|
||||
install -m 444 cyfmac4373-sdio_US.clm_blob ${D}${base_libdir}/firmware/cypress/cyfmac4373-sdio_US.clm_blob
|
||||
install -m 444 cyfmac4373-sdio_World.clm_blob ${D}${base_libdir}/firmware/cypress/cyfmac4373-sdio_World.clm_blob
|
||||
|
||||
|
|
@ -88,16 +91,16 @@ do_install:append:ccmp2 () {
|
|||
|
||||
# Install Bluetooth patch *.HCD file
|
||||
# For Murata 2GY (LBEE5HY2GY) and Murata 2FY (LBEE5HY2FY)
|
||||
install -m 444 ${S}/cyw-bt-patch/CYW55500A1_001.002.032.0040.0033_FCC.hcd ${D}${base_libdir}/firmware/brcm/CYW55500A1.hcd
|
||||
install -m 444 ${S}/cyw-bt-patch/CYW55500A1_001.002.032.0040.0033.2FY.hcd ${D}${base_libdir}/firmware/brcm/CYW55500A1.hcd
|
||||
|
||||
# Install WLAN firmware file (*.bin) and Regulatory binary file (*.clm_blob)
|
||||
# For Murata 2GY (LBEE5HY2GY) and Murata 2FY (LBEE5HY2FY)
|
||||
install -m 444 ${S}/cyw-fmac-fw/cyfmac55500-sdio.trxse ${D}${base_libdir}/firmware/cypress/cyfmac55500-sdio.trxse
|
||||
install -m 444 ${S}/ifx-linux-firmware-release-v6.1.97-2024_1115/firmware/cyfmac55500-sdio.trxse ${D}${base_libdir}/firmware/cypress/cyfmac55500-sdio.trxse
|
||||
install -m 444 ${S}/cyw-fmac-fw/cyfmac55500-sdio.2FY.clm_blob ${D}${base_libdir}/firmware/cypress/cyfmac55500-sdio_US.clm_blob
|
||||
|
||||
# Install NVRAM files (*.txt)
|
||||
# For Murata 2GY (LBEE5HY2GY) and Murata 2FY (LBEE5HY2FY)
|
||||
install -m 444 ${S}/cyw-fmac-nvram/cyfmac55500-sdio.2FY.txt ${D}${base_libdir}/firmware/cypress/cyfmac55500-sdio.txt
|
||||
install -m 444 ${S}/cyfmac55500-sdio.txt ${D}${base_libdir}/firmware/cypress/cyfmac55500-sdio.txt
|
||||
|
||||
# Install Manufacturing Bluetooth Test tool (MBT)
|
||||
install -m 755 mbt ${D}${sbindir}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,471 @@
|
|||
#CYW955513SDM2WLIPA_TAG215
|
||||
#802.11ax 1x1 Tri-Band HE20 WiFi 6/6e + BT/BLE 5.2 Combo with SDIO/SPI interface
|
||||
#Type2FY
|
||||
NVRAMRev=$Rev: 5062 $
|
||||
sromrev=11
|
||||
boardrev=0x1530
|
||||
boardtype=0x0904
|
||||
boardflags=0x00400001
|
||||
boardflags2=0x00800000
|
||||
boardflags3=0x40000100
|
||||
#boardnum=57410
|
||||
macaddr=00:90:4c:2e:c3:05
|
||||
|
||||
#Regulatory specific
|
||||
ccode=0
|
||||
regrev=0
|
||||
|
||||
# Board specific
|
||||
vendid=0x12be
|
||||
devid=0xbd3e
|
||||
manfid=0x2d0
|
||||
antswitch=0
|
||||
pdgain5g=0
|
||||
pdgain2g=0
|
||||
aa2g=1
|
||||
aa5g=1
|
||||
agbg0=2
|
||||
aga0=2
|
||||
extpagain5g=2
|
||||
extpagain2g=2
|
||||
rxgains2gelnagaina0=0
|
||||
rxgains2gtrisoa0=13
|
||||
rxgains2gtrelnabypa0=0
|
||||
rxgains5gelnagaina0=0
|
||||
rxgains5gtrisoa0=7
|
||||
rxgains5gtrelnabypa0=0
|
||||
rxgains5gmelnagaina0=0
|
||||
rxgains5gmtrisoa0=7
|
||||
rxgains5gmtrelnabypa0=0
|
||||
rxgains5ghelnagaina0=0
|
||||
rxgains5ghtrisoa0=7
|
||||
rxgains5ghtrelnabypa0=0
|
||||
|
||||
# ==== RSSI related parametes start ==============================================================
|
||||
# 2G-Core0 [20MHz, 40Mhz]
|
||||
rssicorrnorm_c0=-5,0
|
||||
# ===================================
|
||||
# 5G-Core0 [20MHz(l), 40MHz(l), 80Mhz(l), 20MHz(ml), 40MHz(ml), 80Mhz(ml), 20MHz(mu), 40MHz(mu), 80Mhz(mu), 20MHz(h), 40MHz(h), 80Mhz(h)]
|
||||
# 5170 to below 5500(ch36 to ch96) - l
|
||||
# 5500 to below 5620(ch100 to ch120) - ml
|
||||
# 5620 to below 5745(ch124 to ch144) - mu
|
||||
# 5745 to below 5835(ch149 to ch165) - h
|
||||
# ===================================
|
||||
rssicorrnorm5g_c0=7,0,0,6,0,0,3,0,0,4,0,0
|
||||
# 6G-Core0 [20MHz(u5), 40MHz(u5), 80Mhz(u5), 20MHz(u6), 40MHz(u6), 80Mhz(u6), 20MHz(u7), 40MHz(u7), 80Mhz(u7), 20MHz(u8), 40MHz(u8), 80Mhz(u8)]
|
||||
rssicorrnorm6g_c0=1,0,0,-4,0,0,-2,0,0,0,0,0
|
||||
|
||||
# These parameter are not required (seems obsolete), valid for fast AGC
|
||||
#rssi_delta_5gl=-6 4 -8 -8 -6 4 -8 -8 -6 4 -8 -8 -3 6 -3 -4 -3 6 -3 -4 -3 6 -3 -4
|
||||
#rssi_delta_5gml=-1 3 -1 -3 -1 3 -1 -3 -1 3 -1 -3 -1 2 0 -2 -1 2 0 -2 -1 2 0 -2
|
||||
#rssi_delta_5gmu=0 3 -1 -2 0 3 -1 -2 0 3 -1 -2 0 2 0 -2 0 2 0 -2 0 2 0 -2
|
||||
#rssi_delta_5gh=2 4 2 -1 2 4 2 -1 2 4 2 -1 0 0 2 -2 0 0 2 -2 0 0 2 -2
|
||||
#rssi_delta_6gunii5=-6 4 -8 -8 -6 4 -8 -8 -6 4 -8 -8 -3 6 -3 -4 -3 6 -3 -4 -3 6 -3 -4
|
||||
#rssi_delta_6gunii6=-1 3 -1 -3 -1 3 -1 -3 -1 3 -1 -3 -1 2 0 -2 -1 2 0 -2 -1 2 0 -2
|
||||
#rssi_delta_6gunii7=0 3 -1 -2 0 3 -1 -2 0 3 -1 -2 0 2 0 -2 0 2 0 -2 0 2 0 -2
|
||||
#rssi_delta_6gunii8=2 4 2 -1 2 4 2 -1 2 4 2 -1 0 0 2 -2 0 0 2 -2 0 0 2 -2
|
||||
rssi_cal_rev=1
|
||||
rxgaincal_rssical=1
|
||||
|
||||
# Correction for low rssi region
|
||||
low_pwr_rssi_thresh_qdBm_5g=-334
|
||||
low_pwr_rssi_bias_5g_c0=-2,0,0,-8,0,0,-6,0,0,-8,0,0
|
||||
|
||||
# Setting this to 255 to disable temp based compensation
|
||||
gain_cal_temp=25
|
||||
rxgain_tempcoeff2g_sub=32,32,32,32,32,32,32,32,32,32
|
||||
rxgain_tempcoeff5gl=28
|
||||
rxgain_tempcoeff5gml=24
|
||||
rxgain_tempcoeff5gmu=24
|
||||
rxgain_tempcoeff5gh=24
|
||||
rxgain_tempcoeff2g_sub_elnaoff=32,32,32,32,32,32,32,32,32,32
|
||||
rxgain_tempcoeff5gl_elnaoff=28
|
||||
rxgain_tempcoeff5gml_elnaoff=22
|
||||
rxgain_tempcoeff5gmu_elnaoff=22
|
||||
rxgain_tempcoeff5gh_elnaoff=22
|
||||
rxgain_tempcoeff6g_unii5=24
|
||||
rxgain_tempcoeff6g_unii6=24
|
||||
rxgain_tempcoeff6g_unii7=28
|
||||
rxgain_tempcoeff6g_unii8=34
|
||||
|
||||
