meta-digi-arm: add support for ConnectCore MP25 DVK platform
https://onedigi.atlassian.net/browse/DEL-8995 Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit is contained in:
Arturo Buzarra
parent
9af1e6c322
commit
9d5ce6c707
|
|
@ -0,0 +1,138 @@
|
|||
#@TYPE: Machine
|
||||
#@NAME: ccmp25-dvk
|
||||
#@DESCRIPTION: Configuration for Digi ConnectCore MP25 DVK
|
||||
#@NEEDED_BSPLAYERS: layers/meta-digi
|
||||
|
||||
# Include the machine configuration for Digi's ConnectCore MP2.
|
||||
include conf/machine/include/ccmp2.inc
|
||||
|
||||
# Define specific familly common machine name
|
||||
DIGI_SOM = "ccmp25"
|
||||
MACHINEOVERRIDES =. "stm32mp2common:stm32mp25common:${DIGI_FAMILY}:${DIGI_SOM}:"
|
||||
|
||||
# =========================================================================
|
||||
# SOC
|
||||
# =========================================================================
|
||||
STM32MP_SOC_NAME = "stm32mp25"
|
||||
|
||||
# =========================================================================
|
||||
# Chip architecture
|
||||
# =========================================================================
|
||||
DEFAULTTUNE = "cortexa35"
|
||||
include conf/machine/include/arm/armv8a/tune-cortexa35.inc
|
||||
|
||||
# =========================================================================
|
||||
# boot device
|
||||
# =========================================================================
|
||||
# Configure the list of boards that enable EMMC/SDCARD
|
||||
DEVICE_BOARD_ENABLE:EMMC += "${STM32MP_DEVICETREE}"
|
||||
DEVICE_BOARD_ENABLE:SDCARD += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'sdcard', '${STM32MP_DEVICETREE}', '', d)}"
|
||||
|
||||
# =========================================================================
|
||||
# U-Boot configs
|
||||
# =========================================================================
|
||||
# Last one is the default (the one the symlinks point at)
|
||||
UBOOT_CONFIG = "ccmp25-dvk"
|
||||
UBOOT_CONFIG[ccmp25-dvk] = "ccmp25-dvk_defconfig,,u-boot-dtb.${UBOOT_SUFFIX}"
|
||||
|
||||
# =========================================================================
|
||||
# Machine settings
|
||||
# =========================================================================
|
||||
# Define list of devicetree per supported storage
|
||||
STM32MP_DEVICETREE ??= "ccmp25-dvk"
|
||||
# Extra DTB for board - need to specify it with .dtb ...
|
||||
STM32MP_KERNEL_DEVICETREE:ccmp25-dvk += " \
|
||||
ccmp25-dvk.dtb \
|
||||
_ov_board_e55rb-i-mw346-c-mipi-dsi_ccmp25-dvk.dtbo \
|
||||
_ov_board_g101evn010-lvds_ccmp25-dvk.dtbo \
|
||||
_ov_board_mikroe-accel2-click_ccmp25-dvk.dtbo \
|
||||
_ov_board_mikroe-gyro-click_ccmp25-dvk.dtbo \
|
||||
_ov_board_mikroe-i2c-to-spi-click_ccmp25-dvk.dtbo \
|
||||
_ov_board_mikroe-mcp2518fd-click_ccmp25-dvk.dtbo \
|
||||
_ov_board_n25q256a-spi-nor-flash_ccmp25-dvk.dtbo \
|
||||
_ov_board_nhd-3-5-640480ef-msxp-mipi-dsi_ccmp25-dvk.dtbo \
|
||||
_ov_board_usb-3-0-typec_ccmp25-dvk.dtbo \
|
||||
_ov_som_bt_ccmp25.dtbo \
|
||||
_ov_som_wifi_ccmp25.dtbo \
|
||||
"
|
||||
|
||||
# =========================================================================
|
