From a5a09bdefff811c7faa8046905ba58f4fb2e68aa Mon Sep 17 00:00:00 2001
From: Alex Gonzalez <alex.gonzalez@digi.com>
Date: Thu, 18 May 2017 12:30:34 +0200
Subject: [PATCH] firmware-qualcomm: Remove cfg.dat and qcom_cfg.ini

These are now provided from the kernel-module-qualcomm recipe.

Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
 .../firmware-qualcomm/wlan/cfg.dat            | Bin 10298 -> 0 bytes
 .../firmware-qualcomm/wlan/qcom_cfg.ini       | 373 ------------------
 2 files changed, 373 deletions(-)
 delete mode 100644 meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm/wlan/cfg.dat
 delete mode 100644 meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm/wlan/qcom_cfg.ini

diff --git a/meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm/wlan/cfg.dat b/meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm/wlan/cfg.dat
deleted file mode 100644
index 3860af48e898f0fd95ef031fc57e4b5eb619c8b4..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 10298
zcmeI0349dQ9moHZon%8c>`N5!Hfst50hw@=AS#R(-~p~Do`@Qe)&PrwqN0u%m9`OA
z5mAu}D&DuYwXKzCTg7_TYQ67UD<UFQ>Zkbq&*p{6nr&^QR{P=UH~;tk@BjYq&70Xb
z!_O&?B^)VohV&FE5)l`u%9|UC6l2S~i1dMv?#=z@IU=j@H^ul<F~XIKUf6^<P+CzV
zMJbbtr4r(%J?Z6lm+fFAjDg~`@k<~+&bXz}3CbXmHBt_pAqgg9qyj2ogTVM3V!LFF
zyAgDSjbRhm6vn4w(vXSCW?4@*&wBoesTyg_)W~euBIC(LL5;s<HX&POjZ{HOOloT}
zZgpVXA3!(i-Ju86h>@Owk!_$?;E4o%r8l+@Y>Tfib9mHip&#^TZ3D0pl!gqX{X^nb
z2QgU#JD(YoV_+8C2!j~^*qL!j&x}i5*0_UVI~W4nv$h>z$7an}Bu^4El=`q{BR=fZ
zY}}o(yTGno=WgU0p7q=j*paY1{d>Tkuop3-u%lVq-hq)cNRX6$@b61~zrduPnOP$r
zLhP&>*%Un34Gx7Va4sx>JK-UC1wMsDV~uPL`?J<M>;bItK;{_(2f@M3o_`4Q9LoHM
z!Qn8r+4x7$H>$D5AD7)*jto5isEl!s&Uk+PLeD=2`}ov4fBeE>{;`?f{)Egh|3~<L
zys*kY4ql`06KEiAVy*Ef!DPt56gVDEfT=JIPK1+SI-Crrz^O0;PJ`3o3<%&%m<eY=
zBb*KAz_~CBegZ#*pFtDzp9ixu#y=mMg$v-qj3;x_#=i*W!o@HTE`dwovb2%;a5*f1
zpTiZf5Ef-T_e!`5u7<^M4LPsP7{B=JxPM(>-0R^6F>)guR~(m{uni?~nHZ1Dq|&(D
zOnY*txZHxxl*Q#%VP6t)|2A^m4tKzva2Nanj&F+lzr_9u?uK8(Z{W9Z5B!ej@m}uF
zl9X|q;Xb$@eh+_uKW2<P5Eyw7mcm2uC*mK5N8nL-3?7Fk;Lq?R`~{wZr}>@yl^oB&
zv+x|_pBE!9z>D<11TTwmUx8Qgy#}wt8~ER3eQ&|r@D99N;mLdOK7Ah$^Ed2=unayT
z_wouOA7fV#`w4a>d<q<6Qaeqg9;<ad>ul-WNu-2^;#Y}q{Do)Y4%kU>cS7V{&Ohae
