From 577302650dc9e497f39be3b386dfe5529cc9fcde Mon Sep 17 00:00:00 2001 From: Gabriel Valcazar Date: Wed, 17 Oct 2018 13:58:32 +0200 Subject: [PATCH] imx-boot: remove DCD patches These patches were originally introduced in the recipe because the DCD files were needed by mkimage to create the final imx-boot binaries. Now they are in the SCFW source code instead. https://jira.digi.com/browse/DEL-6158 Signed-off-by: Gabriel Valcazar --- ...-DCD-for-the-2GB-variant-of-the-cc8x.patch | 315 ------------------ .../recipes-bsp/imx-mkimage/imx-boot_0.2.bb | 5 - 2 files changed, 320 deletions(-) delete mode 100644 meta-digi-arm/recipes-bsp/imx-mkimage/files/0002-cc8x-add-second-DCD-for-the-2GB-variant-of-the-cc8x.patch diff --git a/meta-digi-arm/recipes-bsp/imx-mkimage/files/0002-cc8x-add-second-DCD-for-the-2GB-variant-of-the-cc8x.patch b/meta-digi-arm/recipes-bsp/imx-mkimage/files/0002-cc8x-add-second-DCD-for-the-2GB-variant-of-the-cc8x.patch deleted file mode 100644 index da34c8e21..000000000 --- a/meta-digi-arm/recipes-bsp/imx-mkimage/files/0002-cc8x-add-second-DCD-for-the-2GB-variant-of-the-cc8x.patch +++ /dev/null @@ -1,315 +0,0 @@ -From: Gabriel Valcazar -Date: Fri, 27 Jul 2018 12:50:37 +0200 -Subject: [PATCH 2/2] cc8x: add second DCD for the 2GB variant of the cc8x - -This DCD is the same as the one used for the 1GB variant, but with minor timing -and indexing changes. - -Also, suffix each DCD with their corresponding UBOOT_CONFIG values so the -imx-boot recipe is able to handle them. - -https://jira.digi.com/browse/DEL-6085 - -Signed-off-by: Gabriel Valcazar -Signed-off-by: Arturo Buzarra ---- - ...d_1.2GHz.cfg => imx8qx_dcd_1.2GHz.cfg-1GB} | 0 - iMX8QX/imx8qx_dcd_1.2GHz.cfg-2GB | 284 ++++++++++++++++++ - 2 files changed, 284 insertions(+) - rename iMX8QX/{imx8qx_dcd_1.2GHz.cfg => imx8qx_dcd_1.2GHz.cfg-1GB} (100%) - create mode 100644 iMX8QX/imx8qx_dcd_1.2GHz.cfg-2GB - -diff --git a/iMX8QX/imx8qx_dcd_1.2GHz.cfg b/iMX8QX/imx8qx_dcd_1.2GHz.cfg-1GB -similarity index 100% -rename from iMX8QX/imx8qx_dcd_1.2GHz.cfg -rename to iMX8QX/imx8qx_dcd_1.2GHz.cfg-1GB -diff --git a/iMX8QX/imx8qx_dcd_1.2GHz.cfg-2GB b/iMX8QX/imx8qx_dcd_1.2GHz.cfg-2GB -new file mode 100644 -index 0000000..bb37fd5 ---- /dev/null -+++ b/iMX8QX/imx8qx_dcd_1.2GHz.cfg-2GB -@@ -0,0 +1,284 @@ -+#define __ASSEMBLY__ -+ -+#include -+#include -+ -+/* -+ * Device Configuration Data (DCD) -+ * -+ * Each entry must have the format: -+ * Addr-type Address Value -+ * -+ * where: -+ * Addr-type register length (1,2 or 4 bytes) -+ * Address absolute address of the register -+ * value value to be stored in the register -+ */ -+ -+#ifndef SCFW_DCD -+/* For 1200MHz DDR, DRC 600MHz operation */ -+DATA 4 0xff190000 0x00000CC8 /* DRC0 bringup */ -+#else -+/* Set the DRC