||||
# optee
|
||||
# =========================================================================
|
||||
# Map OPTEE configuration to device tree list
|
||||
OPTEE_CONF = "${STM32MP_DEVICETREE}"
|
||||
|
||||
# =========================================================================
|
||||
# Machine features
|
||||
# =========================================================================
|
||||
MACHINE_FEATURES += "splashscreen"
|
||||
MACHINE_FEATURES += "watchdog"
|
||||
MACHINE_FEATURES += "bluetooth"
|
||||
MACHINE_FEATURES += "wifi"
|
||||
MACHINE_FEATURES += "usbg0"
|
||||
|
||||
# GPU
|
||||
MACHINE_FEATURES += "${@'gpu' if d.getVar('ACCEPT_EULA_'+d.getVar('MACHINE')) == '1' else ''}"
|
||||
MACHINE_FEATURES += "openvx"
|
||||
MACHINE_FEATURES += "opencl"
|
||||
MACHINE_FEATURES += "vulkan"
|
||||
|
||||
# M33
|
||||
MACHINE_FEATURES += "m33copro"
|
||||
|
||||
# Disable external dt
|
||||
EXTERNAL_DT_ENABLED = "0"
|
||||
|
||||
# Flashlayout
|
||||
# No metadata generated and supported for the moment
|
||||
STM32MP_METADATA_DATA ?= ""
|
||||
|
||||
# GPU have vulkan
|
||||
DISTRO_FEATURES:append = " ${@bb.utils.contains('DISTRO', 'openstlinux-eglfs', '', 'vulkan', d)} "
|
||||
DISTRO_FEATURES:append = " opencl "
|
||||
|
||||
# =========================================================================
|
||||
# Firmware
|
||||
# =========================================================================
|
||||
MACHINE_FIRMWARE:append = " firmware-murata-infineon firmware-murata-infineon-mfgtest"
|
||||
|
||||
MACHINE_EXTRA_RRECOMMENDS += " \
|
||||
${MACHINE_FIRMWARE} \
|
||||
"
|
||||
|
||||
# =========================================================================
|
||||
# Image
|
||||
# =========================================================================
|
||||
# Image FS types
|
||||
IMAGE_FSTYPES += '${@bb.utils.contains("IMAGE_FEATURES", "read-only-rootfs", \
|
||||
"boot.vfat recovery.vfat squashfs tar.bz2", \
|
||||
"boot.vfat recovery.vfat ext4.gz tar.bz2", d)}'
|
||||
|
||||
# Default image for install scripts
|
||||
DEFAULT_IMAGE_NAME ?= "dey-image-qt"
|
||||
|
||||
# Remove additional bluetooth packages
|
||||
MACHINE_BLUETOOTH_EXTRA_INSTALL = ""
|
||||
|
||||
# For populate_sdk, gcc-arm-none-eabi_11 has a libpython3 dependency, so we remove it.
|
||||
ST_TOOLS_FOR_SDK:remove = "nativesdk-gcc-arm-none-eabi"
|
||||
|
||||
# XBee
|
||||
XBEE_RESET_N_GPIO ?= "GPIOD@6"
|
||||
XBEE_SLEEP_RQ_GPIO ?= ""
|
||||
XBEE_TTY ?= "ttySTM2"
|
||||
|
||||
# =========================================================================
|
||||
# alsa
|
||||
# =========================================================================
|
||||
ALSA_LIST = ""
|
||||
|
||||
# Disable use of vendorfs and userfs partitions
|
||||
ST_VENDORFS = "0"
|
||||
ST_USERFS = "0"
|
||||
|
||||
# Per-machine DISTRO_FEATURES customization
|
||||
MACHINE_DISTRO_FEATURES_REMOVE = "x11"
|
||||
|
||||
# Default ROOTFS max size for image being built to this value
|
||||
IMAGE_ROOTFS_MAXSIZE = "1572864"
|
||||
|
|
@ -0,0 +1,87 @@
|
|||
#@TYPE: Machine
|
||||
#@NAME: ConnectCore for STM32MP2.
