The btnxpuart driver uses internally the serial port to manage the chip, and
loads the BT FW independently of the WiFi subsystem.
While on it, add support in the bluetooth-init script to be able to power the
chip when the WiFi support is not present.
https://onedigi.atlassian.net/browse/DEL-8632
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not install the combo FW and install the WiFi and BT FW as separated FWs,
so they are managed independently.
Md5sums are:
44cf5535f3b40784296843544eae159e sd_w61x_v1.bin.se
300c739a4e126a8f430001c41e5b3a5f uartspi_n61x_v1.bin.se
Note: currently these FW files are copied manually here, till the github FW
files are updated.
These firmware files come from the package IW612_18.99.2.p19.5.zip provided
by NXP support page.
https://onedigi.atlassian.net/browse/DEL-8632
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The btnxpuart driver is used for the bluetooth chip. We want to control
when to load and unload it, and when power/unpower the chip.
Therefore, blacklist it, so we can manage it in our scripts.
https://onedigi.atlassian.net/browse/DEL-8632
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This wks file creates the required GPT and partition layout
to have a bootable SD card with the following partitions:
- fsbl1
- fsbl2
- metadata1
- metadata2
- fip-a
- fip-b
- u-boot-env
- linux
- rootfs
- data
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8120
This includes NXP's code from the SCFW porting kit v1.15.0, support for
variants with 4 GiB of RAM and a fix for an issue when resuming from suspend.
https://onedigi.atlassian.net/browse/DEL-8604
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds support for environment encryption/decryption of the
u-boot environment on the CCMP1 platform in Linux.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Equivalent commits in meta-freescale:
71d2a1ad49a3e04d0d401d4e9c52d5a50105b6dc
995f2f0a86da9428af348e72e51beb5063ebd729
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This reuses the same variable from sysvinit (USE_VT) to disable running
getty/login on virtual terminals.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When the system runs as read-only with '/etc' overlayfs enabled, '/sbin/init' is not a symlink
to 'systemd', but '/sbin/init.orig' is. This causes the script to wrongly think than 'systemd'
is not being used. The outcome is that partitions are not being automatically mounted in R/O
systems running in mmc with '/etc' overlayfs enabled, as the specific '/usr/bin/systemd-mount'
binary needs to be invoked in these cases.
The proposed fix performs a second check with '/sbin/init.orig' to determine whether systemd is
being used or not. While on it, add an early check to determine if the partition is already
mounted to exit the script.
Signed-off-by: David Escalona <david.escalona@digi.com>
Make a series of changes to make sure the imx-boot signing process works:
* Store separate mkimage logs for each imx-boot build. In our case, this
means storing one log per SoC revision. Each SoC revision has a different
SECO fw binary with varying sizes, which causes offsets of specific
signing regions to differ among revisions. Since we parse the offsets
from the logs, we need to make sure the offset information is correct in
each case.
* Remove u-boot-atf-container.img in each mkimage iteration, otherwise the
ATF offset information will be missing from subsequent logs.
* Implement a separate trustfence_sign_imxboot() function for the ccimx8x
to iterate through all SoC revisions.
Note that the SPL+AHAB signing script doesn't support imx-boot encryption yet.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When building imx-boot images with SPL on the ccimx8x, a different signing
procedure is required. We already have a script for this use case in our U-Boot
fork, so make use of it.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
fill_description copies some artifacts to the images deploy directory,
so that should be created beforehand. Otherwise it may fail on the
'do_unpack' task depending on how bitbake schedules the tasks.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Regulatory domain is now provided as a Kernel parameter, and the
wlan driver uses it to select the correct BDF file, so we don't
need to change the symbolic links to point to one file or another
anymore.
https://onedigi.atlassian.net/browse/DEL-8360
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
New NXP's release is based on upstream v2.8. Use this only for ccimx93,
and keep using the previous Kirkstone release (based on upstream v2.6)
for the rest of the platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Implement a new mechanism to allow users to create update packages based on files and folders to modify
the active system.
This is done through the new class 'swupdate-files', which creates a tar.gz update file in the image
distribution output directory containing all the files and directories to create/update. The 'tar.gz'
file is used later by the 'swu-images' recipe to generate the final SWUpdate package. The SWU package
installation process extracts the tar.gz file in the root folder ("/") of the active system.
Users can specify the list of files and directories to include in the update package using the
'SWUPDATE_FILES_LIST' variable. These files will be directly copied from the generated system rootfs and
placed in the tar.gz archive. Additionally, users can provide their custom 'tar.gz' file to use in the update
by specifying its location in the 'SWUPDATE_FILES_TARGZ_FILE' variable. In any case, all the paths to include
in the update package must be relative to "/", as it is the base directory where tar.gz file contents are
extracted.
