install_linux_fw: reset bootcount before resetting target

During firmware install, the target may be reset several times.
We don't want the bootcount to count these as boot attempts.

This was done in a791bb4463 for the ccmp1
but not for the rest of platforms.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6qpsbc/install_linux_fw_sd.txt

@@ -260,6 +260,7 @@ setenv bootcmd "
 		setenv boot_recovery yes;
 		setenv recovery_command wipe_update;
 	fi;
+	setenv bootcount 0;
 	saveenv;
 	echo \"\";
 	echo \"\";
@@ -273,5 +274,6 @@ setenv bootcmd "
 	reset;
 "
 
+setenv bootcount 0
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6qpsbc/install_linux_fw_usb.txt

@@ -263,6 +263,7 @@ setenv bootcmd "
 		setenv boot_recovery yes;
 		setenv recovery_command wipe_update;
 	fi;
+	setenv bootcount 0;
 	saveenv;
 	echo \"\";
 	echo \"\";
@@ -276,5 +277,6 @@ setenv bootcmd "
 	reset;
 "
 
+setenv bootcount 0
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6qpsbc/install_linux_fw_uuu.sh

@@ -240,6 +240,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 
 # Set 'bootcmd' for the second part of the script that will
 #  - Reset environment to defaults
+#  - Reset the bootcount
 #  - Save the environment
 #  - Partition the eMMC user data area for Linux
 #  - Update the 'linux' partition
@@ -248,6 +249,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 uuu fb: ucmd setenv bootcmd "
 	env default -a;
 	setenv dualboot \${dualboot};
+	setenv bootcount 0
 	saveenv;
 	echo \"\";
 	echo \"\";
@@ -315,6 +317,8 @@ if [ "${DUALBOOT}" != true ]; then
 	uuu fb: ucmd setenv boot_recovery yes
 	uuu fb: ucmd setenv recovery_command wipe_update
 fi
+# Reset the bootcount
+uuu fb: ucmd setenv bootcount 0
 uuu fb: ucmd saveenv
 
 # Reset the target

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6sbc/install_linux_fw_sd.txt

@@ -271,6 +271,7 @@ setenv bootcmd "
 		setenv boot_recovery yes;
 		setenv recovery_command wipe_update;
 	fi;
+	setenv bootcount 0;
 	saveenv;
 	echo \"\";
 	echo \"\";
@@ -284,5 +285,6 @@ setenv bootcmd "
 	reset;
 "
 
+setenv bootcount 0
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6sbc/install_linux_fw_usb.txt

@@ -274,6 +274,7 @@ setenv bootcmd "
 		setenv boot_recovery yes;
 		setenv recovery_command wipe_update;
 	fi;
+	setenv bootcount 0;
 	saveenv;
 	echo \"\";
 	echo \"\";
@@ -287,5 +288,6 @@ setenv bootcmd "
 	reset;
 "
 
+setenv bootcount 0
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6sbc/install_linux_fw_uuu.sh

@@ -258,6 +258,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 
 # Set 'bootcmd' for the second part of the script that will
 #  - Reset environment to defaults
+#  - Reset the bootcount
 #  - Save the environment
 #  - Partition the eMMC user data area for Linux
 #  - Update the 'linux' partition
@@ -266,6 +267,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 uuu fb: ucmd setenv bootcmd "
 	env default -a;
 	setenv dualboot \${dualboot};
+	setenv bootcount 0
 	saveenv;
 	echo \"\";
 	echo \"\";
@@ -333,6 +335,8 @@ if [ "${DUALBOOT}" != true ]; then
 	uuu fb: ucmd setenv boot_recovery yes
 	uuu fb: ucmd setenv recovery_command wipe_update
 fi
+# Reset the bootcount
+uuu fb: ucmd setenv bootcount 0
 uuu fb: ucmd saveenv
 
 # Reset the target

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6ul/install_linux_fw_sd.txt

@@ -276,8 +276,10 @@ setenv bootcmd "
 	echo \"\";
 	echo \"\";
 	sleep 1;
+	bootcount reset;
 	reset;
 "
 
+bootcount reset
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6ul/install_linux_fw_usb.txt

@@ -279,8 +279,10 @@ setenv bootcmd "
 	echo \"\";
 	echo \"\";
 	sleep 1;
+	bootcount reset;
 	reset;
 "
 
+bootcount reset
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx6ul/install_linux_fw_uuu.sh

@@ -249,6 +249,7 @@ part_update "uboot" "${INSTALL_UBOOT_FILENAME}" 5000
 
 # Set 'bootcmd' for the second part of the script that will
 #  - Reset environment to defaults
+#  - Reset the bootcount
 #  - Save the environment
 #  - Update the 'linux' partition
 #  - Update the 'recovery' partition
@@ -257,6 +258,7 @@ part_update "uboot" "${INSTALL_UBOOT_FILENAME}" 5000
 uuu fb: ucmd setenv bootcmd "
 	env default -a;
 	setenv dualboot \${dualboot};
+	bootcount reset;
 	setenv singlemtdsys \${singlemtdsys};
 	saveenv;
 	echo \"\";
@@ -324,6 +326,8 @@ fi
 
 uuu fb: ucmd saveenv
 
+# Reset the bootcount
+uuu fb: ucmd bootcount reset
 # Reset the target
 uuu fb: acmd reset
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8m/install_linux_fw_sd.txt

