diff --git a/README.md b/README.md index 88a55bdc1..e1490cfe5 100644 --- a/README.md +++ b/README.md @@ -23,36 +23,36 @@ The current release supports the following hardware platforms: Software for the following hardware platforms is in production support: -* Digi ConnectCore 6UL - * [Digi P/N CC-WMX-JN58-NE](http://www.digi.com/products/models/cc-wmx-jn58-ne) - * [Digi P/N CC-MX-JN58-Z1](https://www.digi.com/products/models/cc-mx-jn58-z1) - * Digi P/N CC-WMX-JN7A-NE -* Digi ConnectCore 6UL SBC Express - * [Digi P/N CC-WMX6UL-START](http://www.digi.com/products/models/cc-wmx6ul-start) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001548/default.htm#concept/yocto/c_get_started_with_yocto.htm)) -* Digi ConnectCore 6UL SBC Pro - * [Digi P/N CC-WMX6UL-KIT](https://www.digi.com/products/models/cc-wmx6ul-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001547/default.htm#concept/yocto/c_get_started_with_yocto.htm)) +## ConnectCore 6UL +* ConnectCore 6UL System-on-Module (SOM) + * [CC-WMX-JN58-NE](http://www.digi.com/products/models/cc-wmx-jn58-ne) + * [CC-MX-JN58-Z1](https://www.digi.com/products/models/cc-mx-jn58-z1) + * CC-WMX-JN7A-NE +* ConnectCore 6UL SBC Express + * [CC-WMX6UL-START](http://www.digi.com/products/models/cc-wmx6ul-start) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001548/default.htm#concept/yocto/c_get_started_with_yocto.htm)) +* ConnectCore 6UL SBC Pro + * [CC-WMX6UL-KIT](https://www.digi.com/products/models/cc-wmx6ul-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001547/default.htm#concept/yocto/c_get_started_with_yocto.htm)) -* Digi ConnectCore 6 - * [Digi P/N CC-WMX-J97C-TN](http://www.digi.com/products/models/cc-wmx-j97c-tn) - * [Digi P/N CC-WMX-L96C-TE](http://www.digi.com/products/models/cc-wmx-l96c-te) - * [Digi P/N CC-WMX-L87C-TE](http://www.digi.com/products/models/cc-wmx-l87c-te) - * [Digi P/N CC-MX-L76C-Z1](http://www.digi.com/products/models/cc-mx-l76c-z1) - * [Digi P/N CC-MX-L86C-Z1](http://www.digi.com/products/models/cc-mx-l86c-z1) - * [Digi P/N CC-MX-L96C-Z1](http://www.digi.com/products/models/cc-mx-l96c-z1) - * [Digi P/N CC-WMX-L76C-TE](http://www.digi.com/products/models/cc-wmx-l76c-te) - * Digi P/N CC-WMX-K87C-FJA - * Digi P/N CC-WMX-K77C-TE - * Digi P/N CC-WMX-L97D-TN - * Digi P/N CC-WMX-J98C-FJA - * Digi P/N CC-WMX-J98C-FJA-1 - -* Digi ConnectCore 6 Development Kit - * [Digi P/N CC-WMX6-KIT](http://www.digi.com/products/models/cc-wmx6-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001546/default.htm#concept/yocto/c_get_started_with_yocto.htm)) - -* Digi ConnectCore 6 SBC - * [Digi P/N CC-SB-WMX-J97C-1](http://www.digi.com/products/models/cc-sb-wmx-j97c-1) - * [Digi P/N CC-SB-WMX-L87C-1](https://www.digi.com/products/models/cc-sb-wmx-l87c-1) - * [Digi P/N CC-SB-WMX-L76C-1](https://www.digi.com/products/models/cc-sb-wmx-l76c-1) +## ConnectCore 6 +* ConnectCore 6 System-on-Module (SOM) + * [CC-WMX-J97C-TN](http://www.digi.com/products/models/cc-wmx-j97c-tn) + * [CC-WMX-L96C-TE](http://www.digi.com/products/models/cc-wmx-l96c-te) + * [CC-WMX-L87C-TE](http://www.digi.com/products/models/cc-wmx-l87c-te) + * [CC-MX-L76C-Z1](http://www.digi.com/products/models/cc-mx-l76c-z1) + * [CC-MX-L86C-Z1](http://www.digi.com/products/models/cc-mx-l86c-z1) + * [CC-MX-L96C-Z1](http://www.digi.com/products/models/cc-mx-l96c-z1) + * [CC-WMX-L76C-TE](http://www.digi.com/products/models/cc-wmx-l76c-te) + * CC-WMX-K87C-FJA + * CC-WMX-K77C-TE + * CC-WMX-L97D-TN + * CC-WMX-J98C-FJA + * CC-WMX-J98C-FJA-1 +* ConnectCore 6 Development Kit + * [CC-WMX6-KIT](http://www.digi.com/products/models/cc-wmx6-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001546/default.htm#concept/yocto/c_get_started_with_yocto.htm)) +* ConnectCore 6 SBC + * [CC-SB-WMX-J97C-1](http://www.digi.com/products/models/cc-sb-wmx-j97c-1) + * [CC-SB-WMX-L87C-1](https://www.digi.com/products/models/cc-sb-wmx-l87c-1) + * [CC-SB-WMX-L76C-1](https://www.digi.com/products/models/cc-sb-wmx-l76c-1) Previous versions of Digi Embedded Yocto include support for additional Digi hardware. @@ -68,9 +68,9 @@ To install, please follow the instructions at the dey-manifest [README](https:// Documentation is available online on the Digi documentation site: -* [Digi ConnectCore 6UL SBC Express](https://www.digi.com/resources/documentation/digidocs/90001548/default.htm) -* [Digi ConnectCore 6UL SBC Pro](https://www.digi.com/resources/documentation/digidocs/90001547/default.htm) -* [Digi ConnectCore 6 