The XBee Cellular modem is expected to be at ttymxc1 on CC6UL and
at ttymxc4 on CC6. The changes are needed because in v4.9.11 kernel
the /sys/devices entry for CC6UL and CC6 are the same for the TTYs,
causing that on CC6UL ModemManager was also searching for modems on
ttymxc4.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/DEL-5163
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The experimental flag is needed to run the GATT server application.
https://jira.digi.com/browse/DEL-5023
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit enables the IPV6 support that is necessary for the
XBee Cellular LTE Cat1 modem.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-4839
This is needed in the context of network failover, so when one physical
interface is lost, you can still resolve the connectivity-check URL
using the local DNS cache.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The implemented patch fails when NetworkManager uses a local DNS cache
underneath (like 'dnsmasq'). To access the local DNS cache it needs to
use the loopback interface and hardcoding the physical interfaces make
the connectivity check fail.
This reverts commit c9b02d6288.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the same interface that it's being checked for the DNS resolution.
This makes connectivity check work in an scenario where the primary
interface has lost connectivity (for example ethernet) but you still
have connectivity through a secondary interface (e.g. wireless).
What happens in that case is that even though you have correct
connectivity in the secondary interface the check fails because it does
not use that secondary interface to resolve the name of the test URL.
The result is that the connectivity check assumes that this secondary
interface is also failing and it penalizes the metrics in the routing
table.
This commit uses libcurl's CURLOPT_DNS_INTERFACE to set the DNS
interface. Notice that this requires 'libcurl' to be compiled with
'--enable-ares'.
https://jira.digi.com/browse/DEL-4787
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If two or more targets are in the same environment, all of them will
broadcast the same SSID, which may be a problem when a client wants
to connect to a specific device.
Use the last bytes of the non-virtual wireless MAC for the name of the
SSID, a random value with no hexadecimal characters is used if the MAC
is not available.
Also drop 'wpa2aes' from the SSID.
https://jira.digi.com/browse/DEL-4129
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
NetworkManager manages the 'resolv.conf' file globally, so there is no
need for pppd specific scripts for DNS.
These scripts race with NM to set DNS, leading sometimes to a scenario
where you have ethernet as the default gateway, but with DNS only
reachable via cellular.
While on it, also remove not used 'mm_cellular' configuration file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Some modems (e.g. the XBee Cellular LTE Cat 1) have a long initilization
process and are not available when ModemManager tries to detect them
on boot.
For those modems schedule a rescan a bit later after NetworkManager has
been launched, so they are detected properly.
https://jira.digi.com/browse/DEL-4661
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These values configure the PPP daemon to check that the connection is
still alive (using an echo) and kill itself otherwise. On that event,
NetworkManager takes over and tries to restore the connection.
This is specially useful for modems with only one serial port, because
they are not able to signal the connectivity loss to the host (the only
data channel is used for the network data itself).
https://jira.digi.com/browse/DEL-4653https://jira.digi.com/browse/DEL-4650
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Use the 1.8.x stable series, as it has some desired functionality (e.g.
connectivity check) and bug fixes over the default version included in
Yocto.
https://jira.digi.com/browse/DEL-4628
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For P2P interfaces, some drivers (CC6UL) create auxiliar interfaces based
on the parent one, like p2p-p2p0-0.
This commit adds a p2p* pattern to the list of unmanaged devices so that
NetworkManager doesn't try to manage P2P devices.
https://jira.digi.com/browse/DEL-4649
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
When bringing down the wireless interface used for hostapd, the messages
overlap:
# ifdown wlan1
Stopping HOSTAP Daemon: stopped /usr/sbin/hostapd (pid 569)
hostapd.
Adding the 'quiet' option to start-stop-daemon command fixes the
cosmetic issue.
# ifdown wlan1
Stopping HOSTAP Daemon: hostapd.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
"glibc-gconv" packages are GLIBC library specific, so add the proper
override to fix the build of the package using other C libraries (e.g.
MUSL).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The cellular interface is now managed by NetworkManager, so there is no
need for this custom script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the package can be compiled in a non-X11 graphical system.
https://jira.digi.com/browse/DEL-4289
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Disabled: dnsmasq and netconfig
* Enabled: cellular related options and connectivity check
https://jira.digi.com/browse/DEL-4289
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Avoid splitting the boot script message in two different lines:
Starting bluetooth hardware: [OK]
done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
After 0e7f5d3a47 both platforms probe both ports,
which is problematic (for example, ttymxc4 is the console in the 6UL based
platforms).
Use more concrete rules to avoid that problem.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
After the kernel update (v3.14 to v4.1) the sysfs path changed from:
/devices/soc0/soc.0/2100000.aips-bus/21f4000.serial/tty/ttymxc4
to:
/devices/soc0/soc/2100000.aips-bus/21f4000.serial/tty/ttymxc4
which caused the XBee Cellular not to be detected on the new kernel. These more
general rules are compatible with both kernels.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
mbedTLS is an open source, portable, easy to use, readable and flexible SSL
library.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
QMI modems didn't work with the version of
modemmanager that the dey-2.2-r1 release was
using.
We were using two patches for uBlox plugin to use XBee Cellular 3G
that are now merged in modemmanager master.
This updates modemmanager to use the commit where QMI
problem was fixed and also include uBlox patches.
https://jira.digi.com/browse/DEL-4192
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
Add patch to MM, so it detects the U-Blox modem connected to the XBee
socket.
https://jira.digi.com/browse/DEL-4084
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The XBee Cellular needs more time to settle down before MM is able to
detect it on boot. As this is connected to one of the 'ttymxc' serial
ports, use that port to conditionally delay the launch of MM.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Adding more retries to the port AT probing has an impact in modems not
using serial drivers (for example using qmi, mbim). It takes longer for
MM to detect those modems and then user space gives up waiting for the
modems to be available.
This reverts commit 682d77e414.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The following changes have been made to the bluetooth-init script:
* Remove "hciconfig hci0 up/down" and this is now deprecated and likely
to fail. We use the AutoEnable feature of bluetoothd for this now.
* Move setting the MAC address to hciattach instead of using hcitool.
* Remove resets performed by hcitool and hciconfig. The hciattach
application already performs a reset and that should suffice.
* Remove hciattach retries.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commits adds patches to hciattach for the following:
* Strict flow control setting
The hciattach application has a flow | noflow command line argument that is
currently only applied on the first configuration of the uart port. The
hciattach_rome plugin ignores this setting and assumes hardware flow
control is always supported. This commits makes hciattach obey the user flow
control indication.
* Modify hciattach_rome to set MAC address. The MAC address setting
feature in the rome plugin now works with the command line specified
MAC.
* Reduce verbosity. hciattach now accepts a "-v" verbose flag. By
default verbose output it omitted.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Sebastian Pastor
Arturo Buzarra
Isaac Hermida
Mike Engel
Javier Viguera
Jose Diaz de Grenu
Tatiana Leon
Salvador Penalva
Alex Gonzalez