That restriction does not make any difference in the final image
contents, because no package depending on X11 is added to the image, and
it prevents the image from being built with the default DEY
configuration (that has X11 distro feature enabled).
This also allows to build the image in the buildserver with the same job
that builds other X11 based images.
https://jira.digi.com/browse/DEL-2106
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move this variable to DEY distro conf so that it is available for any
recipe built with the distro.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
It has been observed that the wireless interface ocassionally fails to resume
from suspend on extensive long run validation testing, so we workaround it by
bringing the interface down before suspend and bring it up again after resume
This reverts commit a77cd1406d.
https://jira.digi.com/browse/DEL-2217
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This image provides a demo rootfs with QT. It can be built for
framebuffer and also for X11.
https://jira.digi.com/browse/DEL-2196
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a user-space workaround for the reboot/poweroff problems we
are having in the ccimx6sbc. Seems that they are not reproducible when
only one core is enabled, so the workaround is to disable the rest of
the cores for rebooting/halting.
https://jira.digi.com/browse/DEL-2133https://jira.digi.com/browse/DEL-2148
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit a9e36a74bb20ab38f220116ba2742dca3d80c293)
So we can build a 'dey-image-graphical' image for framebuffer with
support for QT5.
https://jira.digi.com/browse/DEL-2017
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No functional change, as 'package-management' is added via the included
dey-image-minimal recipe, and 'pointercal-xinput' is a dependence of
xinput-calibrator which is added for X11 images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We switch to the way it works in Android, short press (<2s) takes the target
to suspend and long press, >2s but <9s, performs a software controlled
power down.
Pressing longer than 9 seconds does the uncontrolled hardware power off
directly from the PMIC.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The suspend script did a ifup/ifdown on wlan0 to workaround issues we
had using wireless drivers on some platforms.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Now that the MX5 platforms have been removed the only value for
WPA_DRIVER is 'nl80211' (used by Atheros wireless driver), so there is
no need to have a platform specific value.
Just initialize the value in the init-ifupdown recipe with a weak
assignment so it can be override from the project's local.conf.
https://jira.digi.com/browse/DEL-1890https://jira.digi.com/browse/DEL-1969
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has a hard-coded dependence in bluez4 and this has been removed from
openembedded-core.
There is a different Jira for the bluez5 migration.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Microcom is a minimal version of minicom and is extremely useful
for doing basic testing on target (for instance, talking to a modem
or other serial connected device).
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
(cherry picked from commit 90c6708e948c9b9942b48d425ff21e0affc2f8d7)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the networking configuration to support the creation of a bridge
interface.
Signed-off-by: Jose Diaz de Grenu de Pedro Jose.DiazdeGrenudePedro@digi.com
This simplifies the code and as an extra allows to override the default
root password from the project's local.conf (setting MD5_ROOT_PASSWD
variable)
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Changes in Poky (Dizzy) made our SDK unable to build QT applications.
This commit syncs again with upstream so the toolchain is able to build
QT apps.
https://jira.digi.com/browse/DEL-1544
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 1.7 Dizzy added support for os-release file in a new recipe, so
we need to remove it from our base-files bbappend in order to avoid
conflicts between both packages.
https://jira.digi.com/browse/DEL-1390
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This can be used as a template for size optimized images. It constraints
the use of X11 related packages and the image types used.
To build, add the following to your conf/local.conf:
DISTRO_FEATURES_remove = "x11"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Also remove config entries in '/etc/network/interfaces' if corresponding
variable is not defined.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Allows to configure static DNS servers in resolv.conf setting following
variables in your project's config file:
ETH0_STATIC_DNS, ETH1_STATIC_DNS, WLAN0_STATIC_DNS
Those variables accept multiple dns servers (separated by spaces)
https://jira.digi.com/browse/DEL-1266
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the package manager postinst framework to run the rootfs resize
script on first boot after the image has been flashed to the EMMC.
https://jira.digi.com/browse/DEL-1317
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP to support 'connmand' for dhcp.
* CONFIG_CTTYHACK to make easier boot from an initramdisk.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No longer needed because a patch with the same functionality was
accepted upstream (meta-fsl-arm).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was added in the past (dey-1.4) as a workaround for reboot/poweroff
issues not completing properly [DEL-633]. At that time the util-linux
umount command worked while the one from busybox didn't. Now this
workaround is not needed anymore. The reboot/poweroff commands complete
correctly with busybox' umount, so just remove the runtime dependence.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to easily build QT applications sourcing the toolchain
environment setup script and then running:
$ qmake -project
$ qmake
$ make
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the 'mkimage' host tool to the toolchains generated with 'bitbake
meta-toolchain' or with 'bitbake -c populate_sdk <image>'.
This allows to use the standalone toolchain to build kernel images of
type uImage (with u-boot header)
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We used to have two distros:
DEY: without X11 support
DEY-GUI: with X11 support
After the change, we have just one DEY distro with X11 support. At the
same time add a CONFLICT_DISTRO_FEATURE to dey-image-minimal so it
cannot be built with X11 distro feature enabled. So now in order to
build 'dey-image-minimal':
DISTRO_FEATURES_remove = "x11"
needs to be added to your project's local.conf file.
https://jira.digi.com/browse/DEL-858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NETWORK_MANAGER is a packagegroup-core-x11-sato recipe variable, so
override it in a bbappend instead of at a distro level.
At the same time remove a useless WEB variable from the image recipe.
WEB is a packagegroup-core-x11-sato local variable as well, and
overriding it in another recipe does not have any effect, so just
remove it.
https://jira.digi.com/browse/DEL-858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was working in dey-1.4 because there was a basic support for static
nodes in poky. They removed it in Yocto 1.6.
We still need this functionality, so add it here in the bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Remove inconditional inclusion of dey-gstreamer: dey-image-minimal
includes dey-gstreamer if MACHINE_FEATURES contains 'accel-video'
so dey-image-graphical inherits this from dey-image-minimal.
This does not make any difference for IMX platforms but allows to
remove inconditional inclusion of dey-gstreamer for MXS. To allow
'gaku' (sato audio player) playing MP3 files COMMERCIAL_AUDIO_PLUGINS
is added to the distro config file.
* Only include 'owl-video' if MACHINE_FEATURES contains 'accel-video'.
* Remove inconditional inclusion of qt4-examples from dey-qt
packagegroup. Package qt4-examples is part of the RRECOMMENDS for
package qt4-demos, so it will be included anyway and not having it
hard-coded allows to bad-recommend it for some platforms and not
for others.
* Use BAD_RECOMMENDATIONS to avoid inclusion of 'qt4-demos-doc' package
for all platforms (this package does not add any value and weights
about 50MB) and 'qt4-examples' for ccardimx28js.
With all those changes, we get a graphical image with GTK + QT that fits
in the standard rootfs partition for ccardimx28js.
https://jira.digi.com/browse/DEL-1164
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Alex Gonzalez
Javier Viguera
Hector Palacios
Isaac Hermida
Jose Diaz de Grenu de Pedro
Paul Osborne