rate to 600MHz, the PHY PLL will double this for the DRAM rate. */ -+uint32_t rate2 = SC_600MHZ; -+pm_set_clock_rate(SC_PT, SC_R_DRC_0, SC_PM_CLK_MISC0, &rate2); -+#endif -+ -+DATA 4 0x41C80208 0x1 -+DATA 4 0x41C80040 0xb -+DATA 4 0x41C80204 0x1 -+ -+/* DRAM 0 controller configuration begin */ -+DATA 4 DDRC_MSTR_0 0xC1080020 // Set LPDDR4, BL = 16 and active ranks -+DATA 4 DDRC_DERATEEN_0 0x00000203 // derate enable, derate values, byte to read MRR data -+DATA 4 DDRC_DERATEINT_0 0x0124F800 // derate MR4 interval read -+DATA 4 DDRC_RFSHTMG_0 0x004900A8 // tREFI, tRFC -+DATA 4 DDRC_INIT0_0 0x40030495 // pre_cke = 2ms, post_cke = 2us -+DATA 4 DDRC_INIT1_0 0x00770000 // dram_rstn = 200us -+DATA 4 DDRC_INIT3_0 0x00440024 // MR1, MR2 -+DATA 4 DDRC_INIT4_0 0x00F10000 // MR3, MR13 -+DATA 4 DDRC_RANKCTL_0 0x0000066F // diff_rank_wr_gap, diff_rank_rd_gap, max_rank_rd -+DATA 4 DDRC_DRAMTMG0_0 0x1618141A // wr2pr, tFAW, tRASmax, tRASmin -+DATA 4 DDRC_DRAMTMG1_0 0x00050526 // tXP, rd2pre, tRC -+DATA 4 DDRC_DRAMTMG2_0 0x060E1714 // WL, RL, rd2wr, wr2rd -+DATA 4 DDRC_DRAMTMG3_0 0x00909000 // tmrw, tmrd, tmod -+DATA 4 DDRC_DRAMTMG4_0 0x0B04060B // trcd, tccd, trrd, trp -+DATA 4 DDRC_DRAMTMG5_0 0x02030909 // tCKCKEH, tCKCKEL, tckesr, tcke -+DATA 4 DDRC_DRAMTMG6_0 0x02020006 // tckdpde, tckdpdx, tckcsx -+DATA 4 DDRC_DRAMTMG7_0 0x00000301 // tckpde, tckpdx -+DATA 4 DDRC_DRAMTMG12_0 0x00020510 // tCMDCKE, tCKEHCMD -+DATA 4 DDRC_DRAMTMG13_0 0x0B100002 // tODTLoff, tCCDMW, tPPD -+DATA 4 DDRC_DRAMTMG14_0 0x000000AD // txsr -+DATA 4 DDRC_ZQCTL0_0 0x02580012 // tZQCAL, tZQLAT -+DATA 4 DDRC_ZQCTL1_0 0x01E0493E // tZQReset, tzq_short_interval -+DATA 4 DDRC_DFITMG0_0 0x0499820A // dfi_t_ctrl_delay, dfi_t_rddata_en, dfi_tphy_wrdata, dfi_tphy_wrlat -+DATA 4 DDRC_DFITMG1_0 0x00070303 // dfi_t_wrdata_delay, dfi_t_dram_clk_disable, dfi_t_dram_clk_enable -+DATA 4 DDRC_DFITMG2_0 0x00001708 // dfi_tphy_rdcslat, dfi_tphy_wrcslat -+DATA 4 DDRC_DFIMISC_0 0x00000005 // dfi_data_cs_polarity -+DATA 4 DDRC_DFIUPD0_0 0x00400003 // Disable the automatic dfi_ctrlupd_req generation -+DATA 4 DDRC_DFIUPD1_0 0x008000A0 // dfi_ctrlupd_req generation interval generation (min and max) -+DATA 4 DDRC_DFIUPD2_0 0x80000000 // dfi_phyupd_en -+DATA 4 DDRC_ADDRMAP0_0 0x0000001F // addrmap_cs_bit0 -+DATA 4 DDRC_ADDRMAP3_0 0x00000000 // addrmap_col_b9, addrmap_col_b8, addrmap_col_b7, addrmap_col_b6 -+DATA 4 DDRC_ADDRMAP4_0 0x00001F1F // addrmap_col_b10 and addrmap_col_b11 set to de-activated -+DATA 4 DDRC_ADDRMAP1_0 0x00080808 // addrmap_bank_b2, addrmap_bank_b1, addrmap_bank_b0 -+DATA 4 DDRC_ADDRMAP5_0 0x07070707 // addrmap_row_b11, addrmap_row_b10_b2, addrmap_row_b1, addrmap_row_b0 -+DATA 4 DDRC_ADDRMAP6_0 0x07070707 // addrmap_row_b15, addrmap_row_b14, addrmap_row_b13, addrmap_row_b12 -+DATA 4 DDRC_DBICTL_0 0x00000007 // rd_dbi_en=wr_dbi_en=dm_en=1 -+DATA 4 DDRC_ODTMAP_0 0x00002211 // rank[3:0]_wr_odt, rank[3:0]_wr_odt -+DATA 4 DDRC_PCTRL_0_0 0x00000001 // Enable port 0 -+ -+DATA 4 DDRC_DFITMG0_SHADOW_0 0x00808000 -+ -+DATA 4 DDRC_PWRCTL_0 0x0000010D -+ -+DATA 4 0x41c80208 0x1 -+DATA 4 0x41c80040 0xf -+DATA 4 0x41c80204 0x1 -+ -+//------------------------------------------- -+// Configure registers for PHY initialization -+// Timings are computed for 1200MHz DRAM operation -+//-------------------------------------------- -+// Set-up DRAM Configuration Register -+DATA 4 DDR_PHY_DCR_0 0x0000040D // LPDDR4 selection with 8 bank -+// Set-up byte and bit swapping registers -+DATA 4 DDR_PHY_PGCR8_0 0x0001000A -+DATA 4 DDR_PHY_DX0DQMAP0_0 0x00053210 // DQ bit 0/1/2/3/4 remapping -+DATA 4 DDR_PHY_DX0DQMAP1_0 0x00004876 // DQ bit 5/6/7 and DM remapping -+DATA 4 DDR_PHY_DX1DQMAP0_0 0x00053210 // DQ bit 0/1/2/3/4 remapping -+DATA 4 DDR_PHY_DX1DQMAP1_0 0x00004876 // DQ bit 5/6/7 and DM remapping -+DATA 4 DDR_PHY_DX2DQMAP0_0 0x00053210 // DQ bit 0/1/2/3/4 remapping -+DATA 4 DDR_PHY_DX2DQMAP1_0 0x00004876 // DQ bit 5/6/7 and DM remapping -+DATA 4 DDR_PHY_DX3DQMAP0_0 0x00053210 // DQ bit 0/1/2/3/4 remapping -+DATA 4 DDR_PHY_DX3DQMAP1_0 0x00004876 // DQ bit 5/6/7 and DM remapping -+DATA 4 DDR_PHY_CATR0_0 0x00141032 // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY -+DATA 4 DDR_PHY_CATR1_0 0x0103AAAA // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY -+// Set-up PHY General Configuration Register -+// PGCR1,4,5,6,7 are untouched -+SET_BIT 4 DDR_PHY_PGCR1_0 0x000A0000 // DISDIC=1 (no uMCTL2 commands can go to memory) and WDQSEXT=1 -+DATA 4 DDR_PHY_PGCR0_0 0x87001E00 // Set ADCP=1 (Address Copy) -+DATA 4 DDR_PHY_PGCR2_0 0x00F0A193 // Set tREFPRD -+DATA 4 DDR_PHY_PGCR3_0 0x050A1080 // CKEN/CKNEN toggling and polarity -+// Set-up PHY Timing Register -+// PTR2 is untouched -+DATA 4 DDR_PHY_PTR0_0 0x4B025810 // tPLLPD, tPLLGS, tPHYRST -+DATA 4 DDR_PHY_PTR1_0 0x3A981518 // tPLLLOCK, tPLLRST -+// Set-up PLL Control Register -+DATA 4 DDR_PHY_PLLCR0_0 0x001C0000 -+DATA 4 DDR_PHY_DX8SLbPLLCR0_0 0x001C0000 -+// Set-up Impedance Control Register -+DATA 4 DDR_PHY_ZQCR_0 0x008A2C58 // Set ODT_MODE=0b10(LPDDR4 stype pullup) -+// ZPROG_DRAM_ODT and ZPROG_HOST_ODT -+DATA 4 DDR_PHY_ZQ0PR0_0 0x1BBBB // Optimal setting based on factory testing -+DATA 4 DDR_PHY_ZQ1PR0_0 0x1B9BB // Optimal setting based on factory testing -+// Set-up PHY Initialization Register -+DATA 4 DDR_PHY_PIR_0 0x32 -+// Launch initialization (set bit 0) -+DATA 4 DDR_PHY_PIR_0 0x33 -+ -+ -+//------------------------------------------- -+// Configure registers for DRAM initialization -+//------------------------------------------- -+// Set-up