ccimx6ul: Add recipe support for firmware-qualcomm

https://jira.digi.com/browse/DEL-2581

Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>

meta-digi-arm/conf/machine/include/ccimx6ul.inc

@@ -26,6 +26,9 @@ MACHINE_EXTRA_RRECOMMENDS += "fsl-alsa-plugins"
 
 MACHINE_FEATURES += "wifi bluetooth"
 
+MACHINE_FIRMWARE_append = " ${@base_contains('MACHINE_FEATURES', 'bluetooth', 'firmware-qualcomm-qca6564-bt', '', d)}"
+MACHINE_FIRMWARE_append = " ${@base_contains('MACHINE_FEATURES', 'wifi', 'firmware-qualcomm-qca6564-wifi', '', d)}"
+
 KERNEL_IMAGETYPE = "zImage"
 # FLASH parameters
 MKUBIFS_ARGS ?= "-m 2048 -e 126976 -c 2047"

meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm.bb

@@ -0,0 +1,66 @@
+# Copyright (C) 2016 Digi International.
+
+SUMMARY = "Qualcomm firmware files for Digi's platforms."
+SECTION = "base"
+LICENSE = "Proprietary"
+LIC_FILES_CHKSUM = "file://${DIGI_EULA_FILE};md5=4c0991cfde5c8a92338cbfe0f4f9a5c6"
+
+FW_QCA6564-BT = " \
+    file://qca/nvm_tlv_3.0.bin \
+    file://qca/nvm_tlv_3.2.bin \
+    file://qca/rampatch_tlv_3.0.tlv \
+    file://qca/rampatch_tlv_3.2.tlv \
+"
+
+FW_QCA6564-WIFI = " \
+    file://bdwlan30.bin \
+    file://LICENCE.atheros_firmware \
+    file://otp30.bin \
+    file://qwlan30.bin \
+    file://utf30.bin \
+    file://utfbd30.bin \
+    file://wlan/cfg.dat \
+    file://wlan/qcom_cfg.ini \
+"
+
+SRC_URI = " \
+    ${FW_QCA6564-BT} \
+    ${FW_QCA6564-WIFI} \
+"
+
+S = "${WORKDIR}"
+
+do_install() {
+	# BT firmware
+	install -d ${D}${base_libdir}/firmware/qca
+	install -m 0644 \
+		qca/nvm_tlv_3.0.bin \
+		qca/nvm_tlv_3.2.bin \
+		qca/rampatch_tlv_3.0.tlv \
+		qca/rampatch_tlv_3.2.tlv \
+		${D}${base_libdir}/firmware/qca
+
+	# Wifi firmware
+	install -d ${D}${base_libdir}/firmware/wlan
+	install -m 0644 \
+		bdwlan30.bin \
+		LICENCE.atheros_firmware \
+		otp30.bin \
+		qwlan30.bin \
+		utf30.bin \
+		utfbd30.bin \
+		${D}${base_libdir}/firmware
+	install -m 0644 \
+		wlan/cfg.dat \
+		wlan/qcom_cfg.ini \
+		${D}${base_libdir}/firmware/wlan
+}
+
+# Do not create empty debug and development packages (PN-dbg PN-dev PN-staticdev)
+PACKAGES = "${PN}-qca6564-bt ${PN}-qca6564-wifi"
+
+FILES_${PN}-qca6564-bt = "/lib/firmware/qca"
+FILES_${PN}-qca6564-wifi = "/lib/firmware"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+COMPATIBLE_MACHINE = "(ccimx6ul)"

meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm/LICENCE.atheros_firmware

@@ -0,0 +1,38 @@
+Copyright (c) 2008-2010, Atheros Communications, Inc.
+All rights reserved.
+
+Redistribution.  Redistribution and use in binary form, without
+modification, are permitted provided that the following conditions are
+met:
+
+* Redistributions must reproduce the above copyright notice and the
+  following disclaimer in the documentation and/or other materials
+  provided with the distribution.
+
+* Neither the name of Atheros Communications, Inc. nor the names of
+  its suppliers may be used to endorse or promote products derived
+  from this software without specific prior written permission.
+
+* No reverse engineering, decompilation, or disassembly of this
+  software is permitted.
+
+Limited patent license.  Atheros Communications, Inc. grants a
+world-wide, royalty-free, non-exclusive license under patents it
+now or hereafter owns or controls to make, have made, use, import,
+offer to sell and sell ("Utilize") this software, but solely to
+the extent that any such patent is necessary to Utilize the software
+in conjunction with an Atheros Chipset. The patent license shall not
+apply to any other combinations which include this software. No
+hardware per se is licensed hereunder.
+
+DISCLAIMER.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

