This commit synchronizes the nl80211 definitions with Linux kernel v6.6.48 to
prevent a mismatch between the extended features recognized by wpa_supplicant
and to correctly parse the information provided by the Linux driver.
https://onedigi.atlassian.net/browse/DEL-9470
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Our distribution is Digi Embedded Yocto (DEY), so use that to mark the
upstream status of the patches in our layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
A recent change in poky changed the configuration behavior of this package,
using the defconfig in the source tree instead of the one provided in Yocto
(which we overwrite in meta-digi). Since our ccmp1 builds have a lot of patches
specific to the platforms' wifi chip, using the default defconfig results in
linking errors.
Restore the ability to use custom defconfigs to be able to use the ones defined
in our layer per platform.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates the wpa-supplicant and hostapd recipes to apply the Murata
release patch series for ConnectCore MP2 platform.
https://onedigi.atlassian.net/browse/DEL-9237
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some wifi-related functionality was enabled on ccimx93 overrides. The
ccimx91 also needs this functionality but it was not being applied as
the overrides were only for ccimx93.
Generalize the overrides for ccimx9.
https://onedigi.atlassian.net/browse/DEL-9214
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the required firmware binaries for Bluetooth and Wireless
interfaces, hostapd and wpa_supplicant recipes based on the Cypress Linux WiFi
Driver (FMAC) release v5.15.58-2023_1128 (Wireless firmware v13.10.246.334).
This change also includes a custom defconfig file for the hostapd and
wpa_supplicant recipes including the changes from the patches and the Digi
customizations.
Also are updated the Murata firmware repositories to match with the latest
Murata release imx-kirkstone-hedorah_r1.0, which is based in the same Cypress
Linux Wifi Driver release v5.15.58-2023_1128.
https://onedigi.atlassian.net/browse/DEL-8667
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The enabled options are mainly for AP mode, which improve the P2P
performance when the P2P node behaves as an AP, it is, as P2P GO.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit updates the patch series for wpa-supplicant and hostapd v2.10,
based on the Murata release imx-kirkstone-fafnir_r1.0 that matches with the
Cypress Linux WiFi Driver (FMAC) release v5.15.58-2023_0222
https://onedigi.atlassian.net/browse/DEL-8407
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates by default support to WPA3-Enterprise modes
128-bits (WPA-EAP-SUITE-B) and 192-bits (WPA-EAP-SUITE-B-192)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Mainly, refresh patches so they apply on top of wpa-supplicant 2.10
Murata patches from release: cypress-fmac-v5.10.9-2022_0331
NOTE: the wpa-supplicant patches in the cypress release apply on top of
1759a8e3f36a commit of the hostapd.git repository. That repository
includes both the wpa-supplicant and the hostapd packages code. In Yocto
the wpa-supplicant recipe uses the release tarball, so there is no
'hostapd' folder included. Thus, the cypress patches that changed code
in 'hostapd' and 'wpa_supplicant' folders, have been splitted in two
(the hostapd changes and the rest). In the recipe the patches that
changed 'hostapd' code have been marked as 'apply=no' because they won't
apply to the tarball, but they have not been deleted for traceability.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This patch series is based on the support software package
"Infineon-cypress-fmac-v5.4.18-2021_0527" which is the latest based on
Hostap v2.9.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some packages require different scripts, configuration files or installations
depending on the wireless chip assembled on the target. In general, the way
to support both chips in one image is to have the recipes install both
versions of the aforementioned files, then leave only the strictly necessary
version once the wireless chip can be deduced.
In the case of the init-ifupdown recipe, this involves installing temporary
configuration fragments that are later erased. In the case of the standby
script, the logic can be implemented in a single file.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Include by default support to Simultaneous Authentication of Equals (SAE) and
the standard IEEE 802.11w to Protected Management Frames, both required to
support the standard WPA3.
https://jira.digi.com/browse/DEL-7301
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates support for the IEEE 802.11r protocol to operate with
fast roaming networks.
https://jira.digi.com/browse/CC6UL-1110
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
WPA and P2P configuration files are basically the same between all
platforms, so we remove all duplicated files to use a common file
and modify it in the recipe logic.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This parameter allows to set the time interval for scheduled scans in
seconds. This is usually managed by the wpa-supplicant dynamically, but
for example with DFS channels and non broadcasting SSIDs re-associations
take too long if the periodic scans time interval is not reduced.
https://jira.digi.com/browse/CC6UL-594
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
We need a different configuration file, because the SoftAP functionality is
supported using the hostapd package instead of the wpa_supplicant.
https://jira.digi.com/browse/DEL-2744
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the patch because it's now included in wpa_supplicant v2.3
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the machine specific files for the ccimx6adpt platform. Initially
they are copied form the ccardimx28js as it is also planned to use
an Atheros chipset.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
wpa_supplicant v2.0 was not available in Danny so we needed the whole
recipe, but it was updated in Dylan, so now we just need the bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The final product will be called "Digi Embedded for Yocto" or DEY for
short.
This commit renames all relevant files.
https://jira.digi.com/browse/DEL-474
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Arturo Buzarra
Javier Viguera
Gabriel Valcazar
Isaac Hermida
Mike Engel
Jose Diaz de Grenu
Alex Gonzalez