This interface should be the last item defined in the
/etc/network/interfaces file.
When you try to enable the interface br0 (bridge interface),
all the other interfaces should be available.
If the br0 interface is located before the other interfaces
involved in the bridge, it will fail.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Digi Embedded Yocto 2.6-r3.1
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Mike Engel <mike.engel@digi.com>
Environment encryption is not yet supported in U-Boot.
Unset TRUSTFENCE_ENCRYPT_ENVIRONMENT on the machine configuration
and remove the platform conditional on the class.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* prefix TRUSTFENCE_ to variable SIGN_MODE for DEY
* prefix CONFIG_ to variable SIGN_MODE for script
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The poweroff command is not available in the initramfs due to a missing
sysvinit/systemd dependency. Use the busybox "halt" command, since it's
available regardless of the init manager used. Rework the error message and
script variables accordingly.
https://jira.digi.com/browse/DEL-6983
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some configuration files inside of the SDK make use of the default SDK
installation path, so some tools might break unless the SDK is installed in said
default path.
Recently, we modified the default installation path to include the platform and
the image type, but the image type was added after the SDK was created, so even
though the environment script's paths include the image type, the "original"
default path in the config files inside of the SDK doesn't include the image
type. A side effect of this is that Qt5 apps cannot be built, since the qmake
and Qt configuration files are pointing to the "original" SDK path.
Remove the image type from the path so that the paths in the SDK's config files
match the real default installation path.
This partially reverts commit be0fe088e3.
https://jira.digi.com/browse/DEL-6972
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
XBEE_RESET_N_GPIO and XBEE_SLEEP_RQ_GPIO can now be comma-separated lists of
GPIO indexes instead of just a single index. Modify the xbee-init script to
support this change and modify the sed script in xbee.bb to allow commas
in the aforementioned variables.
https://jira.digi.com/browse/DEL-6887
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Rework the weston-init recipe and add a BBMASK to ignore meta-freescale's
weston-init.bbappend file.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some .bbappend files for clutter, cogl and mesa recipes are already available
in meta-freescale, so we can remove them from meta-digi. Also remove the
libinput recipe, since a much newer version of it exists in poky.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Userspace firmware loading support is required for the Linux imx-sdma driver.
The patches that accomplish this were originally in poky, but were removed in
the thud upgrade. Re-work the patches so they apply over systemd v239.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, examples such as skeletalanimation are broken.
Reported-by: Alfonso Martin Rey <alfonso.martinrey@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCBRANCH in most recipes and SRCREV for gstreamer1.0-plugins-good.
update imx-gst1.0-plugin to v4.5.2.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCBRANCH in most recipes and SRCREV for gstreamer1.0-plugins-good.
update imx-gst1.0-plugin to v4.5.0.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some architectures like i.MX8M Nano don't have imxgpu2d but still need
some of the Gstreamer plugins.
For example, gstreamer1.0-plugins-bad-meta provides the xwayland sink which
would otherwise not be available for platforms without gpu2d.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Serial support to XBee cellular devices is deprecated since
the recommended communication protocol is USB, so we remove
the udev rules that supported these devices.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This dependency was originally removed in commit
eafa8684a3, but it was erroneously put back in
commit 793e901678 when updating the recipe using
the one in meta-fsl-bsp-release as reference.
Instead of removing the line containing the dependency, in order to avoid the
same situation from happening in the future, comment it out and add an
explanation about why we're removing it.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The .bbappend file in meta-freescale only applies these patches to platforms
with imxqpu2d, but they are necessary to build framebuffer images for the
ccimx8mn. Using the same approach as NXP in meta-fsl-bsp-release (applying the
patches to imxgpu platforms) duplicates the patches for platforms that are both
imxgpu and imxgpu2d, so append them for imx8mn platforms exclusively.
While at it, remove a patch that is no longer necessary, since the latest
versions of qtbase already have the patch's change in them.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches were copied from meta-fsl-bsp-release layer,
but with the latest versions throws a compilation issue with the
ccimx8mn platform. However the upstreamed patches works fine.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
WPA and P2P configuration files are basically the same between all
platforms, so we remove all duplicated files to use a common file
and modify it in the recipe logic.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The systemd class adds by default packages named ${PN} to the
SYSTEMD_PACKAGES variable, but in our case the package name is
'${PN}-init', so it needs to be added explicitly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package needs to be installed in the rootfs for the demos to work.
