u-boot-dey: improve workflow and messages of uuu install script
- Determine first the filenames and abort if any does not exist. - Print a warning message about the erasing of the media with a list of partitions and files to use for the update - Sync the different scripts so they look more similar Signed-off-by: Hector Palacios <hector.palacios@digi.com> https://jira.digi.com/browse/DEL-7333
This commit is contained in:
Hector Palacios
parent
8f4d707fb6
commit
aa535a505b
|
|
@ -15,9 +15,8 @@
|
|||
# set -x
|
||||
|
||||
#
|
||||
# U-Boot script for installing Linux images created by Yocto into the NAND
|
||||
# U-Boot script for installing Linux images created by Yocto
|
||||
#
|
||||
clear
|
||||
|
||||
# Parse uuu cmd output
|
||||
getenv()
|
||||
|
|
@ -60,6 +59,11 @@ part_update()
|
|||
uuu "fb[-t ${3}]:" ucmd update "${1}" ram \${fastboot_buffer} \${fastboot_bytes}
|
||||
}
|
||||
|
||||
clear
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
|
||||
# Command line admits the following parameters:
|
||||
# -u <u-boot-filename>
|
||||
# -i <image-name>
|
||||
|
|
@ -73,25 +77,8 @@ do
|
|||
esac
|
||||
done
|
||||
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the NAND."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
echo "Determining image files to use..."
|
||||
|
||||
# Enable the redirect support to get u-boot variables values
|
||||
uuu fb: ucmd setenv stdout serial,fastboot
|
||||
|
|
@ -113,7 +100,10 @@ if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
|
|||
fi
|
||||
fi
|
||||
|
||||
# u-boot when the checked value is empty.
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
# U-Boot when the checked value is empty.
|
||||
if [ -n "${INSTALL_UBOOT_FILENAME}" ]; then
|
||||
true
|
||||
else
|
||||
|
|
@ -136,9 +126,6 @@ if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
|
|||
fi
|
||||
fi
|
||||
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
# Determine linux, recovery, and rootfs image filenames to update
|
||||
if [ -z "${IMAGE_NAME}" ]; then
|
||||
IMAGE_NAME="dey-image-qt"
|
||||
|
|
@ -158,6 +145,34 @@ done;
|
|||
|
||||
[ "${ABORT}" = true ] && exit 1
|
||||
|
||||
# Print warning about storage media being deleted
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo ""
|
||||
echo " ===================="
|
||||
echo " = IMPORTANT! ="
|
||||
echo " ===================="
|
||||
echo " This process will erase your NAND and will install the following files"
|
||||
echo " on the partitions of the NAND."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
|
|
|
|||
|
|
@ -15,9 +15,8 @@
|
|||
# set -x
|
||||
|
||||
#
|
||||
# U-Boot script for installing Linux images created by Yocto into the NAND
|
||||
# U-Boot script for installing Linux images created by Yocto
|
||||
#
|
||||
clear
|
||||
|
||||
# Parse uuu cmd output
|
||||
getenv()
|
||||
|
|
@ -60,6 +59,11 @@ part_update()
|
|||
uuu "fb[-t ${3}]:" ucmd update "${1}" ram \${fastboot_buffer} \${fastboot_bytes}
|
||||
}
|
||||
|
||||
clear
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
|
||||
# Command line admits the following parameters:
|
||||
# -u <u-boot-filename>
|
||||
# -i <image-name>
|
||||
|
|
@ -73,25 +77,8 @@ do
|
|||
esac
|
||||
done
|
||||
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your NAND and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the NAND."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
echo "Determining image files to use..."