meta-digi-arm/recipes-bsp/firmware-qualcomm/firmware-qualcomm/wlan/qcom_cfg.ini

@@ -0,0 +1,357 @@
+# This file allows user to override the factory
+
+# defaults for the WLAN Driver
+
+
+# Enable/Disable Idle Scan
+
+gEnableRxThread=1
+
+gEnableIdleScan=0
+
+
+# Increase sleep duration (seconds) during IMPS
+# 0 implies no periodic wake up from IMPS. Periodic wakeup is 
+# unnecessary if Idle Scan is disabled.
+gImpsModSleepTime=0
+
+
+# Enable suspend or not
+
+# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
+
+gEnableSuspend=3
+
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
+# 7 = 11b only 8 = 11ac only.
+gDot11Mode=0
+
+
+# CSR Roaming Enable(1) Disable(0)
+
+gRoamingTime=0
+
+
+# Assigned MAC Addresses - This will be used until NV items are in place
+
+# Each byte of MAC address is represented in Hex format as XX
+
+Intf0MacAddress=000AF58989FF
+Intf1MacAddress=000AF58989FE
+Intf2MacAddress=000AF58989FD
+
+Intf3MacAddress=000AF58989FC
+
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+
+InfraUapsdVoSrvIntv=0
+
+InfraUapsdViSrvIntv=0
+
+InfraUapsdBeSrvIntv=0
+
+InfraUapsdBkSrvIntv=0
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+# Make 1x1 the default antenna configuration
+
+gNumRxAnt=1
+
+
+# Beacon filtering frequency (unit in beacon intervals)
+
+gNthBeaconFilter=50
+
+
+# Flags to filter Mcast abd Bcast RX packets.
+
+# Value 0: No filtering, 1: Filter all Multicast.
+
+# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
+
+McastBcastFilter=3
+
+
+#Flag to enable HostARPOffload feature or not
+
+hostArpOffload=1
+
+#Flag to enable HostNSOffload feature or not
+
+hostNSOffload=1
+
+#Enable OBSS protection
+
+gEnableApOBSSProt=1
+
+
+# RTS threshold
+
+RTSThreshold=1048576
+
+
+# DFS Master Capability
+gEnableDFSMasterCap=1
+
+# fast transition
+ImplicitQosIsEnabled=0
+
+gNeighborLookupThreshold=76
+gNeighborReassocThreshold=81
+
+#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
+#Checking is disabled if set to Zero.Otherwise it will use this value as to how better 
+#the RSSI of the new/roamable AP should be for roaming
+RoamRssiDiff=3
+
+# If the RSSI of any available candidate is better than currently associated
+# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without
+# registering for reassoc threshold).
+# NOTE: Value of 0 means that we would register for reassoc threshold.
+gImmediateRoamRssiDiff=10
+
+# SAP auto channel selection configuration
+
+# 0 = disable auto channel selection
+
+# 1 = enable auto channel selection, channel provided by supplicant will be ignored
+
+gApAutoChannelSelection=0
+
+
+# Listen Energy Detect Mode Configuration
+
+# Valid values 0-128
+
+# 128 means disable Energy Detect feature
+
+# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
+
+# 10-128 are reserved.
+
+# The EDET threshold mapping is as follows in 3dB step:
+
+# 0 = -60 dBm
+
+# 1 = -63 dBm
+
+# 2 = -66 dBm
+
+# ...
+
+# 7 = -81 dBm
+
+# 8 = -84 dBm
+
+# 9 = -87 dBm
+
+# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
+
+#
+
+#  Range Loss  (dB)  =  EDET threshold level (dBm) + 97 dBm.
+
+#
+
+gEnablePhyAgcListenMode=128
+
+
+#SOFTAP Channel Range selection 
+
+gAPChannelSelectStartChannel=1
+
+gAPChannelSelectEndChannel=11
+
+
+#SOFTAP Channel Range selection Operating band
+
+# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
+
+gAPChannelSelectOperatingBand=0
+
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+
+
+#Enable Keep alive with non-zero period value
+
+gStaKeepAlivePeriod = 30
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
+#For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
