meta-digi: remove not supported ccimx6adpt
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit is contained in:
Javier Viguera
parent
0514d03e0e
commit
dbd966543e
|
|
@ -1,23 +0,0 @@
|
|||
#@TYPE: Machine
|
||||
#@NAME: ConnectCore 6 JumpStart Kit.
|
||||
#@DESCRIPTION: Machine configuration for Digi's ConnectCore 6 JSK.
|
||||
|
||||
# Contains the ConnectCore 6 module.
|
||||
include conf/machine/include/ccimx6.inc
|
||||
|
||||
KERNEL_DEVICETREE = "imx6q-${MACHINE}.dtb"
|
||||
|
||||
SERIAL_CONSOLES = "115200;ttymxc0"
|
||||
|
||||
# U-Boot script to be copied to the SD image
|
||||
BOOT_SCRIPTS = "boot-sd.scr:boot.scr"
|
||||
|
||||
#
|
||||
# Partition sizes
|
||||
# ---------------
|
||||
# boot: 64 MiB
|
||||
# system: 512 MiB
|
||||
#
|
||||
BOARD_BOOTIMAGE_PARTITION_SIZE ?= "67108864"
|
||||
|
||||
IMAGE_FSTYPES ?= "boot.vfat ext4 sdcard tar.bz2"
|
||||
|
|
@ -1,284 +0,0 @@
|
|||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_KERNEL_LZO=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=18
|
||||
CONFIG_CGROUPS=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_PERF_EVENTS=y
|
||||
# CONFIG_SLUB_DEBUG is not set
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_MACH_IMX51_DT=y
|
||||
CONFIG_SOC_IMX53=y
|
||||
CONFIG_SOC_IMX6Q=y
|
||||
CONFIG_SOC_IMX6SL=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_VMSPLIT_2G=y
|
||||
CONFIG_PREEMPT_VOLUNTARY=y
|
||||
CONFIG_AEABI=y
|
||||
# CONFIG_OABI_COMPAT is not set
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
||||
CONFIG_ARM_IMX6_CPUFREQ=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_PM_RUNTIME=y
|
||||
CONFIG_PM_DEBUG=y
|
||||
CONFIG_PM_TEST_SUSPEND=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_SYN_COOKIES=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
CONFIG_IPV6=y
|
||||
CONFIG_NETFILTER=y
|
||||
CONFIG_BRIDGE=y
|
||||
CONFIG_NET_SCHED=y
|
||||
CONFIG_CAN=y
|
||||
CONFIG_CAN_FLEXCAN=y
|
||||
CONFIG_BT=y
|
||||
CONFIG_BT_RFCOMM=y
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=y
|
||||
CONFIG_BT_BNEP_MC_FILTER=y
|
||||
CONFIG_BT_BNEP_PROTO_FILTER=y
|
||||
CONFIG_BT_HIDP=y
|
||||
CONFIG_BT_HCIUART=y
|
||||
CONFIG_BT_HCIUART_ATH3K=y
|
||||
CONFIG_WIRELESS_EXT=y
|
||||
CONFIG_RFKILL=y
|
||||
CONFIG_RFKILL_INPUT=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_STANDALONE is not set
|
||||
CONFIG_CMA=y
|
||||
CONFIG_CMA_SIZE_MBYTES=320
|
||||
CONFIG_IMX_WEIM=y
|
||||
CONFIG_CONNECTOR=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=65536
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_EEPROM_AT25=y
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_SCSI_CONSTANTS=y
|
||||
CONFIG_SCSI_LOGGING=y
|
||||
CONFIG_SCSI_SCAN_ASYNC=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_ATA=y
|
||||
CONFIG_SATA_AHCI_PLATFORM=y
|
||||
CONFIG_AHCI_IMX=y
|
||||
CONFIG_PATA_IMX=y
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NET_CADENCE is not set
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_CIRRUS is not set
|
||||
# CONFIG_NET_VENDOR_FARADAY is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_MICROCHIP is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
# CONFIG_NET_VENDOR_STMICRO is not set
|