|
||||
#@DESCRIPTION: Machine configuration for Digi's ConnectCore MP2.
|
||||
|
||||
include conf/machine/include/st-machine-common-stm32mp.inc
|
||||
include conf/machine/include/digi-defaults.inc
|
||||
|
||||
DIGI_FAMILY = "ccmp2"
|
||||
|
||||
# Platform u-boot settings
|
||||
UBOOT_PREFIX = "fip"
|
||||
UBOOT_SUFFIX = "bin"
|
||||
# Set U-Boot FIP settings
|
||||
FIP_UBOOT_DTB = "u-boot"
|
||||
|
||||
# =========================================================================
|
||||
# trusted-firmware-a
|
||||
# =========================================================================
|
||||
PREFERRED_PROVIDER_virtual/trusted-firmware-a = "tf-a-stm32mp"
|
||||
PREFERRED_VERSION_tf-a-stm32mp ?= "v2.8%"
|
||||
|
||||
# Configure use of BL31
|
||||
FIP_BL31_ENABLE = "1"
|
||||
|
||||
# =========================================================================
|
||||
# optee-os
|
||||
# =========================================================================
|
||||
PREFERRED_PROVIDER_virtual/optee-os = "optee-os-stm32mp"
|
||||
PREFERRED_VERSION_optee-os-stm32mp ?= "3.19%"
|
||||
|
||||
PREFERRED_VERSION_gcnano-driver-stm32mp ?= "6.4.15%"
|
||||
PREFERRED_VERSION_gcnano-userland-multi-binary-stm32mp ?= "6.4.15%"
|
||||
|
||||
PREFERRED_VERSION_nativesdk-tf-a-tools ?= "v2.8%"
|
||||
PREFERRED_VERSION_tf-a-tools-native ?= "v2.8%"
|
||||
|
||||
# =========================================================================
|
||||
# Kernel
|
||||
# =========================================================================
|
||||
KERNEL_IMAGETYPE = "${@bb.utils.contains('TRUSTFENCE_FIT_IMG', '1', 'fitImage', 'Image.gz', d)}"
|
||||
KERNEL_CLASSES = "${@bb.utils.contains('TRUSTFENCE_FIT_IMG', '1', 'kernel-fitimage', 'kernel-uimage', d)}"
|
||||
KERNEL_ALT_IMAGETYPE = "vmlinux"
|
||||
KERNEL_DEFCONFIG ?= "arch/arm64/configs/ccmp2_defconfig"
|
||||
|
||||
STORAGE_MEDIA = "mmc"
|
||||
|
||||
# Enable STM specific features
|
||||
DEY_SOC_VENDOR = "STM"
|
||||
|
||||
# SWUpdate sw-description configuration
|
||||
BOOTFS_EXT ?= ".boot.vfat"
|
||||
ROOTFS_EXT ?= '${@bb.utils.contains("IMAGE_FEATURES", "read-only-rootfs", ".squashfs", ".ext4.gz", d)}'
|
||||
|
||||
BOOT_DEV_NAME ?= "/dev/mmcblk0p6"
|
||||
ROOTFS_DEV_NAME ?= "/dev/mmcblk0p8"
|
||||
ROOTFS_ENC_DEV = "/dev/mapper/cryptrootfs"
|
||||
ROOTFS_DEV_NAME_FINAL = "${@oe.utils.ifelse(d.getVar('TRUSTFENCE_ENCRYPT_ROOTFS') == '1', '${ROOTFS_ENC_DEV}', '${ROOTFS_DEV_NAME}')}"
|
||||
|
||||
# List of supported boot devices
|
||||
BOOTDEVICE_LABELS ?= "emmc"
|
||||
# Supported boot schemes
|
||||
BOOTSCHEME_LABELS ?= "optee"
|
||||
|
||||
MACHINE_EXTRA_RRECOMMENDS:remove = "kernel-imagebootfs"
|
||||
|
||||
MACHINE_EXTRA_RDEPENDS += " \
|
||||
e2fsprogs-mke2fs \
|
||||
e2fsprogs-resize2fs \
|
||||
mtd-utils-ubifs \
|
||||
parted \
|
||||
xbee-init \
|
||||
"
|
||||
|
||||
# =========================================================================
|
||||