Mode Register -+// MR0, MR3, MR4, MR5 MR6 are untouched -+DATA 4 DDR_PHY_MR1_0 0x44 // Set BL, WR-PRE, nWR, RPST -+DATA 4 DDR_PHY_MR2_0 0x24 // Set RL/WL -+DATA 4 DDR_PHY_MR3_0 0xF1 // Set drive strength -+ -+DATA 4 DDR_PHY_MR11_0 0x54 // Set CA and DQ ODT -+DATA 4 DDR_PHY_MR22_0 0x15 // Set ODTE-CS=1 (overrides ODT_CA for CS1 as CS not shared between ranks) -+/* LPDDR4 mode register writes for CA and DQ VREF settings */ -+DATA 4 DDR_PHY_MR12_0 0x48 -+DATA 4 DDR_PHY_MR14_0 0x48 -+// Set-up DRAM Timing Parameters Register -+// DTPR6 is untouched -+DATA 4 DDR_PHY_DTPR0_0 0x0C331A09 // tRRD, tRAS, tRP, tRTP -+DATA 4 DDR_PHY_DTPR1_0 0x28300411 // tWLMRD, tFAW, tODTUP, tMRD -+DATA 4 DDR_PHY_DTPR2_0 0x0069615A // tRTW, tRTODT, tCMDCKE, tCKE, tVRCG, tXS -+DATA 4 DDR_PHY_DTPR3_0 0x01800501 // tODX, tCCD, tDLLK, tDQSCKmax, tDQSCK (FIXME double check tDLLK) -+DATA 4 DDR_PHY_DTPR4_0 0x01502B0C // tRFC, tWLO, tXP -+DATA 4 DDR_PHY_DTPR5_0 0x194C160D // tRC, tRCD, tWTR -+// Set-up PHY Timing Register -+DATA 4 DDR_PHY_PTR3_0 0x00249F00 // tDINIT0 -+DATA 4 DDR_PHY_PTR4_0 0x00000960 // tDINIT1 -+DATA 4 DDR_PHY_PTR5_0 0x0003A980 // tDINIT2 -+DATA 4 DDR_PHY_PTR6_0 0x027004B0 // tDINIT4, tDINIT3 -+ -+ -+// Set-up ODT Configuration Register -+// DDR ODT_CA signal is tied at boundary of DDR. Thus no need to drive it dynamically. -+DATA 4 DDR_PHY_RANKIDR_0 0x00000001 // Select rank 1 to write -+DATA 4 DDR_PHY_ODTCR_0 0x00000000 // ODT of rank1 disabled -+DATA 4 DDR_PHY_RANKIDR_0 0x00000000 // Select rank 0 to write -+DATA 4 DDR_PHY_ODTCR_0 0x00000000 // ODT of rank0 disabled -+ -+ -+// Set-up AC I/O Configuration Register -+// ACIOCR1-4 are untouched -+DATA 4 DDR_PHY_ACIOCR0_0 0x30070800 // PNUM2 (i.e.LPDDR4) selection [10:11] = 0x2 -+DATA 4 DDR_PHY_ACIOCR5_0 0x09000000 // I/O mode = LPDDR4 -+// Due to address copy set A[13] (=cke_B[0]) and A[15] (=cke_B[1]) outputs as always ON. -+DATA 4 DDR_PHY_ACIOCR1_0 0x44000000 -+// Set-up VREF Training Control Registers -+DATA 4 DDR_PHY_VTCR0_0 0xF0032008 // CK1, CK0, DRAM VREF set to same as MR12 -+DATA 4 DDR_PHY_VTCR1_0 0x07F0018F // HVIO=1, SHREN=1, SHRNK=0 -+// Set-up DATX8 General Configuration Registers -+// DXnGCR0-4 are untouched -+SET_BIT 4 DDR_PHY_PGCR5_0 0x4 -+DATA 4 DDR_PHY_PGCR6_0 0x00033200 // Enable CSN Bit Delay VT Compensation (AC already enabled by default) + drift limit -+// Set-up DATX8 General Configuration Registers -+DATA 4 DDR_PHY_DX0GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults -+DATA 4 DDR_PHY_DX1GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults -+DATA 4 DDR_PHY_DX2GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults -+DATA 4 DDR_PHY_DX3GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults -+DATA 4 