Jumpstart Development Kit](https://www.digi.com/resources/documentation/digidocs/90001546/default.htm) +* [ConnectCore 6UL SBC Express](https://www.digi.com/resources/documentation/digidocs/90001548/default.htm) +* [ConnectCore 6UL SBC Pro](https://www.digi.com/resources/documentation/digidocs/90001547/default.htm) +* [ConnectCore 6 Jumpstart Development Kit](https://www.digi.com/resources/documentation/digidocs/90001546/default.htm) # Downloads @@ -168,43 +168,43 @@ boot a signed U-Boot only. devices (ConnectCore 6UL and ConnectCore 6 Plus) running a 4.9 kernel version fail to join to autonomous groups. -## Digi ConnectCore 6UL +## ConnectCore 6UL -* The UART connected to the Bluetooth chip on early versions of the ConnectCore - 6UL system-on-module (hardware version < 4) cannot properly execute flow - control. To work around this issue, UART1 of these SOM versions has been - configured to operate at 115200 bps and without hardware flow control, - reducing the maximum throughput of this interface. -* When using wireless concurrent mode as the wireless interface is shared - between several different functionalities performance is reduced. -* When using wireless concurrent mode Digi recommends to keep the different - modes on the same frequency channels. For example, when configuring access - point mode on channel 36 on band A, the recommendation would be to connect - to the same channel both in station mode and WiFi direct so that the radio - performance is optimized -* When working as an access point, DFS capable channels in band A are not - currently supported. -* The QCA6564 wireless chip does not support Wake On Wireless LAN +* ConnectCore 6UL System-on-Module (SOM) + * The UART connected to the Bluetooth chip on early versions of the ConnectCore + 6UL system-on-module (hardware version < 4) cannot properly execute flow + control. To work around this issue, UART1 of these SOM versions has been + configured to operate at 115200 bps and without hardware flow control, + reducing the maximum throughput of this interface. + * When using wireless concurrent mode as the wireless interface is shared + between several different functionalities performance is reduced. + * When using wireless concurrent mode Digi recommends to keep the different + modes on the same frequency channels. For example, when configuring access + point mode on channel 36 on band A, the recommendation would be to connect + to the same channel both in station mode and WiFi direct so that the radio + performance is optimized. + * When working as an access point, DFS capable channels in band A are not + currently supported. + * The QCA6564 wireless chip does not support Wake On Wireless LAN. -## Digi ConnectCore 6 +## ConnectCore 6 -* NXP i.MX6 processor has a documented errata (ERR004512) whereby the maximum -performance of the Gigabit FEC is limited to 400Mbps (total for Tx and Rx) -* When using softAP mode on Band A on the Qualcomm AR6233, channels used for -Dynamic Frequency Selection (DFS) are not supported -* The Qualcomm AR6233 firmware does not support the following configuration -modes: - * Concurrent modes involving P2P mode, such as P2P + softAP or P2P + STA - * Bluetooth + softAP + STA concurrent mode -* A maximum of five clients are supported when using Qualcomm's AR6233 in -softAP mode -* A maximum of ten connected devices are supported when using Qualcomm's AR6233 -Bluetooth Low Energy mode - -## Digi ConnectCore 6 SBC - -* The Micrel PHY KSZ9031 may take between five and six seconds to -auto-negotiate with Gigabit switches +* ConnectCore 6 System-on-Module (SOM) + * NXP i.MX6 processor has a documented errata (ERR004512) whereby the maximum + performance of the Gigabit FEC is limited to 400Mbps (total for Tx and Rx). + * When using softAP mode on Band A on the Qualcomm AR6233, channels used for + Dynamic Frequency Selection (DFS) are not supported. + * The Qualcomm AR6233 firmware does not support the following configuration + modes: + * Concurrent modes involving P2P mode, such as P2P + softAP or P2P + STA. + * Bluetooth + softAP + STA concurrent mode. + * A maximum of five clients are supported when using Qualcomm's AR6233 in + softAP mode. + * A maximum of ten connected devices are supported when using Qualcomm's AR6233 + Bluetooth Low Energy mode. +* ConnectCore 6 SBC + * The Micrel PHY KSZ9031 may take between five and six seconds to + auto-negotiate with Gigabit switches. # Support Contact Information