kernel-module-atheros: generalize using platform family
https://jira.digi.com/browse/DEL-1105 Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit is contained in:
Javier Viguera
parent
1a54b81586
commit
eb5f07b154
|
|
@ -27,7 +27,7 @@ SRC_URI += " \
|
||||||
"
|
"
|
||||||
|
|
||||||
# MX6 wireless calibration file
|
# MX6 wireless calibration file
|
||||||
SRC_URI_append_mx6 = " file://Digi_6203-6233-US.bin"
|
SRC_URI_append_ccimx6 = " file://Digi_6203-6233-US.bin"
|
||||||
|
|
||||||
S = "${WORKDIR}/git"
|
S = "${WORKDIR}/git"
|
||||||
|
|
||||||
|
|
@ -37,7 +37,7 @@ do_configure_prepend() {
|
||||||
cp ${WORKDIR}/Makefile ${S}/
|
cp ${WORKDIR}/Makefile ${S}/
|
||||||
}
|
}
|
||||||
|
|
||||||
do_configure_prepend_mx6() {
|
do_configure_prepend_ccimx6() {
|
||||||
cp ${WORKDIR}/Digi_6203-6233-US.bin ${S}/Firmware_Package/target/AR6003/hw2.1.1/
|
cp ${WORKDIR}/Digi_6203-6233-US.bin ${S}/Firmware_Package/target/AR6003/hw2.1.1/
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
@ -58,4 +58,4 @@ FILES_${PN} += " \
|
||||||
"
|
"
|
||||||
|
|
||||||
PACKAGE_ARCH = "${MACHINE_ARCH}"
|
PACKAGE_ARCH = "${MACHINE_ARCH}"
|
||||||
COMPATIBLE_MACHINE = "(mxs|mx6)"
|
COMPATIBLE_MACHINE = "(ccardimx28|ccimx6)"
|
||||||
|
|
|
||||||
|
|
@ -1,102 +0,0 @@
|
||||||
#!/bin/sh
|
|
||||||
#===============================================================================
|
|
||||||
#
|
|
||||||
# 10-atheros_pre-up
|
|
||||||
#
|
|
||||||
# Copyright (C) 2012 by Digi International Inc.
|
|
||||||
# All rights reserved.
|
|
||||||
#
|
|
||||||
# This program is free software; you can redistribute it and/or modify it
|
|
||||||
# under the terms of the GNU General Public License version 2 as published by
|
|
||||||
# the Free Software Foundation.
|
|
||||||
#
|
|
||||||
#
|
|
||||||
# !Description: Load Atheros' wireless driver
|
|
||||||
#
|
|
||||||
#===============================================================================
|
|
||||||
|
|
||||||
set -e
|
|
||||||
|
|
||||||
[ "${IFACE}" != "wlan0" ] && exit 0
|
|
||||||
|
|
||||||
FIRMWARE_DIR="/lib/firmware/ath6k/AR6003/hw2.1.1"
|
|
||||||
|
|
||||||
#
|
|
||||||
# Get the wlan MAC address from kernel command line. Use a default
|
|
||||||
# value if the address has not been set.
|
|
||||||
#
|
|
||||||
if [ -f "/proc/device-tree/wireless/mac-address" ]; then
|
|
||||||
MAC_ADDR="$(hexdump -ve '1/1 "%02X" ":"' /proc/device-tree/wireless/mac-address | sed 's/:$//g')"
|
|
||||||
else
|
|
||||||
MAC_ADDR="$(sed -ne 's,^.*ethaddr2=\([^[:blank:]]\+\)[:blank:]*.*,\1,g;T;p' /proc/cmdline)"
|
|
||||||
fi
|
|
||||||
if [ -z "${MAC_ADDR}" -o "${MAC_ADDR}" = "00:00:00:00:00:00" ]; then
|
|
||||||
MAC_ADDR="00:04:F3:4C:B1:D3"
