On NXP platforms, the signed/encrypted bootloader images are not
included on the installer ZIP. This prevents from using the installer
when TrustFence is enabled.
This commit adds to the installer:
- If encryption is enabled
- encrypted bootloader
- signed bootloader (for USB recovery boot)
- If encryption is disabled
- signed bootloader
- If TrustFence is disabled
- non-signed bootloader
It also treats the ccimx6ul special, as this has a dedicated file for
USB recovery boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9698
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The class 'boot-artifacts.bbclass' was created to generate a
list of the bootable artifacts that must be copied from the
deploy dir to the installer ZIP file, so that the installer
has all the possible bootloader files to update any variant
of the hardware.
The class was somewhat over-engineered to produce the list,
specially for the cc8x, with the variants of SoC revision,
RAM size and width. With the arrival of ST family, it got
more complex, as the artifacts don't even come from U-Boot
recipe.
To remove complexity, this commit removes the bbclass and
moves the list to the platform config file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The ccmp1 build generates ubifs images for the NAND on the device and vfat and
ext4 images for the SD card. This commit reuses the already implemented
mechanism to match only ubifs images for the ccmp1 platforms.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The new DVKs of the cc8mn, cc8mm and ccmp1 have a new ftdi
usb to serial chip that is recognized as a thermal device by default.
With the install_usb_driver.sh script this driver is replaced
to a USB to serial driver.
This script is included for the needed platforms in the zip
installer provided in the getting started.
https://onedigi.atlassian.net/browse/DEL-8126
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Since these images are highly compressable, this greatly reduces the amount of
space taken up by build artifacts.
Modify the code used to generate the .sdcard and .installer.zip files so that
they contain the decompressed .ext4 image.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Create scripts to install DEY firmware using a USB stick.
https://jira.digi.com/browse/DEL-6802
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit replaces the hardcoded text from the readme file by the environment
variables adding from this way the release version to the file content.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds a installation script that uses fastboot support to
update the target firmware.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6845
The artifacts that must go inside the installer ZIP image are not anymore
the ones in UBOOT_CONFIG. For CC8X, the artifacts are combinations of
UBOOT_CONFIG and RAM_CONFIGS.
This commit adds a function 'get_bootable_artifacts()' to boot-artifacts class
to generate a new variable BOOTABLE_ARTIFACTS with the list of bootable
artifacts DEY produces.
The installer recipe can then simply iterate on that list, rather than
needing to calculate it by itself.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
A variable called IMAGE_BOOTLOADER was being used without distinction for
referring to two different things:
- the recipe that builds the bootable artifacts
- the prefix of those artifacts
The value of this is "u-boot" for most platforms, but "imx-boot" for the
CC8X based platforms.
The name of the variable is misleading, so this commit splits it into two:
- BOOTLOADER_IMAGE_RECIPE, to refer to the recipe
- UBOOT_PREFIX, to refer to the prefix of the bootable artifact
With the separation, the variable UBOOT_SYMLINK becomes a generic formed
one, so it is moved to digi-defaults.inc.
While on it, fix the image_types_digi.bbclass which was not making use of
the original variable to establish all the dependencies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The generate_installer_zip() function had a hardcoded "u-boot" filename when adding
the bootloader to the list of files that are put in the installer .zip.
https://jira.digi.com/browse/DEL-6174
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the migration to Morty, some of the paths to the artifacts (boot
and rootfs images) need to be updated.
While on it, also remove the temporary README.txt file which is not
needed after it has been packed in the zip installer.
https://jira.digi.com/browse/DEL-4013
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It's not enabled by default. It's controlled by DEY_IMAGE_INSTALLER
variable in the project's local.conf.
https://jira.digi.com/browse/DEL-3591
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Hector Palacios
Gabriel Valcazar
Arturo Buzarra
Mike Engel
Francisco Gil
Javier Viguera