Reported-by: Alfonso Martin Rey <alfonso.martinrey@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These classes needs to be inherited so the different init services
(sysv, systemd) execute the script on boot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Otherwise there are QA check failures:
package imx-codec-test-bin requires librt.so.1, but no providers found in RDEPENDS_imx-codec-test-bin? [file-rdeps]
package imx-codec-test-bin requires libc.so.6(GLIBC_2.4), but no providers found in RDEPENDS_imx-codec-test-bin? [file-rdeps]
...
This is due to the 'imx-codec-test-bin' package containing NXP-provided
pre-built binaries that are compiled with GLIBC.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Clean up this warning on build:
python3-xbee: No generic license file exists for: MPL2.0 in any provider
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Update the README as well to reflect this change, since the ftp protocol might
be blocked in some corporate networks.
https://jira.digi.com/browse/DEL-6880
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since the final image name is not available in a global scope, append it to the
default installation path in the SDK extraction script once it has been
packaged.
The new default installation path format is:
/opt/dey/<version>/<platform>/<image>
https://jira.digi.com/browse/DEL-5264
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The previous patch was outdated, but now that we have a working PKCS11 engine
and the cryptochip supports it, update the patch with the new engine info.
https://jira.digi.com/browse/DEL-6835
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version Microchip recommends to use in for the newer cryptoauthlib
with pkcs11 support. This recipe was backported from the zeus branch of
meta-openembedded.
https://jira.digi.com/browse/DEL-6826
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package has not been supported since OpenSSL was updated to v1.1.x, and it
has been deprecated by Microchip.
https://jira.digi.com/browse/DEL-6826
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Added QtQuickControls package on framebuffer images for ConnectCore 6UL
platform to improve the user experience. It is not added to X11 images due
to size limitations.
https://jira.digi.com/browse/CC6UL-1108
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In very rare cases, random services would hang when powering off the system,
causing the poweroff process to stall for 90 seconds before timing out the stop
job. To avoid this behaviour, minimize the effect of these random freezes by
decreasing the timeout.
The default services in our system take well under 15 seconds to stop
gracefully, so we can guarantee that a timeout will never happen under normal
circumstances.
https://jira.digi.com/browse/DEL-6794
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, systemd will have to guess the PID of the service's main process.
It guesses right most of the time, but sometimes it chooses the PID of the
original pulseaudio process instead of the daemon that gets forked off. This
caused the daemon to stop immediately after starting, breaking other apps that
require the pulseaudio server to be running.
Since the PID file is created in a user-specific runtime directory (and the
service is meant for the whole system), modify the wrapper script to create
a symlink to the PID file in a place where it can be obtained by systemd.
https://jira.digi.com/browse/DEL-6795
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Otherwise, systemd will have to guess the PID of the service's main process.
It guesses right most of the time, but sometimes it chooses the PID of the
original pulseaudio process instead of the daemon that gets forked off. This
caused the daemon to stop immediately after starting, breaking other apps that
require the pulseaudio server to be running.
Since the PID file is created in a user-specific runtime directory (and the
service is meant for the whole system), modify the wrapper script to create
a symlink to the PID file in a place where it can be obtained by systemd.
https://jira.digi.com/browse/DEL-6795
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The default service only starts once per non-root user. Add a service that
starts pulseaudio by default along with a wrapper script that sets the
necessary environment variables before launching the daemon.
https://jira.digi.com/browse/DEL-6746
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Use ifupdown variable 'p2p-network-id' to pass a WPA supplicant network
id, to pre-populate some parameters (SSID/passphrase) when creating the
group where this device is the GO.
Also replace go_intent=7 with the auto parameter. According to the
documentation:
"auto" can be used to request wpa_supplicant to automatically
figure out whether the peer device is operating as a GO and if so,
use join-a-group operation rather than GO Negotiation.
https://jira.digi.com/browse/DEL-6741
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes the error message when specific network scripts
are launched.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6728
This was reported by the build:
Some of the context lines in patches were ignored. This can lead to incorrectly applied patches.
