GPIO1 port access was not enabled on ATF because NXP
reserved it to have exclusive access from the secure
world on their EVK.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9839
The Digi commits on the imx-atf repository are now part of the
same branch and apply on top of each other since they do not
collide with each other.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* Set the OP-TEE base address to 0x7e000000 (32MiB below the first gigabyte
of DDR).
* Update the ATF and OP-TEE memory maps to support up to 4GiB DDR.
This ensures OP-TEE runs reliably across all ccimx8mm memory configurations.
https://onedigi.atlassian.net/browse/DEL-9502
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Our distribution is Digi Embedded Yocto (DEY), so use that to mark the
upstream status of the patches in our layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Back in Yocto 4.0, we applied some imx recipe changes exclusively for the
ccimx93 from meta-imx's rel_imx_6.1.55_2.2.0 tag, but now these changes have
been upstreamed in the meta-freescale scarthgap branch. Since there currently
isn't an NXP BSP based on scarthgap, make all platforms use the upstreamed
versions of the recipes, which are the same versions or newer as the ones
available in meta-imx
Remove the recipes for:
* firmware-ele-imx
* gstreamer1.0-plugins-bad
* gstreamer1.0-plugins-base
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-ugly
* gstreamer1.0
* imx-atf
* imx-boot-firmware-files
* imx-codec
* imx-g2d-samples
* imx-m33-demos
* imx-m4-demos
* imx-m7-demos
* imx-parser
* imx-pxp-g2d
* libdrm
* linux-imx-headers
* optee-test
* wayland
* wayland-protocols
* weston
* xwayland
Apply these changes:
* Remove ccimx93-exclusive changes in gstreamer1.0-meta-base
* Modify imx-gst1.0-plugin bbappend so the upstream version is used in all
platforms
* Remove imx-alsa-plugins bbappend so the upstream version is used in all
platforms
* Remove firmware-nxp-wifi bbappend since the files we need to install seem
to already be included in the meta-freescale recipe
* Remove imx-test and imx-lib bbappends since our custom changes have
already been included in the meta-freescale recipes
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
New NXP's release is based on upstream v2.8. Use this only for ccimx93,
and keep using the previous Kirkstone release (based on upstream v2.6)
for the rest of the platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
New NXP's release is based on upstream v2.8. Use this only for ccimx93,
and keep using the previous Kirkstone release (based on upstream v2.6)
for the rest of the platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove patch file "0001-Makefile-Suppress-array-bounds-error.patch"
for ccimx93, as it is already included in the lf-6.1.1_1.0.0 revision.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-freescale started updating the recipes to NXP's
rel_imx_5.15.71_2.2.0 release, so now we have a bunch of overlayed
recipes we can clean up.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also:
* Support ccimx93
* Add all the patches regardless of the platform (remove overrides). The
patches do not clash, so adding all of them eases the maintanance and
the migration to new versions of the imx-atf.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Gonzalo Ruiz
Javier Viguera
Hector Palacios
Gabriel Valcazar
Mike Engel
Isaac Hermida