ccardimx28js removal: delete machine and configuration files
https://jira.digi.com/browse/DEL-4771 Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit is contained in:
Javier Viguera
parent
4bc9e7cbd5
commit
6b78236f42
|
|
@ -1,28 +0,0 @@
|
|||
#@TYPE: Machine
|
||||
#@NAME: ConnectCore for MX28 JumpStart Kit.
|
||||
#@DESCRIPTION: Machine configuration for Digi's ConnectCore for MX28 JSK.
|
||||
|
||||
include conf/machine/include/ccardimx28.inc
|
||||
|
||||
# U-Boot configurations
|
||||
UBOOT_CONFIG ??= "ccardimx28js"
|
||||
UBOOT_CONFIG[ccardimx28js] = "ccardimx28js_config"
|
||||
|
||||
KERNEL_DEVICETREE = "imx28-${MACHINE}.dtb"
|
||||
|
||||
# Serial console
|
||||
SERIAL_CONSOLES ?= "115200;ttyAMA0"
|
||||
|
||||
# Bluetooth tty
|
||||
BT_TTY ?= "ttyAPP0"
|
||||
|
||||
# U-Boot script to be copied to the SD image
|
||||
BOOT_SCRIPTS = "boot.scr:boot.scr"
|
||||
|
||||
# Flash image types
|
||||
IMAGE_FSTYPES ?= "jffs2.sum sdcard tar.bz2 ubifs"
|
||||
|
||||
# FLASH parameters
|
||||
MKUBIFS_ARGS ?= "-m 2048 -e 126976 -c 2047"
|
||||
EXTRA_IMAGECMD_jffs2 ?= "-l -e 128 -n"
|
||||
JFFS2_SUM_EXTRA_ARGS ?= "${EXTRA_IMAGECMD_jffs2}"
|
||||
|
|
@ -1,47 +0,0 @@
|
|||
#@TYPE: Machine
|
||||
#@NAME: ConnectCore for MX28 module.
|
||||
#@DESCRIPTION: Machine configuration for Digi's ConnectCore for MX28 module.
|
||||
|
||||
DIGI_FAMILY = "ccardimx28"
|
||||
MACHINEOVERRIDES =. "mxs:mx28:${DIGI_FAMILY}:"
|
||||
|
||||
include conf/machine/include/imx-digi-base.inc
|
||||
include conf/machine/include/tune-arm926ejs.inc
|
||||
|
||||
# Platform u-boot settings
|
||||
UBOOT_ENTRYPOINT = "0x40008000"
|
||||
UBOOT_SUFFIX = "sb"
|
||||
UBOOT_SYMLINK = "u-boot-${MACHINE}.${UBOOT_SUFFIX}"
|
||||
|
||||
# Wireless external module
|
||||
WIRELESS_MODULE ?= ""
|
||||
WIRELESS_MODULE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'wifi', 'kernel-module-atheros', '', d)}"
|
||||
|
||||
# Firmware
|
||||
MACHINE_FIRMWARE ?= ""
|
||||
MACHINE_FIRMWARE_append = " ${@base_conditional('HAVE_BT', '1' , 'firmware-atheros-ar3k', '', d)}"
|
||||
MACHINE_FIRMWARE_append = " ${@base_conditional('HAVE_WIFI', '1' , 'firmware-atheros-ath6kl', '', d)}"
|
||||
|
||||
MACHINE_EXTRA_RDEPENDS += "mtd-utils-ubifs nvram ubootenv update-flash"
|
||||
MACHINE_EXTRA_RRECOMMENDS += "${MACHINE_FIRMWARE} ${WIRELESS_MODULE}"