z_}aSWQMBlo7b8h+pSo;a<Fu|mJ$Iue8l(RFwvC;|IqlQXGh5L(J(~3_*Sgxx!4~!D
zx^2;UIksiZnw-ZjS>v=`mUFlM%^$BF>Wdb=cHJvmbPYO>?xz-=%8t>sXuZKYA{)V}
zRj}A_4T#nY4X~H2vC2PLgi=n2VvG9zRq^T6a66~9dd+sf?4H>^wNdmw+5HZv>n7WK
zr_HdG=I*P_Vck({`zl(T3<>9PSEO6l7me3?0J^@d^04c}-CAt^R!2)kuU~WM_3Az1
zClD6(=@@<<VX@DWHgtcK_DW>?!)}{<DXr)l)ZeGY5%ss1)B2)ou)ffK-2`n0wOvnM
z*MF_4*KLa~+hTpzM&r~M{hiwwwf1a?`qtOm-+>N3ChaHt9(e8V#admmecsyJ3)|P;
zrRB%l=hIp{Mt}eHwo$<9v8-pNr8Did=Ws>%PSF^BU)z{}XYJb6>ezAb=W^=#rDGRk
zwNA?LH`Ax3u5FFCw8?`r+Rm@1mhkJtsrmK2tNnT%_BW|Efao~=-UyZr3VnLk>UWEd
z*BHG|Hdgmlv2D9Q8f)v?M>C93tMi3>Plp|^eoHi7bJ$#J!x*(%?3l2f%dfe$*!8q$
zUHYSIvoU&|QGYlexm(}Y8c0#U=EyJFtvLdS=25?{Ro_Kw^_tb%dE2vgZfkXr-!jII
zwSDc4w{y0}w#*ss8_u;>>ucLOF3{M}*VgLZ+PU<-Z{PjlJ<>6dZi&%-(6+T&*PJQr
z7cJ;>q&}O|&S~3GtK;>(uRh&B`)=27VfFF(9PW94tiFTJz(&W{N80*Lxa+Rf)gl81
zlyN8BSdmj2FVW?YMz2b<=`3gpvbA(gxJ9K>E!{TRpuAz+$Xb!^^!1>xM&iXWr%tw!
z+CDwI`8y0ASe+<wiu(5I5ifRQ<z<~pC)6i9PoJ7;nAI4}xOCp!rbSmQm_KyLp#G~?
zu2?Q#to|$}!$m$VW7ZMUaOAXoCQh7ubcu|V{{2Re5*aukF1yRXeTR>cegkStWDnVP
zQonxe@=hhPr^f83F)<;uOVWwSXzc0TM8-&^OlH5r-A5RRRjrBTzHBQcgP%KDzb3~2
z)?Z&KQ;5dD)W|(mVsc|;X{8*`zG{42#^a2KyDY??P$2)*0{N#E$bVvi{3jL2KOMh5
zal?3cVpYRvX{nTx$<G}h%lcVo%lgMw$|*$S_gFuRZ&|-rDW^vBo3;Bhqb2_u-M5JU
zwA}i?lK=GF`t$M|ent8`WEv*a2Q#Kmm8MyZ8EF!y$Z;Iki8&=su~X{AoieABQ|=_3
zq|@2y=2Sa9ogPjfr<YUf^p$~5e;F);_=n99@nxt?;MmMagG`sHq@N+Pq|uoxP0ppx
zJZFJ3-&y2b;VgF+J1d<P&S%al=L=_bh0M|I(VtIisgTQB>$XxM^KG@&*2%LSey&Ac
zBF`)ED!c}7z+3PR|0Y`|oy!yaz)bSymvjHA#`h0;FVR~YYJ9!X_e`p&0^N?6RxD*w
zE)=J~s_}*TUfTGj<0ASV^)~umHlpwGZ}AP$1G->0$|R*LYz&*grmz`|PvtZ|^gY=k
z+g9V-GLr~3zOB&ss>quH^u1Iy+CixA1#R>_w<k~3Hi7DUM%HS3p7ceZ^6=F%M^4-G
zM76z~rsv5Z)>sFFgQRRnTp^8b2;;5Bw|&;QXnO9BFcgNdHXn9s_R#lgWaZ4b>`Xn>
z^qP(A)@<D2*b#uH=kHFgJ+hv=Cw4CwMgM5n8`8v}=ehf`M)W+{9}a*6@sGhC6qwZK
z%wf>%y2JLc4;%}p!5p|AmcY~S0XXP+8^gA+3mnW^55^wC8V@DkVQ@I}jcxY)Bba9#
z^B)OE!O_jeucvP^8s9N!eB%QTEzh_U(6T};5Bo71-f?Jr4QPB5(fB4U^!&-_dl`sL
ztMfO4Da3tidS0#Z&x6@;K4hUq&-3SG(DPW!T(}tKWjwhgokY(|qUR<3`EWTb0Q5XR
zr{^VQQ93DC!c}lJEQV{?hil<FxE^jm<GYcZH!(*I8sE)<ac_ZJB`LRwk@Je<ayxc5
z8sGVx@>w*#J7`~k#&;+7LNva+#Q1a2_*BnpPs_UqjjvVDBL+RsUjof=AKafs&tom2