|
||||
|
||||
# Enable the redirect support to get u-boot variables values
|
||||
uuu fb: ucmd setenv stdout serial,fastboot
|
||||
|
|
@ -113,7 +100,10 @@ if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
|
|||
fi
|
||||
fi
|
||||
|
||||
# u-boot when the checked value is empty.
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
# U-Boot when the checked value is empty.
|
||||
if [ -n "${INSTALL_UBOOT_FILENAME}" ]; then
|
||||
true
|
||||
else
|
||||
|
|
@ -136,9 +126,6 @@ if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
|
|||
fi
|
||||
fi
|
||||
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
# Determine linux, recovery, and rootfs image filenames to update
|
||||
if [ -z "${IMAGE_NAME}" ]; then
|
||||
IMAGE_NAME="core-image-base"
|
||||
|
|
@ -158,6 +145,34 @@ done;
|
|||
|
||||
[ "${ABORT}" = true ] && exit 1
|
||||
|
||||
# Print warning about storage media being deleted
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo ""
|
||||
echo " ===================="
|
||||
echo " = IMPORTANT! ="
|
||||
echo " ===================="
|
||||
echo " This process will erase your NAND and will install the following files"
|
||||
echo " on the partitions of the NAND."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
|
|
|
|||
|
|
@ -15,9 +15,8 @@
|
|||
# set -x
|
||||
|
||||
#
|
||||
# U-Boot script for installing Linux images created by Yocto into the eMMC
|
||||
# U-Boot script for installing Linux images created by Yocto
|
||||
#
|
||||
clear
|
||||
|
||||
# Parse uuu cmd output
|
||||
getenv()
|
||||
|
|
@ -59,6 +58,11 @@ part_update()
|
|||
fi
|
||||
}
|
||||
|
||||
clear
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
|
||||
# Command line admits the following parameters:
|
||||
# -u <u-boot-filename>
|
||||
# -i <image-name>
|
||||
|
|
@ -72,26 +76,10 @@ do
|
|||
esac
|
||||
done
|
||||
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
echo "Determining image files to use..."
|
||||
|
||||
# Determine U-Boot file to program basing on SOM's SOC type (linked to bus width)
|
||||
if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
|
||||
INSTALL_UBOOT_FILENAME="imx-boot-ccimx8mm-dvk.bin"
|
||||
fi
|
||||
|
|
@ -115,6 +103,37 @@ done;
|
|||
|
||||
[ "${ABORT}" = true ] && exit 1
|
||||
|
||||
# Print warning about storage media being deleted
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo ""
|
||||
echo " ===================="
|
||||
echo " = IMPORTANT! ="
|
||||
echo " ===================="
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
uuu fb: ucmd setenv forced_update 1
|
||||
|
||||
|
|
@ -158,7 +177,7 @@ uuu fb: ucmd setenv bootcmd "
|
|||
uuu fb: ucmd saveenv
|
||||
uuu fb: acmd reset
|
||||
|
||||
# Wait that target returns from reset
|
||||
# Wait for the target to reset
|
||||
sleep 3
|
||||
|
||||
# Update Linux
|
||||
|
|
|
|||
|
|
@ -15,9 +15,8 @@
|
|||
# set -x
|
||||
|
||||
#
|
||||
# U-Boot script for installing Linux images created by Yocto into the eMMC
|
||||
# U-Boot script for installing Linux images created by Yocto
|
||||
#
|
||||
clear
|
||||
|
||||
# Parse uuu cmd output
|
||||
getenv()
|
||||
|
|
@ -59,6 +58,11 @@ part_update()
|
|||
fi
|
||||
}
|
||||
|
||||
clear
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
|
||||
# Command line admits the following parameters:
|
||||
# -u <u-boot-filename>
|
||||
# -i <image-name>
|
||||
|
|
@ -72,26 +76,10 @@ do
|
|||
esac
|
||||
done
|
||||
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
echo "Determining image files to use..."
|
||||
|
||||
# Determine U-Boot file to program basing on SOM's SOC type (linked to bus width)
|
||||
if [ -z "${INSTALL_UBOOT_FILENAME}" ]; then
|
||||
INSTALL_UBOOT_FILENAME="imx-boot-ccimx8mn-dvk.bin"
|
||||
fi
|
||||
|
|
@ -115,6 +103,37 @@ done;
|
|||
|
||||
[ "${ABORT}" = true ] && exit 1
|
||||
|
||||
# Print warning about storage media being deleted
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo ""
|
||||
echo " ===================="
|
||||
echo " = IMPORTANT! ="
|
||||
echo " ===================="
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
uuu fb: ucmd setenv forced_update 1
|
||||
|
||||
|
|
@ -158,7 +177,7 @@ uuu fb: ucmd setenv bootcmd "
|
|||
uuu fb: ucmd saveenv
|
||||
uuu fb: acmd reset
|
||||
|
||||
# Wait that target returns from reset
|
||||
# Wait for the target to reset
|
||||
sleep 3
|
||||
|
||||
# Update Linux
|
||||
|
|
|
|||
|
|
@ -15,9 +15,8 @@
|
|||
# set -x
|
||||
|
||||
#
|
||||
# U-Boot script for installing Linux images created by Yocto into the eMMC
|
||||
# U-Boot script for installing Linux images created by Yocto
|
||||
#
|
||||
clear
|
||||
|
||||
# Parse uuu cmd output
|
||||
getenv()
|
||||
|
|
@ -59,6 +58,11 @@ part_update()
|
|||
fi
|
||||
}
|
||||
|
||||
clear
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
|
||||
# Command line admits the following parameters:
|
||||
# -u <u-boot-filename>
|
||||
# -i <image-name>
|
||||
|
|
@ -72,26 +76,11 @@ do
|
|||
esac
|
||||
done
|
||||
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
echo "Determining image files to use..."