# Signing configuration
|
||||
# =========================================================================
|
||||
ENCRYPT_ENABLE ?= "0"
|
||||
ENCRYPT_SUFFIX ?= "_Encrypted"
|
||||
|
||||
SIGN_ENABLE ?= "0"
|
||||
SIGN_SUFFIX ?= "_Signed"
|
||||
|
||||
# =========================================================================
|
||||
# Debug trace
|
||||
# =========================================================================
|
||||
# activate/deactivate the debug and trace on boot stage
|
||||
ST_DEBUG_TRACE = "0"
|
||||
|
|
@ -20,6 +20,7 @@ PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
|
|||
# ccimx93 6.1 2023.04 (packaged in imx-boot)
|
||||
# ccmp15 5.15 2021.10
|
||||
# ccmp13 5.15 2021.10
|
||||
# ccmp25 6.1 2022.10
|
||||
#
|
||||
|
||||
# Help variables used in recipes
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
#
|
||||
# build-github.sh
|
||||
#
|
||||
# Copyright (C) 2015-2023 by Digi International Inc.
|
||||
# Copyright (C) 2015-2024 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -157,6 +157,7 @@ done<<-_EOF_
|
|||
ccimx6ulstarter core-image-base
|
||||
ccmp15-dvk dey-image-webkit
|
||||
ccmp13-dvk core-image-base
|
||||
ccmp25-dvk dey-image-qt
|
||||
ccimx93-dvk dey-image-qt
|
||||
_EOF_
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
#
|
||||
# build.sh
|
||||
#
|
||||
# Copyright (C) 2013-2023 by Digi International Inc.
|
||||
# Copyright (C) 2013-2024 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -184,6 +184,7 @@ done<<-_EOF_
|
|||
ccimx6ulrftest dey-image-mft-module-rf
|
||||
ccmp15-dvk dey-image-qt,dey-image-crank,dey-image-webkit,dey-image-lvgl
|
||||
ccmp13-dvk core-image-base
|
||||
ccmp25-dvk dey-image-qt,dey-image-webkit,dey-image-lvgl
|
||||
ccimx93-dvk dey-image-qt,dey-image-lvgl
|
||||
_EOF_
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,24 @@
|
|||
# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
|
||||
# changes incompatibly
|
||||
POKY_BBLAYERS_CONF_VERSION = "2"
|
||||
|
||||
BBPATH = "${TOPDIR}"
|
||||
BBFILES ?= ""
|
||||
|
||||
BBLAYERS ?= " \
|
||||
##OEROOT##/meta \
|
||||
##OEROOT##/meta-poky \
|
||||
##OEROOT##/meta-yocto-bsp \
|
||||
##DIGIBASE##/meta-openembedded/meta-oe \
|
||||
##DIGIBASE##/meta-openembedded/meta-python \
|
||||
##DIGIBASE##/meta-openembedded/meta-networking \
|
||||
##DIGIBASE##/meta-openembedded/meta-webserver \
|
||||
##DIGIBASE##/meta-qt5 \
|
||||
##DIGIBASE##/meta-swupdate \
|
||||
##DIGIBASE##/meta-webkit \
|
||||
##DIGIBASE##/meta-timesys \
|
||||
##DIGIBASE##/meta-st-stm32mp \
|
||||
##DIGIBASE##/meta-st-stm32mpu-ai \
|
||||
##DIGIBASE##/meta-digi/meta-digi-arm \
|
||||
##DIGIBASE##/meta-digi/meta-digi-dey \
|
||||
"
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
Digi Embedded Yocto provides the following image recipes:
|
||||
|
||||
* dey-image-webkit: graphical WebKit image
|
||||
|
||||
By default the image is Wayland-based so it provides a full Weston
|
||||
desktop environment.
