u-boot-dey: improvements to microSD and USB install scripts
- Check the existence of files before the 10 second wait. - Print the list of filenames to program to each partition. - Print the file that's being updated to each partition. Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit is contained in:
Hector Palacios
parent
9f3ab7c9d9
commit
a61873f7f1
|
|
@ -3,21 +3,9 @@
|
|||
# card into the eMMC
|
||||
#
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
# Determine U-Boot file to program basing on module variant
|
||||
if test -n "${module_variant}"; then
|
||||
|
|
@ -60,7 +48,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -74,11 +62,34 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -92,7 +103,7 @@ setenv mmcdev 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot mmc ${INSTALL_MMCDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -129,7 +140,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux mmc ${INSTALL_MMCDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||
|
|
@ -141,7 +152,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery mmc ${INSTALL_MMCDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||
|
|
@ -153,7 +164,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs mmc ${INSTALL_MMCDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||
|
|
|
|||
|
|
@ -3,21 +3,9 @@
|
|||
# into the eMMC
|
||||
#
|
||||
|
||||
echo "#######################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "#######################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
# Determine U-Boot file to program basing on module variant
|
||||
if test -n "${module_variant}"; then
|
||||
|
|
@ -60,7 +48,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -74,11 +62,34 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -92,7 +103,7 @@ setenv mmcdev 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot usb ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -130,7 +141,7 @@ setenv bootcmd "
|
|||
usb start;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux usb ${INSTALL_USBDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||
|
|
@ -142,7 +153,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery usb ${INSTALL_USBDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||
|
|
@ -154,7 +165,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs usb ${INSTALL_USBDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||
|
|
|
|||
|
|
@ -3,21 +3,9 @@
|
|||
# card into the eMMC
|
||||
#
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
# Determine U-Boot file to program basing on module variant
|
||||
if test -n "${module_variant}"; then
|
||||
|
|
@ -71,7 +59,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -85,11 +73,34 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -103,7 +114,7 @@ setenv mmcdev 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot mmc ${INSTALL_MMCDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -140,7 +151,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux mmc ${INSTALL_MMCDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||
|
|
@ -152,7 +163,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery mmc ${INSTALL_MMCDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||
|
|
@ -164,7 +175,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs mmc ${INSTALL_MMCDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||
|
|
|
|||
|
|
@ -3,21 +3,9 @@
|
|||
# into the eMMC
|
||||
#
|
||||
|
||||
echo "#######################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "#######################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
# Determine U-Boot file to program basing on module variant
|
||||
if test -n "${module_variant}"; then
|
||||
|
|
@ -71,7 +59,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -90,6 +78,29 @@ if test -n "${install_abort}"; then
|
|||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -103,7 +114,7 @@ setenv mmcdev 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot usb ${INSTALL_USBDEV} fat ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -141,7 +152,7 @@ setenv bootcmd "
|
|||
usb start;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux usb ${INSTALL_USBDEV} fat ${INSTALL_LINUX_FILENAME};
|
||||
|
|
@ -153,7 +164,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery usb ${INSTALL_USBDEV} fat ${INSTALL_RECOVERY_FILENAME};
|
||||
|
|
@ -165,7 +176,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs usb ${INSTALL_USBDEV} fat ${INSTALL_ROOTFS_FILENAME};
|
||||
|
|
|
|||
|
|
@ -3,21 +3,9 @@
|
|||
# card into the NAND
|
||||
#
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the NAND."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
# Determine U-Boot file to program basing on module variant
|
||||
if test -n "${module_variant}"; then
|
||||
|
|
@ -64,7 +52,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.ubifs
|
||||
|
|
@ -78,11 +66,34 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install the following files"
|
||||
echo " on the partitions of the NAND."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -93,7 +104,7 @@ setenv bootdelay 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot mmc ${INSTALL_MMCDEV} ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -122,7 +133,7 @@ setenv bootcmd "
|
|||
saveenv;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
nand erase.part linux;
|
||||
|
|
@ -135,7 +146,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
nand erase.part recovery;
|
||||
|
|
@ -148,7 +159,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
nand erase.part rootfs;
|
||||
|
|
|
|||
|
|
@ -3,21 +3,9 @@
|
|||
# into the NAND
|
||||
#
|
||||
|
||||
echo "#######################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "#######################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the NAND."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
# Determine U-Boot file to program basing on module variant
|
||||
if test -n "${module_variant}"; then
|
||||
|
|
@ -64,7 +52,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME}" = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.ubifs
|
||||
|
|
@ -78,11 +66,34 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install the following files"
|
||||
