This recipe had a post install script to do the following:
- create runlevel symlinks.
- comment the 'auto' lines of /etc/network/interfaces if running on
a non-Wi-Fi variant.
- add Atheros or QCA bridge examples depending on the detected chip.
- add wlan1 interface only if QCA chip is detected.
This post install cannot run on a read-only-rootfs so the recipe has been
reworked to do the same things at build time:
- the runlevel symlinks have been removed because they are taken care
of by a poky class.
- add a pre-up condition (the existance of a wireless entry on the device
tree) so that the interface is not brought up if the condition is not met.
- for the cc6/cc6n, since the Wi-Fi chip can be Atheros or QCA, add
specific wlan1 and br0 fragments with a pre-up condition basing on the
detected ID of the Wi-Fi chip
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7708
Some packages require different scripts, configuration files or installations
depending on the wireless chip assembled on the target. In general, the way
to support both chips in one image is to have the recipes install both
versions of the aforementioned files, then leave only the strictly necessary
version once the wireless chip can be deduced.
In the case of the init-ifupdown recipe, this involves installing temporary
configuration fragments that are later erased. In the case of the standby
script, the logic can be implemented in a single file.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Use ifupdown variable 'p2p-network-id' to pass a WPA supplicant network
id, to pre-populate some parameters (SSID/passphrase) when creating the
group where this device is the GO.
Also replace go_intent=7 with the auto parameter. According to the
documentation:
"auto" can be used to request wpa_supplicant to automatically
figure out whether the peer device is operating as a GO and if so,
use join-a-group operation rather than GO Negotiation.
https://jira.digi.com/browse/DEL-6741
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes the error message when specific network scripts
are launched.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6728
This way, the wlan1 interface will only be created whenever a user wants to
bring the interface up with ifupdown. Modify the script to be able to delete
the interface whenever it gets brought down and remove its .sh file extension
so run-parts can run it properly during the ifup process.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Tests have shown that having this interface up hinders wlan0's performance,
so don't bring it up by default.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
To avoid bringing up interfaces before they're created by udev scripts
(specifically wlan1), wait until udev settles before starting the service.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When using systemd, putting the wlan1 interface up wasn't working because it
was relying on initscripts that are no longer in the filesystem.
Add a parametrized version of the upstream hostapd service to be able to use a
configuration that's different from the default one. Also, modify the
generation of the wlan1 entry in /etc/network/interfaces to be able to use
different post-up/pre-down hooks depending on the init manager that's being
used.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit:
- moves the files in platform folders 'ccimx6qsbc' and 'ccimx6ul' to the
recipe's folder (they are the same).
- moves the install instructions for virtual wlan and wlan1 into functions
that can be reused by both platforms.
- moves the bridge example install instruction to the generic do_install()
since it's the same for all.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
virtwlans script creates an additional interface on startup for QCA6564 chip.
The created interface purpose is for ap mode, so specify its type on creation.
https://jira.digi.com/browse/DEL-5290
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
wlan1 is the interface used for SoftAP, so use that one instead. This also
matches with the 'Network bridging' chapter of the documentation.
https://jira.digi.com/browse/DEL-4823
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The supplicant support for a bridge was not being managed,
then the bridge was failing when the softap was configured
with an encryption. With this change we launch a supplicant
instance with the bridge support after checking that the
/etc/network/interfaces contains the required parameters.
https://jira.digi.com/browse/DEL-4454
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
We need to pass different log levels depending on the message, so they
appear in the console, so generalize the 'log' function.
https://jira.digi.com/browse/DEL-4682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit removes the interfaces that are managed by Networkmanager
from the /etc/network/interfaces entry.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The readlink command on a real file was expanding to nothing and then
the '/etc/resolv.conf' file was not being updated with the nameservers.
With this change we only run the 'readlink' link command after checking
that the file is actually a symbolic link.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
udhcpc options added to 'network/interfaces':
* '-S' to log to syslog too.
* Redirect the output to '/dev/null' not to show messages of the tool running
in background (for example when executing 'ifup').
* '&' to send the udhcp client to background.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit verifies that the wlan1 interface is not already created
and will skip creating the virtual interface if it already exist.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3917
This commit changes the concurrent mode script to enable always the
AP interface through the wireless device but will warn the use
if the virtual MAC addresses used are the default once.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3900
This commit adds the wireless concurrent mode as a default
configuration to the CC6UL machine.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3818
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Add commented lines as example to configure and run the wlan0 interface in AP
mode using hostapd daemon.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the networking configuration to support the creation of a bridge
interface.
Signed-off-by: Jose Diaz de Grenu de Pedro Jose.DiazdeGrenudePedro@digi.com
Also remove config entries in '/etc/network/interfaces' if corresponding
variable is not defined.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Allows to configure static DNS servers in resolv.conf setting following
variables in your project's config file:
ETH0_STATIC_DNS, ETH1_STATIC_DNS, WLAN0_STATIC_DNS
Those variables accept multiple dns servers (separated by spaces)
https://jira.digi.com/browse/DEL-1266
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The interfaces file is now dynamically created for eth0, eth1 and wlan0. By
default they are configured if enabled in the machine features, and have
the same static configuration as before.
The static IPs can be configured as follows:
ETHn_STATIC_IP = "<ip address>"
ETHn_STATIC_NETMASK = "<netmask>"
ETHn_STATIC_GATEWAY = "<gateway>"
WLAN0_STATIC_IP = "<ip address>"
WLAN0_STATIC_NETMASK = "<netmask>"
To configure dynamic IPs you can use the following configuration in your
local.conf:
ETHn_DHCP = "dhcp"
WLAN0_DHCP = "dhcp"
https://jira.digi.com/browse/DEL-1178
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Rework the conditional expression so the overall return value of the
script is not failure, because in that case the 'ifup' command fails
with:
run-parts: /etc/network/if-up.d/ifup exited with code 1
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Simplify the package for maintainability and fix some minor things.
https://jira.digi.com/browse/DEL-818
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Arturo Buzarra
Isaac Hermida
Hector Palacios
Gabriel Valcazar
Javier Viguera
Mike Engel
Jose Diaz de Grenu
Tatiana Leon
Alex Gonzalez
Jose Diaz de Grenu de Pedro