||||
# CONFIG_NET_VENDOR_WIZNET is not set
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_MICREL_PHY=y
|
||||
# CONFIG_WLAN is not set
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
CONFIG_KEYBOARD_IMX=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_FUSION_7_10=y
|
||||
CONFIG_TOUCHSCREEN_MC13783=y
|
||||
CONFIG_INPUT_MISC=y
|
||||
CONFIG_INPUT_MMA8450=y
|
||||
CONFIG_INPUT_DA9063_ONKEY=y
|
||||
CONFIG_INPUT_ISL29023=y
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_IMX=y
|
||||
CONFIG_SERIAL_IMX_CONSOLE=y
|
||||
CONFIG_SERIAL_FSL_LPUART=y
|
||||
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
|
||||
CONFIG_FSL_OTP=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_I2C_COMPAT is not set
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
# CONFIG_I2C_HELPER_AUTO is not set
|
||||
CONFIG_I2C_IMX=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_IMX=y
|
||||
CONFIG_SPI_SPIDEV=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_GPIO_DA9063=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_SENSORS_DA9063=y
|
||||
CONFIG_SENSORS_MAG3110=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_IMX_THERMAL=y
|
||||
CONFIG_DEVICE_THERMAL=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_IMX2_WDT=y
|
||||
CONFIG_MFD_DA9052_I2C=y
|
||||
CONFIG_MFD_MC13XXX_SPI=y
|
||||
CONFIG_MFD_MC13XXX_I2C=y
|
||||
CONFIG_MFD_DA9063=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_DA9052=y
|
||||
CONFIG_REGULATOR_ANATOP=y
|
||||
CONFIG_REGULATOR_MC13783=y
|
||||
CONFIG_REGULATOR_MC13892=y
|
||||
CONFIG_REGULATOR_DA9063=y
|
||||
CONFIG_REGULATOR_PFUZE100=y
|
||||
CONFIG_MEDIA_SUPPORT=y
|
||||
CONFIG_MEDIA_CAMERA_SUPPORT=y
|
||||
CONFIG_VIDEO_V4L2_INT_DEVICE=y
|
||||
CONFIG_MEDIA_USB_SUPPORT=y
|
||||
CONFIG_USB_VIDEO_CLASS=y
|
||||
# CONFIG_USB_GSPCA is not set
|
||||
CONFIG_V4L_PLATFORM_DRIVERS=y
|
||||
CONFIG_VIDEO_MXC_OUTPUT=y
|
||||
CONFIG_VIDEO_MXC_CAPTURE=y
|
||||
CONFIG_MXC_CAMERA_OV5642=y
|
||||
CONFIG_MXC_CAMERA_OV5640_MIPI=y
|
||||
CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=y
|
||||
CONFIG_VIDEO_MXC_IPU_OUTPUT=y
|
||||
CONFIG_VIDEO_MXC_PXP_V4L2=y
|
||||
CONFIG_SOC_CAMERA=y
|
||||
CONFIG_VIDEO_MX3=y
|
||||
CONFIG_SOC_CAMERA_OV2640=y
|
||||
CONFIG_DRM=y
|
||||
CONFIG_DRM_VIVANTE=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MXS=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
CONFIG_LCD_L4F00242T03=y
|
||||
CONFIG_LCD_PLATFORM=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_PWM=y
|
||||
CONFIG_FB_MXC_SYNC_PANEL=y
|
||||
CONFIG_FB_MXC_LDB=y
|
||||
CONFIG_FB_MXC_MIPI_DSI=y
|
||||
CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
|
||||
CONFIG_FB_MXC_HDMI=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_FB_LOGO_CENTERED=y
|
||||
CONFIG_FB_LOGO_FORCE_SINGLE=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
# CONFIG_LOGO_LINUX_CLUT224 is not set
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SND=y
|
||||
# CONFIG_SND_SUPPORT_OLD_API is not set
|
||||
# CONFIG_SND_VERBOSE_PROCFS is not set
|
||||
# CONFIG_SND_DRIVERS is not set
|
||||
# CONFIG_SND_ARM is not set
|
||||
# CONFIG_SND_SPI is not set
|
||||
# CONFIG_SND_USB is not set
|
||||
CONFIG_SND_SOC=y
|
||||
CONFIG_SND_IMX_SOC=y
|
||||
CONFIG_SND_SOC_IMX_SGTL5000=y
|
||||
CONFIG_SND_SOC_IMX_HDMI=y
|
||||
CONFIG_HID_MULTITOUCH=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_OTG=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_ACM=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_CHIPIDEA=y
|
||||
CONFIG_USB_CHIPIDEA_UDC=y
|
||||
CONFIG_USB_CHIPIDEA_HOST=y
|
||||
CONFIG_USB_PHY=y
|
||||
CONFIG_USB_MXS_PHY=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_USB_G_SERIAL=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
||||
CONFIG_MXC_IPU=y
|
||||
CONFIG_MXC_GPU_VIV=y
|
||||
CONFIG_MXC_ASRC=y
|
||||
CONFIG_MXC_MIPI_CSI2=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_DA9063=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
|
||||
CONFIG_RTC_DRV_DA9063=y
|
||||
CONFIG_RTC_DRV_MC13XXX=y
|
||||
CONFIG_RTC_DRV_MXC=y
|
||||
CONFIG_RTC_DRV_SNVS=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_MXC_PXP_V2=y
|
||||
CONFIG_IMX_SDMA=y
|
||||
CONFIG_MXS_DMA=y
|
||||
CONFIG_COMMON_CLK_DEBUG=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_IMX=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
# CONFIG_MISC_FILESYSTEMS is not set
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_DEFAULT="cp437"
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ASCII=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_ISO8859_15=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_FTRACE is not set
|
||||
# CONFIG_ARM_UNWIND is not set
|
||||
CONFIG_SECURITYFS=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
|
|
@ -36,7 +36,7 @@ bt_init() {
|
|||
exit
|
||||
fi
|
||||
BT_PWR_GPIO_NR="21"
|
||||
elif [ "${MACHINENAME}" = "ccimx6adpt" -o "${MACHINENAME}" = "ccimx6sbc" ]; then
|
||||
elif [ "${MACHINENAME}" = "ccimx6sbc" ]; then
|
||||
BLUE_TOOTH_VARIANTS="0x02 0x03 0x04 0x06"
|
||||
MOD_VARIANT="$(cat /proc/device-tree/digi,hwid,variant)"
|
||||
if ! echo ${BLUE_TOOTH_VARIANTS} | grep -qs ${MOD_VARIANT}; then
|
||||
|
|
@ -136,7 +136,7 @@ echo "Starting bluetooth services."
|
|||
|
||||
# Initialize driver for 'ccardimx28js'
|
||||
MACHINENAME="$(cat /proc/device-tree/digi,machine,name 2>/dev/null || cat /sys/kernel/machine/name)"
|
||||
[ "${MACHINENAME}" = "ccardimx28" -o "${MACHINENAME}" = "ccimx6adpt" -o "${MACHINENAME}" = "ccimx6sbc" ] && bt_init
|
||||
[ "${MACHINENAME}" = "ccardimx28" -o "${MACHINENAME}" = "ccimx6sbc" ] && bt_init
|
||||
|
||||
# Run bluetooth daemon
|
||||
if hciconfig hci0 up && bluetoothd; then
|
||||
|
|
|
|||
|
|
@ -133,7 +133,6 @@ done<<-_EOF_
|
|||
ccardimx28js - e w wb web web1
|
||||
ccimx51js 128 128a 128agv agv eagv w w128a w128agv wagv weagv
|
||||
ccimx53js - 128 4k e e4k w w128 we
|
||||
ccimx6adpt - w wb
|
||||
ccimx6sbc - w wb
|
||||
_EOF_
|
||||
|
||||
|
|
@ -144,7 +143,6 @@ done<<-_EOF_
|
|||
ccardimx28js y
|
||||
ccimx51js n
|
||||
ccimx53js n
|
||||
ccimx6adpt n
|
||||
ccimx6sbc n
|
||||
_EOF_
|
||||
|
||||
|
|
