This commit adds some basic TSN support to DEY.
It includes the kernel configuration fragment with
the IEEE 802.1 support and the some user space tools
necessary to configure the network.
https://onedigi.atlassian.net/browse/DEL-9026
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit updates the required firmware binaries for Bluetooth and Wireless
interfaces, hostapd and wpa_supplicant recipes based on the Cypress Linux WiFi
Driver (FMAC) release v5.15.58-2023_1128 (Wireless firmware v13.10.246.334).
This change also includes a custom defconfig file for the hostapd and
wpa_supplicant recipes including the changes from the patches and the Digi
customizations.
Also are updated the Murata firmware repositories to match with the latest
Murata release imx-kirkstone-hedorah_r1.0, which is based in the same Cypress
Linux Wifi Driver release v5.15.58-2023_1128.
https://onedigi.atlassian.net/browse/DEL-8667
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This reverts commit c5b53c9765.
The HCI reset interface is fixed inside each BT power calibration shell
script, so this workaround is not needed anymore.
https://onedigi.atlassian.net/browse/DEL-8458
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
for the IW61x, when the FW is instructed with an hci reset command, the
LE stack is not correctly reset.
It can be workaround-ed by SW doing a SW power cycle.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The P2P interface may have a different name, for instance, in the ccimx93 it
is wfd (wifi direct).
Generalize Digi P2P scripts to use the name from the platform config file.
https://onedigi.atlassian.net/browse/DEL-8468
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The btnxpuart driver uses internally the serial port to manage the chip, and
loads the BT FW independently of the WiFi subsystem.
While on it, add support in the bluetooth-init script to be able to power the
chip when the WiFi support is not present.
https://onedigi.atlassian.net/browse/DEL-8632
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Ensure we leave the Bluetooth interface up after attaching it. If not,
under some circumstances, it could be down.
https://onedigi.atlassian.net/browse/DEL-8608
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Certain platforms share a processor family but need to be differentiated
between them. DEY was using the variable DIGI_FAMILY as the SOM name
rather than the family. It becomes useful to have both (DIGI_SOM as the
more specific, and DIGI_FAMILY as the more generic).
This is the case, for example, of:
- ccmp1 (family)
- ccmp15 (SOM)
- ccmp13 (SOM)
- ccimx8m (family)
- ccimx8mm (SOM)
- ccimx8mn (SOM)
Both variables are used on the machine overrides.
Where DIGI_FAMILY was used, use now DIGI_SOM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Masking the extended advertising flag makes the hcitool lescan work, but
triggers functionality problem such as bluetoothctl scanning or extended
advertisement not working.
Do not mask it, so use bluetoothctl scan instead of hcitool lescan to discover
LE devices.
This reverts commit ac1e4633fb.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The BT chip for the ccimx93 cannot be turned off, nor can it be re-uploaded.
Therefore, we need to set some conditions to assume that it is going to be
attached correctly. The changes in this script take care of that.
Upon the first attachment, the rate is set to 3M, and future uses will always
be done at this rate. If, for any reason, it was not stopped and the chip is
already attached, do nothing.
https://onedigi.atlassian.net/browse/DEL-8464
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This fix is needed for bluez-5.65 version.
We can drop it when using a newer version.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The enabled options are mainly for AP mode, which improve the P2P
performance when the P2P node behaves as an AP, it is, as P2P GO.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Use the specific hcitool vendor command to set the BT mac address.
It is a custom vendor command (0x3f), and the field is 0x0022.
The BT address is passed from last octet to first octet.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Sync the defconfig to version 2.10.
Additionally, add support for new features, such as:
* ACS (auto channel selection)
* 802.11AX (Wi-Fi 6)
* SAE (WPA3 Personal)
* SUITEB192 (WPA3 Enterprise 192 bits)
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The bluetooth FW for the IW612 is loaded together with WiFi FW, so there
is not BT FW file as in our other products.
In order to use the BT, it is a requirement to load the WiFi FW, so
ensure that the service is started after the load of the system
modules.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit updates the patch series for wpa-supplicant and hostapd v2.10,
based on the Murata release imx-kirkstone-fafnir_r1.0 that matches with the
Cypress Linux WiFi Driver (FMAC) release v5.15.58-2023_0222
https://onedigi.atlassian.net/browse/DEL-8407
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
ConnectCore 93 DVK only connects the XBee reset line (XBEE_RESET_N_GPIO) but not
the sleep request (XBEE_SLEEP_RQ_GPIO)
It also reworks the 'xbee-init' script to support empty reset
(XBEE_RESET_N_GPIO) or sleep request (XBEE_SLEEP_RQ_GPIO) values.
https://onedigi.atlassian.net/browse/DEL-8375
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Packages bluez5-init, cloudconnector, and connectcore-demo-example-webkit
provide a launcher script that is used regardless of the init system being
systemd or sysvinit. Those launcher scripts use the '/etc/init.d/functions'
file, which is provided by the 'initscripts-functions' runtime package,
so add that runtime dependence.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 'ifupdown' script does not allow to disconnect a network interface on
purpose. Once it is down, the script will reconnect it again.