|
||||
|
||||
# Determine U-Boot file to program basing on SOM's SOC type (linked to bus width)
|
||||
if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
||||
# Enable the redirect support to get u-boot variables values
|
||||
uuu fb: ucmd setenv stdout serial,fastboot
|
||||
|
||||
|
|
@ -102,10 +91,7 @@ if [ -z "${soc_rev}" ]; then
|
|||
soc_rev="B0"
|
||||
fi
|
||||
|
||||
# Determine U-Boot file to program basing on SOM's SOC type (linked to bus width)
|
||||
if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
||||
bus_width="32bit"
|
||||
|
||||
soc_type=$(getenv "soc_type")
|
||||
if [ "$soc_type" = "imx8dx" ]; then
|
||||
bus_width="16bit"
|
||||
|
|
@ -132,6 +118,9 @@ if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
|||
INSTALL_UBOOT_FILENAME="imx-boot-ccimx8x-sbc-express-${soc_rev}-${module_ram}_${bus_width}.bin"
|
||||
fi
|
||||
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
# U-Boot when the checked value is empty.
|
||||
if [ -n "${INSTALL_UBOOT_FILENAME}" ]; then
|
||||
true
|
||||
|
|
@ -157,9 +146,6 @@ if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
|||
fi
|
||||
fi
|
||||
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
# Determine linux, recovery, and rootfs image filenames to update
|
||||
if [ -z "${IMAGE_NAME}" ]; then
|
||||
IMAGE_NAME="dey-image-qt"
|
||||
|
|
@ -179,8 +165,33 @@ done;
|
|||
|
||||
[ "${ABORT}" = true ] && exit 1
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
# Print warning about storage media being deleted
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo ""
|
||||
echo " ===================="
|
||||
echo " = IMPORTANT! ="
|
||||
echo " ===================="
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
uuu fb: ucmd setenv forced_update 1
|
||||
|
|
@ -225,9 +236,12 @@ uuu fb: ucmd setenv bootcmd "
|
|||
uuu fb: ucmd saveenv
|
||||
uuu fb: acmd reset
|
||||
|
||||
# Wait that target returns from reset
|
||||
# Wait for the target to reset
|
||||
sleep 3
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
# Update Linux
|
||||
part_update "linux" "${INSTALL_LINUX_FILENAME}"
|
||||
|
||||
|
|
|
|||
|
|
@ -15,9 +15,8 @@
|
|||
# set -x
|
||||
|
||||
#
|
||||
# U-Boot script for installing Linux images created by Yocto into the eMMC
|
||||
# U-Boot script for installing Linux images created by Yocto
|
||||
#
|
||||
clear
|
||||
|
||||
# Parse uuu cmd output
|
||||
getenv()
|
||||
|
|
@ -59,6 +58,11 @@ part_update()
|
|||
fi
|
||||
}
|
||||
|
||||
clear
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
|
||||
# Command line admits the following parameters:
|
||||
# -u <u-boot-filename>
|
||||
# -i <image-name>
|
||||
|
|
@ -72,26 +76,11 @@ do
|
|||
esac
|
||||
done
|
||||
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo "############################################################"
|
||||
echo "# Linux firmware install through USB OTG #"
|
||||
echo "############################################################"
|
||||
echo ""
|
||||
echo " This process will erase your eMMC and will install a new"
|
||||
echo " U-Boot and Linux firmware images on the eMMC."