|
||||
|
||||
* dey-image-qt: graphical QT image
|
||||
|
||||
By default the image is Wayland-based so it provides a full Weston
|
||||
desktop environment.
|
||||
|
||||
* dey-image-lvgl: graphical LVGL image
|
||||
|
||||
By default the image is Wayland-based so it provides a full Weston
|
||||
desktop environment.
|
||||
|
||||
* core-image-base: a console-only image
|
||||
|
||||
Expansion of native core-image-base by including all the support for the
|
||||
target device hardware like firmware files, rootfs customizations, etc.
|
||||
|
|
@ -0,0 +1,293 @@
|
|||
#
|
||||
# This file is your local configuration file and is where all local user settings
|
||||
# are placed. The comments in this file give some guide to the options a new user
|
||||
# to the system might want to change but pretty much any configuration option can
|
||||
# be set in this file. More adventurous users can look at
|
||||
# local.conf.sample.extended which contains other examples of configuration which
|
||||
# can be placed in this file but new users likely won't need any of them
|
||||
# initially.
|
||||
#
|
||||
# Lines starting with the '#' character are commented out and in some cases the
|
||||
# default values are provided as comments to show people example syntax. Enabling
|
||||
# the option is a question of removing the # character and making any change to the
|
||||
# variable as required.
|
||||
|
||||
#
|
||||
# Machine Selection
|
||||
#
|
||||
# You need to select a specific machine to target the build with. There are a selection
|
||||
# of emulated machines available which can boot and run in the QEMU emulator:
|
||||
#
|
||||
#MACHINE ?= "qemuarm"
|
||||
#MACHINE ?= "qemuarm64"
|
||||
#MACHINE ?= "qemumips"
|
||||
#MACHINE ?= "qemumips64"
|
||||
#MACHINE ?= "qemuppc"
|
||||
#MACHINE ?= "qemux86"
|
||||
#MACHINE ?= "qemux86-64"
|
||||
#
|
||||
# There are also the following hardware board target machines included for
|
||||
# demonstration purposes:
|
||||
#
|
||||
#MACHINE ?= "beaglebone-yocto"
|
||||
#MACHINE ?= "genericx86"
|
||||
#MACHINE ?= "genericx86-64"
|
||||
#MACHINE ?= "edgerouter"
|
||||
#
|
||||
# This sets the default machine to be qemux86-64 if no other machine is selected:
|
||||
#MACHINE ??= "qemux86-64"
|
||||
|
||||
MACHINE = "ccmp25-dvk"
|
||||
|
||||
#
|
||||
# Use Digi's internal git repositories
|
||||
#
|
||||
#DIGI_INTERNAL_GIT ?= "1"
|
||||
|
||||
#
|
||||
# Where to place downloads
|
||||
#
|
||||
# During a first build the system will download many different source code tarballs
|
||||
# from various upstream projects. This can take a while, particularly if your network
|
||||
# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
|
||||
# can preserve this directory to speed up this part of subsequent builds. This directory
|
||||
# is safe to share between multiple builds on the same machine too.
|
||||
#
|
||||
# The default is a downloads directory under TOPDIR which is the build directory.
|
||||
#
|
||||
#DL_DIR ?= "${TOPDIR}/downloads"
