Commit Graph

16 Commits

Author SHA1 Message Date
Hector Palacios 9b165196bb global: create DIGI_SOM variable and reformulate DIGI_FAMILY variable
Certain platforms share a processor family but need to be differentiated
between them. DEY was using the variable DIGI_FAMILY as the SOM name
rather than the family. It becomes useful to have both (DIGI_SOM as the
more specific, and DIGI_FAMILY as the more generic).

This is the case, for example, of:

- ccmp1 (family)
  - ccmp15 (SOM)
  - ccmp13 (SOM)
- ccimx8m (family)
  - ccimx8mm (SOM)
  - ccimx8mn (SOM)

Both variables are used on the machine overrides.
Where DIGI_FAMILY was used, use now DIGI_SOM.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
2023-05-10 17:33:23 +02:00
Isaac Hermida 03c3593050 hostapd: ccimx93: configure AP mode
https://onedigi.atlassian.net/browse/DEL-8346

Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
2023-04-20 17:05:00 +02:00
Arturo Buzarra 2bf4aa098f wpa_supplicant/hostapd: update Murata wireless support to version imx-kirkstone-fafnir_r1.0
This commit updates the patch series for wpa-supplicant and hostapd v2.10,
based on the Murata release imx-kirkstone-fafnir_r1.0 that matches with the
Cypress Linux WiFi Driver (FMAC) release v5.15.58-2023_0222

https://onedigi.atlassian.net/browse/DEL-8407

Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
2023-03-01 11:12:36 +01:00
Javier Viguera 065cf3e9c4 kirkstone migration: general update to the new override syntax
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
2022-06-20 11:39:57 +02:00
Hector Palacios 0ba9b85574 hostapd: adapt recipe for read-only-rootfs
The access point configuration files are dynamically modified on a post
install script to generate an SSID name based on the last digits of the
MAC address (physical or virtual) assigned to a wlanX interface.

On read-only file systems, this is not possible, so add some conditional
code to the do_install() to use instead the $DIGI_FAMILY name.

Caveat: if several identical SOMs with read-only-rootfs co-exist on the
same network as APs, they will identify with the same SSID.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>

https://onedigi.atlassian.net/browse/DEL-7708
2021-11-05 11:18:16 +01:00
Javier Viguera c89a66480b meta-digi: remove postinst on target when using read-only-rootfs image feature
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
2021-11-05 11:18:16 +01:00
Arturo Buzarra 6d23ee1fe7 hostapd: generalize recipe to reduce the overhead when adding a new platform
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
2020-01-10 13:21:27 +01:00
Arturo Buzarra dd723df576 hostapd: add support for the ccimx8mn platform
https://jira.digi.com/browse/DEL-6911

Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
2020-01-10 12:09:25 +01:00
Gabriel Valcazar b957f0ef75 hostapd: add systemd support
When using systemd, putting the wlan1 interface up wasn't working because it
was relying on initscripts that are no longer in the filesystem.

Add a parametrized version of the upstream hostapd service to be able to use a
configuration that's different from the default one. Also, modify the
generation of the wlan1 entry in /etc/network/interfaces to be able to use
different post-up/pre-down hooks depending on the init manager that's being
used.

https://jira.digi.com/browse/DEL-6504

Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
2019-03-14 13:34:07 +01:00
Gabriel Valcazar b769f90e2a hostapd: rework postinst script to avoid lock-ups on first boot
The postinst script tries parsing the wireless MAC address from the sysfs, and
in case of failure, obtains a random string from /dev/urandom. This caused two
problems when booting with systemd:

 * The wifi interface's sysfs entry is not available because the interface
hasn't had time to start up yet, forcing the script to always resort to the
/dev/urandom fallback.
 * Even though the postinst scripts are run after populating the volatile
filesystems (as can be seen in run-postinsts.service's dependencies), trying
to read either /dev/random or /dev/urandom at this point in the system's
initialization causes it to lock up indefinitely.

To avoid either situation, add the following changes:

 * Immediately exit when running on a non-wireless target, as the script isn't
necessary in this use case.
 * Parse the wireless mac address from /proc/device-tree/wireless, which is
guaranteed to always be available when the script runs. By doing this, we can
remove the /dev/urandom fallback entirely.

https://jira.digi.com/browse/DEL-6415

Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
2019-02-18 18:01:57 +01:00
Arturo Buzarra 303106cce1 sumo migration: use pkg_postinst_ontarget() to delayed operation on first boot
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
2019-01-16 11:31:00 +01:00
Gabriel Valcazar 5666f6a85e hostapd: add support for the ccimx8x platform
https://jira.digi.com/browse/DEL-6067

Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
2018-08-24 17:51:53 +02:00
Arturo Buzarra f36e8a94a1 hostapd: add support for ccimx6qpsbc platform
https://jira.digi.com/browse/DEL-5082

Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
2017-10-18 09:20:11 +02:00
Jose Diaz de Grenu 7ef80dd7ad hostapd: generate unique SSID for SoftAP
If two or more targets are in the same environment, all of them will
broadcast the same SSID, which may be a problem when a client wants
to connect to a specific device.

Use the last bytes of the non-virtual wireless MAC for the name of the
SSID, a random value with no hexadecimal characters is used if the MAC
is not available.
Also drop 'wpa2aes' from the SSID.

https://jira.digi.com/browse/DEL-4129

Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
2017-09-05 16:37:54 +02:00
Hector Palacios 2dcf33b283 hostapd: parametrize hostapd init script per interface
The original init script hardcodes the configuration file to use so it
cannot be re-utilized for concurrent AP/AP mode where two interfaces can
be used as SoftAP.

This commit uses the variable ${IFACE} to:
- select a specific configuration file per interface:
  /etc/hostapd_${IFACE}.conf
- create a specific PID file per interface:
  /var/run/hostapd.${IFACE}.pid

With this, the /etc/network/interfaces can use the script for using SoftAP
in different wireless interfaces.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
2017-04-05 18:15:27 +02:00
Javier Viguera c250365797 morty migration: hostapd: update package
https://jira.digi.com/browse/DEL-3451

Signed-off-by: Javier Viguera <javier.viguera@digi.com>
2017-02-28 11:46:56 +01:00