+#If doesn't honor for 5 seconds then DUT remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try on
+#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames.
+#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
+#where we send NULL frame.
+
+#gApLinkMonitorPeriod = 10
+
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
+#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
+
+
+gGoKeepAlivePeriod = 20
+
+gApKeepAlivePeriod = 20
+
+
+gEnableLogp=1
+
+
+# 0 for OLPC 1 for CLPC and SCPC
+gEnableCloseLoop=1
+
+#Data Inactivity Timeout when in powersave (in ms)
+gDataInactivityTimeout=200
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+# VHT Tx/Rx MCS values for 2x2
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gEnable2x2=0
+gVhtRxMCS2x2=2
+gVhtTxMCS2x2=2
+
+# Set txchainmask and rxchainmask
+# These parameters are used only if gEnable2x2 is 0
+# Valid values are 1,2
+# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
+# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
+gSetTxChainmask1x1=1
+gSetRxChainmask1x1=1
+
+# 1=enable STBC; 0=disable STBC 
+gEnableRXSTBC=1
+
+# 1=enable tx STBC; 0=disable
+gEnableTXSTBC=1
+
+# 1=enable rx LDPC; 0=disable
+gEnableRXLDPC=1
+
+#Enable Scan Results Aging based on timer 
+#Timer value is in seconds
+#If Set to 0 it will not enable the feature
+gScanAgingTime=0
+
+#Enable Scan Results Aging based on number of scans
+gScanResultAgeCount=1
+
+#Enable thermal mitigation
+gThermalMitigationEnable=0
+
+#Thermal Mitigation Levels
+gThermalTempMinLevel0=0
+gThermalTempMaxLevel0=107
+gThermalTempMinLevel1=105
+gThermalTempMaxLevel1=117
+gThermalTempMinLevel2=110
+gThermalTempMaxLevel2=127
+gThermalTempMinLevel3=115
+gThermalTempMaxLevel3=0
+
+#Maxium Channel time in msec
+gMaxMediumTime = 6000
+
+# 802.11K support
+gRrmEnable=1
+gRrmOperChanMax=8
+gRrmNonOperChanMax=8
+
+#Scan offload
+gEnableDirectedScanOffload=1
+
+#Enable Power Save offload
+gEnablePowerSaveOffload=1
+
+#Enable firmware log
+gEnablefwlog=1
+
+#P2P Listen offload
+gEnableP2pListenOffload=1
+
+# Maximum Receive AMPDU size (VHT only. Valid values: 0->8k 1->16k 2->32k 3->64k 4->128k)
+gVhtAmpduLenExponent=7
+
+# Maximum MPDU length (VHT only. Valid values: 0->3895 octets, 1->7991 octets, 2->11454 octets)
+gVhtMpduLen=2
+
+# Maximum number of wow filters required
+#gMaxWoWFilters=22
+
+# WOW Enable/Disable.
+# 0 - Disable both magic pattern match and pattern byte match.
+# 1 - Enable magic pattern match on all interfaces.
+# 2 - Enable pattern byte match on all interfaces.
+# 3 - Enable both magic patter and pattern byte match on all interfaces.
+# Default value of gEnableWoW is 3.
+# gEnableWoW=0
+
+#Enable or Disable p2p device address administered
+isP2pDeviceAddrAdministrated=0
+
+# Set Thermal Power limit
+TxPower2g=10
+TxPower5g=10
+
+#Enable VHT on 2.4Ghz
+gEnableVhtFor24GHzBand=1
+
+#Enable or Disable 5G early beacon termination
+gEnable5gEBT=1
+
+ssdp = 0
+
+#Enable Hysteretic mode
+gEnableHystereticMode=1
+
+# Bus bandwidth compute timeout value in ms
+gBusBandwidthComputeInterval=2000
+
+# Regulatory Setting; 0=STRICT; 1=CUSTOM
+gRegulatoryChangeCountry=1
+
+# Enable/Disable RX full reorder offload
+gReorderOffloadSupported=1
+
+#Set SAP max peer to 16 which allows 10 WEP connection
+gSoftApMaxPeers=16
+
+# Whether userspace country code setting shld have priority
+gCountryCodePriority=1
+
+# Enable(1)/Disable(0) SIFS burst
+gEnableSifsBurst=1
+
+# Enable or Disable Multi-user MIMO
+# 1=Enable (default), 0=Disable
+gEnableMuBformee=1
+
+# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
+gIbssTxSpEndInactivityTime=10
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
+