# Each nibble represent 2G channel from 1 to 14. LSB 3 bits specify group number (i.e. 0 to 4), MSB specify if ch used for calibration
|
||||
rssi_cal_freq_grp_2g= 0x08,0x01,0x91,0x2a,0x23,0xb3,0xc4
|
||||
rssi_delta_2gb0=0,0,0,0
|
||||
rssi_delta_2gb1=0,0,0,0
|
||||
rssi_delta_2gb2=0,0,0,0
|
||||
rssi_delta_2gb3=0,0,0,0
|
||||
rssi_delta_2gb4=0,0,0,0
|
||||
# ==== RSSI related parametes end ==============================================================
|
||||
|
||||
#Two range TSSI
|
||||
tworangetssi2g=0
|
||||
tworangetssi5g=0
|
||||
# NOTE :================================================================================
|
||||
# To run TPC with Two Range TSSI ,set tworangetssi2g = 1 and lowpowerrange2g = 0
|
||||
# To run TPC with Single Range TSSI, set tworangetssi2g = 0
|
||||
# To run TPC please READ instructions near pa2ga0 and pa2ga1 as well
|
||||
# To generate PA params for Low Range set tworangetssi2g = 0 and lowpowerrange2g to 1
|
||||
# To generate PA params for High Range set tworangetssi2g = 1 and lowpowerrange2g to 1
|
||||
# ======================================================================================
|
||||
#lowpowerrange2g=0
|
||||
#lowpowerrange5g=0
|
||||
|
||||
#Related to FW Download. Host may use this
|
||||
nocrc=1
|
||||
#FIXME:4369 otpimagesize? Check with Rama
|
||||
otpimagesize=502
|
||||
|
||||
xtalfreq=37400
|
||||
|
||||
txchain=1
|
||||
rxchain=1
|
||||
|
||||
cckdigfilttype=3
|
||||
cck_txgain_offsetval=0x18
|
||||
|
||||
#bit mask for slice capability bit 0:2G bit 1:5G
|
||||
bandcap=2
|
||||
|
||||
|
||||
#FDSS Related
|
||||
fdss_level_5g=9
|
||||
fdss_interp_en=0
|
||||
fdss_level_2g=4
|
||||
|
||||
#FIXME: fdss level for 6G made same as 5G for now
|
||||
fdss_level_6g=9
|
||||
|
||||
#LPB related : FIXME Enable later
|
||||
leg_preamble_boost=12,12,0
|
||||
lpb_comp=10
|
||||
|
||||
#PAPRR Related
|
||||
paprdis=0
|
||||
paprrmcsgain2g=130,130,130,129,128,0,0,0,0,0,0,0
|
||||
paprrmcsgamma2g=550,550,550,650,700,-1,-1,-1,-1,-1,-1,-1
|
||||
paprrmcsgain5g20=130,130,130,129,128,0,0,0,0,0,0,0
|
||||
paprrmcsgamma5g20=500,500,550,650,700,-1,-1,-1,-1,-1,-1,-1
|
||||
|
||||
#PAPR params for 6G
|
||||
#FIXME: papr params 6G made same as 5G for now
|
||||
paprrmcsgain6g20=130,130,130,129,128,0,0,0,0,0,0,0
|
||||
paprrmcsgamma6g20=500,500,550,650,700,-1,-1,-1,-1,-1,-1,-1
|
||||
|
||||
#Tempsense Related
|
||||
tempthresh=255
|
||||
tempoffset=255
|
||||
rawtempsense=0x1ff
|
||||
phycal_tempdelta=15
|
||||
temps_period=15
|
||||
temps_hysteresis=15
|
||||
|
||||
#------------- TSSI Related -------------
|
||||
tssipos2g=1
|
||||
tssipos5g=1
|
||||
|
||||
AvVmid_c0=6,75,5,93,5,93,5,93,5,93,5,90,5,90,5,90,5,90
|
||||
|
||||
low_adc_rate_en=1
|
||||
#limit Tx gain index
|
||||
txidxcap2g=10
|
||||
txidxcap5g=10
|
||||
txidxcap6g=10
|
||||
|
||||
# Single RANGE TPC/TSSI
|
||||
#2G OFDM
|
||||
#pa2ga0=0,8015,-676
|
||||
pa2ga0=-156,6167,-696
|
||||
#2G CCK
|
||||
#pa2gccka0=0,8015,-676
|
||||
pa2gccka0=-110,7093,-749
|
||||
#5G channels:36 to 48,52 to 64,100 to 144,149 to 165
|
||||
#pa5ga0=-94,7015,-664,-88,7081,-659,-135,6774,-703,-110,7005,-685
|
||||
pa5ga0=-198,5370,-617,-211,5672,-695,-191,6112,-720,-170,5778,-646
|
||||
#PA Params 6G UNII-5,6,7,8
|
||||
#pa6ga0=-157,6659,-714,-156,6675,-721,-145,6830,-731,-162,6499,-716
|
||||
pa6ga0=-137,6057,-650,-147,6141,-680,-119,6556,-698,-136,6816,-749
|
||||
|
||||
|
||||
# Max power and offsets
|
||||
maxp2ga0=86
|
||||
maxp5ga0=70,70,70,70
|
||||
#Max Power on 6G UNII-5/6 and UNII-7/8
|
||||
maxp6ga0=70,70
|
||||
|
||||
subband5gver=0x4
|
||||
paparambwver=3
|
||||
cckpwroffset0=0
|
||||
|
||||
# PD offsets for 2G,5G,6G
|
||||
# 2G power offset per channel
|
||||
powoffs2gtna0=0,0,0,0,0,0,0,0,0,0,0,0,0,0
|
||||
# 5G power offset per channel for band edge channel
|
||||
powoffs5g20mtna0=0,0,0,0,0,0,0
|
||||
pdoffset20ma0=0x0000
|
||||
pdoffset6g20ma0=0x0000
|
||||
pdoffset6g20ma0_group1=0x0000
|
||||
|
||||
cckbw202gpo=0x2220
|
||||
cckbw20ul2gpo=0x2220
|
||||
mcsbw202gpo=0xaa886666
|
||||
|
||||
dot11agofdmhrbw202gpo=0x6666
|
||||
ofdmlrbw202gpo=0x0066
|
||||
mcsbw205glpo=0x66400000
|
||||
mcsbw205gmpo=0x66400000
|
||||
mcsbw205ghpo=0x66400000
|
||||
|
||||
# ppr offsets for UNII-5/6 of 6GHz band
|
||||
mcsbw206glpo=0x66400000
|
||||
|
||||
# ppr offsets for UNII-7/8 of 6GHz band
|
||||
mcsbw206gmpo=0x66400000
|
||||
|
||||
mcs1024qam2gpo=0xffcc
|
||||
mcs1024qam5glpo=0xffffcc
|
||||
mcs1024qam5gmpo=0xffffcc
|
||||
mcs1024qam5ghpo=0xffffcc
|
||||
mcs1024qam5gx1po=0xffffcc
|
||||
mcs1024qam5gx2po=0xffffcc
|
||||
mcs8poexp=0
|
||||
mcs9poexp=0
|
||||
mcs10poexp=0
|
||||
mcs11poexp=0
|
||||
# 1024QAM rates' offset for 6GHz UNII-5/6
|
||||
mcs1024qam6glpo=0xffffcc
|
||||
# 1024QAM rates' offset for 6GHz UNII-7/8
|
||||
mcs1024qam6gmpo=0xffffcc
|
||||
|
||||
#UL-OFDMA PPR's accros RU's
|
||||
#currently programmed same PPR accross RU's
|
||||
#across QAM's the PPR are same b/w SU and RU
|
||||
#each RU PPR is grouped with 5 bits
|
||||
ruppr2g20bpska0=0x10842
|
||||
ruppr2g20qpska0=0x10842
|
||||
ruppr2g20qam16a0=0x10842
|
||||
ruppr2g20qam64a0=0x294A5
|
||||
ruppr2g20qam256a0=0x42108
|
||||
ruppr2g20qam1024a0=0x5294A
|
||||
ruppr5g20bpska0=0x0
|
||||
ruppr5g20qpska0=0x0
|
||||
ruppr5g20qam16a0=0x10842
|
||||
