The suspend script was unloading the wireless module driver *only* if the
interface 'wlan0' was previously up. If the interface is down the module
does not unload and the system fails to suspend.
This patch removes the module always if it appears in the list of loaded
modules.
While on it, move the unloading of wireless after the unloading of
Bluetooth, to be in line with the reversed order in which they are loaded
on the resume_interfaces() call.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3241
Use the static binary from the tarball, which should be common across
different platforms and operating systems.
https://jira.digi.com/browse/DEL-3261
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The u-boot header is required for U-Boot to boot the image in secure boot.
The cpio.gz.u-boot.tf image gets signed and encrpyted if required.
https://jira.digi.com/browse/DEL-3242
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
https://jira.digi.com/browse/DEL-3195
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The OTP word read was incorrect. HW_OCOTP_CFG5 corresponds to bank 0 word 6.
https://jira.digi.com/browse/ADK4A-1129
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Print the wireless configuration as well as supplicant and hostapd version info
https://jira.digi.com/browse/DEL-3147
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows to correctly read the U-Boot version when using encrypted images.
Leave the current implementation as a fallback, in case the system is using an
old U-Boot which does not populate the device tree property.
https://jira.digi.com/browse/DEL-3025
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
When encryption is enabled, the signed U-Boot image will be used for the uSD.
This allows the uSD image to boot the device and recover it from the U-Boot
console, which is its main purpose. Nevertheless, the uSD image will not be
able to boot Linux.
https://jira.digi.com/browse/DEL-2877
This reverts commit 2e13e194d9.
Optimize the provided config file with default support for 802.11ac.
https://jira.digi.com/browse/DEL-3128
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Also change the image type of dey-image-trustfence-initramfs.
https://jira.digi.com/browse/DUB-615
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
x11vnc is light in size so we can include it in the final rootfs after
reworking the qtbase and packaga-management stuff.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Including ICU increases the rootfs too much and is not needed unless we want
to build qtwebkit, so only include it for platforms with enough size.
Additionally, linuxfb support is not needed for ccimx6.
https://jira.digi.com/browse/DEL-3058
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The ccimx6ul has a small NAND flash rootfs partition, and removing
package-management image feature saves around 10MB.
https://jira.digi.com/browse/DEL-3058
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not use hcitattach to reconfigure the baudrate but set it directly in the
Bluetooth FW file; this work arounds some synchronization problems when not
using HW flow control.
https://jira.digi.com/browse/DEL-3052https://jira.digi.com/browse/DEL-3057
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
CCIMX6UL's rootfs partition is not big enough for the default
'dey-image-qt' image. This commit reworks the QT5 and SATO installed
packages for the ccimx6ul, so the image fits in the rootfs partition.
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ccimx6ul does not have a GPU, so opengl based gstreamer sink will
not work. Thus apply the patch only for the CCIMX6.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This plugin uses directly the framebuffer, so it can be used in non
X11-based systems, but it oly supports software rendered content,
no opengl/es.
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to build 'qtbase' for the CC6UL.
It only fixes the broken build, as any QT application that uses OpenGL/ES
will fail because there is no support for QT/OpenGL in modules without
a GPU.
Fix:
arm-dey-linux-gnueabi-g++ -march=armv7-a -mfloat-abi=softfp -mfpu=neon
--sysroot=/ssd/dey/jethro/fb/ccimx6ulsbc/tmp/sysroots/ccimx6ulsbc
-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Wl,-O1 -o opengldesktop
opengldesktop.o -lGL
.../arm-dey-linux-gnueabi/5.2.0/ld: cannot find -lGL
A similar commit was done in meta-fsl-arm.git (branch Krogoth).
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add an empty calibration file to prevent the 'xinput_calibrator' tool
being launched on X11 desktop start.
The file does not have any calibration data because capacitive touch
displays usually do not need calibration.
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This file has not been synchronized with the one in Poky since previous
versions of DEY. Not much has changed, but sync it anyway.
Also:
* Get SHOWCURSOR from formfactor config files, but fallback to one
value depending on HAVE_TOUCHSCREEN if it was not configured.