DDR_PHY_DX0GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults -+DATA 4 DDR_PHY_DX1GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults -+DATA 4 DDR_PHY_DX2GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults -+DATA 4 DDR_PHY_DX3GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults -+// Set-up DATX8 DX Control Register 2 -+// PREOEX=2.5tCK (0.5 more than MR1), POSOEX=1tCK (0.5 more than in MR3), LPWAKEUP_THRSH=0xA -+DATA 4 DDR_PHY_DX8SLbDXCTL2_0 0x001C1400 -+// Set-up DATX8 IO Control Register -+DATA 4 DDR_PHY_DX8SLbIOCR_0 0x79000000 // I/O mode = LPDDR4 -+ -+#if DDR_TRAIN_IN_DCD -+// Wait PHY initialization end then launch DRAM initialization -+// Wait for bit 0 of PGSR0 to be '1' -+CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1 -+CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x7FF40000 // Check that no error occured -+ -+// Launch DRAM 0 initialization (set bit 0) -+DATA 4 DDR_PHY_PIR_0 0x180 -+DATA 4 DDR_PHY_PIR_0 0x181 -+ -+// DRAM 0 initialization end -+CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1 -+CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x7FF40000 -+ -+// Launch a second time DRAM initialization due to following Synopsys PHY bug: -+// Title: "PUB does not program LPDDR4 DRAM MR22 prior to running DRAM ZQ calibration" -+// Workaround: "Run DRAM Initialization twice" -+DATA 4 DDR_PHY_PIR_0 0x100 -+DATA 4 DDR_PHY_PIR_0 0x101 -+ -+// Wait (second time) DRAM 0 initialization end -+CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1 -+CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x7FF40000 -+ -+//---------------------------------------------------------------// -+// DATA training -+//---------------------------------------------------------------// -+// configure PHY for data training -+// The following register writes are recommended by SNPS prior to running training -+CLR_BIT 4 DDR_PHY_DQSDR0_0 0x00000001 // Disable drift -+SET_BIT 4 DDR_PHY_PGCR6_0 0x00000001 // Disable VT compensation -+CHECK_BITS_SET 4 DDR_PHY_PGSR1_0 0x40000000 // Disable VT compensation -+SET_BIT 4 DDR_PHY_PGCR1_0 0x00020040 // DISDIC=1; PUBMODE=1 -+// Per SNPS initialize BIST registers for VREF training -+DATA 4 DDR_PHY_BISTAR1_0 0x00010100 //BMRANK=1 (maximum rank minus 1); BIST Address Increment: 0x10 (16) -+DATA 4 DDR_PHY_BISTAR2_0 0x700003FF // BMBANK=8; BMCOL=0x400 (limit to min cols in JEDEC) -+DATA 4 DDR_PHY_BISTAR4_0 0x00003FFF // BMROW=0x4000 (limit to min rows in JEDEC) -+ -+// Set-up Data Training Configuration Register -+// Note that DTCR0.RFSHDT are set to 0x0 as a workaround for PHY bug (Synopsys -+// case 9001045655: Design limitation in LPDDR4 mode: REFRESH must be disabled during DQS2DQ training). -+// (FYI avoiding refresh during training leads to Denali error (CUMULATIVE_REFRESH_POSTPONE_EXCEEDS_MAX_ALLOWED). -+DATA 4 DDR_PHY_DTCR0_0 0x000071C7 // Set DTRPTN to 0x7. RFSHDT=0 -+DATA 4 DDR_PHY_DTCR1_0 0x00010236 // Set RANKEN -+ -+CLR_BIT 4 DDR_PHY_DX4GCR1_0 0xFF // disable byte 4 -+ -+// Launch Write leveling -+DATA 4 DDR_PHY_PIR_0 0x200 -+DATA 4 DDR_PHY_PIR_0 0x201 -+// Wait Write leveling to complete -+CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1 -+CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x00200000 -+ -+// Set DQS/DQSn glitch suppression resistor for training PHY0 -+DATA 4 DDR_PHY_DX8SLbDQSCTL_0 0x012640F7 -+// Launch Read DQS training -+DATA 4 DDR_PHY_PIR_0 0x400 -+DATA 4 DDR_PHY_PIR_0 0x401 -+// Wait Read DQS training to complete PHY0 -+CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1 -+CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x00400000 -+// Remove DQS/DQSn glitch suppression resistor PHY0 -+DATA 4 DDR_PHY_DX8SLbDQSCTL_0 0x01264000 -+ -+// DQS2DQ training, Write leveling, Deskew and eye trainings -+DATA 4 DDR_PHY_PIR_0 0x0010F800 -+DATA 4 DDR_PHY_PIR_0 0x0010F801 -+// Wait for training to complete -+CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1 -+CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x7FF40000 -+ -+// Launch VREF training -+DATA 4 DDR_PHY_PIR_0 0x00020000 -+DATA 4 DDR_PHY_PIR_0 0x00020001 -+// Wait for training to complete -+CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1 -+CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x00080000 -+ -+//Re-allow uMCTL2 to send commands to DDR -+CLR_BIT 4 DDR_PHY_PGCR1_0 0x00020040 // DISDIC=0, PUBMODE=0 -+ -+//DQS Drift Registers PHY0 -+CLR_BIT 4 DDR_PHY_DX0GCR3_0 0x08000000 -+CLR_BIT 4 DDR_PHY_DX1GCR3_0 0x08000000 -+CLR_BIT 4 DDR_PHY_DX2GCR3_0 0x08000000 -+CLR_BIT 4 DDR_PHY_DX3GCR3_0 0x08000000 -+// Enable DQS drift detection PHY0 -+DATA 4 DDR_PHY_DQSDR0_0 0x20188005 -+DATA 4 DDR_PHY_DQSDR1_0 0xA8AA0000 -+DATA 4 DDR_PHY_DQSDR2_0 0x00070200 -+ -+// Enable VT compensation -+CLR_BIT 4 DDR_PHY_PGCR6_0 0x1 -+ -+//Check that controller is ready to operate -+CHECK_BITS_SET 4 DDRC_STAT_0 0x1 -+ -+#endif diff --git a/meta-digi-arm/recipes-bsp/imx-mkimage/imx-boot_0.2.bb b/meta-digi-arm/recipes-bsp/imx-mkimage/imx-boot_0.2.bb index 00583264b..4cf46a252 100644 --- a/meta-digi-arm/recipes-bsp/imx-mkimage/imx-boot_0.2.bb +++ b/meta-digi-arm/recipes-bsp/imx-mkimage/imx-boot_0.2.bb @@ -9,11 +9,6 @@ require imx-mkimage_git.inc inherit deploy -SRC_URI_append = " \ - file://0001-cc8x-configure-DDRC-for-Micron-MT53B256M32D1.patch \ - file://0002-cc8x-add-second-DCD-for-the-2GB-variant-of-the-cc8x.patch \ -" - # Add CFLAGS with native INCDIR & LIBDIR for imx-mkimage build CFLAGS = "-O2 -Wall -std=c99 -static -I ${STAGING_INCDIR_NATIVE} -L ${STAGING_LIBDIR_NATIVE}"