- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
The u-boot-dey recipe is now fully shared by ccimx6 and ccimx6ul platforms
so we can remove the platform-specific appends.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The setting of 'bootcmd' in the script was done using single quotes, which
doesn't expand variables. As a consequence the following variables must
be defined again (during the execution of the second part of the script):
- mmcdev
- INSTALL_LINUX_FILENAME
- INSTALL_ROOTFS_FILENAME
This patch changes the single quotes with double quotes, so that these
variables are expanded during the setting of 'bootcmd' with the values
assigned at the begining of the installation script (notice these are
not dynamically generated so there is no risk to expand them).
At the same time we need to escape with a backslash:
- double quotes containing strings
- variables that we don't want to expand (like the return value $?)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Add semi-colons to instructions inside 'setenv' commands
- Remove semi-colons in instructions where they are not needed (for
consistency with the rest of instructions)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
By default the driver was being compiled with debug messages. Disabled it
but leave the option there so it can be enabled by user.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The ccimx6ul or ccardimx28 do not have hdmi interface, so do not install the
hdmi hotplug script.
https://jira.digi.com/browse/DEL-2654
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The TRUSTFENCE_UBOOT_DEK_SIZE Yocto macro maps to the UBOOT_DEK_SIZE U-Boot
Kconfig entry, which is defined as a choice entry. This makes necessary
to explicitly define the choice Kconfig entry for the configuration to
work.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
There are several possible values for TRUSTFENCE_UBOOT_ENV_DEK:
* Not defined: if the trustfence support is not included.
Should not include the feature.
* 32 characters: when defining a valid key.
Should include the feature.
* "0": when explicitly disabling the feature.
Should not include the feature
* <other>: Invalid value, should trigger the error.
This commits fixes the logic so that 'None' (no defined) is taken as a valid
value.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This commit will add the cryptodev module to the CC6UL kernel to use
the CAAM from user space through this device.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2719
The following utilities are supposed to be available on the environment's
PATH:
uptime, uname, cat, zcat, free, ps, mount, netstat, route, ifconfig, gzip
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit changes the CONFIG_CCIMX6SBC_CONSOLE_ENABLE_GPIO_NR define
into a platform independent setting.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2641
Do not compile the kernel for supporting the static regulatory domain
but force the system to do that by using crda.
https://jira.digi.com/browse/DEL-2539
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The root filesystem can have installed the busybox modprobe implementation or
the kmod modprobe implementation.
Check the version installed and compound the modprobe arguments.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The power regulator connected to the qca6554 chip is always on, which causes
the Bluetooth part to not work correctly after a software-reset.
This commit asserts momentarily the BT_EN line during the start-up sequence
to reset the Bluetooth controller so that it is in a predictable state after a
reset.
https://jira.digi.com/browse/DEL-2623
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add recipe kernel-module-qualcomm to compile kernel module externally with all
the patches for kernel 4.1.15.
https://jira.digi.com/browse/DEL-2653
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We compile those modules as built in to avoid a mismatch
between the current kernel version and the wlan.ko module.
https://jira.digi.com/browse/DEL-2653
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Using native libsdl from the system is showing problems in newer
versions of some operating systems (e.g. ubuntu 15.10). The default in
Yocto 2.0 has changed to build a native libsdl and use it instead of the
one in the system.
This commit synchronizes the config templates to the latest in Yocto
2.0.
https://jira.digi.com/browse/DEL-2586
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of having one default image target for all platforms allow to
define this per platform.
This is needed because for example for the 'ccimx6ulstarter' we want to
define a default command line image instead of a QT-based one.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The CC6UL does not support booting from SD card, so it does not make
sense to create a SDCARD image by default.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There are several possible values for TRUSTFENCE_UBOOT_ENV_DEK:
* Not defined: if the trustfence support is not included.
Should not include the feature.
* 32 characters: when defining a valid key.
Should include the feature.
* "0": when explicetily disabling the feature.
Should not include the feature
* <other>: Invalid value, should trigger the error.
This commits fixes the logic so that 'None' (no defined) is taken as a valid
value.
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
https://jira.digi.com/browse/DEL-2603
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
The steps to set the bluetooth MAC address is send an specific hci command
and an hci reset, so the bluetooth interface need to be up in order to
configure it.
Additionally we have generalized the way to read the MAC address from the
device tree and removed some old code for getting the MAC address in
kernel version 2.
https://jira.digi.com/browse/DUB-595
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add a software workaround to disable the HW flow control because the SOM
revision 3 (and older) has swapped the bluetooth TX and RX lines so we need
to operate in DTE mode which implies that the HW control lines are swapped.
This also implies reducing the baudrate to avoid the need for HW flow control.
https://jira.digi.com/browse/DEL-2611
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Implement the set of TRUSTFENCE_ macros to configure each secure boot feature
available in U-Boot.
https://jira.digi.com/browse/DUB-570
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
sysinfo is a bash script which gathers all the relevant information
from a running system on a timestamped compressed file.
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Victor Rubio Victor.RubioTorroba@digi.com
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds a trustfence class to encapsulate all trustfence
configurations.
https://jira.digi.com/browse/DEL-2257
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Hector Palacios
Isaac Hermida
Diaz de Grenu, Jose
Mike Engel
Alex Gonzalez
Javier Viguera
Jose Diaz de Grenu de Pedro
Victor Rubio