meta-digi-arm: add support for ccimx8x SBC Express platform

Add initial support for Digi ConnectCore 8X SBC Express.
- ccimx6qp was used as reference machine from meta-digi.
- imx8qxpmek was used as a reference machine from meta-fsl-bsp-release.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>

https://jira.digi.com/browse/DEL-5936

meta-digi-arm/conf/machine/ccimx8x-sbc-express.conf

@@ -0,0 +1,41 @@
+#@TYPE: Machine
+#@NAME: ConnectCore 8X Single Board Computer Express.
+#@DESCRIPTION: Machine configuration for Digi's ConnectCore 8X SBC Express.
+
+# Include the machine configuration for Digi's ConnectCore 8X module.
+include conf/machine/include/ccimx8x.inc
+
+# Wireless external module
+WIRELESS_MODULE_append = " ${@base_conditional('HAVE_WIFI', '1', 'kernel-module-qualcomm', '', d)}"
+
+# Wireless p2p interface
+WLAN_P2P_INTERFACE ?= "p2p0"
+
+MACHINE_EXTRA_RRECOMMENDS += " \
+    cryptoauthlib \
+    cryptoauth-openssl-engine \
+"
+
+# Firmware
+MACHINE_FIRMWARE_append = " ${@base_conditional('HAVE_BT', '1', 'firmware-qualcomm-qca6564-bt', '', d)}"
+MACHINE_FIRMWARE_append = " ${@base_conditional('HAVE_WIFI', '1', 'firmware-qualcomm-qca6564-wifi', '', d)}"
+
+# U-Boot configurations
+# Last one is the default (the one the symlinks point at)
+UBOOT_CONFIG ??= "ccimx8x_sbc_express"
+UBOOT_CONFIG[ccimx8x_sbc_express] = "ccimx8x_sbc_express_defconfig"
+
+KERNEL_DEVICETREE ?= " \
+    ccimx8x-sbc-express.dtb \
+"
+
+SERIAL_CONSOLES ?= "115200;ttyLP2"
+
+# Bluetooth tty
+BT_TTY ?= "ttyLP1"
+
+# U-Boot script to be copied to the boot image
+BOOT_SCRIPTS = "boot.scr:boot.scr"
+
+# Flash image types
+IMAGE_FSTYPES ?= "boot.vfat ext4 sdcard tar.bz2 recovery.vfat"

meta-digi-arm/conf/machine/include/ccimx8x.inc

@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: ConnectCore 8X module.
+#@DESCRIPTION: Machine configuration for Digi's ConnectCore 8X module.
+
+DIGI_FAMILY = "ccimx8x"
+MACHINEOVERRIDES =. "mx8:mx8x:mx8qxp:mx8dxp:mx8dx:${DIGI_FAMILY}:"
+
+include conf/machine/include/imx-digi-base.inc
+include conf/machine/include/arm/arch-arm64.inc
+
+# Platform u-boot settings
+UBOOT_SUFFIX = "bin"
+UBOOT_SYMLINK = "u-boot-${MACHINE}.${UBOOT_SUFFIX}"
+
+# Wireless external module
+WIRELESS_MODULE ?= ""
+
+# Firmware
+MACHINE_FIRMWARE ?= ""
+
+MACHINE_EXTRA_RDEPENDS += " \
+    e2fsprogs-mke2fs \
+    e2fsprogs-resize2fs \
+    parted \
+    u-boot-fw-utils \
+"
+
+MACHINE_EXTRA_RRECOMMENDS += " \
+    ${MACHINE_FIRMWARE} \
+    ${WIRELESS_MODULE} \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', 'imx-alsa-plugins', '', d)} \
+    cryptodev-module \
+"
+
+MACHINE_FEATURES += "accel-graphics accel-video wifi bluetooth"

meta-digi-arm/conf/machine/include/digi-defaults.inc

@@ -13,6 +13,7 @@ PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 # ccimx6        4.1, 3.14          2015.04
 # ccimx6qp      4.9                2015.04
 # ccimx6ul      4.9, 4.1           2015.04
+# ccimx8x       4.9                2017.03
 #
 
 # Help variables used in recipes

meta-digi-arm/conf/machine/include/imx-digi-base.inc

@@ -3,6 +3,7 @@ include conf/machine/include/digi-defaults.inc
 
 XSERVER_DRIVER = "xf86-video-fbdev"
 XSERVER_DRIVER_imxgpu2d = "xf86-video-imxfb-vivante"
+XSERVER_DRIVER_append_mx8 = " xf86-video-modesetting"
 XSERVER = "xserver-xorg \
            xf86-input-evdev \
            ${XSERVER_DRIVER}"
@@ -19,23 +20,33 @@ MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
 # handled by hardware
 DEFAULTTUNE_mx6 ?= "cortexa9thf-neon"
 DEFAULTTUNE_mx6ul ?= "cortexa7thf-neon"
+DEFAULTTUNE_mx8 ?= "aarch64"
 
 INHERIT += "machine-overrides-extender"
 
 MACHINEOVERRIDES_EXTENDER_mx6q  = "imxipu:imxvpu:imxgpu2d:imxgpu3d"
 MACHINEOVERRIDES_EXTENDER_mx6dl = "imxpxp:imxipu:imxvpu:imxgpu2d:imxgpu3d:imxepdc"
 MACHINEOVERRIDES_EXTENDER_mx6ul = "imxpxp"
+MACHINEOVERRIDES_EXTENDER_mx8qxp = "imxdrm:imxdpu:imxvpuamphion:imxgpu:imxgpu2d:imxgpu3d"
 
 # Sub-architecture support
 MACHINE_SOCARCH_SUFFIX ?= ""
 MACHINE_SOCARCH_SUFFIX_mx6q = "-mx6qdl"
 MACHINE_SOCARCH_SUFFIX_mx6dl = "-mx6qdl"
 MACHINE_SOCARCH_SUFFIX_mx6ul = "-mx6ul"
+MACHINE_SOCARCH_SUFFIX_mx8qxp = "-mx8qxp"
+MACHINE_SOCARCH_SUFFIX_mx8dxp = "-mx8dxp"
+MACHINE_SOCARCH_SUFFIX_mx8dx = "-mx8dx"
 
 MACHINE_ARCH_FILTER = "virtual/kernel"
 MACHINE_SOCARCH_FILTER_append_imxvpu = " imx-vpu libimxvpuapi imx-codec imx-vpuwrap imx-parser"
 MACHINE_SOCARCH_FILTER_append_imxgpu2d = " virtual/libopenvg virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa virtual/libgl virtual/libg2d cairo pango"
 MACHINE_SOCARCH_FILTER_append_imxpxp = " imx-codec imx-parser"
+MACHINE_SOCARCH_FILTER_append_mx8 = " \
+    virtual/libopenvx \
+    virtual/opencl-icd \
+    opencl-headers \
+"
 
 INHERIT += "fsl-dynamic-packagearch"
 
@@ -55,11 +66,13 @@ MACHINE_GSTREAMER_1_0_PLUGIN ?= ""
 MACHINE_GSTREAMER_1_0_PLUGIN_mx6q ?= "imx-gst1.0-plugin imx-gst1.0-plugin-gplay imx-gst1.0-plugin-grecorder"
 MACHINE_GSTREAMER_1_0_PLUGIN_mx6dl ?= "imx-gst1.0-plugin imx-gst1.0-plugin-gplay imx-gst1.0-plugin-grecorder"
 MACHINE_GSTREAMER_1_0_PLUGIN_mx6ul ?= "imx-gst1.0-plugin imx-gst1.0-plugin-gplay imx-gst1.0-plugin-grecorder"
+MACHINE_GSTREAMER_1_0_PLUGIN_mx8 ?= "imx-gst1.0-plugin imx-gst1.0-plugin-gplay imx-gst1.0-plugin-grecorder"
 
 # Determines if the SoC has support for Vivante kernel driver
 SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT       = "0"
 SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT_mx6q  = "1"
 SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT_mx6dl = "1"
+SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT_mx8   = "1"
 
 # Handle Vivante kernel driver setting:
 #   0 - machine does not have Vivante GPU driver support
@@ -70,21 +83,26 @@ MACHINE_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT ?= "${SOC_HAS_VIVANTE_KERNEL_DRIVER_SU
 PREFERRED_PROVIDER_virtual/egl_mx6q ?= "imx-gpu-viv"
 PREFERRED_PROVIDER_virtual/egl_mx6dl ?= "imx-gpu-viv"
 PREFERRED_PROVIDER_virtual/egl_mx6ul ?= "mesa"
+PREFERRED_PROVIDER_virtual/egl_mx8 ?= "imx-gpu-viv"
 
 PREFERRED_PROVIDER_virtual/libgles1_mx6q ?= "imx-gpu-viv"
 PREFERRED_PROVIDER_virtual/libgles1_mx6dl ?= "imx-gpu-viv"
 PREFERRED_PROVIDER_virtual/libgles1_mx6ul ?= "mesa"
+PREFERRED_PROVIDER_virtual/libgles1_mx8 ?= "imx-gpu-viv"
 
 PREFERRED_PROVIDER_virtual/libgles2_mx6q ?= "imx-gpu-viv"
 PREFERRED_PROVIDER_virtual/libgles2_mx6dl ?= "imx-gpu-viv"
 PREFERRED_PROVIDER_virtual/libgles2_mx6ul ?= "mesa"
+PREFERRED_PROVIDER_virtual/libgles2_mx8 ?= "imx-gpu-viv"
 
 PREFERRED_PROVIDER_virtual/libgl_mx6q ?= "imx-gpu-viv"
 PREFERRED_PROVIDER_virtual/libgl_mx6dl ?= "imx-gpu-viv"
 PREFERRED_PROVIDER_virtual/libgl_mx6ul ?= "mesa"
+PREFERRED_PROVIDER_virtual/libgl_mx8 ?= "imx-gpu-viv"
 
