In 92c49b9b1a16dfd35444db8143bd4cae4cda70cc was introduced the LAYERSERIES_CORENAMES
and LAYERSERIES_COMPAT_<layername> with the intention of allowing layers
to indicate which versions of the core project they're compatible with.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Digi Embedded Yocto 2.4-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
qt3d sometimes fails to build due to an upstream issue that has yet to be
resolved. Since this interferes with our daily builds from time to time, remove
qt3d from our images completely.
https://jira.digi.com/browse/DEL-6348
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
SOM v1 is not going to be released, so there's no need for a revision check.
Now that hw flow control is available, use it along with the highest baudrate
possible.
This reverts commit e4fbba3dde.
https://jira.digi.com/browse/DEL-6254
Our current OpenSSL libraries are only functional when applications link
against v1.0.2d or higher, making some packages containing pre-compiled
applications that link to older versions (like AWS Greengrass) fail to build
and/or run properly.
This commit includes:
* Changing SHLIB_EXT from so.1.0.2 to so.1.0.0
* Reverting the version-script to an older version with backwards
compatibility plus newer symbols
Specifically, these changes partially revert the patches added in the poky
layer's commits a59bfd05d15085a3dc5669b47fd19867246c846b and
73a43fc15e0463c39baaadecab78fb3ef51b8cd0 respectively.
Please note that this only modifies the cryptographic library's ABI, its code
remains unchanged.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The PWM and ADC values are still to be determined, since their BSP support is
currently unavailable.
https://jira.digi.com/browse/DEL-6205
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Initialize Bluetooth chip in HCI_H4 mode and provide a firmware binary
with the IBS and DEEP_SLEEP mode disabled by default. Also this firmware
enables an internal clock required to maintain the system on low power modes.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Digi vendor kernel uses a dedicated HCI UART driver with support for
In-Band Sleep (IBS). This driver, when used with a QCA vendor ROME plugin
for hciattach, is able to upload a new firmware version to the Bluetooth
chipset, as well as set the MAC address directly on the firmware.
Mainline BSP uses the HCI H4 driver instead and the "qualcomm" hciattach
plugin which is not able to upload firmware to the QCA6564 chipset.
As such, when using mainline the chipset uses the ROM firmware and the
bluetooth init script has been adapted accordingly.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The meta-freescale layer assumes that when you define the use-mainline-bsp
the platform is going to use the etnaviv gpu driver. This is not the case
for the CC6UL as the mxsfb.c driver is still not DRM capable.
Probably this will change in v4.19 as there is a DRM capable mxsfb.c
driver that will make it possible to use the armada xf86 driver with the
etnaviv fbdev emulation.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
* Check for file before using it
This just avoids the failure, on mainline access to OTP would need to be
done differently, see:
https://jira.digi.com/browse/ACL-163
* Use compatible node instead of digi,machine,name
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 4d35d15fee)
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
During the merge of the maintainance branch and the manual revert of
some recipes, these were forgotten.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The generate_installer_zip() function had a hardcoded "u-boot" filename when adding
the bootloader to the list of files that are put in the installer .zip.
https://jira.digi.com/browse/DEL-6174
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Set a lower baudrate of 115200bps for bluetooth on SOMv1 since
hardware flow control is not available.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Arturo Buzarra
Gabriel Valcazar
Mike Engel
fgilmar
Hector Palacios
Gonzalo Ruiz
Alex Gonzalez
Jose Diaz de Grenu