diff --git a/meta-digi-arm/conf/machine/ccimx8mm-dvk.conf b/meta-digi-arm/conf/machine/ccimx8mm-dvk.conf new file mode 100644 index 000000000..ff88e92d7 --- /dev/null +++ b/meta-digi-arm/conf/machine/ccimx8mm-dvk.conf @@ -0,0 +1,46 @@ +#@TYPE: Machine +#@NAME: ConnectCore 8M Mini Development Kit. +#@DESCRIPTION: Machine configuration for Digi's ConnectCore 8M Mini DVK. + +# Include the machine configuration for Digi's ConnectCore 8M module. +include conf/machine/include/ccimx8m.inc + +DIGI_FAMILY = "ccimx8mm" +MACHINEOVERRIDES =. "mx8:mx8m:mx8mm:ccimx8m:${DIGI_FAMILY}:" + +BOOTLOADER_SEEK = "33" + +# U-Boot configurations +# Last one is the default (the one the symlinks point at) +UBOOT_CONFIG ??= "ccimx8mm_dvk" +UBOOT_CONFIG[ccimx8mm_dvk] = "ccimx8mm_dvk_defconfig,,u-boot-dtb.${UBOOT_SUFFIX}" +SPL_BINARY = "spl/u-boot-spl.bin" + +# Set u-boot DTB +UBOOT_DTB_NAME = "ccimx8mm-dvk.dtb" + +KERNEL_DEVICETREE ?= " \ + digi/ccimx8mm-dvk.dtb \ + digi/_ov_board_lvds_ccimx8m-dvk.dtbo \ + digi/_ov_board_user-leds_ccimx8m-dvk.dtbo \ + digi/_ov_som_bt_ccimx8m.dtbo \ + digi/_ov_som_mca-keypad_ccimx8m.dtbo \ + digi/_ov_som_quad_ccimx8m.dtbo \ + digi/_ov_som_wifi_ccimx8m.dtbo \ +" + +SERIAL_CONSOLES ?= "115200;ttymxc0" + +# Bluetooth tty +BT_TTY ?= "ttymxc1" + +# XBees +XBEE_RESET_N_GPIO ?= "mca-gpio@15,gpio1@8" +XBEE_SLEEP_RQ_GPIO ?= "mca-gpio@11,gpio1@7" +XBEE_TTY ?= "ttymxc3" + +# U-Boot script to be copied to the boot image +BOOT_SCRIPTS = "boot.scr:boot.scr" + +# Flash image types +IMAGE_FSTYPES ?= "boot.vfat ext4 sdcard tar.bz2 recovery.vfat" diff --git a/meta-digi-arm/conf/machine/ccimx8mn-dvk.conf b/meta-digi-arm/conf/machine/ccimx8mn-dvk.conf index 28ddaff9f..310671277 100644 --- a/meta-digi-arm/conf/machine/ccimx8mn-dvk.conf +++ b/meta-digi-arm/conf/machine/ccimx8mn-dvk.conf @@ -2,8 +2,13 @@ #@NAME: ConnectCore 8M Nano Development Kit. #@DESCRIPTION: Machine configuration for Digi's ConnectCore 8M Nano DVK. -# Include the machine configuration for Digi's ConnectCore 8M Nano module. -include conf/machine/include/ccimx8mn.inc +# Include the machine configuration for Digi's ConnectCore 8M module. +include conf/machine/include/ccimx8m.inc + +DIGI_FAMILY = "ccimx8mn" +MACHINEOVERRIDES =. "mx8:mx8m:mx8mn:ccimx8m:${DIGI_FAMILY}:" + +BOOTLOADER_SEEK = "32" # U-Boot configurations # Last one is the default (the one the symlinks point at) @@ -16,14 +21,14 @@ UBOOT_DTB_NAME = "ccimx8mn-dvk.dtb" KERNEL_DEVICETREE ?= " \ digi/ccimx8mn-dvk.dtb \ - digi/_ov_board_lvds_ccimx8mn-dvk.dtbo \ - digi/_ov_board_user-leds_ccimx8mn-dvk.dtbo \ + digi/_ov_board_lvds_ccimx8m-dvk.dtbo \ + digi/_ov_board_user-leds_ccimx8m-dvk.dtbo \ digi/_ov_board_v1-v2_ccimx8mn-dvk.dtbo \ - digi/_ov_som_bt_ccimx8mn.dtbo \ - digi/_ov_som_mca-keypad_ccimx8mn.dtbo \ - digi/_ov_som_quad_ccimx8mn.dtbo \ + digi/_ov_som_bt_ccimx8m.dtbo \ + digi/_ov_som_mca-keypad_ccimx8m.dtbo \ + digi/_ov_som_quad_ccimx8m.dtbo \ digi/_ov_som_v1_ccimx8mn.dtbo \ - digi/_ov_som_wifi_ccimx8mn.dtbo \ + digi/_ov_som_wifi_ccimx8m.dtbo \ " SERIAL_CONSOLES ?