uboot: add support to ConnectCore 8M Mini DVK platform
Add initial support cloned from ccimx8mn-dvk https://jira.digi.com/browse/DEL-7397 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit is contained in:
Arturo Buzarra
parent
a76f3031fb
commit
8b01fe57a9
|
|
@ -0,0 +1,66 @@
|
|||
#
|
||||
# U-Boot bootscript for EMMC/SD images created by Yocto.
|
||||
#
|
||||
|
||||
# Back up environment variables
|
||||
setenv ORIG_overlays ${overlays}
|
||||
setenv ORIG_extra_bootargs ${extra_bootargs}
|
||||
|
||||
# Set SOC type to "imx8mm" if not already defined by U-Boot
|
||||
if test ! -n "${soc_type}"; then
|
||||
setenv soc_type "imx8mm"
|
||||
fi
|
||||
|
||||
#
|
||||
# Determine overlays to apply depending on the hardware capabilities
|
||||
# described by the HWID, SOM version, and carrier board version.
|
||||
#
|
||||
if test -n "${module_ram}"; then
|
||||
setexpr som_hv ${hwid_2} \& 38
|
||||
setexpr som_hv ${som_hv} / 8
|
||||
|
||||
setexpr module_has_wifi ${hwid_2} \& 10000
|
||||
setexpr module_has_wifi ${module_has_wifi} / 10000
|
||||
setexpr module_has_bt ${hwid_2} \& 20000
|
||||
setexpr module_has_bt ${module_has_bt} / 20000
|
||||
|
||||
if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
|
||||
setenv overlays _ov_som_bt_ccimx8m.dtbo,${overlays}
|
||||
fi
|
||||
|
||||
if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
|
||||
setenv overlays _ov_som_wifi_ccimx8m.dtbo,${overlays}
|
||||
fi
|
||||
fi
|
||||
|
||||
# Apply quad overlay if the SOC type is "imx8mm"
|
||||
if test "${soc_type}" = "imx8mm"; then
|
||||
setenv overlays _ov_som_quad_ccimx8m.dtbo,${overlays}
|
||||
fi
|
||||
|
||||
# Get the UUID of the configured boot partition.
|
||||
part uuid mmc ${mmcbootdev}:${mmcpart} bootpart
|
||||
# Check the boot source.
|
||||
if test "${bootpart}" = "${part1_uuid}"; then
|
||||
# We are booting from the eMMC using 'linux'.
|
||||
true
|
||||
elif test "${bootpart}" = "${part2_uuid}"; then
|
||||
# We are booting from the eMMC using 'recovery'.
|
||||
setenv boot_initrd true
|
||||
setenv initrd_file uramdisk-recovery.img
|
||||
else
|
||||
# We are booting from the SD card.
|
||||
setenv mmcroot /dev/mmcblk${mmcbootdev}p2
|
||||
fi
|
||||
setenv extra_bootargs fbcon=logo-pos:center ${extra_bootargs}
|
||||
dboot linux mmc ${mmcbootdev}:${mmcpart}
|
||||
|
||||
|
||||
|
||||
# We only get here in case of an error on the dboot command.
|
||||
|
||||
# Undo changes to environment variables
|
||||
setenv overlays ${ORIG_overlays}
|
||||
setenv ORIG_overlays
|
||||
setenv extra_bootargs ${ORIG_extra_bootargs}
|
||||
setenv ORIG_extra_bootargs
|
||||
|
|
@ -0,0 +1,146 @@
|
|||
#
|
||||
# U-Boot script for installing Linux images created by Yocto from the SD
|
||||
# card into the eMMC
|
||||
#
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8mm-dvk.bin;
|
||||
setenv INSTALL_MMCDEV 1
|
||||
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mm-dvk.boot.vfat
|
||||
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mm-dvk.recovery.vfat
|
||||
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mm-dvk.ext4
|
||||
|
||||
# Check for presence of firmware files on the SD card
|
||||
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||
if test ! -e mmc ${INSTALL_MMCDEV} ${install_f}; then
|
||||
echo "ERROR: Could not find file ${install_f}";