|
||||
|
||||
#
|
||||
# Supported variants
|
||||
#
|
||||
# Maintain in sync with the same table in platform local.conf template.
|
||||
#
|
||||
# Name WiFi Eth2 BT 1wire
|
||||
# -------------------------------------------
|
||||
# - N N N N (empty MACHINE_VARIANT="")
|
||||
# e N Y N N
|
||||
# w Y N N N
|
||||
# wb Y N Y N
|
||||
# web Y Y Y N
|
||||
# web1 Y Y Y Y
|
||||
|
||||
# Per-variant machine features
|
||||
MACHINE_FEATURES_append_e = " second-eth"
|
||||
MACHINE_FEATURES_append_w = " wifi"
|
||||
MACHINE_FEATURES_append_wb = " wifi bluetooth"
|
||||
MACHINE_FEATURES_append_web = " wifi second-eth bluetooth"
|
||||
MACHINE_FEATURES_append_web1 = " wifi second-eth bluetooth 1-wire"
|
||||
|
|
@ -10,7 +10,6 @@ PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
|
|||
#
|
||||
# Platform Linux U-Boot
|
||||
# -------------------------------------------------
|
||||
# ccardimx28 3.10 2013.01
|
||||
# ccimx6 4.1, 3.14 2015.04
|
||||
# ccimx6ul 4.1 2015.04
|
||||
#
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
#
|
||||
# build-github.sh
|
||||
#
|
||||
# Copyright (C) 2015 by Digi International Inc.
|
||||
# Copyright (C) 2015-2017 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -22,7 +22,7 @@
|
|||
|
||||
set -e
|
||||
|
||||
AVAILABLE_PLATFORMS="ccardimx28js ccimx6sbc ccimx6ulsbc ccimx6ulstarter"
|
||||
AVAILABLE_PLATFORMS="ccimx6sbc ccimx6ulsbc ccimx6ulstarter"
|
||||
|
||||
MANIFEST_URL="https://github.com/digi-embedded/dey-manifest.git"
|
||||
|
||||
|
|
@ -119,7 +119,6 @@ while read _pl _tgt; do
|
|||
[ -n "${DY_TARGET}" ] && _tgt="${DY_TARGET}" || true
|
||||
eval "${_pl}_tgt=\"${_tgt}\""
|
||||
done<<-_EOF_
|
||||
ccardimx28js dey-image-qt
|
||||
ccimx6sbc dey-image-qt
|
||||
ccimx6ulsbc dey-image-qt
|
||||
ccimx6ulstarter core-image-base
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
#
|
||||
# build.sh
|
||||
#
|
||||
# Copyright (C) 2013 by Digi International Inc.
|
||||
# Copyright (C) 2013-2017 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -169,7 +169,6 @@ while read _pl _var _tgt; do
|
|||
eval "${_pl}_var=\"${_var//,/ }\""
|
||||
eval "${_pl}_tgt=\"${_tgt//,/ }\""
|
||||
done<<-_EOF_
|
||||
ccardimx28js -,e,w,wb,web,web1 dey-image-qt
|
||||
ccimx6sbc DONTBUILDVARIANTS dey-image-qt,dey-image-aws
|
||||
ccimx6ulsbc DONTBUILDVARIANTS dey-image-qt,dey-image-aws
|
||||
ccimx6ulstarter DONTBUILDVARIANTS core-image-base,dey-image-aws
|
||||
|
|
|
|||
|
|
@ -1,22 +0,0 @@
|
|||
# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
|
||||
# changes incompatibly
|
||||
POKY_BBLAYERS_CONF_VERSION = "2"
|
||||
|
||||
BBPATH = "${TOPDIR}"
|
||||
BBFILES ?= ""
|
||||
|
||||
BBLAYERS ?= " \
|
||||
##OEROOT##/meta \
|
||||
##OEROOT##/meta-poky \
|
||||
##OEROOT##/meta-yocto-bsp \
|
||||
##DIGIBASE##/meta-openembedded/meta-oe \
|
||||
##DIGIBASE##/meta-openembedded/meta-python \
|
||||
##DIGIBASE##/meta-openembedded/meta-networking \
|
||||
##DIGIBASE##/meta-openembedded/meta-webserver \
|
||||
##DIGIBASE##/meta-qt5 \
|
||||
##DIGIBASE##/meta-swupdate \
|
||||
##DIGIBASE##/meta-freescale \
|
||||
##DIGIBASE##/meta-fsl-demos \
|
||||
##DIGIBASE##/meta-digi/meta-digi-arm \
|
||||
##DIGIBASE##/meta-digi/meta-digi-dey \
|
||||
"
|
||||
|
|
@ -1,12 +0,0 @@
|
|||
Digi Embedded Yocto provides the following image recipes:
|
||||
|
||||
* dey-image-qt: graphical QT image
|
||||
|
||||
By default the image is X11-based so it provides a full SATO theme
|
||||
desktop environment.
|
||||
|
||||
To compile the image for the framebuffer (instead of X11) add the
|
||||
following line to the project's conf/local.conf:
|
||||
|
||||
DISTRO_FEATURES_remove = "x11"
|
||||
|
||||
|
|
@ -1,270 +0,0 @@
|
|||
#
|
||||
# This file is your local configuration file and is where all local user settings
|
||||
# are placed. The comments in this file give some guide to the options a new user
|
||||
# to the system might want to change but pretty much any configuration option can
|
||||
# be set in this file. More adventurous users can look at local.conf.extended
|
||||
# which contains other examples of configuration which can be placed in this file
|
||||
# but new users likely won't need any of them initially.
|
||||
#
|
||||
# Lines starting with the '#' character are commented out and in some cases the
|
||||
# default values are provided as comments to show people example syntax. Enabling
|
||||
# the option is a question of removing the # character and making any change to the
|
||||
# variable as required.
|
||||
|
||||
#
|
||||
# Machine Selection
|
||||
#
|
||||
# You need to select a specific machine to target the build with. There are a selection
|
||||
# of emulated machines available which can boot and run in the QEMU emulator:
|
||||
#
|
||||
#MACHINE ?= "qemuarm"
|
||||
#MACHINE ?= "qemuarm64"
|
||||
#MACHINE ?= "qemumips"
|
||||
#MACHINE ?= "qemumips64"
|
||||
#MACHINE ?= "qemuppc"
|
||||
#MACHINE ?= "qemux86"
|
||||
#MACHINE ?= "qemux86-64"
|
||||
#
|
||||
# There are also the following hardware board target machines included for
|
||||
# demonstration purposes:
|
||||
#
|
||||
#MACHINE ?= "beaglebone"
|
||||
#MACHINE ?= "genericx86"
|
||||
#MACHINE ?= "genericx86-64"
|
||||
#MACHINE ?= "mpc8315e-rdb"
|
||||
#MACHINE ?= "edgerouter"
|
||||
#
|
||||
# This sets the default machine to be qemux86 if no other machine is selected:
|
||||
#MACHINE ??= "qemux86"
|
||||
|
||||
MACHINE = "ccardimx28js"
|
||||
|
||||
#
|
||||
# Supported variants
|
||||
#
|
||||
# Maintain in sync with the same table in platform machine config file.
|
||||
#
|
||||
# Name WiFi Eth2 BT 1wire
|
||||
# -------------------------------------------
|
||||
# - N N N N (empty MACHINE_VARIANT="")
|
||||
# e N Y N N
|
||||
# w Y N N N
|
||||
# wb Y N Y N
|
||||
# web Y Y Y N
|
||||
# web1 Y Y Y Y
|
||||
MACHINE_VARIANT = "web1"
|
||||
|
||||
#
|
||||
# Use Digi's internal git repositories
|
||||
#
|
||||
#DIGI_INTERNAL_GIT ?= "1"
|
||||
|
||||
#
|
||||
# Where to place downloads
|
||||
#
|
||||
# During a first build the system will download many different source code tarballs
|
||||
# from various upstream projects. This can take a while, particularly if your network
|
||||
# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
|
||||
# can preserve this directory to speed up this part of subsequent builds. This directory
|
||||
# is safe to share between multiple builds on the same machine too.
|
||||
#
|
||||
# The default is a downloads directory under TOPDIR which is the build directory.
|
||||
#
|
||||
#DL_DIR ?= "${TOPDIR}/downloads"
|
||||
|
||||
#
|
||||
# Where to place shared-state files
|
||||
#
|
||||
# BitBake has the capability to accelerate builds based on previously built output.
|
||||
# This is done using "shared state" files which can be thought of as cache objects
|
||||
# and this option determines where those files are placed.
|
||||
#
|
||||
# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
|
||||
# from these files if no changes were made to the configuration. If changes were made
|
||||
# to the configuration, only shared state files where the state was still valid would
|
||||
# be used (done using checksums).
|
||||
#
|
||||
# The default is a sstate-cache directory under TOPDIR.
|
||||
#
|
||||
#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
|
||||
|
||||
#
|
||||
# Where to place the build output
|
||||
#
|
||||
# This option specifies where the bulk of the building work should be done and
|
||||
# where BitBake should place its temporary files and output. Keep in mind that
|
||||
# this includes the extraction and compilation of many applications and the toolchain
|
||||
# which can use Gigabytes of hard disk space.
|
||||
#
|
||||
# The default is a tmp directory under TOPDIR.
|
||||
#
|
||||
#TMPDIR = "${TOPDIR}/tmp"
|
||||
|
||||
#
|
||||
# Default policy config
|
||||
#
|
||||
# The distribution setting controls which policy settings are used as defaults.
|
||||
# The default value is fine for general Yocto project use, at least initially.
|
||||
# Ultimately when creating custom policy, people will likely end up subclassing
|
||||
# these defaults.
|
||||
#
|
||||
DISTRO ?= "dey"
|
||||
# As an example of a subclass there is a "bleeding" edge policy configuration
|
||||
# where many versions are set to the absolute latest code from the upstream
|
||||
# source control systems. This is just mentioned here as an example, its not
|
||||
# useful to most new users.
|
||||
# DISTRO ?= "poky-bleeding"
|
||||
|
||||
#
|
||||
# Package Management configuration
|
||||
#
|
||||
# This variable lists which packaging formats to enable. Multiple package backends
|
||||
# can be enabled at once and the first item listed in the variable will be used
|
||||
# to generate the root filesystems.
|
||||
# Options are:
|
||||
# - 'package_deb' for debian style deb files
|
||||
# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
|
||||
# - 'package_rpm' for rpm style packages
|
||||
# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
|
||||
# We default to rpm:
|
||||
PACKAGE_CLASSES ?= "package_rpm"
|
||||
|
||||
#
|
||||
# SDK target architecture
|
||||
#
|
||||
# This variable specifies the architecture to build SDK items for and means
|
||||
# you can build the SDK packages for architectures other than the machine you are
|
||||
# running the build on (i.e. building i686 packages on an x86_64 host).
|
||||
# Supported values are i686 and x86_64
|
||||
#SDKMACHINE ?= "i686"
|
||||
|
||||
#
|
||||
# Extra image configuration defaults
|
||||
#
|
||||
# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
|
||||
# images. Some of these options are added to certain image types automatically. The
|
||||
# variable can contain the following options:
|
||||
# "dbg-pkgs" - add -dbg packages for all installed packages
|
||||
# (adds symbol information for debugging/profiling)
|
||||
# "dev-pkgs" - add -dev packages for all installed packages
|
||||
# (useful if you want to develop against libs in the image)
|
||||
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
|
||||
# (useful if you want to run the package test suites)
|
||||
# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
|
||||
# "tools-debug" - add debugging tools (gdb, strace)
|
||||
# "eclipse-debug" - add Eclipse remote debugging support
|
||||
# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
|
||||
# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
|
||||
# "debug-tweaks" - make an image suitable for development
|
||||
# e.g. ssh root access has a blank password
|
||||
# There are other application targets that can be used here too, see
|
||||
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
|
||||
# We default to enabling the debugging tweaks.
|
||||
EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
|
||||
|
||||
#
|
||||
# Additional image features
|
||||
#
|
||||
# The following is a list of additional classes to use when building images which
|
||||
# enable extra features. Some available options which can be included in this variable
|
||||
# are:
|
||||
# - 'buildstats' collect build statistics
|
||||
# - 'image-mklibs' to reduce shared library files size for an image
|
||||
# - 'image-prelink' in order to prelink the filesystem image
|
||||
# - 'image-swab' to perform host system intrusion detection
|
||||
# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
|
||||
# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
|
||||
USER_CLASSES ?= "buildstats image-mklibs image-prelink"
|
||||
|
||||
#
|
||||
# Runtime testing of images
|
||||
#
|
||||
# The build system can test booting virtual machine images under qemu (an emulator)
|
||||
# after any root filesystems are created and run tests against those images. To
|
||||
# enable this uncomment this line. See classes/testimage(-auto).bbclass for
|
||||
# further details.
|
||||
#TEST_IMAGE = "1"
|
||||
#
|
||||
# Interactive shell configuration
|
||||
#
|
||||
# Under certain circumstances the system may need input from you and to do this it
|
||||
# can launch an interactive shell. It needs to do this since the build is
|
||||
# multithreaded and needs to be able to handle the case where more than one parallel
|
||||
# process may require the user's attention. The default is iterate over the available
|
||||
# terminal types to find one that works.
|
||||
#
|
||||
# Examples of the occasions this may happen are when resolving patches which cannot
|
||||
# be applied, to use the devshell or the kernel menuconfig
|
||||
#
|
||||
# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
|
||||
# Note: currently, Konsole support only works for KDE 3.x due to the way
|
||||
# newer Konsole versions behave
|
||||
#OE_TERMINAL = "auto"
|
||||
# By default disable interactive patch resolution (tasks will just fail instead):
|
||||
PATCHRESOLVE = "noop"
|
||||
|
||||
#
|
||||
# Disk Space Monitoring during the build
|
||||
#
|
||||
# Monitor the disk space during the build. If there is less that 1GB of space or less
|
||||
# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
|
||||
# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
|
||||
# of the build. The reason for this is that running completely out of space can corrupt
|
||||
# files and damages the build in ways which may not be easily recoverable.
|
||||
# It's necesary to monitor /tmp, if there is no space left the build will fail
|
||||
# with very exotic errors.
|
||||
BB_DISKMON_DIRS = "\
|
||||
STOPTASKS,${TMPDIR},1G,100K \
|
||||
STOPTASKS,${DL_DIR},1G,100K \
|
||||
STOPTASKS,${SSTATE_DIR},1G,100K \
|
||||
STOPTASKS,/tmp,100M,100K \
|
||||
ABORT,${TMPDIR},100M,1K \
|
||||
ABORT,${DL_DIR},100M,1K \
|
||||
ABORT,${SSTATE_DIR},100M,1K \
|
||||
ABORT,/tmp,10M,1K"
|
||||
|
||||
#
|
||||
# Shared-state files from other locations
|
||||
#
|
||||
# As mentioned above, shared state files are prebuilt cache data objects which can
|
||||
# used to accelerate build time. This variable can be used to configure the system
|
||||
# to search other mirror locations for these objects before it builds the data itself.
|
||||
#
|
||||
# This can be a filesystem directory, or a remote url such as http or ftp. These
|
||||
# would contain the sstate-cache results from previous builds (possibly from other
|
||||
# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
|
||||
# cache locations to check for the shared objects.
|
||||
# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
|
||||
# at the end as shown in the examples below. This will be substituted with the
|
||||
# correct path within the directory structure.
|
||||
#SSTATE_MIRRORS ?= "\
|
||||
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
|
||||
#file://.* file:///some/local/dir/sstate/PATH"
|
||||
|
||||
|
||||
#
|
||||
# Qemu configuration
|
||||
#
|
||||
# By default qemu will build with a builtin VNC server where graphical output can be
|
||||
# seen. The two lines below enable the SDL backend too. By default libsdl-native will
|
||||
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
|
||||
# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
|
||||
PACKAGECONFIG_append_pn-qemu-native = " sdl"
|
||||
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
|
||||
#ASSUME_PROVIDED += "libsdl-native"
|
||||
|
||||
|
||||
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
|
||||
# track the version of this file when it was generated. This can safely be ignored if
|
||||
# this doesn't mean anything to you.
|
||||
CONF_VERSION = "1"
|
||||
|
||||
#
|
||||
# Enable local PR server
|
||||
#
|
||||
PRSERV_HOST = "localhost:0"
|
||||
|
||||
#
|
||||
# Some libraries and packages are covered by NXP EULA
|
||||
#
|
||||
#ACCEPT_FSL_EULA = "1"
|
||||
|
|
@ -3,7 +3,7 @@
|
|||
#
|
||||
# mkproject.sh
|
||||
#
|
||||
# Copyright (C) 2013 by Digi International Inc.
|
||||
# Copyright (C) 2013-2017 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -28,7 +28,7 @@ MKP_NONE="\033[0m"
|
|||
MKP_CONFIGPATH="${MKP_SCRIPTPATH}/sources/meta-digi/sdk/config"
|
||||
|
||||
# Blacklist platforms (not officially supported in a DEY release)
|
||||
MKP_BLACKLIST_PLATFORMS="ccardimx28js"
|
||||
MKP_BLACKLIST_PLATFORMS=""
|
||||
|
||||
MKP_SETUP_ENVIRONMENT='#!/bin/bash
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue