There is a corner case that wasn't cover by the script, if you
use the script using a -k -t the "-t" would be the name of the
dek.bin.
This new implementation solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Some variables in the script belong to u-boot, not to the shell
running the script. Escape those variables so the shell does not
expand them.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The command trustfence update doesn't require the partition argument.
Besides of that, remove extra fi on the cc8m platforms.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Some minor fixes:
* return error code if installation fails
* cosmetic: update comment with options
* just exit after error and do not execute boolimit command
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
An additional line was added to a comment block without the '#' character,
resulting in the following error when running the script:
Unknown command '-' - try 'help'
Nonetheless, this error is harmless and the script continues as expected, which
is the reason why we hadn't found it until now.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Use the intention of installing dual boot firmware as a condition to set
bootlimit=3 so that the bootcount mechanism is enabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DUB-1058
During firmware install, the target may be reset several times.
We don't want the bootcount to count these as boot attempts.
This was done in a791bb4463 for the ccmp1
but not for the rest of platforms.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
If the default r/w rootfs is not found it will try to do a
fallback to the squashfs image.
In the nand devices additionally we need to set the rootfstype
to squashfs.
https://onedigi.atlassian.net/browse/DEL-8638
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
All the 'altboot' script functionality has been moved directly to the 'altbootcmd' command
in U-Boot, so this script is no longer necessary. Remove it for all platforms.
https://onedigi.atlassian.net/browse/DEL-8674
Signed-off-by: David Escalona <david.escalona@digi.com>
The install scripts from SD/USB use a fixed image name.
If you are trying to install a different image you need to set
the env variable 'image-name' first.
Add a helper message if default files are not found to
avoid needing to go to the documentation.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The 'bootcount' value is now incremented and stored in the system on every boot and
not only then the 'upgrade_available' flag is set. Also, ensure the value is cleared
when the 'altboot' script is executed by running the new U-Boot command 'bootcount reset'.
https://onedigi.atlassian.net/browse/DEL-8506
Signed-off-by: David Escalona <david.escalona@digi.com>
We no longer need logic to determine the SOM's RAM size and bus width, we only
need to know the SOC revision, which is info that is always available.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The first time the 'dualboot' variable is tested it is directly run in
the script and doesn't need to escape the special characters.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The variable 'dualboot' (and 'singlemtdsys' for CC6UL) was restored
after the bootcmd that runs the first time after programming U-Boot runs
fastboot again to resume the script.
This is ok for the CC6UL but not for the rest of platforms, that run the
partition script on the bootcmd, *before* running fastboot.
Restore the variables for all platforms in the bootcmd right after
resetting the environment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Ensure stdout redirection to the USB interface is removed in every case.
Otherwise, it would be left redirected when INSTALL_UBOOT_FILENAME is
manually set.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Check the status of 'dualboot' env variable.
If set to "yes", use the dualboot partition table in the script and
restore the variable (default is "no") after resetting the environment.
Also, for dualboot, there's no need to wipe the recovery partition or
boot into recovery mode.
For dualboot, this script programs both systems A and B with the same
images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7649
Fastboot is configured on boot with the current MMC configuration.
If we create a GPT partition table, we need to restart fastboot before we
try to program any partition with the 'flash' fastboot command.
Set 'fastboot_dev' to a different device, 'sata' for example an back to 'mmc'
to trigger a fastboot restart after creating the partition table on blank
devices.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The current syntax only works properly when running the script through bash.
Change this so that it works for other shells as well.
While at it, fix a typo in the message that appears when the variant can't be
detected in the 6UL script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We document how to use this script from the Yocto image directory. Now that the
*.ext4 files are compressed by default, the script needs to automatically
decompress said files before starting the update process.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The install script of cc8x had errors (using double '==' instead
of single on comparisions).
Besides fixing this typo, this commit changes the logic to:
- default to 2GB U-Boot for variants other than the ones in the
list.
- consider variant code 0x00 (not programmed HWID) as a failure.
thus forcing the user to specify the file on the command line.
This second action is done also on the cc6ul script.
Reported-by: Hector Bujanda <hector.bujanda@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Check the existence of files before the 10 second wait.
- Print the list of filenames to program to each partition.
- Print the file that's being updated to each partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the generalization done in previous commits, we have now several files
that are identical and can be merged into a common SOM or SOM family
folder.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Since this overlay is only used in the SBC Pro bootscript, have a separate
bootscript for the SBC Express.
https://jira.digi.com/browse/DEL-7276
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The boot script appends values to certain variables such as
$extra_bootargs and $overlays.
If the final instruction of the boot script (dboot command)
fails, these variables contain the new values, plus the original
one. Since the user recovers the prompt, he may do a 'saveenv'
to save the environment, and the modified variables will be
saved, only to be enlarged again on the next boot.
This can lead to repeated strings on such variables.
Save the original value and restore it in case of failure on
the dboot command.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Follow the syntax:
_ov_<som|board>_<functionality>[_<hardware>].dts
where:
_ov_ identifies the file as an overlay.
som|board identifies whether the overlay applies to the SOM
or to the carrier board.
functionality identifies the function of the overlay.
hardware identifies the hardware to which the overlay
applies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Wrapping unterminated lines doesn't work for scripts (even
if they contain the backslash).
Substitute with full non-wrapped if/elif sentences.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7252
With the device tree overlays mechanism in place, the bootscript
doesn't need to set the fdt_file variable. Instead, it will use
the value it has (which can be changed by the user) and it will
simply update the 'overlays' variable with the device tree
overlays that apply basing on the hardware capabilities found
on the HWID, SOM version, and carrier board version.
This allows a user to override the default fdt_file to point
to his custom device tree, but still make use of the boot script
for hardware-detected overlays.
Without the need to set the base filename, the boot script is the
same for any carrier board of the ccimx8x SOM, so this commit
moves it to a common folder.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Francisco Gil
Mike Engel
Isaac Hermida
Gabriel Valcazar
Hector Palacios
David Escalona
Tatiana Leon
Gonzalo Ruiz