Otherwise, packagegroup-dey-core won't get included in ccimx6ulstarter images.
This packagegroup contains fundamental OS elements, such as sysvinit, kernel
modules and so on. Use CORE_IMAGE_BASE_INSTALL instead and make sure to append
to the default value instead of overwriting it.
https://jira.digi.com/browse/DEL-6536
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes the following examples that were accessing
hardware interfaces:
- dey-examples-adc
- dey-examples-can
- dey-examples-gpio-sysfs
- dey-examples-spidev
- dey-examples-watchdog
The recipe 'dey-examples-digiapix' builds similar examples that make
use of Digi's APIX for accessing the hardware. Add this recipe to images
- dey-image-qt
- core-image-base
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5169
Since commit 4b41d9072a304fadbe1cc37c94575f12a2a47fd3 in poky
busybox removes the RRECOMENDS dependency with busybox-syslog,
then we need to explicitly add this dependency in the recipes.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This script was added a long time ago and it never gets used anymore, so remove
it from our images.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These packages create dependency issues when compiling framebuffer images, and
they aren't essential. Include them only in ccimx6 images.
This reverts commit 2edb127d28.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also add gtk3+ and clutter demos that depend on wayland since they are also
included in NXP's images.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This saves ~4MB of space and is not required for device detection.
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This variable and all its references were removed in Yocto 2.4
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This class no longer exists, it has been merged with images_types.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Turns out that the busybox' fdisk applet is also able to parse the GPT
partition tables. This saves around 0.5 MiB of space.
https://jira.digi.com/browse/DEL-4565
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
As we are using kernel's DEVTMPFS, using udev-cache on top of it does
not add much advantage. Disabling it has the extra advantage of avoiding
writing the udev-cache tarball under '/etc' (which probably won't work
on a read-only system).
https://jira.digi.com/browse/DEL-3780
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds mdev support into the recovery ramdisk to
mount/unmount storage devices for the firmware up tool.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3692
This recipe is expected to create just an initramfs image, so force the
image FSTYPE with a python anonymous function, so there is no way to
change/append/override it from any other configuration file.
This prevents build failures due to circular dependences if for example
you add:
IMAGE_FSTYPES_append = " recovery.vfat"
to your project's local.conf.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- Include psplash package in the recovery initramfs recipe.
- Start psplash in the recovery init.
- Add new methods to communicate with psplash from the init script.
- Show psplash progress information from the init script.
- Start progress binary to update psplash during a firmware update.
https://jira.digi.com/browse/DEL-3356
Signed-off-by: David Escalona <david.escalona@digi.com>
- This recipe generates the recovery ramdisk image with the contents of the
recovery ramdisk tree (recovery-initramfs) and other packages.
Signed-off-by: David Escalona <david.escalona@digi.com>
Separately add 'dey-gstreamer' to ccimx6ulsbc platform.
This platform does not have 'accel-video' but we want gstreamer
for using it with video/camera.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2358
The u-boot header is required for U-Boot to boot the image in secure boot.
The cpio.gz.u-boot.tf image gets signed and encrpyted if required.
https://jira.digi.com/browse/DEL-3242
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Also change the image type of dey-image-trustfence-initramfs.
https://jira.digi.com/browse/DUB-615
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The ccimx6ul has a small NAND flash rootfs partition, and removing
package-management image feature saves around 10MB.
https://jira.digi.com/browse/DEL-3058
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This recipe builds the initramfs image that is used to boot from an
encrypted rootfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
That restriction does not make any difference in the final image
contents, because no package depending on X11 is added to the image, and
it prevents the image from being built with the default DEY
configuration (that has X11 distro feature enabled).
This also allows to build the image in the buildserver with the same job
that builds other X11 based images.
https://jira.digi.com/browse/DEL-2106
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move this variable to DEY distro conf so that it is available for any
recipe built with the distro.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
This image provides a demo rootfs with QT. It can be built for
framebuffer and also for X11.
https://jira.digi.com/browse/DEL-2196
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So we can build a 'dey-image-graphical' image for framebuffer with
support for QT5.
https://jira.digi.com/browse/DEL-2017
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No functional change, as 'package-management' is added via the included
dey-image-minimal recipe, and 'pointercal-xinput' is a dependence of
xinput-calibrator which is added for X11 images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has a hard-coded dependence in bluez4 and this has been removed from
openembedded-core.
There is a different Jira for the bluez5 migration.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This simplifies the code and as an extra allows to override the default
root password from the project's local.conf (setting MD5_ROOT_PASSWD
variable)
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Changes in Poky (Dizzy) made our SDK unable to build QT applications.
This commit syncs again with upstream so the toolchain is able to build
QT apps.
https://jira.digi.com/browse/DEL-1544
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This can be used as a template for size optimized images. It constraints
the use of X11 related packages and the image types used.
To build, add the following to your conf/local.conf:
DISTRO_FEATURES_remove = "x11"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This allows to easily build QT applications sourcing the toolchain
environment setup script and then running:
$ qmake -project
$ qmake
$ make
https://jira.digi.com/browse/DEL-1003
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We used to have two distros:
DEY: without X11 support
DEY-GUI: with X11 support
After the change, we have just one DEY distro with X11 support. At the
same time add a CONFLICT_DISTRO_FEATURE to dey-image-minimal so it
cannot be built with X11 distro feature enabled. So now in order to
build 'dey-image-minimal':
DISTRO_FEATURES_remove = "x11"
needs to be added to your project's local.conf file.
https://jira.digi.com/browse/DEL-858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Arturo Buzarra
Gabriel Valcazar
Hector Palacios
Isaac Hermida
Jose Diaz de Grenu
Mike Engel
Javier Viguera
David Escalona
Alex Gonzalez