|
||||
|
||||
#
|
||||
# Where to place shared-state files
|
||||
#
|
||||
# BitBake has the capability to accelerate builds based on previously built output.
|
||||
# This is done using "shared state" files which can be thought of as cache objects
|
||||
# and this option determines where those files are placed.
|
||||
#
|
||||
# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
|
||||
# from these files if no changes were made to the configuration. If changes were made
|
||||
# to the configuration, only shared state files where the state was still valid would
|
||||
# be used (done using checksums).
|
||||
#
|
||||
# The default is a sstate-cache directory under TOPDIR.
|
||||
#
|
||||
#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
|
||||
|
||||
#
|
||||
# Where to place the build output
|
||||
#
|
||||
# This option specifies where the bulk of the building work should be done and
|
||||
# where BitBake should place its temporary files and output. Keep in mind that
|
||||
# this includes the extraction and compilation of many applications and the toolchain
|
||||
# which can use Gigabytes of hard disk space.
|
||||
#
|
||||
# The default is a tmp directory under TOPDIR.
|
||||
#
|
||||
#TMPDIR = "${TOPDIR}/tmp"
|
||||
|
||||
#
|
||||
# Default policy config
|
||||
#
|
||||
# The distribution setting controls which policy settings are used as defaults.
|
||||
# The default value is fine for general Yocto project use, at least initially.
|
||||
# Ultimately when creating custom policy, people will likely end up subclassing
|
||||
# these defaults.
|
||||
#
|
||||
DISTRO ?= "dey"
|
||||
# As an example of a subclass there is a "bleeding" edge policy configuration
|
||||
# where many versions are set to the absolute latest code from the upstream
|
||||
# source control systems. This is just mentioned here as an example, its not
|
||||
# useful to most new users.
|
||||
# DISTRO ?= "poky-bleeding"
|
||||
|
||||
#
|
||||
# Package Management configuration
|
||||
#
|
||||
# This variable lists which packaging formats to enable. Multiple package backends
|
||||
# can be enabled at once and the first item listed in the variable will be used
|
||||
# to generate the root filesystems.
|
||||
# Options are:
|
||||
# - 'package_deb' for debian style deb files
|
||||
# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
|
||||
# - 'package_rpm' for rpm style packages
|
||||
# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
|
||||
# We default to rpm:
|
||||
PACKAGE_CLASSES ?= "package_rpm"
|
||||
|
||||
#
|
||||
# SDK target architecture
|
||||
#
|
||||
# This variable specifies the architecture to build SDK items for and means
|
||||
# you can build the SDK packages for architectures other than the machine you are
|
||||
# running the build on (i.e. building i686 packages on an x86_64 host).
|
||||
# Supported values are i686, x86_64, aarch64
|
||||
#SDKMACHINE ?= "i686"