* Rename the bbappend to the version generic '_%.bbappend'
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name "ext-eth" seems to indicate "External Ethernet". Rename that variable
and related ones to a more proper name like second ethernet.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Copy of the original defconfig in hostapd-2.4 and enabling next options:
- CONFIG_LIBNL32
- CONFIG_EAP_PSK
- CONFIG_EAP_PWD
- CONFIG_WPS
- CONFIG_WPS_NFC
- CONFIG_RADIUS_SERVER
- CONFIG_IEEE80211N
- CONFIG_IEEE80211AC
- CONFIG_DEBUG_FILE
This means that the hostapd binary will have support for that features, but it
does not imply that the wireless chip does support it.
https://jira.digi.com/browse/DEL-2936
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This reverts commit b8f50680e5.
The support to read and write to an encrypted environment has been added, so
there is no need to exclude the u-boot-fw-utils anymore.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Add commented lines as example to configure and run the wlan0 interface in AP
mode using hostapd daemon.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not autostart hostapd daemon on boot because because it will conflict with
wpa-supplicant process and add a custom hostapd.conf file with WPA2-AES
encryption.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Currently we don't support booting encrypted images from an SDCARD, so
just disable the generation of such images.
https://jira.digi.com/browse/DEL-2876
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
enabled
There is currently no support on fw_printenv/fw_setenv to access an
encrypted environment.
This commit removes the package if U-Boot environment encryption is
enabled to avoid environment corruption on access.
It also documents the issue as a known issue.
https://jira.digi.com/browse/DEL-2625
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
According to 'grep' manual '\s' is a synonym for [[:space:]] which
matches spaces, TABs, but also newlines, etc. We want to only match
spaces and TABs, so use [[:blank:]] instead.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* set cellular user and password
* stricter replace to not match set values
* only set cellular interface to auto
Internal merge of Github's PR:
https://github.com/digi-embedded/meta-digi/pull/2
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, on closed devices you cannot revoke any key. To do so, it is
required to compile a U-Boot which instructs the HAB not to set the sticky
bit which write protects that field in the OCOTP controller.
This patch introduces a Yocto macro which allows to configure U-Boot in
that way.
In the ConnectCore 6, the value of this settings is ignored, because HAB never
sets the sticky bit which write protects that field.
https://jira.digi.com/browse/DUB-665
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
While performing usability testing on the TrustFence documentation, it has
been noted that in order to follow the secure boot instructions the
console needs to be enabled.
We have now moved the secure console section to the end of the
documentation so that disabling the console is the last configuration to
make in a secure system.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Down the bluetooth interface before entering suspend and up it after resuming
if it is present and up.
https://jira.digi.com/browse/DEL-2806
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Start syslog earlier (from 20 to 02) so it is running and other init scripts
can use it to log into the system like the S03networking script.
https://jira.digi.com/browse/DEL-2812
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This is needed so the encrypted rootfs is properly resized to the
partition size.
https://jira.digi.com/browse/DEL-2765
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
New functionality has been implemented in trustfence-tool application,
so there is no need to call cryptsetup command.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Get filesystem type of rootfs block device and pass it explicitly to the
mount command to clean following warnings on boot:
EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need a different configuration file, because the SoftAP functionality is
supported using the hostapd package instead of the wpa_supplicant.
https://jira.digi.com/browse/DEL-2744
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Extend the report with more details about:
- memory usage
- all network ports (-a) with their related PIDs (-p)
- network link details (to determine if interface is up)
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Using module-detect there are some audio reverb problems. Reverting that commit
will make pulseaudio use module-udev-detect again instead, which takes longer
to initialize but does not have that problem.
This reverts commit e021f738ee.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
When module-alsa-sink is used, the audio is sometimes heard with
reverb. We will go back to module-udev-detect, so the functionality
introduced in the commit being reverted won't longer work.
This reverts commit fca507d316.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Add a couple of bluez patches: one for increasing the number of connection
showed with "hcitool con" command and remove "refresh" option in hcitool
help that is not supported.
The qca6564 chip can support more than 10 simultaneous BLE connections.
https://jira.digi.com/browse/DEL-2735
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
qtwebengine does not support armv5 platforms (for example ccardimx28js),
so we need to restrict that package to the ccimx6sbc
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When Trustfence is enabled, this adds a dependence on the TF initramfs,
so it's built and added to the boot image.
It also modifies the u-boot boot script on the fly, to boot correctly
using the Trustfence initramfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe builds the initramfs image that is used to boot from an
encrypted rootfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package adds some files needed by the trustfence initramfs and that
are not included in other packages.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
lvm2 package provides some user-space tools, but also some dynamic
libraries: libdevmapper, libdevmapper-event, etc.
This commit allows to package the LVM2 libraries in a different package
than the LVM2 user-space tools. This way other user-space tools (e.g.
cryptsetup) that runtime depends on the LVM2 libs can only add that libs
package to the rootfs, instead of the whole LVM2 utilities.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ccimx6ul or ccardimx28 do not have hdmi interface, so do not install the
hdmi hotplug script.
https://jira.digi.com/browse/DEL-2654
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The TRUSTFENCE_UBOOT_DEK_SIZE Yocto macro maps to the UBOOT_DEK_SIZE U-Boot
Kconfig entry, which is defined as a choice entry. This makes necessary
to explicitly define the choice Kconfig entry for the configuration to
work.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
There are several possible values for TRUSTFENCE_UBOOT_ENV_DEK:
* Not defined: if the trustfence support is not included.
Should not include the feature.
* 32 characters: when defining a valid key.
Should include the feature.
* "0": when explicitly disabling the feature.
Should not include the feature
* <other>: Invalid value, should trigger the error.
This commits fixes the logic so that 'None' (no defined) is taken as a valid
value.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The following utilities are supposed to be available on the environment's
PATH:
uptime, uname, cat, zcat, free, ps, mount, netstat, route, ifconfig, gzip
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit changes the CONFIG_CCIMX6SBC_CONSOLE_ENABLE_GPIO_NR define
into a platform independent setting.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2641
The power regulator connected to the qca6554 chip is always on, which causes
the Bluetooth part to not work correctly after a software-reset.
This commit asserts momentarily the BT_EN line during the start-up sequence
to reset the Bluetooth controller so that it is in a predictable state after a
reset.
https://jira.digi.com/browse/DEL-2623
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-2603
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
The steps to set the bluetooth MAC address is send an specific hci command
and an hci reset, so the bluetooth interface need to be up in order to
configure it.
Additionally we have generalized the way to read the MAC address from the
device tree and removed some old code for getting the MAC address in
kernel version 2.
https://jira.digi.com/browse/DUB-595
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add a software workaround to disable the HW flow control because the SOM
revision 3 (and older) has swapped the bluetooth TX and RX lines so we need
to operate in DTE mode which implies that the HW control lines are swapped.
This also implies reducing the baudrate to avoid the need for HW flow control.
https://jira.digi.com/browse/DEL-2611
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Implement the set of TRUSTFENCE_ macros to configure each secure boot feature
available in U-Boot.
https://jira.digi.com/browse/DUB-570
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
sysinfo is a bash script which gathers all the relevant information
from a running system on a timestamped compressed file.
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Victor Rubio Victor.RubioTorroba@digi.com
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds a trustfence class to encapsulate all trustfence
configurations.
https://jira.digi.com/browse/DEL-2257
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This support comes from meta-linaro @9f899282caa9 and adds the ability
to configure getty dynamically from the console argument in the kernel
command line.
This will make it possible to enable/disable the console dynamically as
signalled by U-Boot.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Port the bluez5 qca6564 support based on 5.19 to the current version 5.33.
The ported version is based on qualcomm tag r110048.3.
https://jira.digi.com/browse/DEL-2581
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Hector Palacios
Javier Viguera
Diaz de Grenu, Jose
Pedro Perez de Heredia
Alex Gonzalez
Gabriel Valcazar
Isaac Hermida
Stephan Klatt
Mike Engel
Jose Diaz de Grenu de Pedro
Victor Rubio