uboot: add script to update firmware from a USB stick
Create scripts to install DEY firmware using a USB stick. https://jira.digi.com/browse/DEL-6802 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit is contained in:
Arturo Buzarra
parent
65d184cac3
commit
8b3b8b5516
|
|
@ -24,6 +24,7 @@ SRC_URI = " \
|
||||||
SRC_URI_append = " \
|
SRC_URI_append = " \
|
||||||
file://boot.txt \
|
file://boot.txt \
|
||||||
file://install_linux_fw_sd.txt \
|
file://install_linux_fw_sd.txt \
|
||||||
|
file://install_linux_fw_usb.txt \
|
||||||
${@oe.utils.conditional('UBOOT_HAS_FASTBOOT', 'true', 'file://install_linux_fw_uuu.sh', '', d)} \
|
${@oe.utils.conditional('UBOOT_HAS_FASTBOOT', 'true', 'file://install_linux_fw_uuu.sh', '', d)} \
|
||||||
"
|
"
|
||||||
|
|
||||||
|
|
@ -152,6 +153,9 @@ do_deploy_append() {
|
||||||
sed -i -e 's,##GRAPHICAL_BACKEND##,${GRAPHICAL_BACKEND},g' ${WORKDIR}/install_linux_fw_sd.txt
|
sed -i -e 's,##GRAPHICAL_BACKEND##,${GRAPHICAL_BACKEND},g' ${WORKDIR}/install_linux_fw_sd.txt
|
||||||
mkimage -T script -n "DEY firmware install script" -C none -d ${WORKDIR}/install_linux_fw_sd.txt ${DEPLOYDIR}/install_linux_fw_sd.scr
|
mkimage -T script -n "DEY firmware install script" -C none -d ${WORKDIR}/install_linux_fw_sd.txt ${DEPLOYDIR}/install_linux_fw_sd.scr
|
||||||
|
|
||||||
|
sed -i -e 's,##GRAPHICAL_BACKEND##,${GRAPHICAL_BACKEND},g' ${WORKDIR}/install_linux_fw_usb.txt
|
||||||
|
mkimage -T script -n "DEY firmware install script" -C none -d ${WORKDIR}/install_linux_fw_usb.txt ${DEPLOYDIR}/install_linux_fw_usb.scr
|
||||||
|
|
||||||
if [ "${@oe.utils.conditional('UBOOT_HAS_FASTBOOT', 'true', 'true', '', d)}" = "true" ]; then
|
if [ "${@oe.utils.conditional('UBOOT_HAS_FASTBOOT', 'true', 'true', '', d)}" = "true" ]; then
|
||||||
# DEY firmware install uuu script
|
# DEY firmware install uuu script
|
||||||
sed -i -e 's,##GRAPHICAL_BACKEND##,${GRAPHICAL_BACKEND},g' ${WORKDIR}/install_linux_fw_uuu.sh
|
sed -i -e 's,##GRAPHICAL_BACKEND##,${GRAPHICAL_BACKEND},g' ${WORKDIR}/install_linux_fw_uuu.sh
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,168 @@
|
||||||
|
#
|
||||||
|
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||||
|
# into the eMMC
|
||||||
|
#
|
||||||
|
|
||||||
|
echo "#######################################################"
|
||||||
|
echo "# Linux firmware install from USB #"
|
||||||
|
echo "#######################################################"
|
||||||
|
echo ""
|
||||||
|
echo " This process will erase your eMMC and will install a new"
|
||||||
|
echo " U-Boot and Linux firmware images on the eMMC."
|
||||||
|
echo ""
|
||||||
|
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||||
|
echo " to continue."
|
||||||
|
|
||||||
|
sleep 10
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "Aborted by user.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Determine U-Boot file to program basing on module variant
|
||||||
|
if test -n "${module_variant}"; then
|
||||||
|
if test "${module_variant}" = "0x01" || test "${module_variant}" = "0x02"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qpsbc2GB.imx;
|
||||||
|
elif test "${module_variant}" = "0x03"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qpsbc1GB.imx;
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
# Use 'test -n ...' because 'test -z ...' does not work well on old versions of
|
||||||
|
# u-boot when the checked value is empty.
|
||||||
|
if test -n "${INSTALL_UBOOT_FILENAME}"; then
|
||||||
|
true;
|
||||||
|
else
|
||||||
|
echo "";
|
||||||
|
echo "[ERROR] Cannot determine U-Boot file for this module!";
|
||||||
|
echo "";
|
||||||
|
echo "1. Set variable 'INSTALL_UBOOT_FILENAME' depending on your ConnectCore 6 QuadPlus variant:";
|
||||||
|
echo " - For a QuadPlus CPU with 2GB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qpsbc2GB.imx";
|
||||||
|
echo " - For a DualPlus CPU with 1GB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qpsbc1GB.imx";
|
||||||
|
echo "";
|
||||||
|
echo "";
|
||||||
|
echo "2. Run the install script again.";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted";
|
||||||
|
echo "";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
|
||||||
|
setenv INSTALL_USBDEV 0
|
||||||
|
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6qpsbc.boot.vfat
|
||||||
|
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6qpsbc.recovery.vfat
|
||||||
|
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6qpsbc.ext4
|
||||||
|
|
||||||
|
# Check for presence of firmware files on the USB
|
||||||
|
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||||
|
if test ! -e usb ${INSTALL_USBDEV} ${install_f}; then
|
||||||
|
echo "ERROR: Could not find file ${install_f}";
|
||||||
|
install_abort=1;
|
||||||
|
fi;
|
||||||
|
done
|
||||||
|
if test -n "${install_abort}"; then
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Skip user confirmation for U-Boot update