|
||||
|
||||
#
|
||||
# Extra image configuration defaults
|
||||
#
|
||||
# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
|
||||
# images. Some of these options are added to certain image types automatically. The
|
||||
# variable can contain the following options:
|
||||
# "dbg-pkgs" - add -dbg packages for all installed packages
|
||||
# (adds symbol information for debugging/profiling)
|
||||
# "src-pkgs" - add -src packages for all installed packages
|
||||
# (adds source code for debugging)
|
||||
# "dev-pkgs" - add -dev packages for all installed packages
|
||||
# (useful if you want to develop against libs in the image)
|
||||
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
|
||||
# (useful if you want to run the package test suites)
|
||||
# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
|
||||
# "tools-debug" - add debugging tools (gdb, strace)
|
||||
# "eclipse-debug" - add Eclipse remote debugging support
|
||||
# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
|
||||
# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
|
||||
# "debug-tweaks" - make an image suitable for development
|
||||
# e.g. ssh root access has a blank password
|
||||
# There are other application targets that can be used here too, see
|
||||
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
|
||||
# We default to enabling the debugging tweaks.
|
||||
EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
|
||||
|
||||
#
|
||||
# Additional image features
|
||||
#
|
||||
# The following is a list of additional classes to use when building images which
|
||||
# enable extra features. Some available options which can be included in this variable
|
||||
# are:
|
||||
# - 'buildstats' collect build statistics
|
||||
USER_CLASSES ?= "buildstats"
|
||||
|
||||
#
|
||||
# Runtime testing of images
|
||||
#
|
||||
# The build system can test booting virtual machine images under qemu (an emulator)
|
||||
# after any root filesystems are created and run tests against those images. It can also
|
||||
# run tests against any SDK that are built. To enable this uncomment these lines.
|
||||
# See classes/test{image,sdk}.bbclass for further details.
|
||||
#IMAGE_CLASSES += "testimage testsdk"
|
||||
#TESTIMAGE_AUTO:qemuall = "1"
|
||||
|
||||
#
|
||||
# Interactive shell configuration
|
||||
#
|
||||
# Under certain circumstances the system may need input from you and to do this it
|
||||
# can launch an interactive shell. It needs to do this since the build is
|
||||
# multithreaded and needs to be able to handle the case where more than one parallel
|
||||
# process may require the user's attention. The default is iterate over the available
|
||||
# terminal types to find one that works.
|
||||
#
|
||||
# Examples of the occasions this may happen are when resolving patches which cannot
|
||||
# be applied, to use the devshell or the kernel menuconfig
|
||||
#
|
||||
# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
|
||||
# Note: currently, Konsole support only works for KDE 3.x due to the way
|
||||
# newer Konsole versions behave
|
||||
#OE_TERMINAL = "auto"
|
||||
# By default disable interactive patch resolution (tasks will just fail instead):
|
||||
PATCHRESOLVE = "noop"
|
||||
|
||||
#
|
||||
# Disk Space Monitoring during the build
|
||||
#
|
||||
# Monitor the disk space during the build. If there is less that 1GB of space or less
|
||||
# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
|
||||
# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt
|
||||
# of the build. The reason for this is that running completely out of space can corrupt
|
||||
# files and damages the build in ways which may not be easily recoverable.
|
||||
# It's necessary to monitor /tmp, if there is no space left the build will fail
|
||||
# with very exotic errors.
|
||||
BB_DISKMON_DIRS ??= "\
|
||||
STOPTASKS,${TMPDIR},1G,100K \
|
||||
STOPTASKS,${DL_DIR},1G,100K \
|
||||
STOPTASKS,${SSTATE_DIR},1G,100K \
|
||||
STOPTASKS,/tmp,100M,100K \
|
||||
HALT,${TMPDIR},100M,1K \
|
||||
HALT,${DL_DIR},100M,1K \
|
||||
HALT,${SSTATE_DIR},100M,1K \
|
||||
HALT,/tmp,10M,1K"
|
||||
|
||||
#
|
||||
# Shared-state files from other locations
|
||||
#
|
||||
# As mentioned above, shared state files are prebuilt cache data objects which can be
|
||||
# used to accelerate build time. This variable can be used to configure the system
|
||||
# to search other mirror locations for these objects before it builds the data itself.
|
||||
#
|
||||
# This can be a filesystem directory, or a remote url such as https or ftp. These
|
||||
# would contain the sstate-cache results from previous builds (possibly from other
|
||||
# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
|
||||
# cache locations to check for the shared objects.
|
||||
# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
|
||||
# at the end as shown in the examples below. This will be substituted with the
|
||||
# correct path within the directory structure.
|
||||
#SSTATE_MIRRORS ?= "\
|
||||
#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \
|
||||
#file://.* file:///some/local/dir/sstate/PATH"
|
||||
|
||||
#
|
||||
# Yocto Project SState Mirror
|
||||
#
|
||||
# The Yocto Project has prebuilt artefacts available for its releases, you can enable
|
||||
# use of these by uncommenting the following lines. This will mean the build uses
|
||||
# the network to check for artefacts at the start of builds, which does slow it down
|
||||
# equally, it will also speed up the builds by not having to build things if they are
|
||||
# present in the cache. It assumes you can download something faster than you can build it
|
||||
# which will depend on your network.
|
||||
# Note: For this to work you also need hash-equivalence passthrough to the matching server
|
||||
#
|
||||
#BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687"
|
||||
#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH"
|
||||
|
||||
#
|
||||
# Qemu configuration
|
||||
#
|
||||
# By default native qemu will build with a builtin VNC server where graphical output can be
|
||||
# seen. The line below enables the SDL UI frontend too.
|
||||
PACKAGECONFIG:append:pn-qemu-system-native = " sdl"
|
||||
# By default libsdl2-native will be built, if you want to use your host's libSDL instead of
|
||||
# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
|
||||
#ASSUME_PROVIDED += "libsdl2-native"
|
||||
|
||||
# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds
|
||||
# a handy set of menus for controlling the emulator.
|
||||
#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+"
|
||||
|
||||
#
|
||||
# Hash Equivalence
|
||||
#
|
||||
# Enable support for automatically running a local hash equivalence server and
|
||||
# instruct bitbake to use a hash equivalence aware signature generator. Hash
|
||||
# equivalence improves reuse of sstate by detecting when a given sstate
|
||||
# artifact can be reused as equivalent, even if the current task hash doesn't
|
||||
# match the one that generated the artifact.
|
||||
#
|
||||
# A shared hash equivalent server can be set with "<HOSTNAME>:<PORT>" format
|
||||
#
|
||||
#BB_HASHSERVE = "auto"
|
||||
#BB_SIGNATURE_HANDLER = "OEEquivHash"
|
||||
|
||||
#
|
||||
# Memory Resident Bitbake
|
||||
#
|
||||
# Bitbake's server component can stay in memory after the UI for the current command
|
||||
# has completed. This means subsequent commands can run faster since there is no need
|
||||
# for bitbake to reload cache files and so on. Number is in seconds, after which the
|
||||
# server will shut down.
|
||||
#
|
||||
#BB_SERVER_TIMEOUT = "60"
|
||||
|
||||
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
|
||||
# track the version of this file when it was generated. This can safely be ignored if
|
||||
# this doesn't mean anything to you.
|
||||
CONF_VERSION = "2"
|
||||
|
||||
#
|
||||
# Enable local PR server
|
||||
#
|
||||
PRSERV_HOST = "localhost:0"
|
||||
|
||||
#
|
||||
# Some packages are covered by STM EULA
|
||||
#
|
||||
#ACCEPT_EULA_ccmp25-dvk = "1"
|
||||
|
|
@ -3,7 +3,7 @@
|
|||
#
|
||||
# mkproject.sh
|
||||
#
|
||||
# Copyright (C) 2013-2022 by Digi International Inc.
|
||||
# Copyright (C) 2013-2024 by Digi International Inc.
|
||||
# All rights reserved.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -94,7 +94,9 @@ do_license() {
|
|||
${MKP_SCRIPTPATH}/sources/meta-digi/meta-digi-arm/DIGI_EULA \
|
||||
${MKP_SCRIPTPATH}/sources/meta-digi/meta-digi-arm/DIGI_OPEN_EULA \
|
||||
"
|
||||
if [ "${MKP_PLATFORM}" = "ccmp15-dvk" ] || [ "${MKP_PLATFORM}" = "ccmp13-dvk" ]; then
|
||||
if [ "${MKP_PLATFORM}" = "ccmp15-dvk" ] || \
|
||||
[ "${MKP_PLATFORM}" = "ccmp13-dvk" ] || \
|
||||
[ "${MKP_PLATFORM}" = "ccmp25-dvk" ]; then
|
||||
local SOC_VENDOR="STM"
|
||||
MKP_LICENSE_FILES=" \
|
||||
${MKP_LICENSE_FILES} \
|
||||
|
|
|
|||
Loading…
Reference in New Issue