|
||||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
# Set bootdelay to zero so that firmware update is run immediately after
|
||||
# the first reset.
|
||||
setenv bootdelay 0
|
||||
|
||||
# Set target MMC device index to eMMC
|
||||
setenv mmcdev 0
|
||||
|
||||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot mmc ${INSTALL_MMCDEV} ${INSTALL_UBOOT_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
# Use old-style update with source file system argument
|
||||
update uboot mmc ${INSTALL_MMCDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
fi
|
||||
|
||||
# Set 'bootcmd' to the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Save the environment
|
||||
# - Force on-the-fly updates to avoid possible verification errors
|
||||
# - Partition the eMMC user data area for Linux
|
||||
# - Update the 'linux' partition
|
||||
# - Update the 'recovery' partition
|
||||
# - Update the 'rootfs' partition
|
||||
# - Configure recovery to wipe 'update' partition
|
||||
# - Disable on-the-fly updates
|
||||
# - Run 'recovery' and let the system boot after
|
||||
setenv bootcmd "
|
||||
env default -a;
|
||||
saveenv;
|
||||
setenv otf-update yes;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Creating Linux partition table on the eMMC\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
run partition_mmc_linux;
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery mmc ${INSTALL_MMCDEV} ${INSTALL_RECOVERY_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update recovery partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
setenv boot_recovery yes;
|
||||
setenv recovery_command wipe_update;
|
||||
setenv otf-update;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
sleep 1;
|
||||
reset;
|
||||
"
|
||||
|
||||
saveenv
|
||||
reset
|
||||
|
|
@ -0,0 +1,147 @@
|
|||
#
|
||||
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||
# into the eMMC
|
||||
#
|
||||
|
||||
echo "#######################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "#######################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8mm-dvk.bin;
|
||||
setenv INSTALL_USBDEV 0
|
||||
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mm-dvk.boot.vfat
|
||||
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mm-dvk.recovery.vfat
|
||||
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mm-dvk.ext4
|
||||
|
||||
# Check for presence of firmware files on the USB
|
||||
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||
if test ! -e usb ${INSTALL_USBDEV} ${install_f}; then
|
||||
echo "ERROR: Could not find file ${install_f}";
|
||||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
# Set bootdelay to zero so that firmware update is run immediately after
|
||||
# the first reset.
|
||||
setenv bootdelay 0
|
||||
|
||||
# Set target MMC device index to eMMC
|
||||
setenv mmcdev 0
|
||||
|
||||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot usb ${INSTALL_USBDEV} ${INSTALL_UBOOT_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
# Use old-style update with source file system argument
|
||||
update uboot mmc ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||
if test $? -eq 1; then
|
||||
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||
echo "";
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
fi
|
||||
|
||||
# Set 'bootcmd' to the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Save the environment
|
||||
# - Force on-the-fly updates to avoid possible verification errors
|
||||
# - Partition the eMMC user data area for Linux
|
||||
# - Update the 'linux' partition
|
||||
# - Update the 'recovery' partition
|
||||
# - Update the 'rootfs' partition
|
||||
# - Configure recovery to wipe 'update' partition
|
||||
# - Disable on-the-fly updates
|
||||
# - Run 'recovery' and let the system boot after
|
||||
setenv bootcmd "
|
||||
env default -a;
|
||||
saveenv;
|
||||
setenv otf-update yes;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Creating Linux partition table on the eMMC\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
run partition_mmc_linux;
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
usb start;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery usb ${INSTALL_USBDEV} ${INSTALL_RECOVERY_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update recovery partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
setenv boot_recovery yes;
|
||||
setenv recovery_command wipe_update;
|
||||
setenv otf-update;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
sleep 1;
|
||||
reset;
|
||||
"
|
||||
|
||||
saveenv
|
||||
reset
|
||||
119
meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8mm-dvk/install_linux_fw_uuu.sh
Executable file
119
meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8mm-dvk/install_linux_fw_uuu.sh
Executable file
|
|
@ -0,0 +1,119 @@
|
|||
#!/bin/bash
|
||||
#===============================================================================
|
||||
#
|
||||
# Copyright (C) 2021 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
# under the terms of the GNU General Public License version 2 as published by
|
||||
# the Free Software Foundation.
|
||||
#
|
||||
#
|
||||
# Description:
|
||||
# Script to flash Yocto build artifacts over USB to the target.
|
||||
#===============================================================================
|
||||
# set -x
|
||||
|
||||
clear
|
||||
|
||||
# Parse uuu cmd output
|
||||
function getenv()
|
||||
{
|
||||
uuu -v fb: ucmd printenv "${1}" | sed -ne "s,^${1}=,,g;T;p"
|
||||
}
|
||||
|
||||
#
|
||||
# U-Boot script for installing Linux images created by Yocto into the eMMC
|
||||
#
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
# Get U-Boot file name from cmdline when passed
|
||||
if [ -n "$1" ]; then
|
||||
INSTALL_UBOOT_FILENAME="$1"
|
||||
fi
|
||||
|
||||
sleep 10
|
||||
|
||||
if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
|
||||
INSTALL_UBOOT_FILENAME="imx-boot-ccimx8mm-dvk.bin"
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
uuu fb: ucmd setenv forced_update 1
|
||||
|
||||
# Update U-Boot
|
||||
uuu fb: flash bootloader ${INSTALL_UBOOT_FILENAME}
|
||||
|
||||
# Set MMC to boot from BOOT1 partition
|
||||
uuu fb: ucmd mmc partconf 0 1 1 1
|
||||
|
||||
# Set 'bootcmd' for the second part of the script that will
|
||||
# - Reset environment to defaults
|
||||
# - Save the environment
|
||||
# - Partition the eMMC user data area for Linux
|
||||
# - Update the 'linux' partition
|
||||
# - Update the 'recovery' partition
|
||||
# - Update the 'rootfs' partition
|
||||
uuu fb: ucmd setenv bootcmd "
|
||||
env default -a;
|
||||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Creating Linux partition table on the eMMC\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
run partition_mmc_linux;
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||
echo \"\";
|
||||
echo \"Aborted.\";
|
||||
exit;
|
||||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Start installation Linux firmware files\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
saveenv;
|
||||
fastboot 0;
|
||||
"
|
||||
|
||||
uuu fb: ucmd saveenv
|
||||
|
||||
uuu fb: acmd reset
|
||||
|
||||
INSTALL_LINUX_FILENAME="dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mm-dvk.boot.vfat"
|
||||
INSTALL_RECOVERY_FILENAME="dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mm-dvk.recovery.vfat"
|
||||
INSTALL_ROOTFS_FILENAME="dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mm-dvk.ext4"
|
||||
|
||||
# Wait that target returns from reset
|
||||
sleep 3
|
||||
|
||||
# Update Linux
|
||||
uuu fb: flash -raw2sparse linux ${INSTALL_LINUX_FILENAME}
|
||||
|
||||
# Update Recovery
|
||||
uuu fb: flash -raw2sparse recovery ${INSTALL_RECOVERY_FILENAME}
|
||||
|
||||
# Update Rootfs
|
||||
uuu fb: flash -raw2sparse rootfs ${INSTALL_ROOTFS_FILENAME}
|
||||
|
||||
# Configure u-boot to boot into recovery mode
|
||||
uuu fb: ucmd setenv boot_recovery yes
|
||||
uuu fb: ucmd setenv recovery_command wipe_update
|
||||
|
||||
uuu fb: ucmd saveenv
|
||||
|
||||
# Reset the target
|
||||
uuu fb: acmd reset
|
||||
|
||||
exit
|
||||
|
|
@ -25,11 +25,11 @@ if test -n "${module_ram}"; then
|
|||
setexpr module_has_bt ${module_has_bt} / 20000
|
||||
|
||||
if test "${module_has_bt}" = "1" && test -z "${disable_bt}"; then
|
||||
setenv overlays _ov_som_bt_ccimx8mn.dtbo,${overlays}
|
||||
setenv overlays _ov_som_bt_ccimx8m.dtbo,${overlays}
|
||||
fi
|
||||
|
||||
if test "${module_has_wifi}" = "1" && test -z "${disable_wifi}"; then
|
||||
setenv overlays _ov_som_wifi_ccimx8mn.dtbo,${overlays}
|
||||
setenv overlays _ov_som_wifi_ccimx8m.dtbo,${overlays}
|
||||
fi
|
||||
|
||||
if test "${som_hv}" = "1"; then
|
||||
|
|
@ -39,7 +39,7 @@ fi
|
|||
|
||||
# Apply quad overlay if the SOC type is "imx8mn"
|
||||
if test "${soc_type}" = "imx8mn"; then
|
||||
setenv overlays _ov_som_quad_ccimx8mn.dtbo,${overlays}
|
||||
setenv overlays _ov_som_quad_ccimx8m.dtbo,${overlays}
|
||||
fi
|
||||
|
||||
# Apply DVK v1-v2 overlay if the board version is < 3
|
||||
|
|
|
|||
Loading…
Reference in New Issue