= "115200;ttymxc0" diff --git a/meta-digi-arm/conf/machine/include/ccimx8mn.inc b/meta-digi-arm/conf/machine/include/ccimx8m.inc similarity index 89% rename from meta-digi-arm/conf/machine/include/ccimx8mn.inc rename to meta-digi-arm/conf/machine/include/ccimx8m.inc index 8a59abfb2..2d8fc8fdb 100644 --- a/meta-digi-arm/conf/machine/include/ccimx8mn.inc +++ b/meta-digi-arm/conf/machine/include/ccimx8m.inc @@ -1,9 +1,6 @@ #@TYPE: Machine -#@NAME: ConnectCore 8M Nano module. -#@DESCRIPTION: Machine configuration for Digi's ConnectCore 8M Nano module. - -DIGI_FAMILY = "ccimx8mn" -MACHINEOVERRIDES =. "mx8:mx8m:mx8mn:ccimx8m:${DIGI_FAMILY}:" +#@NAME: ConnectCore 8M family of SOMs. +#@DESCRIPTION: Machine configuration for Digi's ConnectCore 8M family of SOMs. include conf/machine/include/imx-digi-base.inc include conf/machine/include/arm/arch-arm64.inc @@ -16,7 +13,6 @@ UBOOT_HAS_FASTBOOT = "true" # The bootloader image that gets flashed consists of U-Boot and several fw binaries EXTRA_IMAGEDEPENDS = "imx-boot" BOOTLOADER_IMAGE_RECIPE = "imx-boot" -BOOTLOADER_SEEK = "32" BOOTABLE_FILENAME = "${UBOOT_PREFIX}-${MACHINE}.bin" SDIMG_BOOTLOADER = "${DEPLOY_DIR_IMAGE}/${BOOTABLE_FILENAME}" diff --git a/meta-digi-arm/conf/machine/include/digi-defaults.inc b/meta-digi-arm/conf/machine/include/digi-defaults.inc index dad951872..401586d45 100644 --- a/meta-digi-arm/conf/machine/include/digi-defaults.inc +++ b/meta-digi-arm/conf/machine/include/digi-defaults.inc @@ -19,6 +19,7 @@ LINUXLIBCVERSION ?= "5.4%" # ccimx6ul 5.4 2020.04 # ccimx8x 5.4 2020.04 (packaged in imx-boot) # ccimx8mn 5.4 2020.04 (packaged in imx-boot) +# ccimx8mm 5.4 2020.04 (packaged in imx-boot) # # Help variables used in recipes diff --git a/meta-digi-arm/conf/machine/include/imx-digi-base.inc b/meta-digi-arm/conf/machine/include/imx-digi-base.inc index 54bce7bf4..2a1c018e1 100644 --- a/meta-digi-arm/conf/machine/include/imx-digi-base.inc +++ b/meta-digi-arm/conf/machine/include/imx-digi-base.inc @@ -29,6 +29,7 @@ MACHINEOVERRIDES_EXTENDER_mx6dl = "imxfbdev:imxipu:imxpxp:imxvpu:imxvpucnm:imxg MACHINEOVERRIDES_EXTENDER_mx6ul = "imxfbdev:imxpxp" MACHINEOVERRIDES_EXTENDER_mx8qxp = "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d" MACHINEOVERRIDES_EXTENDER_mx8mn = "imxdrm:imxgpu:imxgpu3d" +MACHINEOVERRIDES_EXTENDER_mx8mm = "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d" # Sub-architecture support MACHINE_SOCARCH_SUFFIX ?