|
|||
|
|
@ -1,24 +0,0 @@
|
|||
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
|
||||
# changes incompatibly
|
||||
LCONF_VERSION = "6"
|
||||
|
||||
BBPATH = "${TOPDIR}"
|
||||
BBFILES ?= ""
|
||||
|
||||
BBLAYERS ?= " \
|
||||
##OEROOT##/meta \
|
||||
##OEROOT##/meta-yocto \
|
||||
##OEROOT##/meta-yocto-bsp \
|
||||
##DIGIBASE##/meta-openembedded/meta-oe \
|
||||
##DIGIBASE##/meta-openembedded/meta-python \
|
||||
##DIGIBASE##/meta-openembedded/meta-networking \
|
||||
##DIGIBASE##/meta-openembedded/meta-webserver \
|
||||
##DIGIBASE##/meta-fsl-arm \
|
||||
##DIGIBASE##/meta-fsl-demos \
|
||||
##DIGIBASE##/meta-digi/meta-digi-arm \
|
||||
##DIGIBASE##/meta-digi/meta-digi-dey \
|
||||
"
|
||||
BBLAYERS_NON_REMOVABLE ?= " \
|
||||
##OEROOT##/meta \
|
||||
##OEROOT##/meta-yocto \
|
||||
"
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
Digi Embedded Yocto provides two target images:
|
||||
|
||||
* dey-image-minimal: command line busybox-based image
|
||||
|
||||
This image does not support the X11 window system so in order to build
|
||||
it you need to add the following line to the project's conf/local.conf:
|
||||
|
||||
DISTRO_FEATURES_remove = "x11"
|
||||
|
||||
* dey-image-graphical: graphical X11-based image with SATO theme
|
||||
|
||||
|
|
@ -1,244 +0,0 @@
|
|||
#
|
||||
# This file is your local configuration file and is where all local user settings
|
||||
# are placed. The comments in this file give some guide to the options a new user
|
||||
# to the system might want to change but pretty much any configuration option can
|
||||
# be set in this file. More adventurous users can look at local.conf.extended
|
||||
# which contains other examples of configuration which can be placed in this file
|
||||
# but new users likely won't need any of them initially.
|
||||
#
|
||||
# Lines starting with the '#' character are commented out and in some cases the
|
||||
# default values are provided as comments to show people example syntax. Enabling
|
||||
# the option is a question of removing the # character and making any change to the
|
||||
# variable as required.
|
||||
|
||||
#
|
||||
# Machine Selection
|
||||
#
|
||||
# You need to select a specific machine to target the build with. There are a selection
|
||||
# of emulated machines available which can boot and run in the QEMU emulator:
|
||||
#
|
||||
#MACHINE ?= "qemuarm"
|
||||
#MACHINE ?= "qemumips"
|
||||
#MACHINE ?= "qemuppc"
|
||||
#MACHINE ?= "qemux86"
|
||||
#MACHINE ?= "qemux86-64"
|
||||
#
|
||||
# There are also the following hardware board target machines included for
|
||||
# demonstration purposes:
|
||||
#
|
||||
#MACHINE ?= "beaglebone"
|
||||
#MACHINE ?= "genericx86"
|
||||
#MACHINE ?= "genericx86-64"
|
||||
#MACHINE ?= "mpc8315e-rdb"
|
||||
#MACHINE ?= "edgerouter"
|
||||
#
|
||||
# This sets the default machine to be qemux86 if no other machine is selected:
|
||||
#MACHINE ??= "qemux86"
|
||||
|
||||
MACHINE = "ccimx6adpt"
|
||||
MACHINE_VARIANT = "w"
|
||||
|
||||
#
|
||||
# Use Digi's internal git repositories
|
||||
#
|
||||
#DIGI_INTERNAL_GIT ?= "1"