ruppr5g20qam64a0=0x10842
|
||||
ruppr5g20qam256a0=0x18c63
|
||||
ruppr5g20qam1024a0=0x294A5
|
||||
|
||||
# OLPC Related
|
||||
disable_olpc=0
|
||||
olpc_thresh5g=60
|
||||
olpc_anchor5g=64
|
||||
disable_olpc_2g=0
|
||||
olpc_thresh2g=56
|
||||
olpc_anchor2g=60
|
||||
#FIXME: olpc params 6G made same as 5G for now
|
||||
olpc_thresh6g=60
|
||||
olpc_anchor6g=64
|
||||
|
||||
#LTE Coex Related
|
||||
ltecxmux=0
|
||||
ltecxpadnum=0x0504
|
||||
ltecxfnsel=0x44
|
||||
ltecxgcigpio=0x04
|
||||
#OOB params
|
||||
#device_wake_opt=1
|
||||
#host_wake_opt=0
|
||||
|
||||
# SWCTRL Related
|
||||
swctrlmap_5g=0x08080808,0x02020202,0x08080808,0x010008,0x00f
|
||||
swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
|
||||
fem_table_init_val=0x06060606,0x08080808
|
||||
fem_table_init_val_ext=0x00000000,0x00000000
|
||||
|
||||
swctrlmap_2g=0x06060606,0x08080808,0x06060606,0x010008,0x10f
|
||||
swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
|
||||
|
||||
clb2gslice0core0=0xd
|
||||
clb5gslice0core0=0x2
|
||||
#For TDM coex use the following
|
||||
btc_prisel_ant_mask=0x0
|
||||
clb_swctrl_smask_ant0=0x3ff
|
||||
# 2 Ant hyb/par following comment above
|
||||
#btc_prisel_ant_mask=0x3
|
||||
#clb_swctrl_smask_ant0=0x34f
|
||||
muxenab=0x10
|
||||
|
||||
#BT Coex 1:TDM
|
||||
btc_mode=1
|
||||
|
||||
# --- PAPD Cal related params ----
|
||||
# 0:NBPAPD 1:WBPAPD
|
||||
txwbpapden=1
|
||||
# NB PAPD Cal params
|
||||
# 0x5Gc02Gc0
|
||||
nb_eps_offset=0x01dd01e3
|
||||
nb_bbmult=0x5550
|
||||
nb_papdcalidx=0x050a
|
||||
nb_txattn=0x0000
|
||||
nb_rxattn=0x0000
|
||||
papdgainctrl2g=0
|
||||
papdgainctrl5g=0
|
||||
pacalshift2g=5
|
||||
pacalshift5g=4
|
||||
eps_stopidx=63
|
||||
# two-core specific variables for each of UNII-5/6/7/8 bands
|
||||
# u5c0,u6c0,u7c0,u8c0
|
||||
nb_txattn_6g=0,0,0,0
|
||||
nb_rxattn_6g=0,0,0,0
|
||||
nb_papdcalidx_6g=10,10,10,10
|
||||
nb_bbmult_6g=80,80,80,80
|
||||
nb_eps_offset_6g=475,475,475,475
|
||||
papdgainctrl6g=0
|
||||
pacalshift6g20=3,4,4,4
|
||||
|
||||
# WB papd cal params
|
||||
# c02g,c05g20
|
||||
wb_txattn=0,1
|
||||
wb_rxattn=0,0
|
||||
wb_tia_gain_mode=2,2
|
||||
wb_eps_offset=474,462
|
||||
wb_papdcalidx=10,5
|
||||
wb_bbmult=64,90
|
||||
wb_calref_db=23,24
|
||||
wb_txbuf_offset=33,32
|
||||
wb_frac_del=255,255
|
||||
wb_g_frac_bits=10,10
|
||||
|
||||
# WB 6G cal params
|
||||
# u5c0,u6c0,u7c0,u8c0
|
||||
wb_txattn_6g20=1,1,1,1
|
||||
wb_rxattn_6g20=0,0,0,0
|
||||
wb_tia_gain_mode_6g20=4,4,2,5
|
||||
wb_papdcalidx_6g20=10,10,5,30
|
||||
wb_bbmult_6g20=70,80,80,86
|
||||
wb_eps_offset_6g20=470,468,463,471
|
||||
wb_calref_db_6g20=24,24,24,28
|
||||
|
||||
|
||||
#2nd LUT parameters
|
||||
wb_multipapd_en=0
|
||||
wb_PapdLutSel_idx_6g20=42,42,42,42
|
||||
wb_eps_index_offset_6g20=5,5,5,5
|
||||
wb_papdcalidx_6g20_lut1=10,10,10,10
|
||||
wb_bbmult_6g20_lut1=66,70,74,74
|
||||
wb_calref_db_6g20_lut1=26,26,26,26
|
||||
|
||||
# WBPAPD gain control params
|
||||
wb_gainctrl_nvram_en=1
|
||||
wb_target_tssi_2g20=200
|
||||
wb_target_tssi_5g20=210,210,210,150
|
||||
wb_target_tssi_6g20=75,71,100,-45
|
||||
wb_fudge_factor_2g5g=1,0,-1,-1,-1
|
||||
|
||||
# 2g/5G 2nd PAPD LUT parameters applicable for -40degc
|
||||
wb_eps_offset_lut1=22,10
|
||||
wb_calref_db_lut1=23,19
|
||||
wb_papdcalidx_lut1=10,10
|
||||
wb_bbmult_lut1=25,40
|
||||
wb_PapdLutSel_idx_2g5g=53,52
|
||||
|
||||
# energy detect threshold
|
||||
ed_thresh2g=-65
|
||||
ed_thresh5g=-68
|
||||
ed_thresh6g=-78
|
||||
# energy detect threshold for EU
|
||||
eu_edthresh2g=-65
|
||||
eu_edthresh5g=-68
|
||||
eu_edthresh6g=-78
|
||||
|
||||
btldopu=0
|
||||
|
||||
#rpcal coef for imptxbf
|
||||
rpcal2g=0
|
||||
rpcal5gb0=238
|
||||
rpcal5gb1=228
|
||||
rpcal5gb2=222
|
||||
rpcal5gb3=229
|
||||
|
||||
#Enable LHL PS mode
|
||||
lhl_ps_mode=3
|
||||
|
||||
#SR related params
|
||||
#The min resource state during sleep
|
||||
rmin=0x1
|
||||
#disable sr topoff
|
||||
lpflags=0
|
||||
#disable fastlpo setting
|
||||
fastlpo_pcie_dis=0
|
||||
fastlpo_dis=0
|
||||
|
||||
#PALDO settings 0=3.3 1=3.35 2=3.41 3=3.46 4=2.86, 5=2.97 6=3.08, 7=3.19
|
||||
#paldo3p3_voltage=0
|
||||
|
||||
#2G lowpwr settings 0=TOT 1=setting1 2=setting2 3=settingHE(lowpwr)
|
||||
#ipa2glowpwr=3
|
||||
|
||||
#temperature throttling
|
||||
# Currently tvpm is not part of H1 build, disable for initial BU
|
||||
tvpm=1
|
||||
tvpm_txc_txdc=105,15
|
||||
tvpm_txc_txdc_lowlimit=1
|
||||
tvpm_txc_txdc_insert=0,0
|
||||
tvpm_monitor_period=3
|
||||
#temperature throttling, aggressive setting
|
||||
tvpm_txc_txdc_burst=110,20,5
|
||||
|
||||
##Dynamic Desense Params for 2 ant hybrid coex
|
||||
#btcdyn_flags=3
|
||||
#btcdyn_dflt_dsns_level=0
|
||||
#btcdyn_low_dsns_level=1
|
||||
#btcdyn_mid_dsns_level=2
|
||||
#btcdyn_high_dsns_level=4
|
||||
#btcdyn_default_btc_mode=5
|
||||
#btcdyn_dsns_rows=2
|
||||
#btcdyn_dsns_row1=5,-4,0,-50,-70
|
||||
#btcdyn_dsns_row0=5,12,0,-50,-65
|
||||
|
||||
ppr_hitemp_offset=70,10
|
||||
# idx 0: PPR temp thresh, default 150
|
||||
# idx 1: PPR temp thresh hysteresis, default 15
|
||||
cckbw202gpo_ht=0x6666
|
||||
# CCK high temp offset, 0.5dBm/step, rate(11,5.5,2,1Mbps)
|
||||
ofdmbw202gpo_ht=0x66666666
|
||||
# 2G OFDM temp offset, 0.5dBm/step, rate(54,48,36,24,18,12,9,6Mbps)
|