zo|iK21Mna$g@*t=PaY18JOYoxW6)O5OG>MrM;`P%7d_8K&vT!H=lQL?Ko0agLC=$y
z8IPXF351?U|LgFEpy$C`_}+$h;9dOhu|D)X{{ukJ^FOTcWEp&vNxI94LC<s1^IY^i
zH`MbgjI3ggzZ3fz_H$SbS~$wqiO#3r;EEQ_sc6w}pLMD8X-=D4>(OGhKK=gJ@2Z}3
zDz@-tpkD{!8@WBr&#vDk=9_AMI%obmbuS9(es<677_0kDLcG#7^8wdda(Aw^*`{L0
zt20_}6BKFaD@==>e_iN)HkanrYu1ld{X$i=6k3<wEB&t466hZWsIN_YsqlG`=c64h
zHePi<y}sE_lcV3!>vg~AF6Hh^TTe^NZeY8eg`FK7Ryg5**khkB9j0rs<fn<oY2SJs
zFn@<S*8X4L|BkJ?<D>Lk(_*dG?K9WjUf4d3%P;xy_8GO-#_M@jZyN=y=F(%-Y7}a}
zsUE0P+4bA}--aHjbET0Tbn@n>99ejd6JA%oHfZ1LLEbvol{T1)<kh{kd!X}%_XCIC
zD<$0f7Hi|w>b=u@VQm=4pHSbj<HB|>fB4?VuVV|Lp9PvPzhBjqsNX&d>-E9hJ<z?i
zd&Vcl_gWvUtn9cx=%NpHO*GE@Zfk@G@+^-*0<Et6Khp{$nq5RIL?~RZ6@DG9P*1h+
PXN=+BY~LZRux#{~yI3S6

diff --git a/meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm/wlan/qcom_cfg.ini b/meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm/wlan/qcom_cfg.ini
deleted file mode 100644
index fd1a774a1..000000000
--- a/meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm/wlan/qcom_cfg.ini
+++ /dev/null
@@ -1,373 +0,0 @@
-# This file allows user to override the factory
-
-# defaults for the WLAN Driver
-
-# Debug tracing bit values
-# VOS tracing requires a debug build - see BUILD_DEBUG_VERSION
-
-# None = 0
-# Error
-# Warn
-# Info
-# Info high
-# Info med
-# Info low
-# Debug = 7
-
-# Debug masks in decimal
-# Default debug is Error and Warn 0x06 (6)
-# All debug is 0xff (255)
-
-#vosTraceEnableTL=6
-#vosTraceEnableWDI=6
-#vosTraceEnableHDD=6
-#vosTraceEnableSME=6
-#vosTraceEnablePE=6
-#vosTraceEnablePMC=6
-#vosTraceEnableWDA=6
-#vosTraceEnableSYS=6
-#vosTraceEnableVOSS=6
-#vosTraceEnableSAP=6
-#vosTraceEnableHDDSAP=6
-
-# Enable/Disable Idle Scan
-
-gEnableRxThread=1
-
-
-# Increase sleep duration (seconds) during IMPS
-# 0 implies no periodic wake up from IMPS. Periodic wakeup is
-# unnecessary if Idle Scan is disabled.
-gImpsModSleepTime=0
-
-
-# Enable suspend or not
-
-# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
-
-gEnableSuspend=3
-
-
-# Phy Mode (auto, b, g, n, etc)
-# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
-# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
-# 7 = 11b only 8 = 11ac only.