|
||||
|
||||
#
|
||||
# Where to place downloads
|
||||
#
|
||||
# During a first build the system will download many different source code tarballs
|
||||
# from various upstream projects. This can take a while, particularly if your network
|
||||
# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
|
||||
# can preserve this directory to speed up this part of subsequent builds. This directory
|
||||
# is safe to share between multiple builds on the same machine too.
|
||||
#
|
||||
# The default is a downloads directory under TOPDIR which is the build directory.
|
||||
#
|
||||
#DL_DIR ?= "${TOPDIR}/downloads"
|
||||
|
||||
#
|
||||
# Where to place shared-state files
|
||||
#
|
||||
# BitBake has the capability to accelerate builds based on previously built output.
|
||||
# This is done using "shared state" files which can be thought of as cache objects
|
||||
# and this option determines where those files are placed.
|
||||
#
|
||||
# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
|
||||
# from these files if no changes were made to the configuration. If changes were made
|
||||
# to the configuration, only shared state files where the state was still valid would
|
||||
# be used (done using checksums).
|
||||
#
|
||||
# The default is a sstate-cache directory under TOPDIR.
|
||||
#
|
||||
#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
|
||||
|
||||
#
|
||||
# Where to place the build output
|
||||
#
|
||||
# This option specifies where the bulk of the building work should be done and
|
||||
# where BitBake should place its temporary files and output. Keep in mind that
|
||||
# this includes the extraction and compilation of many applications and the toolchain
|
||||
# which can use Gigabytes of hard disk space.
|
||||
#
|
||||
# The default is a tmp directory under TOPDIR.
|
||||
#
|
||||
#TMPDIR = "${TOPDIR}/tmp"
|
||||
|
||||
#
|
||||
# Default policy config
|
||||
#
|
||||
# The distribution setting controls which policy settings are used as defaults.
|
||||
# The default value is fine for general Yocto project use, at least initially.
|
||||
# Ultimately when creating custom policy, people will likely end up subclassing
|
||||
# these defaults.
|
||||
#
|
||||
DISTRO ?= "dey"
|
||||
# As an example of a subclass there is a "bleeding" edge policy configuration
|
||||
# where many versions are set to the absolute latest code from the upstream
|
||||
# source control systems. This is just mentioned here as an example, its not
|
||||
# useful to most new users.
|
||||
# DISTRO ?= "poky-bleeding"
|
||||
|
||||
#
|
||||
# Package Management configuration
|
||||
#
|
||||
# This variable lists which packaging formats to enable. Multiple package backends
|
||||
# can be enabled at once and the first item listed in the variable will be used
|
||||
# to generate the root filesystems.
|
||||
# Options are:
|
||||
# - 'package_deb' for debian style deb files
|
||||
# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
|
||||
# - 'package_rpm' for rpm style packages
|
||||
# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
|
||||
# We default to rpm:
|
||||
PACKAGE_CLASSES ?= "package_rpm"
|
||||
|
||||
#
|
||||
# SDK/ADT target architecture
|
||||
#
|
||||
# This variable specifies the architecture to build SDK/ADT items for and means
|
||||
# you can build the SDK packages for architectures other than the machine you are
|
||||
# running the build on (i.e. building i686 packages on an x86_64 host).
|
||||
# Supported values are i686 and x86_64
|
||||
#SDKMACHINE ?= "i686"