||||
mcsbw202gpo_ht=0x66666666
|
||||
# 2G BW20 VHT/HT temp offset, 0.5dBm/step, rate(C9,C8,M7,M6,M5,M4,M3,M2-0)
|
||||
mcsbw202gpo_1024qam_ht=0x66
|
||||
# 2G BW20 HE/VHT temp offset, 0.5dBm/step, rate(C11,C10)
|
||||
ofdmbw205gpo_ht=0x66666666
|
||||
# 5G OFDM temp offset, 0.5dBm/step, rate(54,48,36,24,18,12,9,6Mbps)
|
||||
mcsbw205gpo_ht=0x66666666
|
||||
# 5G BW20 HE/VHT/HT temp offset, 0.5dBm/step, rate(C9,C8,M7,M6,M5,M4,M3,M2-0)
|
||||
mcsbw205gpo_1024qam_ht=0x66
|
||||
# 5G BW20 HE/VHT temp offset, 0.5dBm/step, rate(C11,C10)
|
||||
ofdmbw206gpo_ht=0x66666666
|
||||
# 6G OFDM temp offset, 0.5dBm/step, rate(54,48,36,24,18,12,9,6Mbps)
|
||||
mcsbw206gpo_ht=0x66666666
|
||||
# 6G BW20 HE/VHT/HT temp offset, 0.5dBm/step, rate(C9,C8,M7,M6,M5,M4,M3,M2-0)
|
||||
mcsbw206gpo_1024qam_ht=0x66
|
||||
# 6G BW20 HE/VHT temp offset, 0.5dBm/step, rate(C11,C10)
|
||||
|
||||
# SWDIV related
|
||||
swdiv_en=0 #To enable SW-DIV feature
|
||||
swdiv_gpio=0
|
||||
swdiv_swctrl_en=2
|
||||
swdiv_swctrl_ant0=0
|
||||
swdiv_swctrl_ant1=1
|
||||
swdiv_antmap2g_main=1
|
||||
swdiv_antmap5g_main=1
|
||||
|
||||
swdiv_snrlim=290 #Only enable sw_div if the snr on present antenna is less than 290/8=36.25
|
||||
swdiv_thresh=2000 #No.of rxpkts threshold
|
||||
swdiv_snrthresh=24 #Difference between antenna's snr is greater than 24/8=3dB, then shift the antennas
|
||||
swdiv_timeon=10
|
||||
swdiv_timeoff=1
|
||||
swdiv_snr2g20=232
|
||||
swdiv_snr2g40=257
|
||||
swdiv_snr5g20=232
|
||||
swdiv_snr5g40=312
|
||||
swdiv_snr5g80=296
|
||||
|
||||
swdiv_ap_dead_check=0 #Enable sending of null frames at a periodicity of 1 sec to check whether the present antenna is dead
|
||||
swdiv_ap_div=0 #Enabling ap_diversity
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# Copyright (C) 2024 Digi International Inc.
|
||||
# Copyright (C) 2024,2025, Digi International Inc.
|
||||
|
||||
require u-boot-dey.inc
|
||||
LIC_FILES_CHKSUM = "file://Licenses/README;md5=2ca5f2c35c8cc335f0a19756634782f1"
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
# Copyright (C) 2024, Digi International Inc.
|
||||
# Copyright (C) 2024,2025, Digi International Inc.
|
||||
|
||||
require u-boot-dey.inc
|
||||
|
||||
|
|
|
|||
|
|
@ -1,6 +0,0 @@
|
|||
# Copyright (C) 2024, Digi International Inc.
|
||||
|
||||
require nativesdk-trustfence-sign-tools_git.bb
|
||||
|
||||
SRCBRANCH = "v2024.04/master"
|
||||
SRCREV = "${AUTOREV}"
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
# Copyright (C) 2024, Digi International Inc.
|
||||
|
||||
require trustfence-sign-tools-native_git.bb
|
||||
|
||||
SRCBRANCH = "v2024.04/master"
|
||||
SRCREV = "${AUTOREV}"
|
||||
|
|
@ -1,10 +1,10 @@
|
|||
# Copyright (C) 2017-2023, Digi International Inc.
|
||||
# Copyright (C) 2017-2025, Digi International Inc.
|
||||
|
||||
SUMMARY = "TrustFence signing and encryption scripts"
|
||||
LICENSE = "GPL-2.0-only"
|
||||
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/GPL-2.0-only;md5=801f80980d171dd6425610833a22dbe6"
|
||||
|
||||
SRCBRANCH = "v2020.04/master"
|
||||
SRCBRANCH = "v2024.04/master"
|
||||
SRCREV = "${AUTOREV}"
|
||||
|
||||
S = "${WORKDIR}"
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
# Copyright (C) 2016-2023, Digi International Inc.
|
||||
# Copyright (C) 2016-2025, Digi International Inc.
|
||||
|
||||
SUMMARY = "Qualcomm's wireless driver for qca65xx"
|
||||
DESCRIPTION = "qcacld-2.0 module"
|
||||
|
|
|
|||
|
|
@ -66,4 +66,4 @@ kernel_do_deploy:append:ccmp1() {
|
|||
fi
|
||||
}
|
||||
|
||||
COMPATIBLE_MACHINE = "(ccimx6|ccimx8m|ccmp1)"
|
||||
COMPATIBLE_MACHINE = "(ccimx6$|ccimx8m|ccmp1)"
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
# Copyright (C) 2024, Digi International Inc.
|
||||
# Copyright (C) 2024,2025 Digi International Inc.
|
||||
|
||||
require recipes-kernel/linux/linux-dey.inc
|
||||
|
||||
|
|
|
|||
|
|
@ -1,27 +1,28 @@
|
|||
# short-description: Create SD card image with a boot partition (1GB)
|
||||
# long-description: Creates a partitioned SD card image (1GB)
|
||||
# short-description: Create SD card image with a boot partition (2GB)
|
||||
# long-description: Creates a partitioned SD card image (2GB)
|
||||
#
|
||||
# - -------- ------------- ------ ------ ------------ -------- --------- ------------------------
|
||||
# | | TFA(2) | Metadata(2) | FIPA | FIPB | U-BOOT ENV | linux | rootfs | safe | safe2 | data |
|
||||
# - -------- ------------- ------ ------ ------------ -------- --------- ------------------------
|
||||
# ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
|
||||
# | | | | | | | | | | | |
|
||||
# 0 17kB 542kB 1.06MB 5.26MB 9.45MB 9.97MB 77.1MB 898MB 1032MB
|
||||
# - -------- ------------- ------ ------ ------------ -------- ---------- --------- ------
|
||||
# | | TFA(2) | Metadata(2) | FIPA | FIPB | U-BOOT ENV | linux | rootfs | safe(2) | data |
|
||||
# - -------- ------------- ------ ------ ------------ -------- ---------- ----------------
|
||||
# ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
|
||||
# | | | | | | | | | | |
|
||||
# 0 17kB 542kB 1.06MB 5.26MB 9.45MB 9.97MB 77.1MB 1577.1MB 1578MB 1706MB
|
||||
#
|
||||
# Warning: the first stage of boot (here fsbl1, fsbl2, metadata1, metadata2, fipa, fipb) MUST be on GPT partition to be detected.