 PREFERRED_PROVIDER_virtual/libg2d_mx6 ?= "imx-gpu-viv"
 PREFERRED_PROVIDER_virtual/libg2d_mx6ul = ""
+PREFERRED_PROVIDER_virtual/libg2d_mx8 = "imx-dpu-g2d"
 
 EXTRA_IMAGEDEPENDS = "u-boot"
 

sdk/build-github.sh

@@ -3,7 +3,7 @@
 #
 #  build-github.sh
 #
-#  Copyright (C) 2015-2017 by Digi International Inc.
+#  Copyright (C) 2015-2018 by Digi International Inc.
 #  All rights reserved.
 #
 #  This program is free software; you can redistribute it and/or modify it
@@ -22,7 +22,7 @@
 
 set -e
 
-AVAILABLE_PLATFORMS="ccimx6qpsbc ccimx6sbc ccimx6ulsbc ccimx6ulstarter"
+AVAILABLE_PLATFORMS="ccimx8x-sbc-express ccimx6qpsbc ccimx6sbc ccimx6ulsbc ccimx6ulstarter"
 
 MANIFEST_URL="https://github.com/digi-embedded/dey-manifest.git"
 
@@ -119,6 +119,7 @@ while read _pl _tgt; do
 	[ -n "${DY_TARGET}" ] && _tgt="${DY_TARGET}" || true
 	eval "${_pl}_tgt=\"${_tgt}\""
 done<<-_EOF_
+	ccimx8x-sbc-express  dey-image-qt
 	ccimx6qpsbc          dey-image-qt
 	ccimx6sbc            dey-image-qt
 	ccimx6ulsbc          dey-image-qt

sdk/build.sh

@@ -3,7 +3,7 @@
 #
 #  build.sh
 #
-#  Copyright (C) 2013-2017 by Digi International Inc.
+#  Copyright (C) 2013-2018 by Digi International Inc.
 #  All rights reserved.
 #
 #  This program is free software; you can redistribute it and/or modify it
@@ -169,6 +169,7 @@ while read _pl _var _tgt; do
 	eval "${_pl}_var=\"${_var//,/ }\""
 	eval "${_pl}_tgt=\"${_tgt//,/ }\""
 done<<-_EOF_
+	ccimx8x-sbc-express  DONTBUILDVARIANTS   dey-image-qt,dey-image-aws
 	ccimx6qpsbc          DONTBUILDVARIANTS   dey-image-qt,dey-image-aws
 	ccimx6sbc            DONTBUILDVARIANTS   dey-image-qt,dey-image-aws
 	ccimx6ulsbc          DONTBUILDVARIANTS   dey-image-qt,dey-image-aws

sdk/config/ccimx8x-sbc-express/bblayers.conf.sample

@@ -0,0 +1,22 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ##OEROOT##/meta \
+  ##OEROOT##/meta-poky \
+  ##OEROOT##/meta-yocto-bsp \
+  ##DIGIBASE##/meta-openembedded/meta-oe \
+  ##DIGIBASE##/meta-openembedded/meta-python \
+  ##DIGIBASE##/meta-openembedded/meta-networking \
+  ##DIGIBASE##/meta-openembedded/meta-webserver \
+  ##DIGIBASE##/meta-qt5 \
+  ##DIGIBASE##/meta-swupdate \
+  ##DIGIBASE##/meta-freescale \
+  ##DIGIBASE##/meta-fsl-demos \
+  ##DIGIBASE##/meta-digi/meta-digi-arm \
+  ##DIGIBASE##/meta-digi/meta-digi-dey \
+  "

sdk/config/ccimx8x-sbc-express/conf-notes.txt

@@ -0,0 +1,18 @@
+Digi Embedded Yocto provides the following image recipes:
+
+  * dey-image-qt: graphical QT image
+
+    By default the image is X11-based so it provides a full SATO theme
+    desktop environment.
+
+    To compile the image for the framebuffer (instead of X11) add the
+    following line to the project's conf/local.conf:
+
+    DISTRO_FEATURES_remove = "x11"
+
+  * dey-image-aws: console-only image supporting Amazon Web Services IoT
+
+    This image includes the AWS Greengrass Core and an AWS IoT platform
+    example application. For more information on AWS support in Digi
+    Embedded Yocto see the online documentation.
+

sdk/config/ccimx8x-sbc-express/local.conf.sample

@@ -0,0 +1,254 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+#MACHINE ??= "qemux86"
+
+MACHINE = "ccimx8x-sbc-express"
+
+#
+# Use Digi's internal git repositories
+#
+#DIGI_INTERNAL_GIT ?= "1"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "dey"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+#
+# Enable local PR server
+#
+PRSERV_HOST = "localhost:0"
+
+#
+# Some libraries and packages are covered by NXP EULA
+#
+#ACCEPT_FSL_EULA = "1"