The update process for dual boot systems sets a new u-boot flag so that active bank is not swapped once
installation is complete and system reboots.
The SWU update mechanism based on files provides a custom update script which takes care of preparing the
system for the installation process. Just like in the SWU updates based on images, users can customize this
script or override it with the 'SWUPDATE_SCRIPT' variable, specifying the location of the new script to use.
If both the 'SWUPDATE_FILES_LIST' and 'SWUPDATE_FILES_TARGZ_FILE' variables are empty, a standard images
SWUpdate package will be generated instead.
Signed-off-by: David Escalona <david.escalona@digi.com>
Make the 'defconfig' file a real defconfig by including only differences with respect default
values. While on it, improve the recipe:
- Enable 'BOOTLOADERHANDLER' by default in the 'defconfig'. We were unconditionally setting
this value to 'y' in the recipe, so move it to the default configuration.
- Move 'UBI' configuration values to 'mtd.cfg' file to be added only when device filesystem is
MTD based. Until now, 'UBI' support was always added by default.
- Move the 'SIGNED_IMAGES' configuration entry to a '.cfg' file like we are doing with the rest
of the functionallity. Use 'oe.utils.conditional' checking 'TRUSTFENCE' feature for this.
Signed-off-by: David Escalona <david.escalona@digi.com>
Enable scripting support during the installation of system images with SWU. A new shell
script is included by default in all the SWU update packages that will be executed just
before the update starts and just after it finishes. The script is empty and contains two
place-holders that will be called in the two scenarios mentioned before.
Users can customize this script to execute specific actions based on their final product
needs or provide their own one by setting its location in the 'SWUPDATE_SCRIPT' variable.
While on it, rename the 'sw-description_template' file to 'sw-description-images_template'
as it is more accurate with the update mechanism it is used for.
Signed-off-by: David Escalona <david.escalona@digi.com>
This variable is not defined in ccmp1 platforms, making the
swupdate for single mtd failing.
Instead of reading this variable from uboot environment,
determine if the system is multimtd checking the existence
of /dev/ubi1.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Weston is not launched in read-only filesystem because /home/root
is not a writable path.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
We can't run a post installation script in a readonly file system.
We need to provide a configuration file beforehand.
https://onedigi.atlassian.net/browse/DEL-8556
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When EXTRA_IMAGE_FEATURES += "overlayfs-etc" is added these
configurations are needed to compile. They are provided with
the default configuration to work with our software.
The user can modify them in their local.conf if needed.
https://onedigi.atlassian.net/browse/DEL-8552
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
In a squashfs the mount points are different and the current logic
wasn't working.
It's more reliable to check the /proc/cmdline to determine if
the system is a nand or an emmc.
Added also logic to get the active partition in nand devices
when the rootfs is squashfs.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When a squashfs image is flashed we need to delete the compression
field in the swupdate descriptor.
Also the rootfstype u-boot variable needs to be set to squashfs.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When the swu package is generated it needs the right
extension of the rootfs to be formed.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
We no longer need logic to determine the SOM's RAM size and bus width, we only
need to know the SOC revision, which is info that is always available.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Now that both U-Boot and the SCFW can autodetect the RAM configuration, we can
simplify the imx-boot build process to generate two binaries (one per SOC
revision) instead of eight. Build "flash_spl" imx-boot images and use only one
global defconfig for u-boot.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This update includes automatic RAM configuration detection, and only one SCFW
binary is needed for all ccimx8x variants. Adapt the imx-boot recipe
accordingly.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Ensure we leave the Bluetooth interface up after attaching it. If not,
under some circumstances, it could be down.
https://onedigi.atlassian.net/browse/DEL-8608
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Use our custom compile/install/deploy functions from DEY 3.2. NXP's imx-boot
recipe assumes only one U-Boot config and SOC revision, but we have multiple,
so we have to rewrite all of these functions.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For the ccimx8x, we changed the order of the steps in do_deploy() from:
Deploy -> Rename files -> Move binaries
To:
Deploy -> Move binaries -> Rename files
When it's time to rename the files, they won't be in their original place and
the process will fail. Make sure we move the files after they've been renamed
to avoid errors.
Also, one move operation is enough for all artifacts, so remove the second
operation.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Isaac Hermida
Javier Viguera
Hector Palacios
Gabriel Valcazar
Mike Engel
David Escalona
Gonzalo Ruiz
Francisco Gil