The context lines in the patches can be updated with devtool:
devtool modify <recipe>
devtool finish --force-patch-refresh <recipe> <layer_path>
This is the result of running the above commands to have
the patches automatically updated on their context lines:
devtool modify weston
devtool finish --force-patch-refresh weston meta-digi-dey
While on it, remove also the initial "From <SHA1>" lines.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add support for greengrass 1.9.2 and remove it for 1.9.0.
Support for 1.9.0 was never released and that version is
no longer available.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The most current revision is incompatible with the v4.9 Linux UAPI. Reverting
to the previous commit of the imx-alsa-plugins repo reverts the UAPI changes
while keeping the same functionality, so use this revision for the ccimx6 and
ccimx6qp.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Latest meta-fsl-bsp-release tag 'rel_imx_4.14.98_2.1.0' replaces the
imx-alsa-plugins recipe from the meta-freescale upstream layer to fix
the build with the kernel 4.14. The commit cde60d6 ("asrc_pair: update
according to latest mxc_asrc.h") fixes the build issues.
https://jira.digi.com/browse/DEL-6732
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Trustfence is not yet fully supported for the CC8X.
Retore the warning.
This reverts commit 78534ca779.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Update SRCREV and SRCBRANCH in most recipes. Update imx-gst1.0-plugin to
v4.4.7.
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Change the recipe name to an older version (v6.2.4.p1.8). This is done because
there haven't been any changes in the source code since said version.
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update to v6.2.4.p4.2. Make sure to keep the "wayland" distro feature check
out of the recipe to be able to compile framebuffer images for the ccimx8x.
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The correct recipe that need to be used is located at
meta-digi-dey/recipes-qt/demo-extrafiles/
removing all the QT applications that are not included anymore in
rootfs.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6690
This commit enables gstreamer support when built qtmultimedia. Also
sets the gstreamer plugin video source for QT.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6691
Otherwise, users that are behind corporate firewalls might not be able to
obtain the package sources.
https://jira.digi.com/browse/DEL-6663
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This way, we assure that the openssl binary is included in the rootfs whenever
the base openssl package is included.
https://jira.digi.com/browse/DEL-6710
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove the 'mstructure-size-boundary' flag. This flag is not supported in
ARM64 toolchains, and without it the fbtest application works fine.
https://jira.digi.com/browse/DEL-6498
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Commit c6e963f9e ("lvm2: Add RDEPEND on lvm2 to lvm2-udevrules")
in meta-oe layer added a package dependency for lvm2. This dependency
includes many unnecessary packages like lvm2, lvm2-scripts, etc.
and their dependencies that increase the size of the initramfs image.
Since lvm2-udevrules is not necessary for our initramfs image,
this commit removes the RRECOMENDS.
https://jira.digi.com/browse/DEL-6701
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 074e3ba3 ("meta-digi-dey: add cryptsetup tool into initramfs") added
the runtime dependency to cryptsetup for all platforms, but it is
required only to encrypt/decrypt block devices.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit disables file system check on the root file system when it is encrypted.
This prevents the service from failing on encrypted rootfs with the message:
[FAILED] Failed to mount /run/media/mmcblk0p3.
See 'systemctl status run-media-mmcblk0p3.mount' for details.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6655
The functionality provided by this bbappend is now available in meta-oe
upstream, commit 7f17da154372b5ec33947766783444961e8aa67c.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
After some fixes to cloudconnector, all packages compile with the standard
GCC version in Yocto Thud (gcc 8.2).
Some other packages are broken if we do not use the expected GCC version for
Thud. Specifically, this was detected trying to compile docker.
This reverts commit ddd14144c3.
The artifacts that must go inside the installer ZIP image are not anymore
the ones in UBOOT_CONFIG. For CC8X, the artifacts are combinations of
UBOOT_CONFIG and RAM_CONFIGS.
This commit adds a function 'get_bootable_artifacts()' to boot-artifacts class
to generate a new variable BOOTABLE_ARTIFACTS with the list of bootable
artifacts DEY produces.
The installer recipe can then simply iterate on that list, rather than
needing to calculate it by itself.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
A variable called IMAGE_BOOTLOADER was being used without distinction for
referring to two different things:
- the recipe that builds the bootable artifacts
- the prefix of those artifacts
The value of this is "u-boot" for most platforms, but "imx-boot" for the
CC8X based platforms.
The name of the variable is misleading, so this commit splits it into two:
- BOOTLOADER_IMAGE_RECIPE, to refer to the recipe
- UBOOT_PREFIX, to refer to the prefix of the bootable artifact
With the separation, the variable UBOOT_SYMLINK becomes a generic formed
one, so it is moved to digi-defaults.inc.
While on it, fix the image_types_digi.bbclass which was not making use of
the original variable to establish all the dependencies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit exports several internal headers and libraries
to allow link against them in user applications.
https://jira.digi.com/browse/DEL-6649
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These packages are included in ccimx6/6qp/6ul images because they are a part of
packagegroup-core-x11-sato, which isn't included in ccimx8x images. To assure
that pulseaudio always gets included in non-fb images, add it as a dependency
in packagegroup-dey-audio.
https://jira.digi.com/browse/DEL-6464
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since the original .bb file is already in the meta-digi layer, bitbake will
look inside of the bluez5-5.41 folder by default, so this line isn't needed.
https://jira.digi.com/browse/DEL-6448
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit modifies the weston ini file to support a custom
background and includes a new one with Digi branding.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Modify bluetooth init script to use kernel module to power on/off
the bluetooth chip instead of managing it directly from sysfs.
https://jira.digi.com/browse/DEL-6615
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These icons have never been included in the filesystem until a recent commit in
poky (522b0d8615cdc6645f6dc37a03ea7584f19c7bfc). In total, they take up over
1 MiB and have been causing filesystem tests to fail on the ccimx6ul due to low
space.
Add a .bbappend to undo the commit's changes in our layer.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This fixes the problem of shell console returning to the login prompt
after a successful login.
Signed-off-by: David Escalona <david.escalona@digi.com>
To avoid possible conflicts with NetworkManager, remove systemd-networkd
entirely.
https://jira.digi.com/browse/DEL-6610
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
-p : Test the standard periodic interrupts (uses timers, doesn't wake from low power)
-u : Test the standard 1 Hz interrupt (uses RTC ALARM)
-v : Test MCA periodic interrupts (uses RTC PERIODIC_IRQ)
-w : Test MCA 1 Hz interrupt (uses RTC 1HZ)
https://jira.digi.com/browse/DEL-6602
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
The Replay Protected Memory Block (RPMB) is an special storage
partition that cannot be accessed via standard block layer.
When a user space tool like blkid, tries to read it the kernel
suffers buffer I/O errors and timeouts.
This commit modifies the post installation script to filter the RPMB
partitions from the mmc block devices, to avoid multiple kernel
errors during the script execution.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed the platform dependency to apply the resize to all platforms.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Replay Protected Memory Block (RPMB) is an special storage
partition that cannot be accessed via standard block layer.
When a user space tool like blkid, tries to read it the kernel
suffers buffer I/O errors and timeouts.
This commit modifies the post installation script to filter the RPMB
partitions from the mmc block devices, to avoid multiple kernel
errors during the script execution.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed the platform dependency to apply the resize to all platforms.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe is an example for customer for a system-monitor. Scripts that
verify the system status can be added to /etc/system-monitor.d
The recovery mechanisms can be implemented on those scripts or in the
system-monitor script. The software watchdog systemd support is used to
guarantee that the system-monitor is running.
When using this it is recommended to enable the systemd hardware watchdog
support, refer to the systemd documentation for this.
The systemd service provided by this recipe is not enabled by default as it
is an example that needs customization.
https://jira.digi.com/browse/DEL-6593
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Also create the folders that contain the scripts attending each
dispatch event type.
https://jira.digi.com/browse/DEL-6575
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of the 20 seconds hardcoded currently in the code, allow to
configure the response timeout in the connectivity section of the main
NetworkManager config file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently in a systemd based init, the httpd server is not launched. A
systemd service is needed, so add it.
Also install a CGI script that allows to use the device for the
NetworkManager connectivity check.
https://jira.digi.com/browse/DEL-6577
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe is an example for customer for a system-monitor. Scripts that
verify the system status can be added to /etc/system-monitor.d
The recovery mechanisms can be implemented on those scripts or in the
system-monitor script. The software watchdog systemd support is used to
guarantee that the system-monitor is running.
When using this it is recommended to enable the systemd hardware watchdog
support, refer to the systemd documentation for this.
The systemd service provided by this recipe is not enabled by default as it
is an example that needs customization.
https://jira.digi.com/browse/DEL-6593
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Also create the folders that contain the scripts attending each
dispatch event type.
https://jira.digi.com/browse/DEL-6575
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of the 20 seconds hardcoded currently in the code, allow to
configure the response timeout in the connectivity section of the main
NetworkManager config file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently in a systemd based init, the httpd server is not launched. A
systemd service is needed, so add it.
Also install a CGI script that allows to use the device for the
NetworkManager connectivity check.
https://jira.digi.com/browse/DEL-6577
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There's a recipe in the thud branch of meta-openembedded specifically for the
opencl-headers package, but it's also provided by imx-gpu-viv. This generates
build errors when parsing the recipes and when populating the sysroot for
opencv.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Make our vulkan sub-folder match NXP's by updating recipes, deleting ones that
are no longer needed and adding new ones. Also, stop forcing 1.0.65% as the
preferred vulkan version.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Change the .bbappend name so it's compatible with all versions of the package.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Change the .bbappend name so it's compatible with all versions of the package.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
The code revision is exactly the same as the one in v6.2.4.p2.3, so simply
rename the recipe and delete files that are not necessary anymore.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Instead of having one common .inc file and one .bb file per architecture,
we now have one common .bb file for both architectures.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The watchdog and ADC devices were not being modified to belong
to 'digiapix' group, so the examples did not run properly when
ran as a user different than root.
Reported-by: Andreas Burghart <andreas.burghart@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6581
This patch is included in the rocko and sumo branches of poky to avoid errors
when starting an xserver using DRI, but it was removed in the thud branch in
favor of newer input methods other than SIGIO. SIGIO is still supported, but
not explicitly in the xserver configuration.
Since the vivante driver on the i.MX6 is using DRI and, by extension, SIGIO
(even though there is no way to configure xserver to enable SIGIO support), the
only way to make xserver start correctly is by removing the SIGIO support check
in the code.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Even though systemd support is not yet available for these platforms, add the
scripts so bitbake doesn't fail when building the busybox package.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
* Use the same operation order when resuming interfaces
* Remove unnecessary delay in ccimx6sbc standby script
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, bitbake will try building the aarch64 version of the package and
fail when building ccimx6 images.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The exported PWM channels now report the channel name under udev
EXPORT parameter.
Add the 'change' udev action type to the udev rules and use that
parameter to change the group ownership of the PWM channels to
digiapix group, so they can be used by non-root user.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For some reason, even though the general RDEPENDS for this package is correct,
all items are overwritten by the empty class-native version of RDEPENDS, even
when building for the target. Because of this, whenever this python module is
installed and used, it won't work.
Redefine the dependencies needed by the target until the issue is fixed
upstream.
https://jira.digi.com/browse/DEL-6553
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some modems take a lot of time to initialize and ModemManager won't
see them on its first scan.
This service will force a rescan 40 seconds after boot, to give
enough time for those lazy modems.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
This recipe adds a script and a related systemd service that
configures two GPIOs (user defined, or else platform-defaults) as
output and sets them to the appropriate value for initializing the
XBee socket:
- XBEE_SLEEP_RQ: is set low, for running the XBee
- XBEE_RESET_N: is set low and then high, to reset the XBee
The service triggers on the condition that the UART TTY device node
pointed to by variable XBEE_UART exists.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
On the default device tree, the MCA UART that's connected to the
XBee socket is enabled. This registers as ttyMCA0.
Add a udev rule for this path so that ModemManager checks for
modems in this serial port.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
With the re-organisation of the python3 packaging, some of the
packages have disappeared and are now part of base packages.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Otherwise, packagegroup-dey-core won't get included in ccimx6ulstarter images.