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
echo "Determining image files to use..."
|
||||
|
||||
# Determine U-Boot file to program basing on SOM's SOC type (linked to bus width)
|
||||
if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
||||
# Enable the redirect support to get u-boot variables values
|
||||
uuu fb: ucmd setenv stdout serial,fastboot
|
||||
|
||||
|
|
@ -102,10 +91,7 @@ if [ -z "${soc_rev}" ]; then
|
|||
soc_rev="B0"
|
||||
fi
|
||||
|
||||
# Determine U-Boot file to program basing on SOM's SOC type (linked to bus width)
|
||||
if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
||||
bus_width="32bit"
|
||||
|
||||
soc_type=$(getenv "soc_type")
|
||||
if [ "$soc_type" = "imx8dx" ]; then
|
||||
bus_width="16bit"
|
||||
|
|
@ -132,6 +118,9 @@ if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
|||
INSTALL_UBOOT_FILENAME="imx-boot-ccimx8x-sbc-pro-${soc_rev}-${module_ram}_${bus_width}.bin"
|
||||
fi
|
||||
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
# U-Boot when the checked value is empty.
|
||||
if [ -n "${INSTALL_UBOOT_FILENAME}" ]; then
|
||||
true
|
||||
|
|
@ -157,9 +146,6 @@ if [ -z ${INSTALL_UBOOT_FILENAME} ]; then
|
|||
fi
|
||||
fi
|
||||
|
||||
# remove redirect
|
||||
uuu fb: ucmd setenv stdout serial
|
||||
|
||||
# Determine linux, recovery, and rootfs image filenames to update
|
||||
if [ -z "${IMAGE_NAME}" ]; then
|
||||
IMAGE_NAME="dey-image-qt"
|
||||
|
|
@ -179,8 +165,33 @@ done;
|
|||
|
||||
[ "${ABORT}" = true ] && exit 1
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
# Print warning about storage media being deleted
|
||||
if [ ! "${NOWAIT}" = true ]; then
|
||||
WAIT=10
|
||||
echo ""
|
||||
echo " ===================="
|
||||
echo " = IMPORTANT! ="
|
||||
echo " ===================="
|
||||
echo " This process will erase your eMMC and will install the following files"
|
||||
echo " on the partitions of the eMMC."
|
||||
echo ""
|
||||
echo " PARTITION FILENAME"
|
||||
echo " --------- --------"
|
||||
echo " bootloader ${INSTALL_UBOOT_FILENAME}"
|
||||
echo " linux ${INSTALL_LINUX_FILENAME}"
|
||||
echo " recovery ${INSTALL_RECOVERY_FILENAME}"
|
||||
echo " rootfs ${INSTALL_ROOTFS_FILENAME}"
|
||||
echo ""
|
||||
echo " Press CTRL+C now if you wish to abort."
|
||||
echo ""
|
||||
while [ ${WAIT} -gt 0 ]; do
|
||||
printf "\r Update process starts in %d " ${WAIT}
|
||||
sleep 1
|
||||
WAIT=$(( ${WAIT} - 1 ))
|
||||
done
|
||||
printf "\r \n"
|
||||
echo " Starting update process"
|
||||
fi
|
||||
|
||||
# Skip user confirmation for U-Boot update
|
||||
uuu fb: ucmd setenv forced_update 1
|
||||
|
|
@ -225,9 +236,12 @@ uuu fb: ucmd setenv bootcmd "
|
|||
uuu fb: ucmd saveenv
|
||||
uuu fb: acmd reset
|
||||
|
||||
# Wait that target returns from reset
|
||||
# Wait for the target to reset
|
||||
sleep 3
|
||||
|
||||
# Set fastboot buffer address to $loadaddr, just in case
|
||||
uuu fb: ucmd setenv fastboot_buffer \${loadaddr}
|
||||
|
||||
# Update Linux
|
||||
part_update "linux" "${INSTALL_LINUX_FILENAME}"
|
||||
|
||||
|
|
@ -235,7 +249,7 @@ part_update "linux" "${INSTALL_LINUX_FILENAME}"
|
|||
part_update "recovery" "${INSTALL_RECOVERY_FILENAME}"
|
||||
|
||||
# Update Rootfs
|
||||
uuu fb: flash -raw2sparse rootfs ${INSTALL_ROOTFS_FILENAME}
|
||||
part_update "rootfs" "${INSTALL_ROOTFS_FILENAME}"
|
||||
|
||||
# Configure u-boot to boot into recovery mode
|
||||
uuu fb: ucmd setenv boot_recovery yes
|
||||
|
|
|
|||
Loading…
Reference in New Issue