|
|
||||||
fi
|
|
||||||
|
|
||||||
# We need to write the WLAN MAC address to softmac in the ath6k firmware
|
|
||||||
# directory. However, we don't want to rewrite the file if it already exists
|
|
||||||
# and the address is the same because we don't want to wear out NAND flash.
|
|
||||||
#
|
|
||||||
# So create the file on the RAM DRIVE first and compare the two. Only update
|
|
||||||
# the copy on NAND if the address has changed.
|
|
||||||
#
|
|
||||||
mac1="$(echo ${MAC_ADDR} | cut -d':' -f1)"
|
|
||||||
mac2="$(echo ${MAC_ADDR} | cut -d':' -f2)"
|
|
||||||
mac3="$(echo ${MAC_ADDR} | cut -d':' -f3)"
|
|
||||||
mac4="$(echo ${MAC_ADDR} | cut -d':' -f4)"
|
|
||||||
mac5="$(echo ${MAC_ADDR} | cut -d':' -f5)"
|
|
||||||
mac6="$(echo ${MAC_ADDR} | cut -d':' -f6)"
|
|
||||||
|
|
||||||
TMP_MACFILE="$(mktemp -t softmac.XXXXXX)"
|
|
||||||
printf "\x${mac1}\x${mac2}\x${mac3}\x${mac4}\x${mac5}\x${mac6}" > ${TMP_MACFILE}
|
|
||||||
if ! cmp -s ${TMP_MACFILE} ${FIRMWARE_DIR}/softmac; then
|
|
||||||
cp ${TMP_MACFILE} ${FIRMWARE_DIR}/softmac
|
|
||||||
fi
|
|
||||||
rm -f ${TMP_MACFILE}
|
|
||||||
|
|
||||||
# Figure out which wireless region we are in. The US has rules for
|
|
||||||
# what channels can be used and at what power level. We use a different set of
|
|
||||||
# rules for the other regions in the world that we sell into. The mod_cert field
|
|
||||||
# in OTP will be set to 0x0 for the US. Once we know the region, make sure the
|
|
||||||
# appropriate calibration file is loaded.
|
|
||||||
#
|
|
||||||
MACHINE="$(cat /proc/device-tree/digi,machine,name 2>/dev/null || \
|
|
||||||
cat /sys/kernel/machine/name)"
|
|
||||||
REGION_CODE="$(cat /proc/device-tree/digi,hwid,cert 2>/dev/null || \
|
|
||||||
cat /sys/kernel/${MACHINE}/mod_cert)"
|
|
||||||
US_CODE="0x0"
|
|
||||||
BDATA_SOURCE="Digi_6203-6233-World.bin"
|
|
||||||
if [ -n "${REGION_CODE}" -a "${US_CODE}" = "${REGION_CODE}" ]; then
|
|
||||||
BDATA_SOURCE="Digi_6203-6233-US.bin"
|
|
||||||
logger -t atheros "Setting US wireless region."
|
|
||||||
else
|
|
||||||
logger -t atheros "Setting non-US (world) wireless region."
|
|
||||||
fi
|
|
||||||
|
|
||||||
# We don't want to rewrite NAND every time we boot so only
|
|
||||||
# change the link if it is wrong.
|
|
||||||
BDATA_LINK="${FIRMWARE_DIR}/bdata.bin"
|
|
||||||
if [ ! -e "${BDATA_LINK}" ] || ! cmp -s "${BDATA_LINK}" "${FIRMWARE_DIR}/${BDATA_SOURCE}"; then
|
|
||||||
ln -sf "${BDATA_SOURCE}" "${BDATA_LINK}"
|
|
||||||
fi
|
|
||||||
|
|
||||||
# Load 'cfg80211' and let it settle down (needed by 'ath6kl_sdio')
|
|
||||||
modprobe -q cfg80211 && sleep 0.2
|
|
||||||
|
|
||||||
# ath6kl_sdio.ko
|
|
||||||
if ! grep -qs ath6kl_sdio /proc/modules; then
|
|
||||||
RETRIES="5"
|
|
||||||
while [ "${RETRIES}" -gt "0" ]; do
|
|
||||||
modprobe --ignore-install -q ath6kl_sdio || true
|
|
||||||
[ -d "/sys/class/net/wlan0" ] && break
|
|
||||||
RETRIES="$((RETRIES - 1))"
|
|
||||||
rmmod ath6kl_sdio > /dev/null
|
|
||||||
echo "Retrying to load wireless"
|
|
||||||
sleep 2
|
|
||||||
done
|
|
||||||
[ "${RETRIES}" -eq "0" ] && echo "Loading ath6kl_sdio module: [FAILED]"
|
|
||||||
fi
|
|
||||||
|
|
||||||
# Delay required for the interface 'wlan0' to settle down before trying to configure it.
|
|
||||||
sleep 0.5
|
|
||||||
Binary file not shown.
|
|
@ -1,102 +0,0 @@
|
||||||
#!/bin/sh
|
|
||||||
#===============================================================================
|
|
||||||
#
|
|
||||||
# 10-atheros_pre-up
|
|
||||||
#
|
|
||||||
# Copyright (C) 2012 by Digi International Inc.
|
|
||||||
# All rights reserved.
|
|
||||||
#
|
|
||||||
# This program is free software; you can redistribute it and/or modify it
|
|
||||||
# under the terms of the GNU General Public License version 2 as published by
|
|
||||||
# the Free Software Foundation.
|
|
||||||
#
|
|
||||||
#
|
|
||||||
# !Description: Load Atheros' wireless driver
|
|
||||||
#
|
|
||||||
#===============================================================================
|
|
||||||
|
|
||||||
set -e
|
|
||||||
|
|
||||||
[ "${IFACE}" != "wlan0" ] && exit 0
|
|
||||||
|
|
||||||
FIRMWARE_DIR="/lib/firmware/ath6k/AR6003/hw2.1.1"
|
|
||||||
|
|
||||||
#
|
|
||||||
# Get the wlan MAC address from kernel command line. Use a default
|
|
||||||
# value if the address has not been set.
|
|
||||||
#
|
|
||||||
if [ -f "/proc/device-tree/wireless/mac-address" ]; then
|
|
||||||
MAC_ADDR="$(hexdump -ve '1/1 "%02X" ":"' /proc/device-tree/wireless/mac-address | sed 's/:$//g')"
|
|
||||||
else
|
|
||||||
MAC_ADDR="$(sed -ne 's,^.*ethaddr2=\([^[:blank:]]\+\)[:blank:]*.*,\1,g;T;p' /proc/cmdline)"
|
|
||||||
fi
|
|
||||||
if [ -z "${MAC_ADDR}" -o "${MAC_ADDR}" = "00:00:00:00:00:00" ]; then
|
|
||||||
MAC_ADDR="00:04:F3:4C:B1:D3"
|
|
||||||
fi
|
|
||||||
|
|
||||||
# We need to write the WLAN MAC address to softmac in the ath6k firmware
|
|
||||||
# directory. However, we don't want to rewrite the file if it already exists
|
|
||||||
# and the address is the same because we don't want to wear out NAND flash.
|
|
||||||
#
|
|
||||||
# So create the file on the RAM DRIVE first and compare the two. Only update
|
|
||||||
# the copy on NAND if the address has changed.
|
|
||||||
#
|
|
||||||
mac1="$(echo ${MAC_ADDR} | cut -d':' -f1)"
|
|
||||||
mac2="$(echo ${MAC_ADDR} | cut -d':' -f2)"
|
|
||||||
mac3="$(echo ${MAC_ADDR} | cut -d':' -f3)"
|
|
||||||
mac4="$(echo ${MAC_ADDR} | cut -d':' -f4)"
|
|
||||||
mac5="$(echo ${MAC_ADDR} | cut -d':' -f5)"
|
|
||||||
mac6="$(echo ${MAC_ADDR} | cut -d':' -f6)"
|
|
||||||
|
|
||||||
TMP_MACFILE="$(mktemp -t softmac.XXXXXX)"
|
|
||||||
printf "\x${mac1}\x${mac2}\x${mac3}\x${mac4}\x${mac5}\x${mac6}" > ${TMP_MACFILE}
|
|
||||||
if ! cmp -s ${TMP_MACFILE} ${FIRMWARE_DIR}/softmac; then
|
|
||||||
cp ${TMP_MACFILE} ${FIRMWARE_DIR}/softmac
|
|
||||||
fi
|
|
||||||
rm -f ${TMP_MACFILE}
|
|
||||||
|
|
||||||
# Figure out which wireless region we are in. The US has rules for
|
|
||||||
# what channels can be used and at what power level. We use a different set of
|
|
||||||
# rules for the other regions in the world that we sell into. The mod_cert field
|
|
||||||
# in OTP will be set to 0x0 for the US. Once we know the region, make sure the
|
|
||||||
# appropriate calibration file is loaded.
|
|
||||||
#
|
|
||||||
MACHINE="$(cat /proc/device-tree/digi,machine,name 2>/dev/null || \
|
|
||||||
cat /sys/kernel/machine/name)"
|
|
||||||
REGION_CODE="$(cat /proc/device-tree/digi,hwid,cert 2>/dev/null || \
|
|
||||||
cat /sys/kernel/${MACHINE}/mod_cert)"
|
|
||||||
US_CODE="0x0"
|
|
||||||
BDATA_SOURCE="Digi_6203-6233-World.bin"
|
|
||||||
if [ -n "${REGION_CODE}" -a "${US_CODE}" = "${REGION_CODE}" ]; then
|
|
||||||
BDATA_SOURCE="Digi_6203-6233-US.bin"
|
|
||||||
logger -t atheros "Setting US wireless region."
|
|
||||||
else
|
|
||||||
logger -t atheros "Setting non-US (world) wireless region."
|
|
||||||
fi
|
|
||||||
|
|
||||||
# We don't want to rewrite NAND every time we boot so only
|
|
||||||
# change the link if it is wrong.
|
|
||||||
BDATA_LINK="${FIRMWARE_DIR}/bdata.bin"
|
|
||||||
if [ ! -e "${BDATA_LINK}" ] || ! cmp -s "${BDATA_LINK}" "${FIRMWARE_DIR}/${BDATA_SOURCE}"; then
|
|
||||||
ln -sf "${BDATA_SOURCE}" "${BDATA_LINK}"
|
|
||||||
fi
|
|
||||||
|
|
||||||
# Load 'cfg80211' and let it settle down (needed by 'ath6kl_sdio')
|
|
||||||
modprobe -q cfg80211 && sleep 0.2
|
|
||||||
|
|
||||||
# ath6kl_sdio.ko
|
|
||||||
if ! grep -qs ath6kl_sdio /proc/modules; then
|
|
||||||
RETRIES="5"
|
|
||||||
while [ "${RETRIES}" -gt "0" ]; do
|
|
||||||
modprobe --ignore-install -q ath6kl_sdio || true
|
|
||||||
[ -d "/sys/class/net/wlan0" ] && break
|
|
||||||
RETRIES="$((RETRIES - 1))"
|
|
||||||
rmmod ath6kl_sdio > /dev/null
|
|
||||||
echo "Retrying to load wireless"
|
|
||||||
sleep 2
|
|
||||||
done
|
|
||||||
[ "${RETRIES}" -eq "0" ] && echo "Loading ath6kl_sdio module: [FAILED]"
|
|
||||||
fi
|
|
||||||
|
|
||||||
# Delay required for the interface 'wlan0' to settle down before trying to configure it.
|
|
||||||
sleep 0.5
|
|
||||||
Loading…
Reference in New Issue