|
||||||
|
setenv forced_update 1
|
||||||
|
|
||||||
|
# Set bootdelay to zero so that firmware update is run immediately after
|
||||||
|
# the first reset.
|
||||||
|
setenv bootdelay 0
|
||||||
|
|
||||||
|
# Set target MMC device index to eMMC
|
||||||
|
setenv mmcdev 0
|
||||||
|
|
||||||
|
# Update U-Boot
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
update uboot usb ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Set 'bootcmd' to the second part of the script that will
|
||||||
|
# - Reset environment to defaults
|
||||||
|
# - Save the environment
|
||||||
|
# - Partition the eMMC user data area for Linux
|
||||||
|
# - Update the 'linux' partition
|
||||||
|
# - Update the 'recovery' partition
|
||||||
|
# - Update the 'rootfs' partition
|
||||||
|
# - Configure recovery to wipe 'update' partition
|
||||||
|
# - Run 'recovery' and let the system boot after
|
||||||
|
setenv bootcmd "
|
||||||
|
env default -a;
|
||||||
|
saveenv;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Creating Linux partition table on the eMMC\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
run partition_mmc_linux;
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
usb start;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux kernel and device tree files\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update linux usb ${INSTALL_USBDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update linux partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing recovery\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update recovery usb ${INSTALL_USBDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update recovery partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux root file system\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update rootfs usb ${INSTALL_USBDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
setenv boot_recovery yes;
|
||||||
|
setenv recovery_command wipe_update;
|
||||||
|
saveenv;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
sleep 1;
|
||||||
|
reset;
|
||||||
|
"
|
||||||
|
|
||||||
|
saveenv
|
||||||
|
reset
|
||||||
|
|
@ -0,0 +1,179 @@
|
||||||
|
#
|
||||||
|
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||||
|
# into the eMMC
|
||||||
|
#
|
||||||
|
|
||||||
|
echo "#######################################################"
|
||||||
|
echo "# Linux firmware install from USB #"
|
||||||
|
echo "#######################################################"
|
||||||
|
echo ""
|
||||||
|
echo " This process will erase your eMMC and will install a new"
|
||||||
|
echo " U-Boot and Linux firmware images on the eMMC."
|
||||||
|
echo ""
|
||||||
|
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||||
|
echo " to continue."
|
||||||
|
|
||||||
|
sleep 10
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "Aborted by user.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Determine U-Boot file to program basing on module variant
|
||||||
|
if test -n "${module_variant}"; then
|
||||||
|
if test "${module_variant}" = "0x12"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc2GB.imx;
|
||||||
|
elif test "${module_variant}" = "0x02" || test "${module_variant}" = "0x04" || test "${module_variant}" = "0x05" || test "${module_variant}" = "0x11" || test "${module_variant}" = "0x14"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc.imx;
|
||||||
|
elif test "${module_variant}" = "0x03" || test "${module_variant}" = "0x0e" || test "${module_variant}" = "0x0f"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc512MB.imx;
|
||||||
|
elif test "${module_variant}" = "0x0b" || test "${module_variant}" = "0x15"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6dlsbc.imx;
|
||||||
|
elif test "${module_variant}" = "0x0c" || test "${module_variant}" = "0x13"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6dlsbc512MB.imx;
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
# Use 'test -n ...' because 'test -z ...' does not work well on old versions of
|
||||||
|
# u-boot when the checked value is empty.
|
||||||
|
if test -n "${INSTALL_UBOOT_FILENAME}"; then
|
||||||
|
true;
|
||||||
|
else
|
||||||
|
echo "";
|
||||||
|
echo "[ERROR] Cannot determine U-Boot file for this module!";
|
||||||
|
echo "";
|
||||||
|
echo "1. Set variable 'INSTALL_UBOOT_FILENAME' depending on your ConnectCore 6 variant:";
|
||||||
|
echo " - For a Quad/Dual CPU with 2GB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc2GB.imx";
|
||||||
|
echo " - For a Quad/Dual CPU with 1GB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc.imx";
|
||||||
|
echo " - For a Quad/Dual CPU with 512MB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6qsbc512MB.imx";
|
||||||
|
echo " - For a DualLite/Solo CPU with 1GB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6dlsbc.imx";
|
||||||
|
echo " - For a DualLite/Solo CPU with 512MB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6dlsbc512MB.imx";
|
||||||
|
echo "";
|
||||||
|
echo "2. Run the install script again.";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted";
|
||||||
|
echo "";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
|
||||||
|
setenv INSTALL_USBDEV 0
|
||||||
|
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6sbc.boot.vfat
|
||||||
|
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6sbc.recovery.vfat
|
||||||
|
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6sbc.ext4
|
||||||
|
|
||||||
|
# Check for presence of firmware files on the USB
|
||||||
|
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||||
|
if test ! -e usb ${INSTALL_USBDEV} ${install_f}; then
|
||||||
|
echo "ERROR: Could not find file ${install_f}";
|
||||||
|
install_abort=1;
|
||||||
|
fi;
|
||||||
|
done
|
||||||
|
if test -n "${install_abort}"; then
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Skip user confirmation for U-Boot update
