This commit fixes a build issue when this script is installed but not shipped
in the u-boot-tools package.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This reverts commit c5b53c9765.
The HCI reset interface is fixed inside each BT power calibration shell
script, so this workaround is not needed anymore.
https://onedigi.atlassian.net/browse/DEL-8458
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Not only install the US but all the FW files.
Apart of that, some scripts need a little adjustement such as:
* Modify the BT baudrate to 3Mbps for EU power configuration, as it is the
baudrate used by the btnxpuart driver.
* Replace the way to reset the interface on each hcitool command to
avoid missleading BT behaviour.
https://onedigi.atlassian.net/browse/DEL-8458
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit implements the support to sign the different memory configurations for
the CCMP1 platforms, when trustfence is enabled, using FIT images.
https://onedigi.atlassian.net/browse/DEL-8752
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit implements the support to allow different memory configurations for
the CCMP1 platforms, adding support to 512MB and 1GB memory variants for the CCMP15.
https://onedigi.atlassian.net/browse/DEL-8752
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Command 'bootz' allows boot unsigned Linux zImages, so disable it when secure
boot is enabled using FIT images.
https://onedigi.atlassian.net/browse/DEL-8769
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Replace the US-only default CLM blob with the latest one, generated by
Infineon based on the results from Digi Certification of the CCMP1.
New file:
- cyfmac4373-sdio_US.clm_blob (92225a8bccf0c7c9d7df6cdd64670fa1)
https://onedigi.atlassian.net/browse/DEL-8598
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Some minor fixes:
* return error code if installation fails
* cosmetic: update comment with options
* just exit after error and do not execute boolimit command
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
for the IW61x, when the FW is instructed with an hci reset command, the
LE stack is not correctly reset.
It can be workaround-ed by SW doing a SW power cycle.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Murata provides this FW recipe for the infineon chip on the ccmpx products.
Now we are going to have more FW provided by Murata, but for other chips
which recipe is completely different.
Therefore, rename the recipe to explicitily indicate the FW it provides.
https://onedigi.atlassian.net/browse/DEL-8458
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This is an NXP change that reverts a mainline weston commit form v9.0.0, in
which the mouse cursor only gets activated when there is mouse movement. This
change was only being included in the weston v10.0.X i.MX forks.
For platforms that don't use these weston forks (ccimx93 uses the v11.0.X fork
and ccmp15 uses mainline weston), the mouse cursor doesn't load right away when
booting the system, which causes apps that are automatically launched (such as
the LVGL demo) to not register the mouse, rendering said apps unresponsive to
it.
Port NXP's change to all of the weston versions we currently use to avoid this
problem.
https://onedigi.atlassian.net/browse/DEL-8865
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Up until recently, we were only generating dey-image-qt images for the
ccimx93-dvk. Now that we are generating dey-image-lvgl images as well, make
sure to print the helper message to set image-name when installing said images.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The crank engine hasn't been fully tested on these platforms yet, so remove
the image from our default build.
https://onedigi.atlassian.net/browse/DEL-8862
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The display for the cc93 is 'wayland-1'.
Use backslashes before the curly braces to avoid potential expansion by
bitbake variables.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This is to avoid duplicating names with variable DEMO_DISPLAY inside
the lvgl-demo-init script itself.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
One of the conditions used to determine the U-Boot file was missing its
terminator, breaking the script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
New AR6233 chips from Qualcomm require a power reduction in the 2.4GHz
band to maintain a good EVM.
Generate new board data files with this optimized target power
configuration, but do not replace the original board data files so this
change does not affect CC6 modules with the original AR6233 chip.
The new AR6233 will be populated in modules with Hardware Version=6 or
higher. Load one board data file or the other based on the Hardware
Version field of the HWID via a post-installation script.
Board data files with optimized TX Power ('b' files):
- Digi_6203-6233-US_b.bin (MD5SUM: 53db0fba1eea22d5c7248b35669234bd)
- Digi_6203-6233-World_b.bin (MD5SUM: 307ea9e9364c46a243a36124c92cddc2)
- Digi_6203_2_ANT-US_b.bin (MD5SUM: 741f69584f43258ec15bfccaebdb8896)
- Digi_6203_2_ANT-World_b.bin (MD5SUM: 9f89d081aaef7f26292d42ad193c188d)
https://onedigi.atlassian.net/browse/DEL-8851
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The ccimx93 bootloader signing requires this version of the sign script,
but at the moment, the updated script is not compatible with the other
AHAB-based module (ccimx8x), so we cannot just update the recipe for
all modules.
Thus, create a new version of the recipe and use that for the ccimx93
while we still use the old version for the rest of the platforms.
https://onedigi.atlassian.net/browse/DUB-1068
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An additional line was added to a comment block without the '#' character,
resulting in the following error when running the script:
Unknown command '-' - try 'help'
Nonetheless, this error is harmless and the script continues as expected, which
is the reason why we hadn't found it until now.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
There are some cases in which the loading of the Wi-Fi modules may be
problematic due to timing conditions:
- when a suspend operation in progress is aborted
- when Bluetooth is disabled
The Wi-Fi needs some time for the system to be ready before loading the
modules.
This commit:
- Stops the Bluetooth before bringing down the Wi-Fi on suspend
- Starts the Bluetooth (or adds a small delay) before bringing up the
Wi-Fi on resume
- Reworks the way the resume operations are programmed, to do them in
reverse order (first load the Wi-Fi modules, then bring the interfaces
up (if required). It does so by appending/prepending actions into a
variable and dumping the contents finally to a temp file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
In case a HWID is not set or the variant is unknown, do not set it to a default
U-Boot file but ask the user for the proper file.
This case should not happen, but cover it for safety.
https://onedigi.atlassian.net/browse/DEL-8855
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Commit c4f2fce4d3 added logic to do_install()
that saves space by removing board image files that don't match the machine
name. However, the ccimx6qpsbc uses the ccimx6sbc board image file, and it was
being removed from the demo, breaking the demo's landing page.
Avoid this by specifying the correct filename for the ccimx6qpsbc.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The ccimx6ul is the only platform that doesn't include a desktop backend in the
LVGL image, so remove the desktop backend suffix from the image's name. This
affects the image name itself, the corresponding SWU package and the
installation scripts.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
ccimx6ul platform uses the fbdev backend to run LVGL graphical applications,
the mouse input device is not supported by default on this platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit sets the default LVGL demo dimensions to match with the resolution
of the supported LVDS display, showing the application at fullscreen.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds a systemd service and a sysvinit script to initialize the LVGL
demo automatically on boot.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
LVGL graphical library has support for different backends, in the case of the
ccimx6ul we use the fbdev directly, so we don't need the x11 support.
This commit removes x11 support for the ccimx6ul platform for the
dey-image-lvgl image.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Arturo Buzarra
Isaac Hermida
Gonzalo Ruiz
Mike Engel
Stephan Klatt
Gabriel Valcazar
David Escalona
Hector Palacios
Javier Viguera