|
||||
|
||||
#
|
||||
# Extra image configuration defaults
|
||||
#
|
||||
# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
|
||||
# images. Some of these options are added to certain image types automatically. The
|
||||
# variable can contain the following options:
|
||||
# "dbg-pkgs" - add -dbg packages for all installed packages
|
||||
# (adds symbol information for debugging/profiling)
|
||||
# "dev-pkgs" - add -dev packages for all installed packages
|
||||
# (useful if you want to develop against libs in the image)
|
||||
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
|
||||
# (useful if you want to run the package test suites)
|
||||
# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
|
||||
# "tools-debug" - add debugging tools (gdb, strace)
|
||||
# "eclipse-debug" - add Eclipse remote debugging support
|
||||
# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
|
||||
# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
|
||||
# "debug-tweaks" - make an image suitable for development
|
||||
# e.g. ssh root access has a blank password
|
||||
# There are other application targets that can be used here too, see
|
||||
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
|
||||
# We default to enabling the debugging tweaks.
|
||||
EXTRA_IMAGE_FEATURES = "debug-tweaks"
|
||||
|
||||
#
|
||||
# Additional image features
|
||||
#
|
||||
# The following is a list of additional classes to use when building images which
|
||||
# enable extra features. Some available options which can be included in this variable
|
||||
# are:
|
||||
# - 'buildstats' collect build statistics
|
||||
# - 'image-mklibs' to reduce shared library files size for an image
|
||||
# - 'image-prelink' in order to prelink the filesystem image
|
||||
# - 'image-swab' to perform host system intrusion detection
|
||||
# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
|
||||
# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
|
||||
USER_CLASSES ?= "buildstats image-mklibs image-prelink"
|
||||
|
||||
#
|
||||
# Runtime testing of images
|
||||
#
|
||||
# The build system can test booting virtual machine images under qemu (an emulator)
|
||||
# after any root filesystems are created and run tests against those images. To
|
||||
# enable this uncomment this line. See classes/testimage(-auto).bbclass for
|
||||
# further details.
|
||||
#TEST_IMAGE = "1"
|
||||
#
|
||||
# Interactive shell configuration
|
||||
#
|
||||
# Under certain circumstances the system may need input from you and to do this it
|
||||
# can launch an interactive shell. It needs to do this since the build is
|
||||
# multithreaded and needs to be able to handle the case where more than one parallel
|
||||
# process may require the user's attention. The default is iterate over the available
|
||||
# terminal types to find one that works.
|
||||
#
|
||||
# Examples of the occasions this may happen are when resolving patches which cannot
|
||||
# be applied, to use the devshell or the kernel menuconfig
|
||||
#
|
||||
# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
|
||||
# Note: currently, Konsole support only works for KDE 3.x due to the way
|
||||
# newer Konsole versions behave
|
||||
#OE_TERMINAL = "auto"
|
||||
# By default disable interactive patch resolution (tasks will just fail instead):
|
||||
PATCHRESOLVE = "noop"
|
||||
|
||||
#
|
||||
# Disk Space Monitoring during the build
|
||||
#
|
||||
# Monitor the disk space during the build. If there is less that 1GB of space or less
|
||||
# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
|
||||
# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
|
||||
# of the build. The reason for this is that running completely out of space can corrupt
|
||||
# files and damages the build in ways which may not be easily recoverable.
|
||||
BB_DISKMON_DIRS = "\
|
||||
STOPTASKS,${TMPDIR},1G,100K \
|
||||
STOPTASKS,${DL_DIR},1G,100K \
|
||||
STOPTASKS,${SSTATE_DIR},1G,100K \
|
||||
ABORT,${TMPDIR},100M,1K \
|
||||
ABORT,${DL_DIR},100M,1K \
|
||||
ABORT,${SSTATE_DIR},100M,1K"
|
||||
|
||||
#
|
||||
# Shared-state files from other locations
|
||||
#
|
||||
# As mentioned above, shared state files are prebuilt cache data objects which can
|
||||
# used to accelerate build time. This variable can be used to configure the system
|
||||
# to search other mirror locations for these objects before it builds the data itself.
|
||||
#
|
||||
# This can be a filesystem directory, or a remote url such as http or ftp. These
|
||||
# would contain the sstate-cache results from previous builds (possibly from other
|
||||
# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
|
||||
# cache locations to check for the shared objects.
|
||||
# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
|
||||
# at the end as shown in the examples below. This will be substituted with the
|
||||
# correct path within the directory structure.
|
||||
#SSTATE_MIRRORS ?= "\
|
||||
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
|
||||
#file://.* file:///some/local/dir/sstate/PATH"
|
||||
|
||||
|
||||
#
|
||||
# Qemu configuration
|
||||
#
|
||||
# By default qemu will build with a builtin VNC server where graphical output can be
|
||||
# seen. The two lines below enable the SDL backend too. This assumes there is a
|
||||
# libsdl library available on your build system.
|
||||
PACKAGECONFIG_append_pn-qemu-native = " sdl"
|
||||
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
|
||||
ASSUME_PROVIDED += "libsdl-native"
|
||||
|
||||
|
||||
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
|
||||
# track the version of this file when it was generated. This can safely be ignored if
|
||||
# this doesn't mean anything to you.
|
||||
CONF_VERSION = "1"
|
||||
|
||||
#
|
||||
# Enable local PR server
|
||||
#
|
||||
PRSERV_HOST = "localhost:0"
|
||||
Loading…
Reference in New Issue