From d1724ef6ffd15dd2e508e49279081a0c330d2e8a Mon Sep 17 00:00:00 2001 From: Alex Gonzalez Date: Fri, 24 Mar 2017 10:44:36 +0100 Subject: [PATCH] README: Update for dey-2.2 Signed-off-by: Alex Gonzalez --- README.md | 80 +++++++------------------------------------------------ 1 file changed, 10 insertions(+), 70 deletions(-) diff --git a/README.md b/README.md index 2013491c4..11214b995 100644 --- a/README.md +++ b/README.md @@ -13,7 +13,7 @@ online documentation. The current release supports the following hardware platforms: -Software for the following hardware platforms is in beta support: +Software for the following hardware platforms is in production support: * Digi ConnectCore 6UL * [Digi P/N CC-WMX-JN58-NE](http://www.digi.com/products/models/cc-wmx-jn58-ne) @@ -22,8 +22,6 @@ Software for the following hardware platforms is in beta support: * Digi ConnectCore 6UL Development Kit * [Digi P/N CC-WMX6UL-KIT](https://www.digi.com/products/models/cc-wmx6ul-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001515/default.htm#concept/yocto/c_get_started_with_yocto.htm)) -Software for the following hardware platforms is in production support: - * Digi ConnectCore 6 * [Digi P/N CC-WMX-J97C-TN](http://www.digi.com/products/models/cc-wmx-j97c-tn) * [Digi P/N CC-WMX-L96C-TE](http://www.digi.com/products/models/cc-wmx-l96c-te) @@ -64,75 +62,19 @@ Documentation is available online on the Digi documentation site: # Release Changelog -## 2.2-r1 +## 2.2-r2 * TBC -## 2.0-r5 +## 2.2-r1 -* Digi Embedded Yocto - * Support firmware update through the new recovery mode - * Initial support to connect to Remote Manager with the CloudConnector - * Updated U-Boot to version 'dub-2015.04-r7' for Digi ConnectCore 6 and 6UL -* Digi ConnectCore 6UL - * Added support to audio codec MAX98089 - * Added support to camera Omnivision OV5642 - * Optimized kernel configuration (smaller kernel) - * Added support for EDO mode on NAND Flash - * Added PMIC NVRAM support through sysfs - * Added suspend support for PMIC regulators - * Added support for i.MX6UL ADC channels - * Added voltage scaling support for MCA ADC - * Added full-system reset support to MCA watchdog - * Added MCA 32KHz output control through sysfs - * Added VRef output control through sysfs - * Added support to PWM1 on Starter Board expansion header - * Kernel v4.1.38 - -## 2.0-r4 - -* Digi ConnectCore 6UL - * Support for Digi ConnectCore 6UL SBC - * Linux kernel v4.1.35 - * Support for Fusion touch displays - * Authenticated and encrypted initramfs, bootscripts and DTBs - * Encrypted root filesystem - * MCA firmware update - * MCA tampering - * Power management optimizations -* Digi ConnectCore 6 - * Support for Quectel EC-20 LTE modem - * Authenticated and encrypted initramfs, bootscripts and DTBs - * Linux kernel v3.14.79 - * Minor bug fixes - -## 2.0-r3 - -* Support for the new Digi ConnectCore 6UL System-On-Module and Starter Kit - * U-Boot 2015.04 - * Linux kernel v4.1.28 -* Support for TrustFence security enhancements - * Secure console - * Secure boot - * Secure JTAG - * Encrypted root filesystem - * True Random Number Generator - -## 2.0-r2 - -* Release based on Yocto 2.0 (Jethro) for ConnectCore 6 SBC including: - * Update support for new PMIC hardware revision - * Minor bug fixes - -## 2.0-r1 - -* U-Boot 2015.04 for the Digi ConnectCore 6 System-On-Module and SBC -* Linux kernel v3.14.57 for the Digi ConnectCore 6 System-On-Module and SBC -* Release based on Yocto 2.0 (Jethro) for Digi ConnectCore 6 SBC including: - * Bluez5 - * QT5 (over X11 and Framebuffer graphical systems) - * New toolchain based on GCC-5.2 and GLIBC-2.22 - * Cellular support +* Release based on [Yocto 2.2 (Morty)](https://www.yoctoproject.org/downloads/core/morty22) including: + * New toolchain based on GCC-6.2.0 and GLIBC-2.24 + * Updated Qt 5.7 + * Cellular support, including the new Quectel EC21 cellular modem + * TrustFence enabled + * Remote manager + * Local and remote manager firmware update * Package upgrades and security fixes # Known Issues and Limitations @@ -143,8 +85,6 @@ updated list can be found on the online documentation. * If TrustFence (TM) image encryption support is enabled, the uSD image will boot a signed U-Boot only. * Firmware update - * Updating from a microSD card is not supported, only from local partitions - (e.g. the 'update' partition) or from external USB memory devices. * The software update package must be located in the root level of the update media (subfolders are not yet supported). * Cloud Connector