echo " on the partitions of the NAND."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -93,7 +104,7 @@ setenv bootdelay 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot usb ${INSTALL_USBDEV} ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -123,7 +134,7 @@ setenv bootcmd "
|
|||
usb start;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
nand erase.part linux;
|
||||
|
|
@ -136,7 +147,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
nand erase.part recovery;
|
||||
|
|
@ -149,7 +160,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
nand erase.part rootfs;
|
||||
|
|
|
|||
|
|
@ -3,21 +3,9 @@
|
|||
# card into the eMMC
|
||||
#
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
setenv INSTALL_UBOOT_FILENAME imx-boot-##MACHINE##.bin;
|
||||
setenv INSTALL_MMCDEV 1
|
||||
|
|
@ -31,7 +19,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -45,11 +33,34 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -63,7 +74,7 @@ setenv mmcdev 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot mmc ${INSTALL_MMCDEV} ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -107,7 +118,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
||||
|
|
@ -119,7 +130,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery mmc ${INSTALL_MMCDEV} ${INSTALL_RECOVERY_FILENAME};
|
||||
|
|
@ -131,7 +142,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
|
|
|
|||
|
|
@ -3,21 +3,9 @@
|
|||
# into the eMMC
|
||||
#
|
||||
|
||||
echo "######################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "######################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
setenv INSTALL_UBOOT_FILENAME imx-boot-##MACHINE##.bin;
|
||||
setenv INSTALL_USBDEV 0
|
||||
|
|
@ -31,7 +19,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -45,11 +33,34 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -63,7 +74,7 @@ setenv mmcdev 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot usb ${INSTALL_USBDEV} ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -108,7 +119,7 @@ setenv bootcmd "
|
|||
usb start;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME};
|
||||
|
|
@ -120,7 +131,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery usb ${INSTALL_USBDEV} ${INSTALL_RECOVERY_FILENAME};
|
||||
|
|
@ -132,7 +143,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
|
|
|
|||
|
|
@ -3,21 +3,9 @@
|
|||
# card into the eMMC
|
||||
#
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
# Since SOMs with the B0 SOC might have an older U-Boot that doesn't export the
|
||||
# SOC revision to the environment, use B0 by default
|
||||
|
|
@ -102,7 +90,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -116,11 +104,34 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -134,7 +145,7 @@ setenv mmcdev 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot mmc ${INSTALL_MMCDEV} ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -178,7 +189,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
||||
|
|
@ -190,7 +201,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery mmc ${INSTALL_MMCDEV} ${INSTALL_RECOVERY_FILENAME};
|
||||
|
|
@ -202,7 +213,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs mmc ${INSTALL_MMCDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
|
|
|
|||
|
|
@ -3,21 +3,9 @@
|
|||
# into the eMMC
|
||||
#
|
||||
|
||||
echo "######################################################"
|
||||
echo "# Linux firmware install from USB #"
|
||||
echo "######################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
# Reset temp variables
|
||||
install_abort=0
|
||||
BASEFILENAME=0
|
||||
|
||||
# Since SOMs with the B0 SOC might have an older U-Boot that doesn't export the
|
||||
# SOC revision to the environment, use B0 by default
|
||||
|
|
@ -102,7 +90,7 @@ for g in ${GRAPHICAL_IMAGES}; do
|
|||
BASEFILENAME="${image-name}-##GRAPHICAL_BACKEND##"
|
||||
fi
|
||||
done
|
||||
if test -z "${BASEFILENAME}"; then
|
||||
if test "${BASEFILENAME} = "0"; then
|
||||
BASEFILENAME="${image-name}"
|
||||
fi
|
||||
setenv INSTALL_LINUX_FILENAME ${BASEFILENAME}-##MACHINE##.boot.vfat
|
||||
|
|
@ -116,11 +104,34 @@ for install_f in ${INSTALL_UBOOT_FILENAME} ${INSTALL_LINUX_FILENAME} ${INSTALL_R
|
|||
install_abort=1;
|
||||
fi;
|
||||
done
|
||||
if test -n "${install_abort}"; then
|
||||
if test "${install_abort}" = "1"; then
|
||||
echo "Aborted.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install from micro SD #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort or wait 10 seconds"
|
||||
echo " to continue."
|
||||
|
||||
sleep 10
|
||||
if test $? -eq 1; then
|
||||
echo "Aborted by user.";
|
||||
exit;
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
setenv forced_update 1
|
||||
|
||||
|
|
@ -134,7 +145,7 @@ setenv mmcdev 0
|
|||
# Update U-Boot
|
||||
echo ""
|
||||
echo ""
|
||||
echo ">> Installing U-Boot boot loader (target will reset)"
|
||||
echo ">> Installing U-Boot boot loader image ${INSTALL_UBOOT_FILENAME} (target will reset)"
|
||||
echo ""
|
||||
echo ""
|
||||
update uboot usb ${INSTALL_USBDEV} ${INSTALL_UBOOT_FILENAME}
|
||||
|
|
@ -179,10 +190,10 @@ setenv bootcmd "
|
|||
usb start;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux kernel and device tree files\";
|
||||
echo \">> Installing linux image file ${INSTALL_LINUX_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update linux usb ${INSTALL_USBDEV} ${INSTALL_LINUX_FILENAME};
|
||||
update linux mmc ${INSTALL_MMCDEV} ${INSTALL_LINUX_FILENAME};
|
||||
if test \$? -eq 1; then
|
||||
echo \"[ERROR] Failed to update linux partition!\";
|
||||
echo \"\";
|
||||
|
|
@ -191,7 +202,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing recovery\";
|
||||
echo \">> Installing recovery file ${INSTALL_RECOVERY_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update recovery usb ${INSTALL_USBDEV} ${INSTALL_RECOVERY_FILENAME};
|
||||
|
|
@ -203,7 +214,7 @@ setenv bootcmd "
|
|||
fi;
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
echo \">> Installing Linux root file system\";
|
||||
echo \">> Installing root file system file ${INSTALL_ROOTFS_FILENAME}\";
|
||||
echo \"\";
|
||||
echo \"\";
|
||||
update rootfs usb ${INSTALL_USBDEV} ${INSTALL_ROOTFS_FILENAME};
|
||||
|
|
|
|||
Loading…
Reference in New Issue