-gDot11Mode=0
-
-# CSR Roaming Enable(1) Disable(0)
-
-gRoamingTime=0
-
-# Assigned MAC Addresses - This will be used until NV items are in place
-
-# Each byte of MAC address is represented in Hex format as XX
-
-Intf0MacAddress=000AF58989FF
-Intf1MacAddress=000AF58989FE
-Intf2MacAddress=000AF58989FD
-
-Intf3MacAddress=000AF58989FC
-
-
-# UAPSD service interval for VO,VI, BE, BK traffic
-
-InfraUapsdVoSrvIntv=0
-
-InfraUapsdViSrvIntv=0
-
-InfraUapsdBeSrvIntv=0
-
-InfraUapsdBkSrvIntv=0
-
-# Flag to allow STA send AddTspec even when ACM is Off
-gAddTSWhenACMIsOff=1
-
-# Make 1x1 the default antenna configuration
-
-gNumRxAnt=1
-
-
-# Beacon filtering frequency (unit in beacon intervals)
-
-gNthBeaconFilter=50
-
-
-# Flags to filter Mcast abd Bcast RX packets.
-
-# Value 0: No filtering, 1: Filter all Multicast.
-
-# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
-
-McastBcastFilter=3
-
-
-#Flag to enable HostARPOffload feature or not
-
-hostArpOffload=1
-
-#Flag to enable HostNSOffload feature or not
-
-hostNSOffload=1
-
-#Enable OBSS protection
-
-gEnableApOBSSProt=1
-
-
-# RTS threshold
-
-RTSThreshold=1048576
-
-
-# DFS Master Capability
-gEnableDFSMasterCap=1
-
-# fast transition
-ImplicitQosIsEnabled=0
-
-gNeighborLookupThreshold=76
-
-#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
-#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
-#the RSSI of the new/roamable AP should be for roaming
-RoamRssiDiff=3
-
-# SAP auto channel selection configuration
-
-# 0 = disable auto channel selection
-
-# 1 = enable auto channel selection, channel provided by supplicant will be ignored
-
-gApAutoChannelSelection=0
-
-
-# Listen Energy Detect Mode Configuration
-
-# Valid values 0-128
-
-# 128 means disable Energy Detect feature
-
-# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
-
-# 10-128 are reserved.
-
-# The EDET threshold mapping is as follows in 3dB step:
-
-# 0 = -60 dBm
-
-# 1 = -63 dBm
-
-# 2 = -66 dBm
-
-# ...
-
-# 7 = -81 dBm
-
-# 8 = -84 dBm
-
-# 9 = -87 dBm
-
-# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
-
-#
-
-#  Range Loss  (dB)  =  EDET threshold level (dBm) + 97 dBm.
-
-#
-
-gEnablePhyAgcListenMode=128
-
-
-#SOFTAP Channel Range selection
-
-gAPChannelSelectStartChannel=1
-
-gAPChannelSelectEndChannel=11
-
-
-#SOFTAP Channel Range selection Operating band
-
-# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
-
-gAPChannelSelectOperatingBand=0
-
-
-#Channel Bonding
-gChannelBondingMode5GHz=1
-
-
-#Enable Keep alive with non-zero period value
-
-gStaKeepAlivePeriod = 30
-
-#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
-#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
-#For both active and power save clients.
-
-#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
-#If doesn't honor for 5 seconds then DUT remove client.
-
-#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try on
-#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames.
-#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
-
-#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
-#where we send NULL frame.
-
-#gApLinkMonitorPeriod = 10
-
-#gGoLinkMonitorPeriod = 10
-
-#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
-#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
-
-
-gGoKeepAlivePeriod = 20
-
-gApKeepAlivePeriod = 20
-
-
-gEnableLogp=1
-
-
-# 0 for OLPC 1 for CLPC and SCPC
-gEnableCloseLoop=1
-
-#Data Inactivity Timeout when in powersave (in ms)
-gDataInactivityTimeout=200
-
-# VHT Tx/Rx MCS values
-# Valid values are 0,1,2. If commented out, the default value is 0.
-# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
-gVhtRxMCS=2
-gVhtTxMCS=0
-
-# VHT Tx/Rx MCS values for 2x2
-# Valid values are 0,1,2. If commented out, the default value is 0.
-# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
-gEnable2x2=0
-gVhtRxMCS2x2=2
-gVhtTxMCS2x2=2
-
-# Set txchainmask and rxchainmask
-# These parameters are used only if gEnable2x2 is 0
-# Valid values are 1,2
-# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
-# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
-gSetTxChainmask1x1=1
-gSetRxChainmask1x1=1
-
-# 1=enable STBC; 0=disable STBC
-gEnableRXSTBC=1
-
-# 1=enable tx STBC; 0=disable
-gEnableTXSTBC=1
-
-# 1=enable rx LDPC; 0=disable
-gEnableRXLDPC=1
-
-#Enable Scan Results Aging based on timer
-#Timer value is in seconds
-#If Set to 0 it will not enable the feature
-gScanAgingTime=0
-
-#Enable Scan Results Aging based on number of scans
-gScanResultAgeCount=1
-
-#Enable thermal mitigation
-gThermalMitigationEnable=0
-
-#Thermal Mitigation Levels
-gThermalTempMinLevel0=0
-gThermalTempMaxLevel0=107
-gThermalTempMinLevel1=105
-gThermalTempMaxLevel1=117
-gThermalTempMinLevel2=110
-gThermalTempMaxLevel2=127
-gThermalTempMinLevel3=115
-gThermalTempMaxLevel3=0
-
-#Maxium Channel time in msec
-gMaxMediumTime = 6000
-
-# 802.11K support
-gRrmEnable=1
-gRrmOperChanMax=8
-gRrmNonOperChanMax=8
-
-#Scan offload
-gEnableDirectedScanOffload=1
-
-#Enable Power Save offload
-gEnablePowerSaveOffload=1
-
-#Enable firmware log
-gEnablefwlog=1
-
-#P2P Listen offload
-gEnableP2pListenOffload=1
-
-# Maximum Receive AMPDU size (VHT only. Valid values: 0->8k 1->16k 2->32k 3->64k 4->128k)
-gVhtAmpduLenExponent=7
-
-# Maximum MPDU length (VHT only. Valid values: 0->3895 octets, 1->7991 octets, 2->11454 octets)
-gVhtMpduLen=2
-
-# Maximum number of wow filters required
-#gMaxWoWFilters=22
-
-# WOW Enable/Disable.
-# 0 - Disable both magic pattern match and pattern byte match.
-# 1 - Enable magic pattern match on all interfaces.
-# 2 - Enable pattern byte match on all interfaces.
-# 3 - Enable both magic patter and pattern byte match on all interfaces.
-# Default value of gEnableWoW is 3.
-# gEnableWoW=0
-
-#Enable or Disable p2p device address administered
-isP2pDeviceAddrAdministrated=0
-
-# Set Thermal Power limit
-TxPower2g=10
-TxPower5g=10
-
-#Enable VHT on 2.4Ghz
-gEnableVhtFor24GHzBand=1
-
-#Enable or Disable 5G early beacon termination
-gEnable5gEBT=1
-
-ssdp = 0
-
-#Enable Hysteretic mode
-gEnableHystereticMode=1
-
-# Bus bandwidth compute timeout value in ms
-gBusBandwidthComputeInterval=2000
-
-# Regulatory Setting; 0=STRICT; 1=CUSTOM
-gRegulatoryChangeCountry=1
-
-# Enable/Disable RX full reorder offload
-gReorderOffloadSupported=1
-
-#Set SAP max peer to 16 which allows 10 WEP connection
-gSoftApMaxPeers=16
-
-# Whether userspace country code setting shld have priority
-gCountryCodePriority=1
-
-# Enable(1)/Disable(0) SIFS burst
-gEnableSifsBurst=1
-
-# Enable or Disable Multi-user MIMO
-# 1=Enable (default), 0=Disable
-gEnableMuBformee=1
-
-# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
-gIbssTxSpEndInactivityTime=10
-
-END
-
-# Note: Configuration parser would not read anything past the END marker
-