hostapd: sync defconfig to 2.10 version and enable options

Sync the defconfig to version 2.10.
Additionally, add support for new features, such as:
 * ACS (auto channel selection)
 * 802.11AX (Wi-Fi 6)
 * SAE (WPA3 Personal)
 * SUITEB192 (WPA3 Enterprise 192 bits)

https://onedigi.atlassian.net/browse/DEL-8346

Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>

meta-digi-dey/recipes-connectivity/hostapd/hostapd/defconfig

@@ -18,6 +18,9 @@ CONFIG_DRIVER_HOSTAP=y
 # Driver interface for drivers using the nl80211 kernel interface
 CONFIG_DRIVER_NL80211=y
 
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
 # driver_nl80211.c requires libnl. If you are compiling it yourself
 # you may need to point hostapd to your version of libnl.
 #
@@ -41,17 +44,11 @@ CONFIG_LIBNL32=y
 # Driver interface for no driver (e.g., RADIUS server only)
 #CONFIG_DRIVER_NONE=y
 
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
 # WPA2/IEEE 802.11i RSN pre-authentication
 CONFIG_RSN_PREAUTH=y
 
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+# Support Operating Channel Validation
-CONFIG_PEERKEY=y
+#CONFIG_OCV=y
-
-# IEEE 802.11w (management frame protection)
-CONFIG_IEEE80211W=y
 
 # Integrated EAP server
 CONFIG_EAP=y
@@ -105,11 +102,18 @@ CONFIG_EAP_PWD=y
 #CONFIG_EAP_GPSK_SHA256=y
 
 # EAP-FAST for the integrated EAP server
-# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
-# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
-# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
 #CONFIG_EAP_FAST=y
 
+# EAP-TEAP for the integrated EAP server
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
 # Wi-Fi Protected Setup (WPS)
 CONFIG_WPS=y
 # Enable UPnP support for external WPS Registrars
@@ -138,15 +142,12 @@ CONFIG_RADIUS_SERVER=y
 CONFIG_IPV6=y
 
 # IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
+CONFIG_IEEE80211R=y
 
 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
 # the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
 #CONFIG_DRIVER_RADIUS_ACL=y
 
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
 # Wireless Network Management (IEEE Std 802.11v-2011)
 # Note: This is experimental and not complete implementation.
 #CONFIG_WNM=y
@@ -154,6 +155,12 @@ CONFIG_IEEE80211N=y
 # IEEE 802.11ac (Very High Throughput) support
 CONFIG_IEEE80211AC=y
 
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+CONFIG_IEEE80211AX=y
+
 # Remove debugging code that is printing out debug messages to stdout.
 # This can be used to reduce the size of the hostapd considerably if debugging
 # code is not needed.
@@ -163,6 +170,9 @@ CONFIG_IEEE80211AC=y
 # Disabled by default.
 CONFIG_DEBUG_FILE=y
 
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+
 # Add support for sending all debug messages (regardless of debug verbosity)
 # to the Linux kernel tracing facility. This helps debug the entire stack by
 # making it easy to record everything happening from the driver up into the
@@ -240,10 +250,25 @@ CONFIG_DEBUG_FILE=y
 # requirements described above.
 #CONFIG_NO_RANDOM_POOL=y
 
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+#CONFIG_GETRANDOM=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
 # Select TLS implementation
 # openssl = OpenSSL (default)
 # gnutls = GnuTLS
 # internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
 # none = Empty template
 #CONFIG_TLS=openssl
 
@@ -256,6 +281,10 @@ CONFIG_DEBUG_FILE=y
 # can be enabled to enable use of stronger crypto algorithms.
 #CONFIG_TLSV12=y
 
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
 # If CONFIG_TLS=internal is used, additional library and include paths are
 # needed for LibTomMath. Alternatively, an integrated, minimal version of
 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
@@ -283,6 +312,12 @@ CONFIG_DEBUG_FILE=y
 # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
 #CONFIG_SQLITE=y
 
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
 # Testing options
 # This can be used to enable some testing options (see also the example
 # configuration file) that are really useful only for testing clients that
@@ -311,6 +346,74 @@ CONFIG_DEBUG_FILE=y
 # * ath10k
 #
 # For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
+# https://wireless.wiki.kernel.org/en/users/documentation/acs
 #
-#CONFIG_ACS=y
+CONFIG_ACS=y
+
+# Multiband Operation support
+# These extensions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
+
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+#CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Airtime policy support
+#CONFIG_AIRTIME_POLICY=y
+
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current hostapd
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore. For now, the default hostapd
+# build includes this to allow mixed mode WPA+WPA2 networks to be enabled, but
+# that functionality is subject to be removed in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+# This requires CONFIG_IEEE80211W=y to be enabled, too.
+#CONFIG_PASN=y
+
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
+CONFIG_DPP=y
+# DPP version 2 support
+CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
+
+# CUSTOM CONFIG
+CONFIG_SAE=y
+CONFIG_SAE_PK=y
+CONFIG_SUITEB=y
+CONFIG_SUITEB192=y