= "" @@ -39,6 +40,7 @@ MACHINE_SOCARCH_SUFFIX_mx8qxp = "-mx8qxp" MACHINE_SOCARCH_SUFFIX_mx8dxp = "-mx8dxp" MACHINE_SOCARCH_SUFFIX_mx8dx = "-mx8dx" MACHINE_SOCARCH_SUFFIX_mx8mn = "-mx8mn" +MACHINE_SOCARCH_SUFFIX_mx8mm = "-mx8mm" MACHINE_ARCH_FILTER = "virtual/kernel" MACHINE_SOCARCH_FILTER_append_imxvpu = " \ diff --git a/sdk/build-github.sh b/sdk/build-github.sh index 83d8bbc19..d5885aa09 100755 --- a/sdk/build-github.sh +++ b/sdk/build-github.sh @@ -3,7 +3,7 @@ # # build-github.sh # -# Copyright (C) 2015-2019 by Digi International Inc. +# Copyright (C) 2015-2021 by Digi International Inc. # All rights reserved. # # This program is free software; you can redistribute it and/or modify it @@ -22,7 +22,16 @@ set -e -AVAILABLE_PLATFORMS="ccimx8mn-dvk ccimx8x-sbc-pro ccimx8x-sbc-express ccimx6qpsbc ccimx6sbc ccimx6ulsbc ccimx6ulstarter" +AVAILABLE_PLATFORMS=" \ + ccimx8mm-dvk \ + ccimx8mn-dvk \ + ccimx8x-sbc-pro \ + ccimx8x-sbc-express \ + ccimx6qpsbc \ + ccimx6sbc \ + ccimx6ulsbc \ + ccimx6ulstarter \ +" MANIFEST_URL="https://github.com/digi-embedded/dey-manifest.git" @@ -122,6 +131,7 @@ while read _pl _tgt; do # the fly with underscores. eval "${_pl//-/_}_tgt=\"${_tgt//,/ }\"" done<<-_EOF_ + ccimx8mm-dvk dey-image-qt ccimx8mn-dvk dey-image-qt ccimx8x-sbc-pro dey-image-qt ccimx8x-sbc-express dey-image-qt diff --git a/sdk/build.sh b/sdk/build.sh index 8b7ff28b2..7047f61f7 100755 --- a/sdk/build.sh +++ b/sdk/build.sh @@ -3,7 +3,7 @@ # # build.sh # -# Copyright (C) 2013-2019 by Digi International Inc. +# Copyright (C) 2013-2021 by Digi International Inc. # All rights reserved. # # This program is free software; you can redistribute it and/or modify it @@ -174,6 +174,7 @@ while read _pl _var _tgt; do eval "${_pl//-/_}_var=\"${_var//,/ }\"" eval "${_pl//-/_}_tgt=\"${_tgt//,/ }\"" done<<-_EOF_ + ccimx8mm-dvk DONTBUILDVARIANTS dey-image-qt,dey-image-aws ccimx8mn-dvk DONTBUILDVARIANTS dey-image-qt,dey-image-aws ccimx8x-sbc-pro DONTBUILDVARIANTS dey-image-qt,dey-image-aws ccimx8x-sbc-express DONTBUILDVARIANTS dey-image-qt,dey-image-aws diff --git a/sdk/config/ccimx8mm-dvk/bblayers.conf.sample b/sdk/config/ccimx8mm-dvk/bblayers.conf.sample new file mode 100644 index 000000000..68d2495bf --- /dev/null +++ b/sdk/config/ccimx8mm-dvk/bblayers.conf.sample @@ -0,0 +1,24 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-poky \ + ##OEROOT##/meta-yocto-bsp \ + ##DIGIBASE##/meta-openembedded/meta-oe \ + ##DIGIBASE##/meta-openembedded/meta-python \ + ##DIGIBASE##/meta-openembedded/meta-networking \ + ##DIGIBASE##/meta-openembedded/meta-webserver \ + ##DIGIBASE##/meta-qt5 \ + ##DIGIBASE##/meta-swupdate \ + ##DIGIBASE##/meta-freescale \ + ##DIGIBASE##/meta-fsl-demos \ + ##DIGIBASE##/meta-python2 \ + ##DIGIBASE##/meta-webkit \ + ##DIGIBASE##/meta-digi/meta-digi-arm \ + ##DIGIBASE##/meta-digi/meta-digi-dey \ + " diff --git a/sdk/config/ccimx8mm-dvk/conf-notes.txt b/sdk/config/ccimx8mm-dvk/conf-notes.txt new file mode 100644 index 000000000..39ed1c407 --- /dev/null +++ b/sdk/config/ccimx8mm-dvk/conf-notes.txt @@ -0,0 +1,23 @@ +Digi Embedded Yocto provides the following image recipes: + + * dey-image-qt: graphical QT image + + By default the image is XWayland-based so it provides a full Weston + desktop environment. + + To compile the image for the framebuffer (instead of XWayland) add + the following line to the project's conf/local.conf: + + DISTRO_FEATURES_remove = "x11 wayland vulkan" + + * dey-image-webkit: graphical WebKit image + + By default the image is XWayland-based so it provides a full Weston + desktop environment. + + * dey-image-aws: console-only image supporting Amazon Web Services IoT + + This image includes the AWS Greengrass Core and an AWS IoT platform + example application. For more information on AWS support in Digi + Embedded Yocto see the online documentation. + diff --git a/sdk/config/ccimx8mm-dvk/local.conf.sample b/sdk/config/ccimx8mm-dvk/local.conf.sample new file mode 100644 index 000000000..de295e30e --- /dev/null +++ b/sdk/config/ccimx8mm-dvk/local.conf.sample @@ -0,0 +1,285 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone-yocto" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86-64 if no other machine is selected: +#MACHINE ??= "qemux86-64" + +MACHINE = "ccimx8mm-dvk" + +# +# Use Digi's internal git repositories +# +#DIGI_INTERNAL_GIT ?= "1" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "dey" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_rpm" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +USER_CLASSES ?= "buildstats image-mklibs image-prelink" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS ??= "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" + +# +# Qemu configuration +# +# By default native qemu will build with a builtin VNC server where graphical output can be +# seen. The line below enables the SDL UI frontend too. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +# By default libsdl2-native will be built, if you want to use your host's libSDL instead of +# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +#ASSUME_PROVIDED += "libsdl2-native" + +# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds +# a handy set of menus for controlling the emulator. +#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" + +# +# Hash Equivalence +# +# Enable support for automatically running a local hash equivalence server and +# instruct bitbake to use a hash equivalence aware signature generator. Hash +# equivalence improves reuse of sstate by detecting when a given sstate +# artifact can be reused as equivalent, even if the current task hash doesn't +# match the one that generated the artifact. +# +# A shared hash equivalent server can be set with ":" format +# +#BB_HASHSERVE = "auto" +#BB_SIGNATURE_HANDLER = "OEEquivHash" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# +# Enable local PR server +# +PRSERV_HOST = "localhost:0" + +# +# Some libraries and packages are covered by NXP EULA +# +#ACCEPT_FSL_EULA = "1"