recovery: add new bootscript for the recovery image

Signed-off-by: David Escalona <david.escalona@digi.com>

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey-2015.04/ccimx6/recovery.txt

@@ -0,0 +1,49 @@
+#
+# U-Boot bootscript for EMMC/SD images created by Yocto.
+#
+
+#
+# Set device tree filename depending on the board ID (if defined)
+#
+if test -n "${board_id}"; then
+	setenv fdt_file uImage-${soc_family}-ccimx6sbc-id${board_id}.dtb
+else
+	#
+	# Set device tree filename depending on the hardware variant
+	#
+	if test "${module_variant}" = "0x02"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x03"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x04"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x05"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc-w.dtb
+	elif test "${module_variant}" = "0x06"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x08"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x0a"; then
+		setenv fdt_file uImage-imx6dl-ccimx6sbc-w.dtb
+	elif test "${module_variant}" = "0x0b"; then
+		setenv fdt_file uImage-imx6dl-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x0c"; then
+		setenv fdt_file uImage-imx6dl-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x0e"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x0f"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc.dtb
+	elif test "${module_variant}" = "0x11"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x12"; then
+		setenv fdt_file uImage-imx6q-ccimx6sbc-wb.dtb
+	elif test "${module_variant}" = "0x13"; then
+		setenv fdt_file uImage-imx6dl-ccimx6sbc-wb.dtb
+	else
+		echo "------ Using default fdt_file"
+	fi
+fi
+
+setenv boot_initrd true
+setenv initrd_file uramdisk-recovery.img
+dboot linux mmc ${mmcbootdev}:${mmcpart}

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey-2015.04/ccimx6ulsbc/recovery.txt

@@ -0,0 +1,25 @@
+#
+# U-Boot bootscript for NAND images created by Yocto.
+#
+
+#
+# Set device tree filename depending on the board ID (if defined)
+#
+if test -n "${board_id}"; then
+	setenv fdt_file zImage-imx6ul-ccimx6ulsbc-id${board_id}.dtb
+else
+	#
+	# Set device tree filename depending on the hardware variant
+	#
+	if test "${module_variant}" = "0x02"; then
+		setenv fdt_file zImage-imx6ul-ccimx6ulsbc-wb.dtb
+	elif test "${module_variant}" = "0x03"; then
+		setenv fdt_file zImage-imx6ul-ccimx6ulsbc.dtb
+	else
+		echo "------ Using default fdt_file: $fdt_file"
+	fi
+fi
+
+setenv boot_initrd true
+setenv initrd_file uramdisk-recovery.img
+dboot linux nand ${mtdbootpart}

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey-2015.04/ccimx6ulstarter/recovery.txt

@@ -0,0 +1,25 @@
+#
+# U-Boot bootscript for NAND images created by Yocto.
+#
+
+#
+# Set device tree filename depending on the board ID (if defined)
+#
+if test -n "${board_id}"; then
+	setenv fdt_file zImage-imx6ul-ccimx6ulstarter-id${board_id}.dtb
+else
+	#
+	# Set device tree filename depending on the hardware variant
+	#
+	if test "${module_variant}" = "0x02"; then
+		setenv fdt_file zImage-imx6ul-ccimx6ulstarter-wb.dtb
+	elif test "${module_variant}" = "0x03"; then
+		setenv fdt_file zImage-imx6ul-ccimx6ulstarter.dtb
+	else
+		echo "------ Using default fdt_file: $fdt_file"
+	fi
+fi
+
+setenv boot_initrd true
+setenv initrd_file uramdisk-recovery.img
+dboot linux nand ${mtdbootpart}

meta-digi-arm/recipes-bsp/u-boot/u-boot-dey_2015.04.bb

@@ -24,6 +24,7 @@ SRC_URI = " \
 SRC_URI_append = " \
     file://boot.txt \
     file://install_linux_fw_sd.txt \
+    file://recovery.txt \
 "
 
 LOCALVERSION ?= ""
@@ -150,12 +151,24 @@ do_deploy_append() {
 	TMP_BOOTSCR="$(mktemp ${WORKDIR}/bootscr.XXXXXX)"
 	sed -e "${TF_BOOTSCRIPT_SEDFILTER}" ${WORKDIR}/boot.txt > ${TMP_BOOTSCR}
 	mkimage -T script -n bootscript -C none -d ${TMP_BOOTSCR} ${DEPLOYDIR}/boot.scr
+
+	# Recovery boot script for DEY images
+	mkimage -T script -n bootscript -C none -d ${WORKDIR}/recovery.txt ${DEPLOYDIR}/recovery.scr
+
+	# Sign the scripts
 	if [ "${TRUSTFENCE_SIGN}" = "1" ]; then
 		export CONFIG_SIGN_KEYS_PATH="${TRUSTFENCE_SIGN_KEYS_PATH}"
 		[ -n "${TRUSTFENCE_KEY_INDEX}" ] && export CONFIG_KEY_INDEX="${TRUSTFENCE_KEY_INDEX}"
 		[ -n "${TRUSTFENCE_DEK_PATH}" ] && [ "${TRUSTFENCE_DEK_PATH}" != "0" ] && export CONFIG_DEK_PATH="${TRUSTFENCE_DEK_PATH}"
-		"${STAGING_BINDIR_NATIVE}/trustfence-sign-kernel.sh" -p "${DIGI_FAMILY}" -b "${DEPLOYDIR}/boot.scr" "${DEPLOYDIR}/boot-signed.scr"
+
-		mv ${DEPLOYDIR}/boot-signed.scr ${DEPLOYDIR}/boot.scr
+		# Sign boot script
+		TMP_SIGNED_BOOTSCR="$(mktemp ${WORKDIR}/bootscr-signed.XXXXXX)"
+		trustfence-sign-kernel.sh -p "${DIGI_FAMILY}" -b "${DEPLOYDIR}/boot.scr" "${TMP_SIGNED_BOOTSCR}"
+		mv "${TMP_SIGNED_BOOTSCR}" "${DEPLOYDIR}/boot.scr"
+
+		# Sign recovery script
+		trustfence-sign-kernel.sh -p "${DIGI_FAMILY}" -b "${DEPLOYDIR}/recovery.scr" "${TMP_SIGNED_BOOTSCR}"
+		mv "${TMP_SIGNED_BOOTSCR}" "${DEPLOYDIR}/recovery.scr"
 	fi
 	rm -f ${TMP_BOOTSCR}
 }