This packagegroup contains fundamental OS elements, such as sysvinit, kernel
modules and so on. Use CORE_IMAGE_BASE_INSTALL instead and make sure to append
to the default value instead of overwriting it.
https://jira.digi.com/browse/DEL-6536
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For CC6/CC6Plus
- Add USER_LED0 alias (same as default USER_LED)
- Change aliases of the other LEDs to USER_LED1 and
USER_LED2 (without additional underscore and fixed
indexes, to match the board schematics)
For CC8X SBC Pro
- Add USER_LED0 alias (same as default USER_LED)
- Add USER_LED1 which was missing
- Increase indexes (due to removed MCA_IO19 on SOM v3)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This modifies the behavior of the sd-resolve libsystemd component to prevent
the system from freezing whenever a service that uses said component is
stopped. Even though this doesn't free the terminated thread's resources
properly, this procedure only gets executed during the final moments of a
service's process before it exits, so resource leaks aren't an issue.
https://jira.digi.com/browse/DEL-6523
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes the following examples that were accessing
hardware interfaces:
- dey-examples-adc
- dey-examples-can
- dey-examples-gpio-sysfs
- dey-examples-spidev
- dey-examples-watchdog
The recipe 'dey-examples-digiapix' builds similar examples that make
use of Digi's APIX for accessing the hardware. Add this recipe to images
- dey-image-qt
- core-image-base
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5169
This reduces the number of files that must be modified when changing
branches between development/release modes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Organize the common code in the recipe to make easy the
inclusion of new greengrass versions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This way, the wlan1 interface will only be created whenever a user wants to
bring the interface up with ifupdown. Modify the script to be able to delete
the interface whenever it gets brought down and remove its .sh file extension
so run-parts can run it properly during the ifup process.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Tests have shown that having this interface up hinders wlan0's performance,
so don't bring it up by default.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update u-boot-fw-utils patches to apply on current upstream version. Remove
recipe for version 2017.09 since both U-Boot v2017.03 and v2018.03 work fine
with the newer version.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This version is only required to build U-Boot 2017.X, so select it as preferred
version only on those platforms that build this U-Boot (CC6 and CC6UL).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The device-tree being used on a system is a very important piece of
information to debug issues. On a host machine, dtc can be used to
reconstruct the DTS used from the /proc/device-tree folder structure.
While on it, remove extra white lines at the beginning and end.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This script introduces a minor delay when the own script
launch the wpa_supplicant daemon, however this minor delay
is needed in the boot process when the wireless interface
is loaded, if not the bridge mechanism throws an unexpected
error trying to add the interface to the bridge before the
wireless is ready to use.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since our initscript contains logic to dynamically generate the path containing
the greengrass daemon (it changes depending on the version), keep it in the
rootfs. Create a symlink to it inside of /etc/init.d for sysvinit images and
create a systemd service wrapper that calls it on systemd images.
https://jira.digi.com/browse/DEL-6510
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Soften the dependencies between the services and start the bluetooth stack
regardless of the existence of a bluetooth chip. Also, update the standby
script to reflect that there is no longer a strong dependency between the
services.
https://jira.digi.com/browse/DEL-6452
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Unlike eudev, which is used on images without systemd, the list of paths
systemd-udev uses to look for rules is very limited. Include an upstream patch
(commit 116b91e8ccfee1d44fc2b140d831d688e3747902 in the systemd repo) that
expands said list.
This fixes an issue with crda's regulatory domain rule file, which was being
excluded due to it being in a path systemd-udev was ignoring (/usr/lib/udev).
Because of this, the regulatory domain was never set properly and hostapd was
failing when configured to use 5GHz channels (which is the default config).
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
To avoid bringing up interfaces before they're created by udev scripts
(specifically wlan1), wait until udev settles before starting the service.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When using systemd, putting the wlan1 interface up wasn't working because it
was relying on initscripts that are no longer in the filesystem.
Add a parametrized version of the upstream hostapd service to be able to use a
configuration that's different from the default one. Also, modify the
generation of the wlan1 entry in /etc/network/interfaces to be able to use
different post-up/pre-down hooks depending on the init manager that's being
used.
https://jira.digi.com/browse/DEL-6504
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This change was added to meta-openembedded layer by commit
0814df2e9179b71b5f5c99b962aca35ede1f242f.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since the version 1.12, NetworkManager enables the colors in the
terminal output by default. This pretty output is not compatible
with several terminal emulators and makes it difficult to parse
the output of the CLI commands.
This patch uses the standard linux util called 'terminal-colors.d'
to disable the colors by default in the NetworkManager CLI interpeter.
https://jira.digi.com/browse/DEL-6473
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Latest update to version 1.29.3 in upstream breaks the compatibility
of our bbappend, to avoid it in future updates, this commit
generalizes the bbappend to apply all the 1.29 series.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add pulseaudio audio profile for MAX98089 sound card and
generalize the recipe to support multiple platforms with
the same audio sound card.
https://jira.digi.com/browse/DEL-6461
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The driver now builds directly from the kernel source and the
fixes are already included in the kernel tree so there is no need
to build the module externally.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6460
(cherry picked from commit a0990a7e1dcd03af239efb620b83b7dee126484e)
This is a user space tool to manage BATMAN advanced network interfaces.
https://jira.digi.com/browse/DEL-6466
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
systemd-tmpfiles throws warnings of /var/run being deprecated in favor of /run.
Even though this is corrected automatically, the warnings appear several times
during runtime, polluting the systemd journal.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Similar to what we did on sysvinit, stop dnsmasq from starting automatically
on boot so NetworkManager can launch it via dbus.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The postinst script tries parsing the wireless MAC address from the sysfs, and
in case of failure, obtains a random string from /dev/urandom. This caused two
problems when booting with systemd:
* The wifi interface's sysfs entry is not available because the interface
hasn't had time to start up yet, forcing the script to always resort to the
/dev/urandom fallback.
* Even though the postinst scripts are run after populating the volatile
filesystems (as can be seen in run-postinsts.service's dependencies), trying
to read either /dev/random or /dev/urandom at this point in the system's
initialization causes it to lock up indefinitely.
To avoid either situation, add the following changes:
* Immediately exit when running on a non-wireless target, as the script isn't
necessary in this use case.
* Parse the wireless mac address from /proc/device-tree/wireless, which is
guaranteed to always be available when the script runs. By doing this, we can
remove the /dev/urandom fallback entirely.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This script behaves the same way as our custom standby script, with a few
modifications, for example:
* instead of using initscripts to stop/start daemons, it uses systemctl calls
* save variables that are needed when resuming in /tmp, because the script is
executed twice instead of once (when suspending and when resuming)
* remove the locking/unlocking of the critical section and the actual state
change, since that is handled by systemd-suspend now
Also, add a different standby script for when systemd is enabled. Said script
acts as a wrapper for systemd's suspend mechanism.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These changes are needed in order to achieve a behavior similar to our
bluetooth initscripts'.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This service acts as a systemd replacement for our bluetooth-init initscript.
All it does is call the initscript before starting the bluetooth stack.
Since initscripts dissapear from /etc/init.d when disabling sysvinit, move the
script to /etc/. Also, include bluez5-init as a packagegroup-dey-bluetooth
dependency regardles of whether systemd is enabled or not.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches don't apply on the latest version of systemd used in Yocto 2.6.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without systemd, our KEY_POWER events were handled by the ACPI daemon, which in
turn issued a "poweroff" command. With systemd, the ACPI daemon is no longer
available and the events are handled by systemd-logind instead, which also
powers down the system properly. However, NXP added a patch that prevents
system-logind from handling the events, since they use the sc_powerkey instead.
Remove this patch to be able to power the target off via our power button.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, there will be errors due to missing dependencies.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These have been ported directly from NXP's meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since poky commit b6fbb3f3d4d6367b0fd7921078f67057551c7ede
reboot config was moved to init.cfg to provide this configuration
when busybox is selected as the init manager, however it is needed
for initramfs images where no init manager is set (see poky commit
ef4a417ab04779bd9fc8a6540a20cca7d14e98cf).
https://jira.digi.com/browse/DEL-6451
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since commit 4b41d9072a304fadbe1cc37c94575f12a2a47fd3 in poky
busybox removes the RRECOMENDS dependency with busybox-syslog,
then we need to explicitly add this dependency in the recipes.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove git recipe to use the official 1.8.2 release and update
udev rules file to blacklist the network interfaces that ModemManager
must not manage.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 491082c56ce34f3fd644f8d4457ccd52af951087 in poky layer enables
by default some security enhancements and optimizations for the compiler,
These extra checks added by the flag -D_FORTIFY_SOURCE=2 break the
CloudConnector build. This commit disables the extra validations only
for the CloudConnector recipe.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed patches already integrated in the OpenSSL code and
refreshed the necessary ones.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Francisco Gil
Mike Engel
Arturo Buzarra
Hector Palacios
Gabriel Valcazar
Hector Bujanda
Javier Viguera
Jose Diaz de Grenu
David Escalona
Gonzalo Ruiz
Alex Gonzalez