This commit adds a configuration section inside 'NetworkManager.conf' to be able
to manage this behavior. By default, it is disabled.
https://onedigi.atlassian.net/browse/DEL-8342
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Starting at Bluez 5.48, the battery characteristic was moved to the
DBUS org.bluez.Battery1 interface. This causes the device to try to
read information from iOS devices after establishing a connection,
triggering a reverse pairing request. This scenario causes random
disconnects in iOS devices unless a trust agent is registered in the
host to take care of the pairing. Removing the battery plugin at
startup fixes the issue.
Signed-off-by: David Escalona <david.escalona@digi.com>
All files go to xbee-init package, so by default xbee package is not
created. This leads to a failure when building the SDK:
Error:
Problem: conflicting requests
- nothing provides xbee = 1.0-r0.0 needed by xbee-dev-1.0-r0.0.ccimx8mm_dvk
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes the Ethernet entries to prevent ModemManager from trying to
manage it:
ModemManager[177]: <info> [base-manager] couldn't check support for device
'/sys/devices/platform/soc/5800a000.eth1': not supported by any plugin
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
NetworkManager package moved from autotools to meson build system, so
some of the configs we added in the bbappend do not apply anymore.
Remove dead code and clean up the bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need to relax what ciphers are allowed with openssl-3.0 so that we do
not break Digi/RM. See DAL commit ec586a621c24f840ac7cc4f91241c55581698ba3
https://onedigi.atlassian.net/browse/DEL-7999
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
When building an SDK (with populate_sdk), all '-dev' packages are
installed. And empty 'openssh-dev' package would pull in 'openssh-sshd'
package even if our image is only depending on 'openssh-sftp'.
This causes a conflict with 'dropbear' server, which is only using
openssh-sftp.
Fix:
Problem: package dropbear-dev-2020.81-r0.4.cortexa7t2hf_neon requires dropbear = 2020.81-r0.4, but none of the providers can be installed
- package dropbear-2020.81-r0.4.cortexa7t2hf_neon conflicts with openssh provided by openssh-8.9p1-r0.7.cortexa7t2hf_neon
- package openssh-8.9p1-r0.7.cortexa7t2hf_neon conflicts with dropbear provided by dropbear-2020.81-r0.4.cortexa7t2hf_neon
- package openssh-dev-8.9p1-r0.7.cortexa7t2hf_neon requires openssh = 8.9p1-r0.7, but none of the providers can be installed
- conflicting requests
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit integrates by default support to WPA3-Enterprise modes
128-bits (WPA-EAP-SUITE-B) and 192-bits (WPA-EAP-SUITE-B-192)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Those variables are used to hold integer data parsed from bluetooth
config file. The parsing function "get_value_from_config" returns an INT,
so the variables cannot be unsigned.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove deprecated versions of recipes updated in other general layers
(poky, meta-openembedded). Also remove duplicated IMX specific recipes that
are available in other BSP layers (meta-freescale, meta-fsl-demos, etc).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Mainly, refresh patches so they apply on top of wpa-supplicant 2.10
Murata patches from release: cypress-fmac-v5.10.9-2022_0331
NOTE: the wpa-supplicant patches in the cypress release apply on top of
1759a8e3f36a commit of the hostapd.git repository. That repository
includes both the wpa-supplicant and the hostapd packages code. In Yocto
the wpa-supplicant recipe uses the release tarball, so there is no
'hostapd' folder included. Thus, the cypress patches that changed code
in 'hostapd' and 'wpa_supplicant' folders, have been splitted in two
(the hostapd changes and the rest). In the recipe the patches that
changed 'hostapd' code have been marked as 'apply=no' because they won't
apply to the tarball, but they have not been deleted for traceability.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Refresh the 5.56 patches on top of new version 5.64
* Separate the patches for 5.41 and 5.64. The code base has changed a
lot between those two releases, so having common patch files under
'bluez5' directory makes maintenance more cumbersome.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Isaac Hermida
Mike Engel
Arturo Buzarra
Javier Viguera
Hector Palacios
Tatiana Leon
David Escalona