|
||||||
|
setenv forced_update 1
|
||||||
|
|
||||||
|
# Set bootdelay to zero so that firmware update is run immediately after
|
||||||
|
# the first reset.
|
||||||
|
setenv bootdelay 0
|
||||||
|
|
||||||
|
# Set target MMC device index to eMMC
|
||||||
|
setenv mmcdev 0
|
||||||
|
|
||||||
|
# Update U-Boot
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
update uboot usb ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Set 'bootcmd' to the second part of the script that will
|
||||||
|
# - Reset environment to defaults
|
||||||
|
# - Save the environment
|
||||||
|
# - Partition the eMMC user data area for Linux
|
||||||
|
# - Update the 'linux' partition
|
||||||
|
# - Update the 'recovery' partition
|
||||||
|
# - Update the 'rootfs' partition
|
||||||
|
# - Configure recovery to wipe 'update' partition
|
||||||
|
# - Run 'recovery' and let the system boot after
|
||||||
|
setenv bootcmd "
|
||||||
|
env default -a;
|
||||||
|
saveenv;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Creating Linux partition table on the eMMC\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
run partition_mmc_linux;
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
usb start;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux kernel and device tree files\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update linux usb ${INSTALL_USBDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update linux partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing recovery\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update recovery usb ${INSTALL_USBDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update recovery partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux root file system\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update rootfs usb ${INSTALL_USBDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
setenv boot_recovery yes;
|
||||||
|
setenv recovery_command wipe_update;
|
||||||
|
saveenv;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
sleep 1;
|
||||||
|
reset;
|
||||||
|
"
|
||||||
|
|
||||||
|
saveenv
|
||||||
|
reset
|
||||||
|
|
@ -0,0 +1,158 @@
|
||||||
|
#
|
||||||
|
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||||
|
# into the NAND
|
||||||
|
#
|
||||||
|
|
||||||
|
echo "#######################################################"
|
||||||
|
echo "# Linux firmware install from USB #"
|
||||||
|
echo "#######################################################"
|
||||||
|
echo ""
|
||||||
|
echo " This process will erase your NAND and will install a new"
|
||||||
|
echo " U-Boot and Linux firmware images on the NAND."
|
||||||
|
echo ""
|
||||||
|
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||||
|
echo " to continue."
|
||||||
|
|
||||||
|
sleep 10
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "Aborted by user.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Determine U-Boot file to program basing on module variant
|
||||||
|
if test -n "${module_variant}"; then
|
||||||
|
if test "${module_variant}" = "0x02" || test "${module_variant}" = "0x03" || test "${module_variant}" = "0x06" || test "${module_variant}" = "0x0a"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc.imx;
|
||||||
|
elif test "${module_variant}" = "0x04" || test "${module_variant}" = "0x05" || test "${module_variant}" = "0x07"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc1GB.imx;
|
||||||
|
elif test "${module_variant}" = "0x08" || test "${module_variant}" = "0x09"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc512MB.imx
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
# Use 'test -n ...' because 'test -z ...' does not work well on old versions of
|
||||||
|
# u-boot when the checked value is empty.
|
||||||
|
if test -n "${INSTALL_UBOOT_FILENAME}"; then
|
||||||
|
true;
|
||||||
|
else
|
||||||
|
echo "";
|
||||||
|
echo "[ERROR] Cannot determine U-Boot file for this module!";
|
||||||
|
echo "";
|
||||||
|
echo "1. Set variable 'INSTALL_UBOOT_FILENAME' depending on your ConnectCore 6UL variant:";
|
||||||
|
echo " - For a SOM with 1GB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc1GB.imx";
|
||||||
|
echo " - For a SOM with 512MB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc512MB.imx";
|
||||||
|
echo " - For a SOM with 256MB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulsbc.imx";
|
||||||
|
echo "";
|
||||||
|
echo "2. Run the install script again.";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted";
|
||||||
|
echo "";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
|
||||||
|
setenv INSTALL_USBDEV 0
|
||||||
|
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6ulsbc.boot.ubifs
|
||||||
|
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6ulsbc.recovery.ubifs
|
||||||
|
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx6ulsbc.ubifs
|
||||||
|
|
||||||
|
# Check for presence of firmware files on the USB
|
||||||
|
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||||
|
if test ! -e usb ${INSTALL_USBDEV} ${install_f}; then
|
||||||
|
echo "ERROR: Could not find file ${install_f}";
|
||||||
|
install_abort=1;
|
||||||
|
fi;
|
||||||
|
done
|
||||||
|
if test -n "${install_abort}"; then
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Skip user confirmation for U-Boot update
|
||||||
|
setenv forced_update 1
|
||||||
|
|
||||||
|
# Set bootdelay to zero so that firmware update is run immediately after
|
||||||
|
# the first reset.
|
||||||
|
setenv bootdelay 0
|
||||||
|
|
||||||
|
# Update U-Boot
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
update uboot usb ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Set 'bootcmd' to the second part of the script that will
|
||||||
|
# - Reset environment to defaults
|
||||||
|
# - Save the environment
|
||||||
|
# - Update the 'linux' partition
|
||||||
|
# - Update the 'recovery' partition
|
||||||
|
# - Update the 'rootfs' partition
|
||||||
|
# - Configure recovery to wipe 'update' partition
|
||||||
|
# - Run 'recovery' and let the system boot after
|
||||||
|
setenv bootcmd "
|
||||||
|
env default -a;
|
||||||
|
saveenv;
|
||||||
|
usb start;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux kernel and device tree files\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
nand erase.part linux;
|
||||||
|
update linux usb ${INSTALL_USBDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update linux partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing recovery\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
nand erase.part recovery;
|
||||||
|
update recovery usb ${INSTALL_USBDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update recovery partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux root file system\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
nand erase.part rootfs;
|
||||||
|
update rootfs usb ${INSTALL_USBDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
setenv boot_recovery yes;
|
||||||
|
setenv recovery_command wipe_update;
|
||||||
|
saveenv;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
sleep 1;
|
||||||
|
reset;
|
||||||
|
"
|
||||||
|
|
||||||
|
saveenv
|
||||||
|
reset
|
||||||
|
|
@ -0,0 +1,158 @@
|
||||||
|
#
|
||||||
|
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||||
|
# into the NAND
|
||||||
|
#
|
||||||
|
|
||||||
|
echo "#######################################################"
|
||||||
|
echo "# Linux firmware install from USB #"
|
||||||
|
echo "#######################################################"
|
||||||
|
echo ""
|
||||||
|
echo " This process will erase your NAND and will install a new"
|
||||||
|
echo " U-Boot and Linux firmware images on the NAND."
|
||||||
|
echo ""
|
||||||
|
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||||
|
echo " to continue."
|
||||||
|
|
||||||
|
sleep 10
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "Aborted by user.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Determine U-Boot file to program basing on module variant
|
||||||
|
if test -n "${module_variant}"; then
|
||||||
|
if test "${module_variant}" = "0x02" || test "${module_variant}" = "0x03" || test "${module_variant}" = "0x06" || test "${module_variant}" = "0x0a"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulstarter.imx;
|
||||||
|
elif test "${module_variant}" = "0x04" || test "${module_variant}" = "0x05" || test "${module_variant}" = "0x07"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulstarter1GB.imx;
|
||||||
|
elif test "${module_variant}" = "0x08" || test "${module_variant}" = "0x09"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulstarter512MB.imx
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
# Use 'test -n ...' because 'test -z ...' does not work well on old versions of
|
||||||
|
# u-boot when the checked value is empty.
|
||||||
|
if test -n "${INSTALL_UBOOT_FILENAME}"; then
|
||||||
|
true;
|
||||||
|
else
|
||||||
|
echo "";
|
||||||
|
echo "[ERROR] Cannot determine U-Boot file for this module!";
|
||||||
|
echo "";
|
||||||
|
echo "1. Set variable 'INSTALL_UBOOT_FILENAME' depending on your ConnectCore 6UL variant:";
|
||||||
|
echo " - For a SOM with 1GB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulstarter1GB.imx";
|
||||||
|
echo " - For a SOM with 512MB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulstarter512MB.imx";
|
||||||
|
echo " - For a SOM with 256MB DDR3, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME u-boot-ccimx6ulstarter.imx";
|
||||||
|
echo "";
|
||||||
|
echo "2. Run the install script again.";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted";
|
||||||
|
echo "";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
|
||||||
|
setenv INSTALL_USBDEV 0
|
||||||
|
setenv INSTALL_LINUX_FILENAME core-image-base-ccimx6ulstarter.boot.ubifs
|
||||||
|
setenv INSTALL_RECOVERY_FILENAME core-image-base-ccimx6ulstarter.recovery.ubifs
|
||||||
|
setenv INSTALL_ROOTFS_FILENAME core-image-base-ccimx6ulstarter.ubifs
|
||||||
|
|
||||||
|
# Check for presence of firmware files on the USB
|
||||||
|
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||||
|
if test ! -e mmc ${INSTALL_USBDEV} ${install_f}; then
|
||||||
|
echo "ERROR: Could not find file ${install_f}";
|
||||||
|
install_abort=1;
|
||||||
|
fi;
|
||||||
|
done
|
||||||
|
if test -n "${install_abort}"; then
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Skip user confirmation for U-Boot update