@@ -248,8 +248,10 @@ setenv bootcmd "
 	echo \"\";
 	echo \"\";
 	sleep 1;
+	bootcount reset;
 	reset;
 "
 
+bootcount reset
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8m/install_linux_fw_usb.txt

@@ -249,8 +249,10 @@ setenv bootcmd "
 	echo \"\";
 	echo \"\";
 	sleep 1;
+	bootcount reset;
 	reset;
 "
 
+bootcount reset
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8m/install_linux_fw_uuu.sh

@@ -209,6 +209,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 
 # Set 'bootcmd' for the second part of the script that will
 #  - Reset environment to defaults
+#  - Reset the bootcount
 #  - Save the environment
 #  - Partition the eMMC user data area for Linux
 #  - Update the 'linux' partition
@@ -217,6 +218,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 uuu fb: ucmd setenv bootcmd "
 	env default -a;
 	setenv dualboot \${dualboot};
+	bootcount reset;
 	saveenv;
 	echo \"\";
 	echo \"\";
@@ -286,6 +288,8 @@ if [ "${DUALBOOT}" != true ]; then
 fi
 uuu fb: ucmd saveenv
 
+# Reset the bootcount
+uuu fb: ucmd bootcount reset
 # Reset the target
 uuu fb: acmd reset
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8x/install_linux_fw_sd.txt

@@ -260,8 +260,10 @@ setenv bootcmd "
 	echo \"\";
 	echo \"\";
 	sleep 1;
+	bootcount reset;
 	reset;
 "
 
+bootcount reset
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8x/install_linux_fw_usb.txt

@@ -263,8 +263,10 @@ setenv bootcmd "
 	echo \"\";
 	echo \"\";
 	sleep 1;
+	bootcount reset;
 	reset;
 "
 
+bootcount reset
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx8x/install_linux_fw_uuu.sh

@@ -213,6 +213,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 
 # Set 'bootcmd' for the second part of the script that will
 #  - Reset environment to defaults
+#  - Reset the bootcount
 #  - Save the environment
 #  - Partition the eMMC user data area for Linux
 #  - Update the 'linux' partition
@@ -221,6 +222,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 uuu fb: ucmd setenv bootcmd "
 	env default -a;
 	setenv dualboot \${dualboot};
+	bootcount reset;
 	saveenv;
 	echo \"\";
 	echo \"\";
@@ -290,6 +292,8 @@ if [ "${DUALBOOT}" != true ]; then
 fi
 uuu fb: ucmd saveenv
 
+# Reset the bootcount
+uuu fb: ucmd bootcount reset
 # Reset the target
 uuu fb: acmd reset
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx93/install_linux_fw_sd.txt

@@ -246,8 +246,10 @@ setenv bootcmd "
 	echo \"\";
 	echo \"\";
 	sleep 1;
+	bootcount reset;
 	reset;
 "
 
+bootcount reset
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx93/install_linux_fw_usb.txt

@@ -247,8 +247,10 @@ setenv bootcmd "
 	echo \"\";
 	echo \"\";
 	sleep 1;
+	bootcount reset;
 	reset;
 "
 
+bootcount reset
 saveenv
 reset

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccimx93/install_linux_fw_uuu.sh

@@ -209,6 +209,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 
 # Set 'bootcmd' for the second part of the script that will
 #  - Reset environment to defaults
+#  - Reset the bootcount
 #  - Save the environment
 #  - Partition the eMMC user data area for Linux
 #  - Update the 'linux' partition
@@ -217,6 +218,7 @@ uuu fb: ucmd mmc partconf 0 1 1 1
 uuu fb: ucmd setenv bootcmd "
 	env default -a;
 	setenv dualboot \${dualboot};
+	bootcount reset;
 	saveenv;
 	echo \"\";
 	echo \"\";
@@ -286,6 +288,8 @@ if [ "${DUALBOOT}" != true ]; then
 fi
 uuu fb: ucmd saveenv
 
+# Reset the bootcount
+uuu fb: ucmd bootcount reset
 # Reset the target
 uuu fb: acmd reset
 

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey/ccmp1/install_linux_fw_uuu.sh

@@ -297,8 +297,9 @@ if [ "${SQUASHFS}" = true ]; then
 	uuu fb: ucmd saveenv
 fi
 
-# Reset the target
+# Reset the bootcount
 uuu fb: ucmd bootcount reset
+# Reset the target
 uuu fb: acmd reset
 
 echo "\033[32m"