From de46b4ae85132fe8b04218c554d9813d322a429d Mon Sep 17 00:00:00 2001 From: Mike Engel Date: Tue, 18 Jan 2022 13:06:26 +0100 Subject: [PATCH] ccmp15-dvk: add CCMP15-DVK platform configuration Signed-off-by: Mike Engel --- meta-digi-arm/conf/machine/ccmp15-dvk.conf | 94 +++++++ sdk/build-github.sh | 2 + sdk/build.sh | 1 + sdk/config/ccmp15-dvk/bblayers.conf.sample | 23 ++ sdk/config/ccmp15-dvk/conf-notes.txt | 23 ++ sdk/config/ccmp15-dvk/local.conf.sample | 292 +++++++++++++++++++++ 6 files changed, 435 insertions(+) create mode 100644 meta-digi-arm/conf/machine/ccmp15-dvk.conf create mode 100644 sdk/config/ccmp15-dvk/bblayers.conf.sample create mode 100644 sdk/config/ccmp15-dvk/conf-notes.txt create mode 100644 sdk/config/ccmp15-dvk/local.conf.sample diff --git a/meta-digi-arm/conf/machine/ccmp15-dvk.conf b/meta-digi-arm/conf/machine/ccmp15-dvk.conf new file mode 100644 index 000000000..43b5b7d99 --- /dev/null +++ b/meta-digi-arm/conf/machine/ccmp15-dvk.conf @@ -0,0 +1,94 @@ +#@TYPE: Machine +#@NAME: ccmp15-dvk +#@DESCRIPTION: Configuration for Digi ConnectCore MP15 DVK +#@NEEDED_BSPLAYERS: layers/meta-digi + +include conf/machine/include/st-machine-common-stm32mp.inc +include conf/machine/include/tune-cortexa7.inc +include conf/machine/include/digi-defaults.inc + +# ========================================================================= +# Chip architecture +# ========================================================================= +DEFAULTTUNE = "cortexa7thf-neon-vfpv4" +MACHINEOVERRIDES = "arm:armv7ve:stcommon:stm32mpcommon:ccmp1:ccmp15:ccmp15-dvk" + +# ========================================================================= +# U-Boot configs +# ========================================================================= +UBOOT_CONFIG = "ccmp15_trusted_defconfig,,u-boot-dtb.${UBOOT_SUFFIX}" + +# ========================================================================= +# Machine settings +# ========================================================================= +# Define list of devicetree per board + +# Extra DTB for board - need to specify it with .dtb ... +STM32MP_KERNEL_DEVICETREE_ccmp15-dvk += "ccmp157-dvk.dtb" +STM32MP_KERNEL_DEVICETREE_ccmp15-dvk += "ccmp151-dvk.dtb" + +# ========================================================================= +# Machine features +# ========================================================================= +MACHINE_FEATURES += "bluetooth" +MACHINE_FEATURES += "wifi" +MACHINE_FEATURES += "gpu" +MACHINE_FEATURES += "mca" + +# ========================================================================= +# Image +# ========================================================================= +# Add ubi FSTYPES to default ones for nand volumes +IMAGE_FSTYPES += "stmultiubi" + +# ========================================================================= +# flashlayout +# ========================================================================= +# Define the config labels to use to generate flashlayout file + +# ========================================================================= +# extlinux configuration +# ========================================================================= +# As example, modify the default boot config for each target to M4 config + +# ========================================================================= +# Trusted firmware debug +# ========================================================================= +TF_DEBUG ?= "0" + +# ========================================================================= +# Flashlayouts +# ========================================================================= + +# ========================================================================= +# Kernel +# ========================================================================= +KERNEL_DEFCONFIG ?= "ccmp15_defconfig" +ST_KERNEL_LOADADDR ?= "0xC0008000" + +# ========================================================================= +# DEY settings +# ========================================================================= +IMAGE_CLASSES = "image_types_digi image_types-stubi" + +# U-Boot environment offset (within partition) +UBOOT_ENV_OFFSET ?= "0x0" +# U-Boot environment size +UBOOT_ENV_SIZE ?= "0x20000" +# U-Boot environment range: size (in hex) in the environment partition that +# the U-Boot environment can take up (if undefined, it will take up all the +# available space in the environment partition) +UBOOT_ENV_RANGE ?= "" + +STORAGE_MEDIA = "mtd" + +# Enable STM specific features +DEY_BUILD_PLATFORM = "STM" + +# Wireless external module +HAS_WIFI_VIRTWLANS = "true" + +# ========================================================================= +# alsa +# ========================================================================= +ALSA_LIST = "" diff --git a/sdk/build-github.sh b/sdk/build-github.sh index 8da11cfc8..7dc7530be 100755 --- a/sdk/build-github.sh +++ b/sdk/build-github.sh @@ -32,6 +32,7 @@ AVAILABLE_PLATFORMS=" \ ccimx6sbc \ ccimx6ulsbc \ ccimx6ulstarter \ + ccmp15-dvk \ " MANIFEST_URL="https://github.com/digi-embedded/dey-manifest.git" @@ -147,6 +148,7 @@ done<<-_EOF_ ccimx6sbc dey-image-qt ccimx6ulsbc dey-image-qt ccimx6ulstarter core-image-base + ccmp15-dvk dey-image-qt _EOF_ YOCTO_IMGS_DIR="${WORKSPACE}/images" diff --git a/sdk/build.sh b/sdk/build.sh index f9d5703e8..0e0998ad3 100755 --- a/sdk/build.sh +++ b/sdk/build.sh @@ -182,6 +182,7 @@ done<<-_EOF_ ccimx6ulstarter DONTBUILDVARIANTS core-image-base,dey-image-aws ccimx6ulsom DONTBUILDVARIANTS dey-image-mft-module-min ccimx6ulrftest DONTBUILDVARIANTS dey-image-mft-module-rf + ccmp15-dvk DONTBUILDVARIANTS dey-image-qt,dey-image-aws _EOF_ YOCTO_IMGS_DIR="${WORKSPACE}/images" diff --git a/sdk/config/ccmp15-dvk/bblayers.conf.sample b/sdk/config/ccmp15-dvk/bblayers.conf.sample new file mode 100644 index 000000000..b82e23ba7 --- /dev/null +++ b/sdk/config/ccmp15-dvk/bblayers.conf.sample @@ -0,0 +1,23 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-poky \ + ##OEROOT##/meta-yocto-bsp \ + ##DIGIBASE##/meta-openembedded/meta-oe \ + ##DIGIBASE##/meta-openembedded/meta-python \ + ##DIGIBASE##/meta-openembedded/meta-networking \ + ##DIGIBASE##/meta-openembedded/meta-webserver \ + ##DIGIBASE##/meta-qt5 \ + ##DIGIBASE##/meta-swupdate \ + ##DIGIBASE##/meta-timesys \ + ##DIGIBASE##/meta-st-stm32mp \ + ##DIGIBASE##/meta-python2 \ + ##DIGIBASE##/meta-digi/meta-digi-arm \ + ##DIGIBASE##/meta-digi/meta-digi-dey \ + " diff --git a/sdk/config/ccmp15-dvk/conf-notes.txt b/sdk/config/ccmp15-dvk/conf-notes.txt new file mode 100644 index 000000000..027ac1216 --- /dev/null +++ b/sdk/config/ccmp15-dvk/conf-notes.txt @@ -0,0 +1,23 @@ +Digi Embedded Yocto provides the following image recipes: + + * dey-image-qt: graphical QT image + + By default the image is X11-based so it provides a full SATO theme + desktop environment. + + To compile the image for the framebuffer (instead of X11) add the + following line to the project's conf/local.conf: + + DISTRO_FEATURES_remove = "x11" + + * core-image-base: a console-only image + + Expansion of native core-image-base by including all the support for the + target device hardware like firmware files, rootfs customizations, etc. + + * dey-image-aws: console-only image supporting Amazon Web Services IoT + + This image includes the AWS Greengrass Core and an AWS IoT platform + example application. For more information on AWS support in Digi + Embedded Yocto see the online documentation. + diff --git a/sdk/config/ccmp15-dvk/local.conf.sample b/sdk/config/ccmp15-dvk/local.conf.sample new file mode 100644 index 000000000..a02c0ea65 --- /dev/null +++ b/sdk/config/ccmp15-dvk/local.conf.sample @@ -0,0 +1,292 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone-yocto" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86-64 if no other machine is selected: +#MACHINE ??= "qemux86-64" + +MACHINE = "ccmp15-dvk" + +# +# Use Digi's internal git repositories +# +#DIGI_INTERNAL_GIT ?= "1" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "dey" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_rpm" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +USER_CLASSES ?= "buildstats image-mklibs image-prelink" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necessary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS ??= "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" + +# +# Qemu configuration +# +# By default native qemu will build with a builtin VNC server where graphical output can be +# seen. The line below enables the SDL UI frontend too. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +# By default libsdl2-native will be built, if you want to use your host's libSDL instead of +# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +#ASSUME_PROVIDED += "libsdl2-native" + +# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds +# a handy set of menus for controlling the emulator. +#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" + +# +# Hash Equivalence +# +# Enable support for automatically running a local hash equivalence server and +# instruct bitbake to use a hash equivalence aware signature generator. Hash +# equivalence improves reuse of sstate by detecting when a given sstate +# artifact can be reused as equivalent, even if the current task hash doesn't +# match the one that generated the artifact. +# +# A shared hash equivalent server can be set with ":" format +# +#BB_HASHSERVE = "auto" +#BB_SIGNATURE_HANDLER = "OEEquivHash" + +# +# Memory Resident Bitbake +# +# Bitbake's server component can stay in memory after the UI for the current command +# has completed. This means subsequent commands can run faster since there is no need +# for bitbake to reload cache files and so on. Number is in seconds, after which the +# server will shut down. +# +#BB_SERVER_TIMEOUT = "60" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# +# Enable local PR server +# +PRSERV_HOST = "localhost:0" + +# Enable STM specific features +DEY_BUILD_PLAFORM = "STM"