|
||||||
|
setenv forced_update 1
|
||||||
|
|
||||||
|
# Set bootdelay to zero so that firmware update is run immediately after
|
||||||
|
# the first reset.
|
||||||
|
setenv bootdelay 0
|
||||||
|
|
||||||
|
# Update U-Boot
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
update uboot usb ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Set 'bootcmd' to the second part of the script that will
|
||||||
|
# - Reset environment to defaults
|
||||||
|
# - Save the environment
|
||||||
|
# - Update the 'linux' partition
|
||||||
|
# - Update the 'recovery' partition
|
||||||
|
# - Update the 'rootfs' partition
|
||||||
|
# - Configure recovery to wipe 'update' partition
|
||||||
|
# - Run 'recovery' and let the system boot after
|
||||||
|
setenv bootcmd "
|
||||||
|
env default -a;
|
||||||
|
saveenv;
|
||||||
|
usb start;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux kernel and device tree files\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
nand erase.part linux;
|
||||||
|
update linux usb ${INSTALL_USBDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update linux partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing recovery\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
nand erase.part recovery;
|
||||||
|
update recovery usb ${INSTALL_USBDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update recovery partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux root file system\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
nand erase.part rootfs;
|
||||||
|
update rootfs usb ${INSTALL_USBDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
setenv boot_recovery yes;
|
||||||
|
setenv recovery_command wipe_update;
|
||||||
|
saveenv;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
sleep 1;
|
||||||
|
reset;
|
||||||
|
"
|
||||||
|
|
||||||
|
saveenv
|
||||||
|
reset
|
||||||
|
|
@ -0,0 +1,143 @@
|
||||||
|
#
|
||||||
|
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||||
|
# into the eMMC
|
||||||
|
#
|
||||||
|
|
||||||
|
echo "#######################################################"
|
||||||
|
echo "# Linux firmware install from USB #"
|
||||||
|
echo "#######################################################"
|
||||||
|
echo ""
|
||||||
|
echo " This process will erase your eMMC and will install a new"
|
||||||
|
echo " U-Boot and Linux firmware images on the eMMC."
|
||||||
|
echo ""
|
||||||
|
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||||
|
echo " to continue."
|
||||||
|
|
||||||
|
sleep 10
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "Aborted by user.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8mn-dvk.bin;
|
||||||
|
setenv INSTALL_USBDEV 0
|
||||||
|
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mn-dvk.boot.vfat
|
||||||
|
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mn-dvk.recovery.vfat
|
||||||
|
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8mn-dvk.ext4
|
||||||
|
|
||||||
|
# Check for presence of firmware files on the USB
|
||||||
|
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||||
|
if test ! -e usb ${INSTALL_USBDEV} ${install_f}; then
|
||||||
|
echo "ERROR: Could not find file ${install_f}";
|
||||||
|
install_abort=1;
|
||||||
|
fi;
|
||||||
|
done
|
||||||
|
if test -n "${install_abort}"; then
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Skip user confirmation for U-Boot update
|
||||||
|
setenv forced_update 1
|
||||||
|
|
||||||
|
# Set bootdelay to zero so that firmware update is run immediately after
|
||||||
|
# the first reset.
|
||||||
|
setenv bootdelay 0
|
||||||
|
|
||||||
|
# Set target MMC device index to eMMC
|
||||||
|
setenv mmcdev 0
|
||||||
|
|
||||||
|
# Update U-Boot
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
update uboot usb ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Set 'bootcmd' to the second part of the script that will
|
||||||
|
# - Reset environment to defaults
|
||||||
|
# - Save the environment
|
||||||
|
# - Force on-the-fly updates to avoid possible verification errors
|
||||||
|
# - Partition the eMMC user data area for Linux
|
||||||
|
# - Update the 'linux' partition
|
||||||
|
# - Update the 'recovery' partition
|
||||||
|
# - Update the 'rootfs' partition
|
||||||
|
# - Configure recovery to wipe 'update' partition
|
||||||
|
# - Disable on-the-fly updates
|
||||||
|
# - Run 'recovery' and let the system boot after
|
||||||
|
setenv bootcmd "
|
||||||
|
env default -a;
|
||||||
|
saveenv;
|
||||||
|
setenv otf-update yes;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Creating Linux partition table on the eMMC\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
run partition_mmc_linux;
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
usb start;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux kernel and device tree files\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update linux usb ${INSTALL_USBDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update linux partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing recovery\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update recovery usb ${INSTALL_USBDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update recovery partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux root file system\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update rootfs usb ${INSTALL_USBDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
setenv boot_recovery yes;
|
||||||
|
setenv recovery_command wipe_update;
|
||||||
|
setenv otf-update;
|
||||||
|
saveenv;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
sleep 1;
|
||||||
|
reset;
|
||||||
|
"
|
||||||
|
|
||||||
|
saveenv
|
||||||
|
reset
|
||||||
|
|
@ -0,0 +1,200 @@
|
||||||
|
#
|
||||||
|
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||||
|
# into the eMMC
|
||||||
|
#
|
||||||
|
|
||||||
|
echo "######################################################"
|
||||||
|
echo "# Linux firmware install from USB #"
|
||||||
|
echo "######################################################"
|
||||||
|
echo ""
|
||||||
|
echo " This process will erase your eMMC and will install a new"
|
||||||
|
echo " U-Boot and Linux firmware images on the eMMC."
|
||||||
|
echo ""
|
||||||
|
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||||
|
echo " to continue."
|
||||||
|
|
||||||
|
sleep 10
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "Aborted by user.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Since SOMs with the B0 SOC might have an older U-Boot that doesn't export the
|
||||||
|
# SOC revision to the environment, use B0 by default
|
||||||
|
if test -z "${soc_rev}"; then
|
||||||
|
setenv soc_rev B0
|
||||||
|
fi
|
||||||
|
|
||||||
|
# In case this script is used to update to a newer release whose imx-boot file
|
||||||
|
# is not recognized by the SECO fw check, bypass it by default. The script has
|
||||||
|
# the necessary logic to choose the correct imx-boot file for the target's SOC.
|
||||||
|
setenv skip-uboot-check "yes"
|
||||||
|
|
||||||
|
# Determine U-Boot file to program basing on SOM's RAM size and SOC type (linked to bus width)
|
||||||
|
bus_width="32bit"
|
||||||
|
if test -n "${module_ram}" && test -n "${soc_type}"; then
|
||||||
|
if test "${soc_type}" = "imx8dx"; then
|
||||||
|
bus_width="16bit"
|
||||||
|
fi
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-express-${soc_rev}-${module_ram}_${bus_width}.bin;
|
||||||
|
else
|
||||||
|
# Determine U-Boot file to program basing on SOM's variant
|
||||||
|
if test -n "${module_variant}"; then
|
||||||
|
if test "${module_variant}" = "0x01"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-express-${soc_rev}-1GB_32bit.bin;
|
||||||
|
elif test "${module_variant}" = "0x02"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-express-${soc_rev}-2GB_32bit.bin;
|
||||||
|
elif test "${module_variant}" = "0x03"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-express-${soc_rev}-2GB_32bit.bin;
|
||||||
|
elif test "${module_variant}" = "0x04"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-express-${soc_rev}-1GB_16bit.bin;
|
||||||
|
elif test "${module_variant}" = "0x05"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-express-${soc_rev}-1GB_16bit.bin;
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Use 'test -n ...' because 'test -z ...' does not work well on old versions of
|
||||||
|
# u-boot when the checked value is empty.
|
||||||
|
if test -n "${INSTALL_UBOOT_FILENAME}"; then
|
||||||
|
true;
|
||||||
|
else
|
||||||
|
echo "";
|
||||||
|
echo "[ERROR] Cannot determine U-Boot file for this module!";
|
||||||
|
echo "";
|
||||||
|
echo "1. Set variable 'INSTALL_UBOOT_FILENAME' depending on your ConnectCore 8X variant:";
|
||||||
|
echo " - For a QuadXPlus CPU with 1GB LPDDR4, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-express-${soc_rev}-1GB_32bit.bin";
|
||||||
|
echo " - For a QuadXPlus CPU with 2GB LPDDR4, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-express-${soc_rev}-2GB_32bit.bin";
|
||||||
|
echo " - For a DualX CPU with 1GB LPDDR4, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-express-${soc_rev}-1GB_16bit.bin";
|
||||||
|
echo "";
|
||||||
|
echo "2. Run the install script again.";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted";
|
||||||
|
echo "";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
|
||||||
|
setenv INSTALL_USBDEV 0
|
||||||
|
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8x-sbc-express.boot.vfat
|
||||||
|
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8x-sbc-express.recovery.vfat
|
||||||
|
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8x-sbc-express.ext4
|
||||||
|
|
||||||
|
# Check for presence of firmware files on the USB
|
||||||
|
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||||
|
if test ! -e mmc ${INSTALL_USBDEV} ${install_f}; then
|
||||||
|
echo "ERROR: Could not find file ${install_f}";
|
||||||
|
install_abort=1;
|
||||||
|
fi;
|
||||||
|
done
|
||||||
|
if test -n "${install_abort}"; then
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Skip user confirmation for U-Boot update