|
||||
#
|
||||
|
||||
# FSBL partitions aka TF-A BL2
|
||||
part fsbla1 --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=fsbla1 --sourceparams="file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware/tf-a-${MACHINE}-sdcard.stm32" --ondisk mmcblk --part-type 0x8301 --fixed-size 256K --align 17
|
||||
part fsbla2 --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=fsbla2 --sourceparams="file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware/tf-a-${MACHINE}-sdcard.stm32" --ondisk mmcblk --part-type 0x8301 --fixed-size 256K
|
||||
part fsbla1 --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=fsbla1 --sourceparams="file=${DEPLOY_DIR_IMAGE}/tf-a-${MACHINE}-optee-sdcard.stm32" --ondisk mmcblk --part-type 0x8301 --fixed-size 256K --align 17
|
||||
part fsbla2 --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=fsbla2 --sourceparams="file=${DEPLOY_DIR_IMAGE}/tf-a-${MACHINE}-optee-sdcard.stm32" --ondisk mmcblk --part-type 0x8301 --fixed-size 256K
|
||||
|
||||
# Metadata partitions
|
||||
part metadata1 --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=metadata1 --sourceparams="file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware/metadata.bin" --ondisk mmcblk --part-type 0x8301 --fixed-size 256K
|
||||
part metadata2 --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=metadata2 --sourceparams="file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware/metadata.bin" --ondisk mmcblk --part-type 0x8301 --fixed-size 256K
|
||||
part metadata1 --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=metadata1 --sourceparams="file=${DEPLOY_DIR_IMAGE}/metadata-${MACHINE}.bin" --ondisk mmcblk --part-type 0x8301 --fixed-size 256K
|
||||
part metadata2 --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=metadata2 --sourceparams="file=${DEPLOY_DIR_IMAGE}/metadata-${MACHINE}.bin" --ondisk mmcblk --part-type 0x8301 --fixed-size 256K
|
||||
|
||||
# Fip partitions
|
||||
part fip-a --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=fip-a --sourceparams="file=${DEPLOY_DIR_IMAGE}/fip/fip-${MACHINE}-optee.bin" --ondisk mmcblk --part-type 19d5df83-11b0-457b-be2c-7559c13142a5 --fixed-size 4096K --uuid 4fd84c93-54ef-463f-a7ef-ae25ff887087
|
||||
part fip-b --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=fip-b --sourceparams="file=${DEPLOY_DIR_IMAGE}/fip/fip-${MACHINE}-optee.bin" --ondisk mmcblk --part-type 19d5df83-11b0-457b-be2c-7559c13142a5 --fixed-size 4096K --uuid 09c54952-d5bf-45af-acee-335303766fb3
|
||||
part fip-a --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=fip-a --sourceparams="file=${DEPLOY_DIR_IMAGE}/fip-${MACHINE}-optee-sdcard.bin" --ondisk mmcblk --part-type ${DEVICE_TYPEUUID_FIP} --fixed-size 4096K --uuid ${DEVICE_PARTUUID_FIP_A}
|
||||
part fip-b --source rawcopy --fstype=ext4 --fsoptions "noauto" --part-name=fip-b --sourceparams="file=${DEPLOY_DIR_IMAGE}/fip-${MACHINE}-optee-sdcard.bin" --ondisk mmcblk --part-type ${DEVICE_TYPEUUID_FIP} --fixed-size 4096K --uuid ${DEVICE_PARTUUID_FIP_B}
|
||||
|
||||
# U-BOOT env
|
||||
part u-boot-env --source empty --part-name=uboot-env --ondisk mmcblk --part-type 0x8301 --fixed-size 512K
|
||||
|
|
@ -30,7 +31,7 @@ part u-boot-env --source empty --part-name=uboot-env --ondisk mmcblk --part-type
|
|||
part --source rawcopy --sourceparams="file=${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.boot.vfat" --ondisk mmcblk --fstype=vfat --part-name=linux --active --fixed-size 64M
|
||||
|
||||
# Rootfs
|
||||
part / --source rootfs --ondisk mmcblk --fstype=ext4 --label rootfs --fixed-size 783M --uuid e91c4e10-16e6-4c0e-bd0e-77becf4a3582 --part-name=rootfs
|
||||
part / --source rootfs --ondisk mmcblk --fstype=ext4 --label rootfs --fixed-size 1500M --uuid e91c4e10-16e6-4c0e-bd0e-77becf4a3582 --part-name=rootfs
|
||||
|
||||
# Safe
|
||||
part safe --source empty --ondisk mmcblk --fsoptions "noauto" --part-name=safe --part-type 0x8301 --fixed-size 256K
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ require include/time64.inc
|
|||
YOCTO_MAJOR = "5"
|
||||
YOCTO_MINOR = "0"
|
||||
DEY_RELEASE = "1"
|
||||
DEY_BUILD = "1"
|
||||
DEY_BUILD = "3"
|
||||
|
||||
# Firmware version of the system.
|
||||
DEY_FIRMWARE_VERSION ?= "${YOCTO_MAJOR}.${YOCTO_MINOR}.${DEY_RELEASE}.${DEY_BUILD}"
|
||||
|
|
@ -44,7 +44,6 @@ INITRAMFS_IMAGE = '${@bb.utils.contains("KERNEL_IMAGETYPE", "fitImage", "${RECOV
|
|||
# DEY image features (alphabetical order)
|
||||
FEATURE_PACKAGES_dey-audio = "packagegroup-dey-audio"
|
||||
FEATURE_PACKAGES_dey-bluetooth = "packagegroup-dey-bluetooth"
|
||||
FEATURE_PACKAGES_dey-crank = "packagegroup-dey-crank"
|
||||
FEATURE_PACKAGES_dey-debug = "packagegroup-dey-debug"
|
||||
FEATURE_PACKAGES_dey-examples = "packagegroup-dey-examples"
|
||||
FEATURE_PACKAGES_dey-gstreamer = "packagegroup-dey-gstreamer"
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ MACHINE_GSTREAMER_1_0_PKGS:ccimx6ul = " \
|
|||
gstreamer1.0-plugins-base-typefindfunctions \
|
||||
gstreamer1.0-plugins-base-videoconvertscale \
|
||||
gstreamer1.0-plugins-base-volume \
|
||||
gstreamer1.0-plugins-good-autodetect \
|
||||
gstreamer1.0-plugins-good-pulseaudio \
|
||||
gstreamer1.0-plugins-good-video4linux2 \
|
||||
gstreamer1.0-plugins-good-videofilter \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,29 @@
|
|||
From: Isaac Hermida <isaac.hermida@digi.com>
|
||||
Date: Tue, 25 Feb 2025 12:32:45 +0000
|
||||
Subject: [PATCH] use local copy of ssd_mobilenet_v1_quant model
|
||||
|
||||
This model is broken, and the Vela conversion is failing.
|
||||
Until it is fixed, use a locally working copy.
|
||||
|
||||
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
|
||||
---
|
||||
download_models.py | 6 +++---
|
||||
1 file changed, 3 insertions(+), 3 deletions(-)
|
||||
|
||||
diff --git a/download_models.py b/download_models.py
|
||||
index ba1cce726e25..411538a19662 100644
|
||||
--- a/download_models.py
|
||||
+++ b/download_models.py
|
||||
@@ -67,9 +67,9 @@ def download_all_models(model_dir, vela_dir):
|
||||
|
||||
#Download object detection model
|
||||
#https://www.tensorflow.org/
|
||||
- url = 'https://storage.googleapis.com/tfhub-lite-models/tensorflow/lite-model/ssd_mobilenet_v1/1/metadata/2.tflite'
|
||||
- path = os.path.join(model_dir, 'ssd_mobilenet_v1_quant.tflite')
|
||||
- download_file('object detection', url, path)
|
||||
+ # url = 'https://storage.googleapis.com/tfhub-lite-models/tensorflow/lite-model/ssd_mobilenet_v1/1/metadata/2.tflite'
|
||||
+ # path = os.path.join(model_dir, 'ssd_mobilenet_v1_quant.tflite')
|
||||
+ # download_file('object detection', url, path)
|
||||
|
||||
#Download image classification model
|
||||
#https://www.tensorflow.org/
|
||||
Binary file not shown.
Binary file not shown.
|
|
@ -1,4 +1,4 @@
|
|||
# Copyright (C) 2024, Digi International Inc.
|
||||
# Copyright (C) 2024,2025, Digi International Inc.
|
||||
|
||||
FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
|
||||
|
||||
|
|
@ -12,6 +12,9 @@ SRC_URI += " \
|
|||
file://0001-Customize-EiQ-demos.patch \
|
||||
file://0002-improvements-capture-x-windows-and-increase-resoluti.patch \
|
||||
file://0003-check-vela-return-code.patch \
|
||||
file://0004-use-local-copy-of-ssd_mobilenet_v1_quant-model.patch \
|
||||
file://ssd_mobilenet_v1_quant.tflite \
|
||||
file://ssd_mobilenet_v1_quant_vela.tflite \
|
||||
file://scripts/launch_eiq_demo.sh \
|
||||
file://service/eiqdemo.service \
|
||||
"
|
||||
|
|
@ -43,12 +46,14 @@ do_install () {
|
|||
for archive in "${S}/${MODELS_DIR}"/*.tflite; do
|
||||
cp "${archive}" "${D}${bindir}/${PN}-${PV}/${MODELS_DIR}"
|
||||
done
|
||||
cp ${WORKDIR}/ssd_mobilenet_v1_quant.tflite "${D}${bindir}/${PN}-${PV}/${MODELS_DIR}"
|
||||
|
||||
# Install the transformed Vela models.
|
||||
install -d "${D}${bindir}/${PN}-${PV}/${VELA_MODELS_DIR}"
|
||||
for archive in "${S}/${VELA_MODELS_DIR}"/*.tflite; do
|
||||
cp "${archive}" "${D}${bindir}/${PN}-${PV}/${VELA_MODELS_DIR}"
|
||||
done
|
||||
cp ${WORKDIR}/ssd_mobilenet_v1_quant_vela.tflite "${D}${bindir}/${PN}-${PV}/${VELA_MODELS_DIR}"
|
||||
|
||||
# Install the launch script.
|
||||
install -d ${D}${sysconfdir}/demos/scripts
|
||||
|
|
|
|||
|
|
@ -1,13 +0,0 @@
|
|||
# Copyright (C) 2022,2023, Digi International Inc.
|
||||
|
||||
require dey-image-graphical.inc
|
||||
|
||||
DESCRIPTION = "DEY image including Crank Storyboard engine and demo packages"
|
||||
|
||||
GRAPHICAL_CORE = "crank"
|
||||
|
||||
# Remove X11 image features
|
||||
IMAGE_FEATURES:remove:ccimx6ul = "x11-base x11-sato"
|
||||
|
||||
# Reduce the rootfs size to fit in the internal storage
|
||||
IMAGE_FEATURES:remove:ccmp15 = "dey-gstreamer"
|
||||
|
|
@ -1,120 +0,0 @@
|
|||
#!/bin/sh
|
||||
#===============================================================================
|
||||
#
|
||||
# Copyright (C) 2022, 2023 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
# under the terms of the GNU General Public License version 2 as published by
|
||||
# the Free Software Foundation.
|
||||
#
|
||||
#
|
||||
# !Description: Initialize Crank demo
|
||||
#
|
||||
#===============================================================================
|
||||
|
||||
readonly DEMO="##CRANK_DEMO_PATH##"
|
||||
readonly DEMO_DISPLAY="##CRANK_DEMO_DISPLAY##"
|
||||
readonly DEMO_OPTS="##CRANK_DEMO_OPTIONS##"
|
||||
readonly DEMO_ENV="##CRANK_DEMO_ENV##"
|
||||
readonly SB_LAUNCHER="sb-launcher"
|
||||
readonly SB_LAUNCHER_SCRIPT="/usr/bin/${SB_LAUNCHER}"
|
||||
readonly CRANK_DEMO="crank-demo"
|
||||
readonly PID_FILE="/run/${CRANK_DEMO}.pid"
|
||||
|
||||
[ -f "/etc/profile.d/tslib.sh" ] && . /etc/profile.d/tslib.sh
|
||||
|
||||
log() {
|
||||
if type "systemd-cat" >/dev/null 2>/dev/null; then
|
||||
systemd-cat -p "${1}" -t "${CRANK_DEMO}" printf "%s" "${2}"
|
||||
fi
|
||||
logger -p "${1}" -t "${CRANK_DEMO}" "${2}"
|
||||
}
|
||||
|
||||
get_crank_demo_pid() {
|
||||
local pid="$(pgrep -f ${DEMO})"
|
||||
|
||||
[ -n "${pid}" ] && { echo "${pid}"; return 0; }
|
||||
|
||||
return 1
|
||||
}
|
||||
|
||||
check_is_running() {
|
||||
local pid
|
||||
|
||||
if [ -s "${PID_FILE}" ]; then
|
||||
pid="$(cat ${PID_FILE})"
|
||||
else
|
||||
pid="$(get_crank_demo_pid)"
|
||||
echo "${pid}" > ${PID_FILE}
|
||||
fi
|
||||
|
||||
if [ "${pid}" ]; then
|
||||
kill -0 "${pid}" >/dev/null 2>&1 && return 0
|
||||
fi
|
||||
|
||||
rm -f "${PID_FILE}"
|
||||
|
||||
return 1
|
||||
}
|
||||
|
||||
wait_for_wayland() {
|
||||
local count=20
|
||||
local wayland_socket="/run/user/0/${DEMO_DISPLAY}"
|
||||
|
||||
while [ ! -S "${wayland_socket}" ]; do
|
||||
sleep 1
|
||||
count=$((count-1))
|
||||
if [ "${count}" = 0 ]; then
|
||||
return 1
|
||||
fi
|
||||
done
|
||||
return 0
|
||||
}
|
||||
|
||||
stop() {
|
||||
check_is_running || return
|
||||
|
||||
local pid="$(cat ${PID_FILE})"
|
||||
kill -TERM "${pid}" >/dev/null 2>&1
|
||||
|
||||
local STOP_TIMEOUT="5"
|
||||
for i in $(seq ${STOP_TIMEOUT}); do
|
||||
check_is_running || { log info "stopped"; break; }
|
||||
if [ "${i}" -eq ${STOP_TIMEOUT} ]; then
|
||||
log warning "stop: ${CRANK_DEMO} did not stop gracefully"
|
||||
kill -KILL "${pid}" >/dev/null 2>&1
|
||||
fi
|
||||
sleep 1
|
||||
done
|
||||
}
|
||||
|
||||
start() {
|
||||
check_is_running && { log warning "start: ${CRANK_DEMO} ALREADY running"; exit 0; }
|
||||
|
||||
[ -d "/usr/share/wayland" ] && wait_for_wayland
|
||||
env ${DEMO_ENV} ${SB_LAUNCHER_SCRIPT} ${DEMO_OPTS} ${DEMO} >/dev/null 2>&1 &
|
||||
if [ $? -eq 0 ]; then
|
||||
echo $! > ${PID_FILE}
|
||||
log info "$(cat ${PID_FILE})"
|
||||
log info "started"
|
||||
fi
|
||||
}
|
||||
|
||||
case "$1" in
|
||||
start)
|
||||
start
|
||||
;;
|
||||
stop)
|
||||
stop
|
||||
;;
|
||||
restart)
|
||||
stop
|
||||
sleep 1
|
||||
start
|
||||
;;
|
||||
*)
|
||||
echo "Usage: $0 {start|stop|restart}"
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
|
|
@ -1,16 +0,0 @@
|
|||
[Unit]
|
||||
Description=Crank Software demo
|
||||
Documentation=https://www.cranksoftware.com/
|
||||
|
||||
# Make sure we are started after graphic service is available
|
||||
After=##WESTON_SERVICE##
|
||||
Requires=##WESTON_SERVICE##
|
||||
|
||||
[Service]
|
||||
Type=forking
|
||||
PIDFile=/run/crank-demo.pid
|
||||
ExecStart=/etc/crank-demo start
|
||||
ExecStop=/etc/crank-demo stop
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
|
|
@ -1,98 +0,0 @@
|
|||
# Copyright (C) 2022-2024, Digi International Inc.
|
||||
|
||||
SUMMARY = "Crank Demo"
|
||||
HOMEPAGE = "https://www.cranksoftware.com/"
|
||||
LICENSE = "CLOSED"
|
||||
|
||||
DEPENDS = "crank-sbengine"
|
||||
|
||||
SRC_URI = " \
|
||||
http:///not/exist/crank-demos-${PV}.tar.gz \
|
||||
file://crank-demo.service \
|
||||
file://crank-demo-init \
|
||||
"
|
||||
SRC_URI[sha256sum] = "90a7fc258cdaa5f9afcf57224da8bbc5a330b957db88335f555369123a1432ab"
|
||||
|
||||
WESTON_SERVICE ?= "weston.service"
|
||||
WESTON_SERVICE:ccmp15 ?= "weston-launch.service"
|
||||
|
||||
CRANK_DEMOS_TARBALL_PATH ?= ""
|
||||
CRANK_DEMO_ENV ?= "DISPLAY=:0.0 XDG_RUNTIME_DIR=/run/user/0 WAYLAND_DISPLAY=\$\{DEMO_DISPLAY\}"
|
||||
CRANK_DEMO_ENV:ccimx6ul ?= ""
|
||||
CRANK_DEMO_OPTIONS ?= "-orender_mgr,multisample=0"
|
||||
CRANK_DEMO_OPTIONS:ccimx6ul ?= "-orender_mgr,multisample=0 -odev-input,mouse=/dev/input/mouse0 -oscreen_mgr,swcursor"
|
||||
CRANK_DEMO_PATH ?= "${datadir}/crank/apps/OpenGL_WideScreen/1280x720.gapp"
|
||||
|
||||
# The tarball is only available for downloading after registration, so provide
|
||||
# a PREMIRROR to a local directory that can be configured in the project's
|
||||
# local.conf file using CRANK_DEMOS_TARBALL_PATH variable.
|
||||
python() {
|
||||
crank_demos_tarball_path = d.getVar('CRANK_DEMOS_TARBALL_PATH')
|
||||
if crank_demos_tarball_path:
|
||||
premirrors = d.getVar('PREMIRRORS')
|
||||
d.setVar('PREMIRRORS', "http:///not/exist/crank-demos-.* %s \\n %s" % (crank_demos_tarball_path, premirrors))
|
||||
crank_demos_tarball_sha256 = d.getVar('CRANK_DEMOS_TARBALL_SHA256')
|
||||
if crank_demos_tarball_sha256:
|
||||
d.setVarFlag("SRC_URI", "sha256sum", crank_demos_tarball_sha256)
|
||||
}
|
||||
|
||||
inherit systemd update-rc.d
|
||||
|
||||
# Disable tasks not needed for the binary package
|
||||
do_configure[noexec] = "1"
|
||||
|
||||
do_compile () {
|
||||
for f in ${S}/*; do
|
||||
if [ -d "${f}/source_code" ]; then
|
||||
oe_runmake -C "${f}/source_code"
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
do_install () {
|
||||
install -d -m 0755 ${D}${datadir}/crank/apps
|
||||
|
||||
# Install Crank demos
|
||||
tar --no-same-owner --exclude='EULA.pdf' --exclude='*/source_code' -cpf - -C ${S} . \
|
||||
| tar --no-same-owner -xpf - -C ${D}${datadir}/crank/apps
|
||||
|
||||
# Install required binaries
|
||||
for f in ${S}/*; do
|
||||
if [ -d "${f}/source_code" ]; then
|
||||
oe_runmake DESTDIR=${D}${datadir}/crank/apps/$(basename ${f}) -C "${f}/source_code" install
|
||||
fi
|
||||
done
|
||||
|
||||
# Install systemd service
|
||||
if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
|
||||
# Install systemd unit files
|
||||
install -d ${D}${systemd_unitdir}/system
|
||||
install -m 0644 ${WORKDIR}/crank-demo.service ${D}${systemd_unitdir}/system/
|
||||
sed -i -e "s,##WESTON_SERVICE##,${WESTON_SERVICE},g" \
|
||||
"${D}${systemd_unitdir}/system/crank-demo.service"
|
||||
fi
|
||||
|
||||
# Install wrapper bootscript to launch Crank demo on boot
|
||||
install -d ${D}${sysconfdir}/init.d
|
||||
install -m 0755 ${WORKDIR}/crank-demo-init ${D}${sysconfdir}/crank-demo
|
||||
sed -i -e "s@##CRANK_DEMO_PATH##@${CRANK_DEMO_PATH}@g" \
|
||||
-e "s@##CRANK_DEMO_OPTIONS##@${CRANK_DEMO_OPTIONS}@g" \
|
||||
-e "s@##CRANK_DEMO_ENV##@${CRANK_DEMO_ENV}@g" \
|
||||
-e "s@##CRANK_DEMO_DISPLAY##@${WAYLAND_DISPLAY}@g" \
|
||||
"${D}${sysconfdir}/crank-demo"
|
||||
ln -sf ${sysconfdir}/crank-demo ${D}${sysconfdir}/init.d/crank-demo
|
||||
}
|
||||
|
||||
FILES:${PN} = " \
|
||||
${datadir}/crank/apps/* \
|
||||
${sysconfdir}/crank-demo \
|
||||
${sysconfdir}/init.d/crank-demo \
|
||||
${systemd_unitdir}/system/crank-demo.service \
|
||||
"
|
||||
|
||||
INITSCRIPT_NAME = "crank-demo"
|
||||
INITSCRIPT_PARAMS = "defaults 90 10"
|
||||
|
||||
SYSTEMD_SERVICE:${PN} = "crank-demo.service"
|
||||
|
||||
RDEPENDS:${PN} += "crank-sbengine"
|
||||
|
|
@ -1,5 +0,0 @@
|
|||
#!/bin/sh
|
||||
|
||||
ENGINE="/usr/share/crank/sbengine"
|
||||
|
||||
exec env LD_LIBRARY_PATH=${ENGINE}/lib SB_PLUGINS=${ENGINE}/plugins ${ENGINE}/bin/sbengine "$@"
|
||||
|
|
@ -1,98 +0,0 @@
|
|||
# Copyright (C) 2022, Digi International Inc.
|
||||
|
||||
SUMMARY = "Crank Storyboard Engine"
|
||||
HOMEPAGE = "https://www.cranksoftware.com/"
|
||||
LICENSE = "CLOSED"
|
||||
|
||||
SBENGINE_NAME:ccimx6ul = "linux-imx6yocto-armle-swrender-obj"
|
||||
SBENGINE_NAME:ccimx6 = "linux-imx6yocto-armle-opengles_2.0-obj"
|
||||
SBENGINE_NAME:ccimx8m = "linux-imx8yocto-armle-opengles_2.0-wayland-obj"
|
||||
SBENGINE_NAME:ccimx8x = "linux-imx8yocto-armle-opengles_2.0-wayland-obj"
|
||||
SBENGINE_NAME:ccmp15 = "linux-stmA5-armle-opengles_2.0-wayland-obj"
|
||||
|
||||
SRC_URI = " \
|
||||
http:///not/exist/crank-sbengine-${PV}.tar.gz \
|
||||
file://sb-launcher \
|
||||
"
|
||||
SRC_URI[sha256sum] = "79c9162c401dd6282321361d51f15ccef1608da7cde9030c2b72b9573e826056"
|
||||
|
||||
CRANK_ENGINE_TARBALL_PATH ?= ""
|
||||
|
||||
# The tarball is only available for downloading after registration, so provide
|
||||
# a PREMIRROR to a local directory that can be configured in the project's
|
||||
# local.conf file using CRANK_ENGINE_TARBALL_PATH variable.
|
||||
python() {
|
||||
crank_engine_tarball_path = d.getVar('CRANK_ENGINE_TARBALL_PATH')
|
||||
if crank_engine_tarball_path:
|
||||
premirrors = d.getVar('PREMIRRORS')
|
||||
d.setVar('PREMIRRORS', "http:///not/exist/crank-sbengine-.* %s \\n %s" % (crank_engine_tarball_path, premirrors))
|
||||
crank_engine_tarball_sha256 = d.getVar('CRANK_ENGINE_TARBALL_SHA256')
|
||||
if crank_engine_tarball_sha256:
|
||||
d.setVarFlag("SRC_URI", "sha256sum", crank_engine_tarball_sha256)
|
||||
}
|
||||
|
||||
# Disable tasks not needed for the binary package
|
||||
do_configure[noexec] = "1"
|
||||
do_compile[noexec] = "1"
|
||||
|
||||
do_install () {
|
||||
# Install launcher script
|
||||
install -d -m 0755 ${D}${bindir}
|
||||
install -m 0755 ${WORKDIR}/sb-launcher ${D}${bindir}/sb-launcher
|
||||
|
||||
# Copy the engine
|
||||
install -d -m 0755 ${D}${datadir}/crank/sbengine
|
||||
cp -drf ${S}/${SBENGINE_NAME}/* ${D}${datadir}/crank/sbengine
|
||||
chmod a+rx ${D}${datadir}/crank/sbengine/*
|
||||
}
|
||||
|
||||
FILES:${PN} = " \
|
||||
${bindir}/* \
|
||||
${datadir}/crank/sbengine/* \
|
||||
"
|
||||
FILES:${PN}-staticdev += " ${datadir}/crank/sbengine/lib/libgreio.a"
|
||||
|
||||
#
|
||||
# Disable failing QA checks:
|
||||
#
|
||||
# Libraries inside /usr/share (datadir)
|
||||
# ELF binaries has relocations in .text
|
||||
#
|
||||
INSANE_SKIP:${PN} += "libdir textrel"
|
||||
INSANE_SKIP:${PN}-dbg += "libdir"
|
||||
|
||||
RDEPENDS:${PN} = " \
|
||||
alsa-lib \
|
||||
glib-2.0 \
|
||||
gstreamer1.0 \
|
||||
libgstapp-1.0 \
|
||||
libxml2 \
|
||||
zlib \
|
||||
"
|
||||
RDEPENDS:${PN}:append:ccimx6ul = " \
|
||||
mtdev \
|
||||
tslib \
|
||||
"
|
||||
RDEPENDS:${PN}:append:ccimx8m = " \
|
||||
libegl-imx \
|
||||
libgles2-imx \
|
||||
wayland \
|
||||
"
|
||||
RDEPENDS:${PN}:append:ccimx8x = " \
|
||||
libegl-imx \
|
||||
libgles2-imx \
|
||||
wayland \
|
||||
"
|
||||
RDEPENDS:${PN}:append:ccimx6 = " \
|
||||
libegl-imx \
|
||||
libgles2-imx \
|
||||
mtdev \
|
||||
tslib \
|
||||
"
|
||||
RDEPENDS:${PN}:append:ccmp15 = " \
|
||||
libegl-gcnano \
|
||||
libgles2-gcnano \
|
||||
wayland \
|
||||
"
|
||||
|
||||
PACKAGE_ARCH = "${MACHINE_ARCH}"
|
||||
|
|
@ -1,13 +0,0 @@
|
|||
#
|
||||
# Copyright (C) 2022, Digi International Inc.
|
||||
#
|
||||
SUMMARY = "Crank packagegroup for DEY image"
|
||||
|
||||
PACKAGE_ARCH = "${MACHINE_ARCH}"
|
||||
inherit packagegroup
|
||||
|
||||
# Include Crank engine and demos
|
||||
RDEPENDS:${PN} += " \
|
||||
crank-demos \
|
||||
crank-sbengine \
|
||||
"
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# Copyright (C) 2017-2024, Digi International Inc.
|
||||
# Copyright (C) 2017-2025, Digi International Inc.
|
||||
|
||||
SUMMARY = "Digi's ConnectCore Cloud services"
|
||||
SECTION = "libs"
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
# Copyright (C) 2019-2022, Digi International Inc.
|
||||
# Copyright (C) 2019-2025, Digi International Inc.
|
||||
|
||||
SRCBRANCH = "master"
|
||||
SRCREV = "${AUTOREV}"
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
# Copyright (C) 2017-2022, Digi International Inc.
|
||||
# Copyright (C) 2017-2025, Digi International Inc.
|
||||
|
||||
SUMMARY = "Digi APIX library"
|
||||
DESCRIPTION = "C library to access and manage your ConnectCore platform interfaces in an easy manner"
|
||||
|
|
|
|||
|
|
@ -1,8 +0,0 @@
|
|||
# Copyright (C) 2022, Digi International Inc.
|
||||
|
||||
require swu.inc
|
||||
|
||||
# Remove X11 image features
|
||||
IMAGE_FEATURES:remove:ccimx6ul = "x11-base x11-sato"
|
||||
|
||||
IMG_NAME = "${@get_baseimg_pn(d)}-${GRAPHICAL_BACKEND}"
|
||||
|
|
@ -105,7 +105,6 @@ purge_sstate() {
|
|||
packagegroup-dey-audio \
|
||||
packagegroup-dey-bluetooth \
|
||||
packagegroup-dey-core \
|
||||
packagegroup-dey-crank \
|
||||
packagegroup-dey-debug \
|
||||
packagegroup-dey-examples \
|
||||
packagegroup-dey-gstreamer \
|
||||
|
|
|
|||
11
sdk/build.sh
11
sdk/build.sh
|
|
@ -115,7 +115,6 @@ purge_sstate() {
|
|||
packagegroup-dey-audio \
|
||||
packagegroup-dey-bluetooth \
|
||||
packagegroup-dey-core \
|
||||
packagegroup-dey-crank \
|
||||
packagegroup-dey-debug \
|
||||
packagegroup-dey-examples \
|
||||
packagegroup-dey-gstreamer \
|
||||
|
|
@ -172,17 +171,17 @@ while read -r _pl _tgt; do
|
|||
# the fly with underscores.
|
||||
eval "${_pl//-/_}_tgt=\"${_tgt//,/ }\""
|
||||
done<<-_EOF_
|
||||
ccimx8mm-dvk dey-image-qt,dey-image-crank,dey-image-webkit,dey-image-lvgl
|
||||
ccimx8mn-dvk dey-image-qt,dey-image-crank,dey-image-webkit,dey-image-lvgl
|
||||
ccimx8x-sbc-pro dey-image-qt,dey-image-crank,dey-image-webkit,dey-image-lvgl
|
||||
ccimx8mm-dvk dey-image-qt,dey-image-webkit,dey-image-lvgl
|
||||
ccimx8mn-dvk dey-image-qt,dey-image-webkit,dey-image-lvgl
|
||||
ccimx8x-sbc-pro dey-image-qt,dey-image-webkit,dey-image-lvgl
|
||||
ccimx8x-sbc-express dey-image-qt
|
||||
ccimx6qpsbc dey-image-qt,dey-image-webkit,dey-image-lvgl
|
||||
ccimx6sbc dey-image-qt,dey-image-webkit,dey-image-lvgl
|
||||
ccimx6ulsbc core-image-base,dey-image-qt,dey-image-crank,dey-image-lvgl
|
||||
ccimx6ulsbc core-image-base,dey-image-qt,dey-image-lvgl
|
||||
ccimx6ulstarter core-image-base
|
||||
ccimx6ulsom dey-image-mft-module-min
|
||||
ccimx6ulrftest dey-image-mft-module-rf
|
||||
ccmp15-dvk dey-image-qt,dey-image-crank,dey-image-webkit,dey-image-lvgl
|
||||
ccmp15-dvk dey-image-qt,dey-image-webkit,dey-image-lvgl
|
||||
ccmp13-dvk core-image-base
|
||||
ccmp25-dvk dey-image-qt,dey-image-webkit,dey-image-lvgl
|
||||
ccimx91-dvk core-image-base
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@ MKP_NONE="\033[0m"
|
|||
MKP_CONFIGPATH="${MKP_SCRIPTPATH}/sources/meta-digi/meta-digi-arm/conf/templates"
|
||||
|
||||
# Blacklist platforms (not officially supported in a DEY release)
|
||||
MKP_BLACKLIST_PLATFORMS=""
|
||||
MKP_BLACKLIST_PLATFORMS="ccimx6qpsbc ccimx6sbc ccimx8mm-dvk ccimx8mn-dvk ccimx8x-sbc-express ccmp13-dvk ccmp15-dvk"
|
||||
|
||||
MKP_SETUP_ENVIRONMENT='#!/bin/bash
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue