diff --git a/sdk/config/ccimx6qpsbc/local.conf.sample b/sdk/config/ccimx6qpsbc/local.conf.sample index 94d54275b..87a48cece 100644 --- a/sdk/config/ccimx6qpsbc/local.conf.sample +++ b/sdk/config/ccimx6qpsbc/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,10 +202,10 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations @@ -217,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,7 +222,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -240,21 +237,21 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -283,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server diff --git a/sdk/config/ccimx6sbc/local.conf.sample b/sdk/config/ccimx6sbc/local.conf.sample index 2d05fed82..dc13f9351 100644 --- a/sdk/config/ccimx6sbc/local.conf.sample +++ b/sdk/config/ccimx6sbc/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,10 +202,10 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations @@ -217,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,7 +222,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -240,21 +237,21 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -283,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server diff --git a/sdk/config/ccimx6ulsbc/local.conf.sample b/sdk/config/ccimx6ulsbc/local.conf.sample index d65cea8f7..1a946a60e 100644 --- a/sdk/config/ccimx6ulsbc/local.conf.sample +++ b/sdk/config/ccimx6ulsbc/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,10 +202,10 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations @@ -217,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,7 +222,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -240,21 +237,21 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -283,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server diff --git a/sdk/config/ccimx6ulstarter/local.conf.sample b/sdk/config/ccimx6ulstarter/local.conf.sample index c53a21357..9f27e8ab0 100644 --- a/sdk/config/ccimx6ulstarter/local.conf.sample +++ b/sdk/config/ccimx6ulstarter/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,10 +202,10 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations @@ -217,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,7 +222,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -240,21 +237,21 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -283,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server diff --git a/sdk/config/ccimx8mm-dvk/local.conf.sample b/sdk/config/ccimx8mm-dvk/local.conf.sample index 17d9c70dd..32aa2b044 100644 --- a/sdk/config/ccimx8mm-dvk/local.conf.sample +++ b/sdk/config/ccimx8mm-dvk/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,10 +202,10 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations @@ -217,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,7 +222,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -240,21 +237,21 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -283,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server diff --git a/sdk/config/ccimx8mn-dvk/local.conf.sample b/sdk/config/ccimx8mn-dvk/local.conf.sample index 95a14286b..986c42433 100644 --- a/sdk/config/ccimx8mn-dvk/local.conf.sample +++ b/sdk/config/ccimx8mn-dvk/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,10 +202,10 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations @@ -217,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,7 +222,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -240,21 +237,21 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -283,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server diff --git a/sdk/config/ccimx8mp-dvk/local.conf.sample b/sdk/config/ccimx8mp-dvk/local.conf.sample index 19947542f..157cb272c 100644 --- a/sdk/config/ccimx8mp-dvk/local.conf.sample +++ b/sdk/config/ccimx8mp-dvk/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,10 +202,10 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations @@ -217,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,7 +222,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -240,21 +237,21 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -283,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server diff --git a/sdk/config/ccimx8x-sbc-express/local.conf.sample b/sdk/config/ccimx8x-sbc-express/local.conf.sample index d2904ff17..8ec6237e1 100644 --- a/sdk/config/ccimx8x-sbc-express/local.conf.sample +++ b/sdk/config/ccimx8x-sbc-express/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,10 +202,10 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations @@ -217,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,7 +222,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -240,21 +237,21 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -283,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server diff --git a/sdk/config/ccimx8x-sbc-pro/local.conf.sample b/sdk/config/ccimx8x-sbc-pro/local.conf.sample index 50cf25891..afc84141c 100644 --- a/sdk/config/ccimx8x-sbc-pro/local.conf.sample +++ b/sdk/config/ccimx8x-sbc-pro/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,10 +202,10 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations @@ -217,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,7 +222,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -240,21 +237,21 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -283,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server diff --git a/sdk/config/ccmp15-dvk/local.conf.sample b/sdk/config/ccmp15-dvk/local.conf.sample index a02c0ea65..2c7c8a10c 100644 --- a/sdk/config/ccmp15-dvk/local.conf.sample +++ b/sdk/config/ccmp15-dvk/local.conf.sample @@ -2,9 +2,10 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. +# be set in this file. More adventurous users can look at +# local.conf.sample.extended which contains other examples of configuration which +# can be placed in this file but new users likely won't need any of them +# initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -119,7 +120,7 @@ PACKAGE_CLASSES ?= "package_rpm" # This variable specifies the architecture to build SDK items for and means # you can build the SDK packages for architectures other than the machine you are # running the build on (i.e. building i686 packages on an x86_64 host). -# Supported values are i686 and x86_64 +# Supported values are i686, x86_64, aarch64 #SDKMACHINE ?= "i686" # @@ -155,11 +156,7 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images @@ -169,7 +166,7 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" -#TESTIMAGE_AUTO_qemuall = "1" +#TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration @@ -195,7 +192,7 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail @@ -205,19 +202,19 @@ BB_DISKMON_DIRS ??= "\ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K \ - ABORT,/tmp,10M,1K" + HALT,${TMPDIR},100M,1K \ + HALT,${DL_DIR},100M,1K \ + HALT,${SSTATE_DIR},100M,1K \ + HALT,/tmp,10M,1K" # # Shared-state files from other locations # -# As mentioned above, shared state files are prebuilt cache data objects which can +# As mentioned above, shared state files are prebuilt cache data objects which can be # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -225,34 +222,36 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \ #file://.* file:///some/local/dir/sstate/PATH" # # Yocto Project SState Mirror # # The Yocto Project has prebuilt artefacts available for its releases, you can enable -# use of these by uncommenting the following line. This will mean the build uses +# use of these by uncommenting the following lines. This will mean the build uses # the network to check for artefacts at the start of builds, which does slow it down # equally, it will also speed up the builds by not having to build things if they are # present in the cache. It assumes you can download something faster than you can build it # which will depend on your network. +# Note: For this to work you also need hash-equivalence passthrough to the matching server # -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" +#BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/4.0/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. -PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. -#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Hash Equivalence @@ -281,7 +280,7 @@ PACKAGECONFIG_append_pn-qemu-system-native = " sdl" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" # # Enable local PR server