|
||||||
|
setenv forced_update 1
|
||||||
|
|
||||||
|
# Set bootdelay to zero so that firmware update is run immediately after
|
||||||
|
# the first reset.
|
||||||
|
setenv bootdelay 0
|
||||||
|
|
||||||
|
# Set target MMC device index to eMMC
|
||||||
|
setenv mmcdev 0
|
||||||
|
|
||||||
|
# Update U-Boot
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
update uboot usb ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Set 'bootcmd' to the second part of the script that will
|
||||||
|
# - Reset environment to defaults
|
||||||
|
# - Save the environment
|
||||||
|
# - Force on-the-fly updates to avoid possible verification errors
|
||||||
|
# - Partition the eMMC user data area for Linux
|
||||||
|
# - Update the 'linux' partition
|
||||||
|
# - Update the 'recovery' partition
|
||||||
|
# - Update the 'rootfs' partition
|
||||||
|
# - Configure recovery to wipe 'update' partition
|
||||||
|
# - Disable on-the-fly updates
|
||||||
|
# - Run 'recovery' and let the system boot after
|
||||||
|
setenv bootcmd "
|
||||||
|
env default -a;
|
||||||
|
saveenv;
|
||||||
|
setenv otf-update yes;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Creating Linux partition table on the eMMC\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
run partition_mmc_linux;
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
usb start;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux kernel and device tree files\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update linux usb ${INSTALL_USBDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update linux partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing recovery\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update recovery usb ${INSTALL_USBDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update recovery partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux root file system\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update rootfs usb ${INSTALL_USBDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
setenv boot_recovery yes;
|
||||||
|
setenv recovery_command wipe_update;
|
||||||
|
setenv otf-update;
|
||||||
|
saveenv;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
sleep 1;
|
||||||
|
reset;
|
||||||
|
"
|
||||||
|
|
||||||
|
saveenv
|
||||||
|
reset
|
||||||
|
|
@ -0,0 +1,204 @@
|
||||||
|
#
|
||||||
|
# U-Boot script for installing Linux images created by Yocto from a USB stick
|
||||||
|
# into the eMMC
|
||||||
|
#
|
||||||
|
|
||||||
|
echo "######################################################"
|
||||||
|
echo "# Linux firmware install from USB #"
|
||||||
|
echo "######################################################"
|
||||||
|
echo ""
|
||||||
|
echo " This process will erase your eMMC and will install a new"
|
||||||
|
echo " U-Boot and Linux firmware images on the eMMC."
|
||||||
|
echo ""
|
||||||
|
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||||
|
echo " to continue."
|
||||||
|
|
||||||
|
sleep 10
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "Aborted by user.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Since SOMs with the B0 SOC might have an older U-Boot that doesn't export the
|
||||||
|
# SOC revision to the environment, use B0 by default
|
||||||
|
if test -z "${soc_rev}"; then
|
||||||
|
setenv soc_rev B0
|
||||||
|
fi
|
||||||
|
|
||||||
|
# In case this script is used to update to a newer release whose imx-boot file
|
||||||
|
# is not recognized by the SECO fw check, bypass it by default. The script has
|
||||||
|
# the necessary logic to choose the correct imx-boot file for the target's SOC.
|
||||||
|
setenv skip-uboot-check "yes"
|
||||||
|
|
||||||
|
# Determine U-Boot file to program basing on SOM's RAM size and SOC type (linked to bus width)
|
||||||
|
bus_width="32bit"
|
||||||
|
if test -n "${module_ram}" && test -n "${soc_type}"; then
|
||||||
|
if test "${soc_type}" = "imx8dx"; then
|
||||||
|
bus_width="16bit"
|
||||||
|
fi
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-${module_ram}_${bus_width}.bin;
|
||||||
|
else
|
||||||
|
# Determine U-Boot file to program basing on SOM's variant
|
||||||
|
if test -n "${module_variant}"; then
|
||||||
|
if test "${module_variant}" = "0x01"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-1GB_32bit.bin;
|
||||||
|
elif test "${module_variant}" = "0x02"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-2GB_32bit.bin;
|
||||||
|
elif test "${module_variant}" = "0x03"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-2GB_32bit.bin;
|
||||||
|
elif test "${module_variant}" = "0x04"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-1GB_16bit.bin;
|
||||||
|
elif test "${module_variant}" = "0x05"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-1GB_16bit.bin;
|
||||||
|
elif test "${module_variant}" = "0x06"; then
|
||||||
|
setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-512MB_16bit.bin;
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Use 'test -n ...' because 'test -z ...' does not work well on old versions of
|
||||||
|
# u-boot when the checked value is empty.
|
||||||
|
if test -n "${INSTALL_UBOOT_FILENAME}"; then
|
||||||
|
true;
|
||||||
|
else
|
||||||
|
echo "";
|
||||||
|
echo "[ERROR] Cannot determine U-Boot file for this module!";
|
||||||
|
echo "";
|
||||||
|
echo "1. Set variable 'INSTALL_UBOOT_FILENAME' depending on your ConnectCore 8X variant:";
|
||||||
|
echo " - For a QuadXPlus CPU with 1GB LPDDR4, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-1GB_32bit.bin";
|
||||||
|
echo " - For a QuadXPlus CPU with 2GB LPDDR4, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-2GB_32bit.bin";
|
||||||
|
echo " - For a DualX CPU with 1GB LPDDR4, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-1GB_16bit.bin";
|
||||||
|
echo " - For a DualX CPU with 512MB LPDDR4, run:";
|
||||||
|
echo " => setenv INSTALL_UBOOT_FILENAME imx-boot-ccimx8x-sbc-pro-${soc_rev}-512MB_16bit.bin";
|
||||||
|
echo "";
|
||||||
|
echo "2. Run the install script again.";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted";
|
||||||
|
echo "";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
|
||||||
|
setenv INSTALL_USBDEV 0
|
||||||
|
setenv INSTALL_LINUX_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8x-sbc-pro.boot.vfat
|
||||||
|
setenv INSTALL_RECOVERY_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8x-sbc-pro.recovery.vfat
|
||||||
|
setenv INSTALL_ROOTFS_FILENAME dey-image-qt-##GRAPHICAL_BACKEND##-ccimx8x-sbc-pro.ext4
|
||||||
|
|
||||||
|
# Check for presence of firmware files on the USB
|
||||||
|
for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_RECOVERY_FILENAME} ${INSTALL_ROOTFS_FILENAME}; do
|
||||||
|
if test ! -e usb ${INSTALL_USBDEV} ${install_f}; then
|
||||||
|
echo "ERROR: Could not find file ${install_f}";
|
||||||
|
install_abort=1;
|
||||||
|
fi;
|
||||||
|
done
|
||||||
|
if test -n "${install_abort}"; then
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Skip user confirmation for U-Boot update
|
||||||
|
setenv forced_update 1
|
||||||
|
|
||||||
|
# Set bootdelay to zero so that firmware update is run immediately after
|
||||||
|
# the first reset.
|
||||||
|
setenv bootdelay 0
|
||||||
|
|
||||||
|
# Set target MMC device index to eMMC
|
||||||
|
setenv mmcdev 0
|
||||||
|
|
||||||
|
# Update U-Boot
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||||
|
echo ""
|
||||||
|
echo ""
|
||||||
|
update uboot usb ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||||
|
if test $? -eq 1; then
|
||||||
|
echo "[ERROR] Failed to update U-Boot boot loader!";
|
||||||
|
echo "";
|
||||||
|
echo "Aborted.";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Set 'bootcmd' to the second part of the script that will
|
||||||
|
# - Reset environment to defaults
|
||||||
|
# - Save the environment
|
||||||
|
# - Force on-the-fly updates to avoid possible verification errors
|
||||||
|
# - Partition the eMMC user data area for Linux
|
||||||
|
# - Update the 'linux' partition
|
||||||
|
# - Update the 'recovery' partition
|
||||||
|
# - Update the 'rootfs' partition
|
||||||
|
# - Configure recovery to wipe 'update' partition
|
||||||
|
# - Disable on-the-fly updates
|
||||||
|
# - Run 'recovery' and let the system boot after
|
||||||
|
setenv bootcmd "
|
||||||
|
env default -a;
|
||||||
|
saveenv;
|
||||||
|
setenv otf-update yes;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Creating Linux partition table on the eMMC\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
run partition_mmc_linux;
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to create Linux partition table!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
usb start;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux kernel and device tree files\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update linux usb ${INSTALL_USBDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update linux partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing recovery\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update recovery usb ${INSTALL_USBDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update recovery partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Installing Linux root file system\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
update rootfs usb ${INSTALL_USBDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||||
|
if test \$? -eq 1; then
|
||||||
|
echo \"[ERROR] Failed to update rootfs partition!\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"Aborted.\";
|
||||||
|
exit;
|
||||||
|
fi;
|
||||||
|
echo \"\";
|
||||||
|
setenv boot_recovery yes;
|
||||||
|
setenv recovery_command wipe_update;
|
||||||
|
setenv otf-update;
|
||||||
|
saveenv;
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
echo \">> Firmware installation complete. Rebooting into recovery mode for final deployment.\";
|
||||||
|
echo \"\";
|
||||||
|
echo \"\";
|
||||||
|
sleep 1;
|
||||||
|
reset;
|
||||||
|
"
|
||||||
|
|
||||||
|
saveenv
|
||||||
|
reset
|
||||||
|
|
@ -21,7 +21,8 @@ FSTYPES_WHITELIST = " \
|
||||||
|
|
||||||
generate_installer_zip () {
|
generate_installer_zip () {
|
||||||
# Get list of files to pack
|
# Get list of files to pack
|
||||||
INSTALLER_FILELIST="${DEPLOY_DIR_IMAGE}/install_linux_fw_sd.scr"
|
INSTALLER_FILELIST="${DEPLOY_DIR_IMAGE}/install_linux_fw_sd.scr \
|
||||||
|
${DEPLOY_DIR_IMAGE}/install_linux_fw_usb.scr"
|
||||||
# Get UUU installation script
|
# Get UUU installation script
|
||||||
if readlink -e "${DEPLOY_DIR_IMAGE}/install_linux_fw_uuu.sh"; then
|
if readlink -e "${DEPLOY_DIR_IMAGE}/install_linux_fw_uuu.sh"; then
|
||||||
INSTALLER_FILELIST="${INSTALLER_FILELIST} ${DEPLOY_DIR_IMAGE}/install_linux_fw_uuu.sh"
|
INSTALLER_FILELIST="${INSTALLER_FILELIST} ${DEPLOY_DIR_IMAGE}/install_linux_fw_uuu.sh"
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue