meta-digi-dey: Add bridging support.

Add the networking configuration to support the creation of a bridge
interface.

Signed-off-by: Jose Diaz de Grenu de Pedro Jose.DiazdeGrenudePedro@digi.com

meta-digi-dey/recipes-core/busybox/busybox/bridgeifupdown

@@ -0,0 +1,52 @@
+#!/bin/sh
+# Execute only if the interface has a bridge_ports property (this characterizes bridge interfaces)
+case "$IF_BRIDGE_PORTS" in
+    "")
+        exit 0
+        ;;
+    none)
+        INTERFACES=""
+        ;;
+    *)
+        INTERFACES="$IF_BRIDGE_PORTS"
+        ;;
+esac
+
+if [ "$MODE" = "start" ] && [ ! -d /sys/class/net/$IFACE ]; then
+	# Create the bridge interface using brctl
+	brctl addbr $IFACE || exit 1
+
+	# Wait for wlan0 to be ready
+	sleep 0.5
+
+	# For all the interfaces in bridge ports, attach to the bridge and remove ip
+	for port in $INTERFACES; do
+		brctl addif $IFACE $port && ifconfig $port 0.0.0.0 up
+	done
+
+	# Setup the bridge (only options supported by busybox)
+	[ -n "$IF_BRIDEG_AGEING" ] && brctl setageing $IFACE $IF_BRIDGE_AGEING
+	[ -n "$IF_BRIDGE_BRIDGEPRIO" ] && brctl setbridgeprio $IFACE $IF_BRIDGE_BRIDGEPRIO
+	[ -n "$IF_BRIDGE_FD" ] && brctl setfd $IFACE $IF_BRIDGE_FD
+	[ -n "$IF_BRIDGE_HELLO" ] && brctl sethello $IFACE $IF_BRIDGE_HELLO
+	[ -n "$IF_BRIDGE_MAXAGE" ] && brctl setmaxage $IFACE $IF_BRIDGE_MAXAGE
+	[ -n "$IF_BRIDGE_PATHCOST" ] && brctl setpathcost $IFACE $IF_BRIDGE_PATHCOST
+	[ -n "$IF_BRIDGE_PORTPRIO" ] && brctl setportprio $IFACE $IF_BRIDGE_PORTPRIO
+	[ -n "$IF_BRIDGE_STP" ] && brctl stp $IFACE $IF_BRIDGE_STP
+
+	# Activate the bridge
+	ifconfig $IFACE 0.0.0.0 up
+
+elif [ "$MODE" = "stop" ];  then
+	# Bring down the interface
+	ifconfig $IFACE down || exit 1
+
+	# Remove port interfaces from the bridge
+	for port in $INTERFACES; do
+		ifconfig $port down && brctl delif $IFACE $port
+	done
+
+	# Destroy the interface
+	brctl delbr $IFACE
+fi
+

meta-digi-dey/recipes-core/busybox/busybox_1.23.1.bbappend

@@ -16,6 +16,7 @@ SRC_URI += "file://0001-del-baudrates.patch \
             file://pswitch-press \
             file://pswitch-release \
             file://busybox-static-nodes \
+            file://bridgeifupdown \
            "
 
 # hwclock bootscript init parameters
@@ -64,4 +65,12 @@ do_install_append() {
 	if grep "CONFIG_MAKEDEVS=y" ${WORKDIR}/defconfig; then
 		install -m 0755 ${WORKDIR}/busybox-static-nodes ${D}${sysconfdir}/init.d/
 	fi
+
+	# Install bridgeifupdown script
+	if grep "CONFIG_BRCTL" ${WORKDIR}/defconfig; then
+		install -d ${D}${sysconfdir}/network/if-pre-up.d/
+		install -d ${D}${sysconfdir}/network/if-post-down.d/
+		install -m 0755 ${WORKDIR}/bridgeifupdown ${D}${sysconfdir}/network/if-pre-up.d/
+		ln -s ../if-pre-up.d/bridgeifupdown ${D}${sysconfdir}/network/if-post-down.d/bridgeifupdown
+	fi
 }

meta-digi-dey/recipes-core/init-ifupdown/init-ifupdown-1.0/interfaces.br0.example

@@ -0,0 +1,7 @@
+
+## Example bridge between eth0 and wlan0
+#auto br0
+#iface br0 inet static
+#	bridge_ports eth0 wlan0
+#	address 192.168.42.50
+#	netmask 255.255.255.0

meta-digi-dey/recipes-core/init-ifupdown/init-ifupdown_1.0.bbappend

@@ -3,6 +3,7 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${BP}:"
 
 SRC_URI_append = " \
+    file://interfaces.br0.example \
     file://interfaces.eth0.static \
     file://interfaces.eth0.dhcp \
     file://interfaces.eth1.static \
@@ -24,6 +25,7 @@ do_install_append() {
 	cat ${WORKDIR}/interfaces.eth0.${ETH0_MODE} >> ${D}${sysconfdir}/network/interfaces
 	[ -n "${HAVE_EXT_ETH}" ] && cat ${WORKDIR}/interfaces.eth1.${ETH1_MODE} >> ${D}${sysconfdir}/network/interfaces
 	[ -n "${HAVE_WIFI}" ] && cat ${WORKDIR}/interfaces.wlan0.${WLAN0_MODE} >> ${D}${sysconfdir}/network/interfaces
+	cat ${WORKDIR}/interfaces.br0.example >> ${D}${sysconfdir}/network/interfaces
 
 	# Remove config entries if corresponding variable is not defined
 	[ -z "${ETH0_STATIC_DNS}" ] && sed -i -e "/##ETH0_STATIC_DNS##/d" ${D}${sysconfdir}/network/interfaces